New K210 keeps playing a Lenovo ad after 10 min of idle time

New K210 keeps playing a Lenovo audio ad after around 10 minutes of idle time. Touch any key it goes away. I want it to go away forever. Any suggestion on how to fine where it is to remove it? Thanks John

Just a thought...have you checked the screensaver?
Ed Shumpert
Thinkcentre/Desktops Launch Readiness Program Manager
US Service & Support

Similar Messages

  • ASA - log users out of ASDM after 10 mins of idle time?

    Hello,
    How can I get idle users logged out of the ASDM after 10 mins?
    I have SSH and the console set fine, but not the ASDM.
    Many thanks

    Hi Andy,
    You can increase the ASDM timeout value by the command:
    http server idle-timeout
    Here's the ref:
    http://www.cisco.com/en/US/docs/security/asa/asa82/command/reference/gh.html#wp1782511
    The default value is 20 mins
    Hope that helps,
    Rate if helpful..
    Thanks,
    Varun Rao
    Security Team,
    Cisco TAC

  • HT4211 My audio apps keep playing in the background after I answer a phone call. How do I turn this off?

    My audio apps keep playing in the background after I answer a phone call. How do I turn this off?

    Hello BobWeaver,
    It sounds like we need to troubleshoot the software on your device as that is not expected behavior.
    I would perform steps 1, 3 and 5 from the iPhone Troubleshooting Assistant found here http://www.apple.com/support/iphone/assistant/phone/. If you get to step 3, then I suggest closing all the apps. Here is step 1 to get you started:
    Restart iPhone
    To restart iPhone, first turn iPhone off by pressing and holding the Sleep/Wake button until a red slider appears. Slide your finger across the slider and iPhone will turn off after a few moments.
    Next, turn iPhone on by pressing and holding the Sleep/Wake button until the Apple logo appears.
    Is iPhone not responding? To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears.
    If your device does not turn on or displays a red battery icon, try recharging next.
    Cheers,
    Sterling

  • SSRS sharepoint integrated report refershes after 60 secs of idle time

    Hi All
    we have SSRS 2012 report integrated with sharepoint 2013  in which when we click on any toggle item after some idle time of 60 secs then  it refreshing complete report .
    what we observered.
    1. there is no problem when we expand toggle items without idle item.
    2. when we open the report ond expand few toggles and keep idle for 60 seconds and try to expand another toggle item then  complete report refresh is happening with all toggle items are collapsing.
    3. If you keep idle for 60 minutes and if you didnt do any action like expanding toggle items it is not refreshing.
    why it is happening how to stop that complete refresh.
    Surendra Thota

    Hi Surendra_Thota,
    According to your description, there is SSRS drilldown report of sharepoint integrated mode, when you expand toggle after 60 seconds idle time, the report will be completely refreshed, and all toggle items are collapsed.
    The report session keeps alive by pinging the server periodically for every N-1 second, where N being the timeout of the session set within Reporting Service. In this case, the report session has already expired in one minute and hence whenever we access
    the page after one minute, the report will be completely refreshed. To solve the problem, we can increase the report session timeout for Reporting service 2012 in SharePoint integrated mode by following steps:
    Browse the SharePoint central administration URL and navigate to Application Management -> Manage service applications (Under Service Applications).
    Select the Reporting services service application and click on manage.
    Click on System Settings.
    Locate the Session Timeout setting. We can change it to 1200.
    Click on OK.
    If you have any more questions, please feel free to ask.
    Thanks,
    Wendy Fu
    If you have any feedback on our support, please click
    here.
    Wendy Fu
    TechNet Community Support

  • Keyboard does not function after mac mini goes idle

    Hi. Interesting issue. New keyboard on my mac mini. Identification of keyboard (cheap Dynex) works fine. If I let mini go idle/screensaver, when it wakes up, it does not recognize the keyboard at all. Cannot manually force it to recognize either. Restart works like a charm and all is good until it goes idle again.
    Anyone seen this? Any ideas?
    Thanks.

    I used a couple of cheapo PC oriented USB keyboards when I got my first Mac mini. They had issues where they would stop working after sleep, screen saver activation, or would start doing double key strokes, and other glitches. Honestly, if it's not an Apple keyboard or specifically made for the Mac, I've always had the keyboard develop issues at some point. I strongly suggest getting a proper Apple or made for Mac keyboard. It has solved all of my keyboard issues.

  • Safari quits automatically after certain amount of idle time.

    I am having a problem with my Safari quiting after a certain amount of system idle time. It could be as little as 5 minutes. I honestly don't know as I really haven't tried to figure out the exact time. Though I've been away as little as 15 minutes to come back and find that Safari as quit.
    I do close the last window of Safari, but I've been doing that for years. I've only noticed that it's quitting by the fact that the little "light" at the bottom of the icon is missing. And that it bounces 1 or 2 times when I click on it. As well as the fact that I am not getting notifications, like eBay.
    I have to admit that I was playing around with an Apple Script to have it quit Safari automatically after some system idle time. However, I can no longer find that Apple Script or the app. Heck, I can't even remember the name. However, I couldn't get the script correct as it never worked. I was doing this because my mother would leave a lot of windows/tabs open on her Mac and would use 50% plus of the CPU at times, even at "idle". I was doing this in Mt Lion, but once Mavericks came out. Her CPU usage has dropped down to less than 5%
    So my questions are... How can I find this Apple Script that I created nearly a year ago? Why all of sudden does it start to work, which is with in the last several days to a week? Could it be something else that's making it quit?
    The only thing that was a "huge" change was the addition of Garmin Express app to update my mother's GPS. (Wish that I did it on her Mac) However, this was installed last night.
    Oh, there was another thing. I've tried to use this Mac as a target boot disc to a pre-2008 MBP 17', non-unibody. And I also tried to use that same MBP as a target disc on this Mac. Used a firewire 800. This was done about a week ago.
    Thank you,
    KOT

    More important information: This only happens under an account that has the Parental Controls enabled. The main Admin account does not have this problem of Safari quitting out.

  • My song keeps playing the next one after a minute or so?

    So I was playing a bought song (can't remember to forget you " by Shakira and Rihanna. After a minute or so, it skipped to the next song. I thought it was just a mistake at first but then I kept trying to play it after a minute and it would just go to the next song but still have the title for "can't remember to forget you". I tried deleting the song from my iPhone and synced my iPhone 5 but nothing changed. The weirdest part it that it normally plays on my laptop. Help please. And yes I have the latest update 7.1.0

    Un-sync all your music to remove it from the device, then restart (hold down the home button along with the sleep/wake button until you see the apple, then let go). Now re-sync your music.

  • TS1441 why does my ipod keep showing the itunes thing after I restored it three time what should I do please help!

    I need help why does my ipod keep saying connect to itunes,I have already restored it 7 times what to do now.HELP ME!

    If the restores were successful, that is completed all steps without errors then:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .

  • In iWS 4-6, how can I cause a user to re-login after 30 minutes of idle time?

    We are using NSE 3.x as well as iWS 4, and 6 for several websites. They all use Directory services and SSL. I want to be able to force the user to re-login into the site after a specified amount of idle. Also, if possible, I would like the user to be able to log (him/her)self out at any point without closing the browser. How can this be done?
    Thanks in advance,
    scott

    Hello,
    You didn't mention on which platform you are running the iplanet web server. I assume that you are running iWS on (UNIX/LINUX) platform.
    you need to set the CGIStubIdleTimeout directive for the required time to logoff the user idle for seconds, which causes the server to kill any CGIStub processes that have
    been idle for the number of seconds set by this directive. Once the number of
    processes is at MinCGIStubs it does not kill any more processes. The default is 45.
    CGIExpirationTimeout limits the maximum time in seconds that CGI processes
    can run.
    Thanks
    Selva

  • CLOSED: MAPVIEWER LONG PREPARATION TIME AFTER LONG IDLE TIME

    SR # 6896831.994
    Customer: NEDGRAPHICS BV
    Mapviewer Release: 9.0.4
    This issue was posted to the Field Service Forum. They responded with
    For Map, we do create the datasource and related maps, themes, styles to be used for Map. The exeuction part is done by Mapviewer and we don't have much control on the mapviewer code on performance tuning point of view.
    Please post this question in mapviewer forum
    Issue:
    After MapViewer being idle for some time (+/- 60 minutes) it takes a long time to generate the first map image --> 5 minutes.
    In the MapViewer logfile with log-level=finest, I see that there is a very long preparation time.
    After producing the first map image the next (same!) image is produced very fast.
    What could be the reason?
    What does MapViewer do during "preparation"?
    Customer statement:
    I am a very experienced Oracle specialist and a very experienced MapViewer developer.
    Could you please pass on my request to the MapViewer developers?
    I have to know what is going on during preparation time.
    Is there a possibility to get more detailed logging of the preparation time?
    SEE log file at:
    http://workbench.oraclecorp.com/cgi-bin/tools/its_reltar?tar=6896831.994
    FILE: mapviewer_37.log
    Additional customer info.
    UPDATE from customer
    ================
    The first time after long idle time it takes between 100 and 300 seconds.
    After that it takes less than 2 seconds.
    Can it be a dabase connection issue?
    Will it make a difference if I use a database connection via data-sources.xml
    instead of a direct data-source in mapviewerConfig.xml?
    This is what I mean :
    Method 1:
    <map_data_source name="NBG"
    jdbc_host="plutonium"
    jdbc_sid="ods"
    jdbc_port="1521"
    jdbc_user="nbgex"
    jdbc_password="ELvaJ7axzKQl0aKtjikuKT7JUFTjukU3"
    jdbc_mode="thin"
    number_of_mappers="3"
    />
    Method 2:
    <map_data_source name="NBG"
    container_ds="jdbc/NBG"
    number_of_mappers="3"
    />
    data-sources.xml:
    <data-source
    class="oracle.jdbc.pool.OracleDataSource"
    name="NBG"
    location="jdbc/OracleCache"
    ejb-location="jdbc/NBG"
    xa-location="jdbc/xa/OracleXADS"
    connection-driver="oracle.jdbc.driver.OracleDriver"
    username="nbgex"
    password="nbgex
    url="jdbc:oracle:thin:@plutonium:1521:ods"
    inactivity-timeout="30">
    <property name="connectionCacheName" value="ICC"/>
    <property name="connectionCachingEnabled" value="true"/>
    <property name="fastConnectionFailoverEnabled" value="true"/>
    </data-source>
    Thanks
    Message was edited by:
    user639281

    RESPONSE from customer
    ====================
    The database is restarted once a day in the morning. That could explain the problems in the morning. But there are also problems during day time after some hours of idle time when the database in not restarted.
    After testing we noticed that we don't have the problem if we use database connection through OC4J (data-sources.xml).
    If we use that method every database connection is cleaned up if it is not used for 15 seconds or so.
    If we use the other method (database connection in mapviewerconfig.xml) then the database connection is open for a long time and then we have the problem with the long preparation time.
    This problem only occurs in a DMZ environment. MapViewer is installed on a DMZ server and connects through the firewall with a intranet database.
    Is it possible that the firewall software prevents communication of an open database connection after a long period of idle time?
    Thanls.

  • Is it possible to end a program with frontend after idle time?

    Hi guru's,
    Our users are using TMW (trx PTMW) on a regular basis for entering time data.  It would be real nice to encourage them to close their TMW screens when they have done.
    It would be real nice if the TMW gui (or any other program they leave idle) would get cancelled after X minutes of idle time.  Any pending non saved changes may get lost.
    I' ve looked at the rdisp/gui_auto_logout parameter.  But this cancels the whole session and so they need to log on again.  We'd just like it if they return to their easy access startmenu.
    Any suggestions how to do this? (a system parameter? repair of TMW? job that ends idle gui's?)  I'll reward any usefull suggestion
    Kr,
    Jonathan

    If you want your LabVIEW program from Windows to run on Linux, you need to compile it first with a LabVIEW for Linux version. Be aware that path management is slightly different under Linux. So your Windows application won't run under Linux if you don't prepare for it.
    If you want a LabVIEW / Windows application to interface with LabVIEW / Linux, you can do this with TCP/IP functions, or perhaps even with global variables (not sure if they work under Linux).
    Can't help you with the second question(s). I'd be worried about getting any camera working under Linux and LabVIEW, but I'm not sure if this is a valid concern.
    Regards,
    Wiebe.

  • Jdbc connection lost after idle time

    Dear users,
    i'm using the oracle 10g database. Now i found out that several programs (SQuirreL, QuantumDB,...) which use the ojdbc14 driver are losing connection to the database after about one hour idle time, but it is not set in db configuration to disconnect (eg parameter idle_time is not set). What could be the cause of this? Is this a error of jdbc (the java exception is something like socket lost) or is it a missconfiguration of the db?
    Thx for help.

    With a simple java program that makes a select on a database table over jdbc after one Hour idle_time this exception happens: (the program is started local on the database server so no firewall or router is between)
    java.sql.SQLException: No more data to read from socket
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:208)
    at oracle.jdbc.driver.T4CMAREngine.unmarshalUB1(T4CMAREngine.java:1118)
    at oracle.jdbc.driver.T4CMAREngine.unmarshalSB1(T4CMAREngine.java:1070)
    at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:478)
    at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:207)
    at oracle.jdbc.driver.T4CStatement.executeForDescribe(T4CStatement.java:790)
    at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1039)
    at oracle.jdbc.driver.T4CStatement.executeMaybeDescribe(T4CStatement.java:830)
    at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1132)
    at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1272)
    at test$1.run(test.java:24)
    at test.main(test.java:55)

  • How can I edit imported audio track? After selecting and deleting region and joining remaining parts, it keeps playing the track with the deleted part! What am I doing wrong?

    How can I edit imported audio track? After selecting and deleting region, and joining remaining parts, it keeps playing the track with the deleted region!
    What am I doing wrong?

    After selecting and deleting region, and joining remaining parts, it keeps playing the track with the deleted region!
    What am I doing wrong?
    How exactly are you doing this?
    When I cut out a part of an audio region, then drag the remaining parts together, so they are touching, the track will skip the cut out section when playing the file.  Also, if I select the remaining parts of the region and use the command "Edit > join regions". This will create a new audio file with the cut out part deleted.
    You should see this prompt, when you are joining the regions:

  • After I updated my iTunes to 7.7, my laptop keeps playing some music

    I completely have no idea what's going on with my laptop. I was so excited to update my iTunes to 7.7 and iPhone to 2.0. But after that, something weired happens. My laptop keeps playing some unknown music at regular intervals automatically. This never happened to my laptop before so I thought it may be a conflict between Windows XP SP2 and the new version of software of iTune and iPhone. Anyone gets any idea how to fix this? It is just so annoying.

    hmm, windows has a lot of built in timers for things. So do other programs.
    Have you looked in Task Manager at the process tab, sorting by the CPU column? That might give a clue what's causing it, if you can catch some program using CPU time right when the music starts.
    I honestly don't think it's itunes, or there would be oodles of posts about that problem.
    I agree, it sounds really annoying!

  • HTML5 videos freeze after loaded, audio keeps playing

    This started happening some months ago in my old laptop and it also occurs now in the new one. A lot of times, when I play an HTML5 video (not just in YouTube, it also happens in Streamcloud for example), after it's fully loaded and I start playing it, it will stop (on YouTube the "loading" animation appears), and the audio will keep playing. The only thing I can do is mute it and reload the page. Whenever it happens, it usually happens again after a while, and it's really frustrating to have to reload a few times after it's loaded to be able to watch a 1 hour video.
    My laptop has two video cards, an Intel HD integrated one and a dedicated NVIDIA GeForce. It doesn't matter which one I use or if I turn hardware acceleration on or off, the issue persists.
    What can I do?

    Check that all of your software is up to date.
    Also, post the web address where you are having problems.

Maybe you are looking for