New K8N Neo4 Platinum build. Help, Nforce4 driver question?

I am building a new K8N Neo4 Platinum system (see my sig). I wanted to get the latest Nforce4 drivers, before installing XP. I noticed on the Nvidia website a 5.10 Unified Driver download and a 6.66 AMD download. Which should I use? It looks like the versions in the 5.10 Unified Driver are actually older than what is in the Nforce4 drivers, from the MSI site. If I use the 6.66 AMD drivers, should I make a SATA Raid Driver floppy, from them, to use during the XP install? Any advice is appreciated.

just do it from a floppy, LiveUpdate is crap
and yes you HAVE to F6 these drivers on Windows install if you plan on using SATA or you cannot boot from SATA
unfied drivers are NOT FOR NFORCE 4. You MUST use the NF4-specific 6.66 (or earlier)
Unified Drivers are specific only to nForce 1/2/3. AMD and Intel each have specific and unique driver sets for nForce4.
download 6.66, extract and explore the folder
go to IDE->Win2K->SATARAID and copy everything in this folder to a floppy
make two floppies just to be safe
you cannot use CD, you MUST use floppy because Windows will look in a: only
as soon as Windows install starts you will see a screen that says "Press F6 to install third party SCSI or RAID driver"... hit F6 and insert floppy and after a few minutes, you will get a screen that says"
"Press S to install other drivers..."
press S
next screen comes up, first select and install "nVidida Raid class driver (required)" -->hit enter
back to "Press S to install other drivers..." screen
press S again
screen wil come up again, this time choose and install ""nVidia nforce storage controller(required)"
one more time back to "press S to instal other drivers...", this time just hit ENTER
now you're good to go

Similar Messages

New K8N NEO4 Platinum build. BIOS recommendations?

I am building a new NEO4 Platinum box. The MB currently has the version 1.1 BIOS. I thought I might flash a newer BIOS before starting my OS install. Any recommendations on the most stable/functional BIOS version as a starting point? I see 1.5 is officialyl out, but have run across a 1.71 Beta.

That's great
As you have a Winnie there's no urgent need to update your bios. it's entirely up to you.

Slow Boot problem with New K8N Neo4 Platinum HELP

Hello,
I just set up my new rig, the system specs are..
amd64 3500+
K8N Neo4 Platinum PCI-E (non SLI)
2x80gb SATA (insockets 5 and 6) Silicon
2x512 ram generic
BFG 6800 Ultra OC
antec 550 truepower
The entire install went well.. It zipped through windows98... But when it tired to Boot windows98.. it went really really slow.. The animation bar at the bottom was chugging.. like lagging.. and took well over 10 minutes to fully load..
I check RAM was not it.. re-connected.. was not it.. new SATA cables.. no idea any help would do.. getting impatient and tired =O must get it up tonight!

Don't know if you or many people have seen this it's appeared over the last few days K8N Neo4 Platinum - NOTE: NVIDIA nForce 3/4 Series board DO NOT support Windows® 98/ME
There are people running 98 but my own understanding was that 98 could only use a sata drive as a data drive & could not be installed on a sata drive. Where have you installed it ???
see Win 98SE IDE problem.... Has anyone worked it out yet?
luck

New K8N NEO4 Platinum (non SLi) wont leave boot screen???

I just went out and purchased:
AMD Athlon 3000+
K8N NEO4 Platinum
Some standard case with a 450w power suply
On the +12v it says I have 18a
And Im using some things from my old PC:
(PCI) ATI Radeon 9200se (CrapTastic!)
Maxtor 40Gig (not Sata)
1x Samsung PC2700 DDR 512mb RAM
This is my first PC build and I ran into a couple of problems:
I have tried 3 different PS/2 keyboards(2 older and 1 newer) and none of them work. It shows the Platinum screen and then goes to a different screen that says "Keyboard error or not plugged in"
So I try my USB keyboard that I got about a year ago and the lights flash on the kb when I first start up but.....once I get to the Platinum screen the keyboard becomes unresponsive and I cant move off the Platinum Screen into BIOS or anything.
PLEASE HELP!

Well I went out and purchased a USB to PS/2 adapter and plugged it in with the USB keyboard that would light up but still not work and......................... STILL DID NOT WORK!
Im going on 2 weeks now with no Counter-Strike:Source and im goin nuts
Quote from: ck5134 on 07-September-05, 03:12:50
Grimster i agree totaly with jeanguy, you need around 25-30amps min on these boards, so try a mates psu.
Do I really need more than 18a with my system? How much money (ballpark) in US dollars do you think a adequate PSU for my rig would cost???
I am really thinking of just takeing it back and getting it replaced with the same mobo and see if that works.

K8N Neo4 Platinum not detecting hard drive

Hi,
what may cause a K8N Neo4 Platinum to not detect an IDE hard drive? no matter what i try the mobo never sees the hard drive.

welcome to the forum
1) What Hard drive - size & make
2) How connected - By itself as Master or slave.
3) What other ide devices.
it's a lot easier when u post some specs & we can quit the guessing games.

K8N Neo4 Platinum (MS-7125) Mic Jack question

I have a microphone i would like to use with my K8N Neo4 Platinum (MS-7125) and I was just wondering if the mic jack was powered or not because the microphone will not work.

hey, i tired that before did'nt work but now it did. But there still is a problem with the mic, the recorded volume is way too low, even with mic boost on.

Best Drivers for new K8N Neo4 Platinum Ultra 7125-010

Looking for just a little clarification on which drivers to load for this board. It is on the way with my CPU and should be here tomorrow. In reading through some of the posts, it seems to be a good idea to load the most recent drivers right from the start and not even use the CD that comes with the MSI board. Below is a list of the Drivers which I "think" are needed.
Graphics Video Driver; 78.01
Nforce AMD Driver; 6.66
Audio Driver; 4.62
In doing some further reading, it seems I may need the following also but am not sure??
Windows XP Unified Driver; 5.10
Which includes the following:
Audio; 4.42
Audio Utilities: 4.44
Ethernet; 4.42
Gart; 4.36
Memory Controller; 3.38
SMBus; 4.04
Installer;4.46
IDE NVIDIA; 4.46
My plan is to setup the build with 1 WD 37.6 Sata drive as the boot drive and only the drive to start with. As for my Internet connection, I am going to use my USB Gigafast Wireless to connect to my D-Link DL-524 wireless router. I am going to Disable all of the onboard LAN features. Part of my confusion at this time is, do I need all of the Windows XP Unified Driver package??? Thanks in advance for any help in clearing up my confusion. Also, is there a specific order in which these should be installed??
Regards; Pop's

No problem Pop,besides,I'm 42 now and still love to build on my computer
As for the link,you need the "AMD Athlon™ 64 Processor Driver for Windows XP and Windows Server 2003 Version (exe) 1.2.2.2"
or the one just above it "AMD Athlon™ 64 Processor Driver for Windows XP x64 Edition and Windows Server 2003 x64 Editions Version (exe) 1.2.2.1"
It will uninstall the current driver that was installed with the mainboard driver cd,and should install the newer afterwards,you can check in hardware device manager if the driver version is the newer for cpu after reboot.
Haha,yes,I had the same feelings before I build this system,reading all msi forums regarding mainboards.
And all I read was problems after problems.But I have another system based on the KT3ultra,which I build 3 years ago,and I'm still pleased with this system so I decided to stay with MSI for now.Also I noticed the problems were/are the same on the Asus platform,seems common on nforce4 mainboards.
As for building,just take your time,I had a slight incident with placing the heatsink+fan on the cpu socket,apparently in the corners of the cpu bracket is a small ledge(Énglish is not my nature language so don't know if I use the correct word) ,I couldn't get the retention lever in place,needed a lot of pressure and I became scared of damaging things.
So I waited a few seconds and tried again,suddenly with a loud click,the retention lever fell in place,the heatsink was hindered by this ledge in one of the corners from the bracket.So you have to place the heatsink correct and don't overuse the pressure you need for the retention lever.Slowly increase it,and all will go well.
Also I noticed the pcie graphics card fell right over the retention clip that holds it in place right besides the northbridge fan(well,actually on the left side from the fan),so installed once,it's very hard to get your finger behind to replace the card for example,or to clean it out from dust.But I used a small tool to get behind and press the clip for card removal(a bended metal tool,so I need to be carefull using this)
As for sata drives,I started with an ide to be on the safe side,but I do know you need the driver floppy disks for using the sata drive.
Can't help you any further with that for now,when I buy sata2 drives no doubt I also will need to check if I need a bios update etc.But that's with a smooth system already running,so I can take my time and redo any steps I made if things fail.
That's why you need to do the correct order of installing software,it's much easier then to fix problems that may arise.
Well,goodluck and don't be afraid,just take your time.

K8n neo4 platinum sees my sata drive as ide

I have a western digital 80gb sata drive. I connected it to sata3 on my motherboard but bios says it's fifth ide primary. Is that normal? Because in some other board's bioses i saw it's shown as sata. I have bios v1.1 by the way.
And also in windows, there's an icon same as the icon which appears when a usb device is connected to the computer. When I right click, I see my hdd on the safely removable devices list. I'm using windows server 2003 enterprise edition and yes I have installed the sata driver by pressing f6 during the windows setup. Does this icon appears in everyone?

you will get the icon with sata drives as in theory they are hot pluggable
of course in practise if its your c drive you cannot touch it
but a server with raid 5 or 10 you can swap out drives on the fly

BSOD's on my x64 K8N Neo4 Platinum based PC, Any ideas what's wrong? Help!

Over the past few month I've been getting BSOD's. There is no real pattern to their occurence and it's not something which is constantly happening (It happened around 5 times in the past 2 months), but I've really grown to hate them. You see, after getting one what has happened in the past is that when I go to restart my pc after getting a BSOD, I find I need to re-install my whole OS! What happens is that after booting (which oddly enough doesn't work well after a BSOD, It freezes on the boot screen and I need to restart several times), a black screen appears telling me that certain files in the C:Windows\ direcotory are corrupt or missing.
So the real problem is that the BSOD's cause me to re-install my whole OS. One will happen, then it will be ok, I turn the system on, log into windows, then it might happen again, after which I'll need to re-install. The files that go missing are always different too, and when I run scan-disk (after plugging in my main drive into another computer) it finds corrupt files and deletes them.
At first I thought it was Azureus (p2p client) which was causing the problems because it seemed to happen when I was runing that. I stopped using it, and the BSOD's still occured...sometimes randomly when browsing...etc. I figured that since files got deleted and corrpupted, it must be a problem withthe Hard Drive....So I bought a new one, and I've still had the BSOD error (although files haven't been deleted yet).
So yeah, I really need to solve this problem as it is taking away from my productivity and causing me to re-install far too often. I will post the BSOD info as well as my system info below (and a screen shot):
Quote
MACHINE_CHECK_EXCEPTION
*** STOP: 0x0000009c (0x0000000000000004,0xFFFFF80000113BC0, 0x00000000B2000000, 0x0000000000070F0F)
I looked that up on the net, and it seems the first part seems to indicate, or at least COULD indicate overheating. I checked CPU and System temps and they seem acceptable.
I am running Windows XP x64 Edition with the following hardware (please note that all of the hardware drivers I'm using are written for x64, MSI is so good:)). I have had this PC before it started having these problems, it could be related to using x64 I guess, but the error doesn't show that does it?
Quote
AMD Athlon 64 3200+ 2.0 GHz Socket 939 (Venice Core) w/ stock heatsink/fan
MSI K8N Neo4 Platinum S-939 nForce4 Ultra
OCZ PC-3200 DDR400 Premier Series 1GB (2x512MB) Dual Channel Kit CAS 2.5
Ati Radeon x800xl 256MB gddr3, PCI-E
LG 17" L1720B LCD monitor 16ms, 1280x1024
Western Digital Caviar 120GB SATA
Western Digital Caviar SATA II (WD1600JS) 160GB 7200RPM 8MB Buffer
Western Digital Caviar SATA II (WD2500KS) 250GB 7200RPM 16MB Buffer
Pioneer DVR-109 DVD-RW
Pioneer DVR-110D DVD-RW
Antec Sonata II Mid tower ATX black power supply 450 Watt ( ATX12V 2.01 )
Creative I-Trigue 2.1 L3450 speakers
Sony 1.44MB Floppy Disk Drive
Microsoft multimedia keyboard and Microsoft optical mouse (PS/2)
My OS and drivers are fully updated. As for my BIOS I've been running the version I'm using now forquite some time and I believe it is version 1.5. Also in another bad turn of events, my northbridge fan seems to be on its way out of this world (this just happned so I don't think its related to the BSOD). I haven't been able to find a replacement, and since its not spinning very fast, and sometimes stops...It's causing the heatsink to get quite hot. I need to get a new one, and I can't find them anywhere...I wonder if thats covered under warranty... I looked into getting a different heatsink, but my Graphics card is so colse to this heatsink, that theres no room for a bigger one at all.
Do you think this problem is motherboard related, I cannot understand what the technical info the BSOD gives me means, can anybody understand it? I don't think its my HD's, or Ram, or CPU...could it be a motherboard problem? And if so, its under 1 year old, can I get an RMA?
Thanks for the help in advance.

At one time I had a weak 450w psu that had only 18a on the 12v rail. When I overclocked my cpu and gpu, I was getting bsod's every once in a while and couldnt figure it out until I read a similar post like yours on this forum. I decided to upgrade my psu and havent had that problem since.
Power supplies can be deceiving. I now have a 480w psu but its has 30a on the 12v rail. So what we need to know is the ratings of your psu (see my sig) just to see if your psu is the culprit. Just my 2 cents.

K8N Neo4 Platinum SLI Sound Problem

I've recently build a system using the new K8N Neo4 Platinum SLI nForce4 board, which has the Creative SoundBlaster Live! 24bit onboard. The problem being the volume of the sound output (analogue) is extremely low. All volume controls in Windows are all set to full volume, but the sound output is still very very low. I consider myself pretty good with computers but with this problem I'm stumpted. Anybody else had this problem? Any insite would be very appricated.
Various info:
With my old SoundBlaster Live! Value the sound is fine
System Specs:
K8N Neo4 Platinum SLI
Athlon64 3500 Winchester
1gb PC3200 (Crucial ValueSelect RAM)
nVidia GeForce 6800 256mb
WindowsXP Professional w/ SP2
Any help will be appreciated

Ive been wanting to set up a new system based of this same motherboard, but all the power supplies Ive found so far have either been brands Im not familiar enough with or I havent been able to find a definitive answer on if the power supply supports that -5V pin(usually both, unfortunately). Can anyone point me in the right direction for a PSU under US$100? Any suggestions of power supplies anyone has had success with will also be greatly appreciated.
Ive spent about the past three days searching and have finally reached my wits end.
Second edit:
I double checked the diamond forum link (it gave a link not found page the first time), I did get to see what was posted there, but since most online retailers and manufacturer websites dont give the best view of the main connector, thats not alot of help. The only websites Im comfortable ordering from also do not evne carry the suggested power supplies, or any other unit by those manufacturer.
FINAL Edit (I promise...kinda):
I double checked on NewEgg (and then double checked FrozenCPU.com), and I found one from OCZ that doesnt totally blow my goal of USD100 or less out of the water. Lists a -5v supply, and is 24 pin for the motherboard:
http://www.newegg.com/app/ViewProductDesc.asp?description=17-104-155&depa=1
Same thing for 129.99 on FCPU, which is where Ill be ordering the power supply from.
I dont have any real need for the onboard adjustment dials of the more expensive series, and I really like the modular PSU design, not to mention the blue color scheme will work well in my blue-illuminated case.
Now, are there any other hurdles I need to be aware of?

Strange power-on (issue?) with K8N Neo4 Platinum

Hi all, i have a new K8N Neo4 Platinum, non-sli.
My rig:
A643000+ winch, no overclock
2x512MB Corsair XMS DDR400MHz
2x200GB Seagate mirroring
Plextor PX-708A
BenQ DVD Burner
AN OLD Matrox Mystique 4MB PCI (new pci-e gfx card later...)
A powerfull enermax coolergiant 600W ATX 2.0 power supply
Latest official nforce4 drivers and bios
It seems to be ok: installed winXP pro sp2 and updates, installed two Seagate in raid-mirroring with the nforce4 controller, installed some progs and utils, firewall is ok, prime95 go without problems for 1 our (more tests later), cpu temp is 34°C and sys temp is 30°C.
CoreCenter Say:
Vcore -> 1.41V
3.3V -> 3.39V
+5V -> 5.13V
+12V -> 12.26V
memory volt -> 2.60V
FSB -> 200MHz
PCI-E -> 100MHz
cpu volt -> By-VID
Apparently no weird things...
When i switch-on the Pc, for some seconds( ̃10 secs) it don't want to boot, optical drives blink repeatly and the screen is blank, like a bad overclock... But the machine isn't overclocked, and the bios is ok, i think. After 10 secs, finally it go and run flawlessly, post and other things are ok. When i reboot in win, the 10secs-issue repeat itself. So this strange thing at the post is normal? Anyone with the same "problem"? For now the rig is ok when it logon in winXP...

Hi all my friends
@JER101 >>> Ehrr i mean post, sorry
I had unplugged the optical drives, but the problem persist. When plugged, they blink for some times and after blinking the machine go into post-phase and after it boot in the correct manner. I think the PCI card is the problem, like some of you said... I will buy one pci-e card (obviously), but i hope things are not dangerous for now
In the mean time, i have a new problem: emule+firewall=BSOD. I know, there are tons of post about this issue around, but the solution is unclear... Tried to disable DEP, patched WinXP SP2 with latest things from winupdate, but nothing work for me, emule and the firewall generate a crash&reboot. Tried with the Marvell LAN, too, without success.
Any suggestions? Usefull links? If i uninstall the "NVIDIA Forceware Network Access Manager" it will work without problem with a thirdy part firewall, like sysgate?
P.S.
What's the problem with nvidia drivers? C'mon nvidia, solve this damned issue!

Lan issues with the K8N NEO4 Platinum NF4U 939 Motherboard

New K8N NEO4 Platinum NF4U 939 Motherboard.
After three or four hours the connection started to get unstable. I am a high end gamer and any net slowdown I see and feel.
Using my "Ping Plotter" program i saw the issue. The first hop to my router was going from 0 to 47ms. On all of the other conputers on this network hop one stays at 0.
In looking at the over all ping to my game server I noted that when hop 0 went to 47 it messed up all of the other hops and made the connection to my game server unstable.
The odd thing is I bypassed the onboard nic's and installed a PCI nic and it did the same thing.
I got with MSI and they had ne updare the NVIDA drivers. This lowered the swing to 0-17. I removed the PCI lan and am now back with the onboard nic. I have replaced the DSL modem, cable and removed the dlink and the issue is still the same.
This is my first computer with XP and at this point I do not know if this is an XP issue or a driver issue.
In installing a pci nic some of the network control is still done on the motherboard so that does not rule out a motherboard/chipset driver issue.
I have set up a web site that shows screen shots of the ping plotter. Please take the time to look at them and tell me what you think.
http://webviper.com/LanIssues.htm
Thanks for your help.
Regards,
WebViper

Hello !!
Please give more information about your system specs.
But i would try the following:
Download the latest nforce and vga drivers from nvidia ( if you are using nv VGA card ? ). Google for "driver cleaner" and download it.
Restart system and press F8 to enter safe mode. Now uninstall all nvidia drivers(chipset & VGA), and run Driver Cleaner after it. Select the nvidia tabs and remove them....
Now reboot, when prompted to install new drivers cancel this process. And start nvidia chipset driver setup, install all drivers but do not install the IDE driver from nvidia, you will be prompted for this.In first attempt you should not install nvidia firewall. Restart and install VGA drivers. Now test again your network connection. I hope it helps....
Greetz

K8N Neo4 Platinum power on/off problem

Hi all.
I just got a K8N Neo4 Platinum, and have a problem with switching it on and off.
When I switch on the mains to the PC PS(before turning the PC on), the fans start turning, and I hear disks spinning up. The PC power LED is off, but the HD LED is on. There is no picture on the monitor.
If I then switch the PC on, it boots normal, power LED is on, and the HD LED is normal. The PC is working absolutely normal, with winXP.
But when I turn the PC off again, the fans remain on, power LED goes off, HD LED on. And I can't switch the PC on again, till I have toggled the mains supply.
I have tried measuring what comes on the power connector. It looks like there is still 12V when the PC is supposed to be switched off. Don't know if that is right.
There is also 5VSB and PWR OK, but I think they are supposed to be there.
I hope I have been able to explain the problem in understandable english.
Jens G

Quote from: fflex on 02-March-05, 19:21:07
That the comp turn itself on when the different front side connectors etc isnt in, i dont think that's a problem with ur PSU.
Same thing happend to me when i forgot to plug them in a couple of days ago. I got a Tagan 480W, and its flawless!
Have u ever considered unplugging everything, and doing it from the beginning? ......
I have tried from the beginning many times, but it's always failing.
BUT..... Today I got a new K8N Neo4 Platinum from a vendor next door to where I work, and it works perfectly
I had a suspicion that the motherboard was causing the fail, but couldn't be sure without trying a new one. Now the first one is going back to the shop where I bought it.
Thanks to all for all the suggestions you have come up with.
Jens G

Anyone get 2gb Memory to run at 1T in K8N Neo4 Platinum SLI MB?

I recently upgraded to 2 GB Geil memory in my new K8N Neo4 Platinum SLI system (not the system listed in my signature). I cannot get it to boot if I set Ram to 1T.
Has anyone been able to run 2GB at 1T in this MB?
Thanks.
fafner

Thanks all for your comments.
I have the Geil Value 2x1gb dual channel kit. It is rated at 3, 4, 4, 8. I can get it to run fine at 3,3,3,8 at 2T. I cannot get it to boot at 1T with either the rated settings or the faster settings. It will boot at at 2.5, 3,3,8, but is not stable.
I can exchange this kit for a higher quality kit, but I don't want to do that unless someone else has had success with runing 2x1gb in this Neo 4 Platinum SLI board.
The memory I have runs at 1t in my K8Neo2 system as my does my Kingston Value RAM (2x512). It so happens that I have 2 Kingston value kits (total of 4x512), which I could try but everything I have read says it will run at 333mhz with four stix.
My experience has been that the K8N Neo2 Platinum is more accepting of value memory in general than the K8N Neo4 Plat/SLI. I have also read that getting any 2x1gb kit to run at 1T in the Neo4 Platium/Sli board is impossible or at least nearly so. That is why I am looking for soneone who has success (or no success) with 2x1gb sticks at 1T in the same mb as mine.
Net I want to get the best 2gb configuration possible but onle one that someone already has experience with (since I can only exhange the Geil kit once).

New build: MSI K8N Neo4 Platinum + maxtor 300gb = problem?

Got these 2 products included in a order:
MSI K8N Neo4 Platinum nForce4 Ultra (Socket 939)
Maxtor DiamondMax Plus 10 NCQ 300GB
While checking up on the MB on the MSI site, I noticed a version of the bios (1.2) that says 'support for 300gb maxtor drives'
That's the same HD one I have coming with my order >.<
If the MB I get hasn't got that version of the bios already installed will I have trouble installing the drive?!
I downloaded the bios and it says in the readme not to install it from a floppy disk, so I guess you need a system up and running to make that update in the 1st place. No Idea how to go about this, if the need arises.

Quote from: Supershanks on 19-May-05, 21:45:00
Hi drjugears,
Welcome to the forum.
Many people are runnimg ok anyway as dope says.
But it's not an issue you can update the bios via floppy b4 connecting the maxtor.
See Flashing the BIOS for Users using NON FAT file system This is a guide written by msi. Strictly speaking if you folow the instructions you aren't flashing from a floppy the actual update is done on a virtual drive in memory.
if you need a floppy boot disc see Why no floppy for bios flash?
luck with build
Thanks very much for the welcome and info.
Unfortunately I'll have to wait a while to see...I installed everything....but need some adapter for the 6pin connecter on the ATI card. The power supply came with some 8 pin one. So I need a 4 to 6 pin adapter. Doubt If I'll find one local, so will probably have to wait until monday now to try it out.

New K8N Neo4 Platinum build. Help, Nforce4 driver question?

Similar Messages

Maybe you are looking for