NEW k8n sli platinum / diamond bios (MS7100) 3.62 BETA

heres the newest BETA bios for the ms7100 i have it on my k8n sli platinum but should also work on k8n neo4 sli diomond.REMEBER THIS IS A BETA USE AT YOUR OWN RISK!!!!!!!
solves the 20 second cold start / reset button problem for me
modded version http://msi.designlab.info/attachment.php?attachmentid=2391&sid=c1b9a434a52cbfa38725792e29ee4322
unmodded version http://msi.designlab.info/attachment.php?attachmentid=2390&sid=c1b9a434a52cbfa38725792e29ee4322

Quote from: Satellite on 25-July-05, 23:49:23
Does it fix the "2.5 minutes before post starts" problem?
Oh that is a BIOS problem?? I've noticed mine has STARTED doing that since I loaded this BIOS in (I had the 3.30 previously). I thought one of my hard drives was going bad or something and wasn't getting detected properly. Once I disabled the IDE controller it booted up in no-time. I rebooted again, enabled it and it posted right away. Weird stuff...
**EDIT** I just found this link in another post. Going to try it out and see if it works.

Similar Messages

K8N SLI Platinum hidden bios features?

Does the K8N SLI Platinum have any hidden bios features? if so, how do I get access to them? (I have read how to do it on the other NEO boards, and have tried that, but it did nothing). The manual does not say anything about it. And all searches on this forum only turns up info about NEO/NEO2 boards.

Quote from: Stick on 19-December-05, 18:47:36
it all depends on the CPU that you have. what core is it?
Going to be running an Opteron 146. It has done 280x10 on my MSI Neo2 so i'm aiming for the same or more on my Sli Platinum.

K8N SLI Platinum + FX60 + Bios 370

hoping to upgrade from my fx53 to the FX60 and was wondering if anyone can see any problems with this setup as it stands
would i need a BIOS flash ??

hi there
yeah i was trying to use the liveupdate .... i have hit another problem now though i am trying to grab the BIOS from here ( http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=641&kind=1 ) and everylink is coming up as dead , i have tried to disable the firewall avg etc but the links arnt working for me
i will try and grab it somewhere else

Can K8N sli Platinum be upgraded for PCIE 2.1?

Hi. Quick question as per the subject. Can the K8N sli Platinum motherboard BIOS be updated to recognise a PCIE 2.1 MSI R5570 graphics card.
We did one BIOS update using the Live Update online thing but when we try and check to see if another newer update is now due the PC shuts down and says that we have got to undo an overclocking thing!!! The BIOS update was dated something like July 08 and I don't know if PCIE 2.1 was around then.
I now assuming that there isn't a BIOS update for this motherboard to allow PCIE 2.1. Bit worried that the BIOS update that we did has done something bad although everything other than checking for the updates again seems to be working? Just putting Windows 7 on and that seems to be going fine.
Do I send the graphics card back, or can I upgrade the motherboard and still use all or a lot of the rest of the existing items like the CPU and the memory, or will a new motherboard which accepts PCIE 2.1 pretty much force an upgrade to the whole lot? CPU = AMD Athlon 64 3500+ and memory = Corsair (TWINX1024-3200XLPT) 1024MB (2x512M Matched Pair). Things like wireless and disk drive etc shouldn't need changing would they?
Thanks

Quote from: Svet on 04-December-10, 21:26:07
No, the board is too old
Based on posts on this forum, i bought Radeon HD 4770, so not to get 5xxx series, i was eager to get. But nevertheless MSI K8N Diamond won't boot with 4770. Error code says it halts on "Testing VGA Bios".
And when searching for possible fixes i came upon AMD forum where people were complaining about the 5xxx series not working with nForce 4 chipset, but most of them got an easy fix - email the support of the mainboard company and recieve new BIOS - so all the Gigabyte users got their machines running by just sending 1 email and waiting for few hours.
I do hope MSI will respond and be as generous as the rivals, otherwise it will look bad for future buyers.

Very slow USB on K8N SLI Platinum & Windows XP SP2

Hi!
I.e. deleting a folder with small 6000 files (all together they have ~50MB) from USB device lasts according to Windows about 100 minutes.
I've got K8N SLI Platinum with BIOS version 3.70, Windows XP SP2 with all updates and some recent nVidia nForce driver (however I'm not sure which version exactly).
In "Device manager" it looks like the USB driver is from Microsoft from year 2001. Are there some new drivers or something that can help to increase USB performance?
Thanks in advance

Usb's as stick say can't be compared to drives attached to a ide controller.
But you can check to make sure it's running at 2.0 speed like this.
If you look in device manager - on the view on menu - select "view devices by connection" .
Then expand the tree down to USB Enhanced (EHCI) and see if the "disk" is attected to this controller.
If it is you running usb2.0.
Here you see Verbatim Stor'n Go Usb 2.0 thumbdrive attached to the Standard Enhanced EHCI Controller (Usb 2.0)
The other circle shows a bluetooth device runnings as usb 1.1 and attached to the Standard OHCD Controller (Usb 1.1)
An other thing that slows it down is that cache is disabled ("optimized for quick removal") .

Can't open BIOs Set-up, K8N SLI Platinum, after re-flash

I used the USB Bio flash tool from the forum to re-flash the BIOs on my K8N SLI Platinum board to the latest BIOS from the MSI site, specs below.
After the re-flash, which seemed to go okay, I cleared the CMOS (turned off and unplugged computer, pushed the clear cmos button for about a minute), and re-booted.
I get a checksum error, no floppy found. I don't have a floppy drive in any case. But then I am unable to enter the bios. Pushing delete at boot gets me a screen that's blank, save for a cursor in the upper left corner. I can't enter anything from there, ESC key doesn't do anything. So I have to reboot.
I can get to the POST screen and pressing F1 allows the system to start and get to Windows, which seems to run okay. System shows that the new BIOS is installed. I just can't get into it to re-set to default settings.
If I turn off the computer, I get the checksum error again and in Windows clock and date have to be reset. But if I just reboot I just have to go through the no floppy found, then push f1 to get back to windows which has retained settings.
I tried doing the flash procedure again and got same result. I haven't tried flashing back to the old BIOs yet. MSI's site only lists the most recent BIOs, my preference would be to try a different one, but not as old as the 2005 version that was on there.
Hopefully someone can tell me something obvious that I'm missing here.
Rick
Windows XP Professionnel
Version   5.1.2600 Service Pack 3 Nu 2600
Motherboard K8N SLI Platinum, with Nvidia nForce 4 SLI chipset
Model   MS-7100
Typ   X86-based PC
AMD 64 3500+ ~2211 Mhz
BIOS/Date   Phoenix Technologies, LTD V 3.12, 10/27/2008
Version SMBIOS   2.3
4,096.00 Mo RAM

Quote
I'd also like the RAM to run at at least 333, rather than the 200 something it runs at with this BIOS.
Check this with CPU-Z at "memory tab" ==> http://www.cpuid.com/cpuz.php
BIOS post screen info can be incorrect., or current older BIOS by 200MHz it may means 400DDR In all cases its cosmetics,
the way of showing real of effective freq. can be changed in future version.
Also with four sticks it should be shown as either 333 or 166, not 200 or 400
Best check with CPU-Z how they are running
Quote
It may now be possible to put something faster in there, but I don't know that for sure. But the 4000+ should improve performance a bit.
Such old CPU's can't be found easy in present days, also its not good investing to invest in old stuffs.
You want W7 and such, changing to the best CPU wont improve much the performance in overall..
Soon or later you have to change it, then this and eventually "newest" CPU which you gonna get will became useless.

MSI K8N SLI PLATINUM or DIAMOND ?

Hey,
I'v problem with choosing new mobo.
I'v MAXTOR DiamondMax 300Gb SATA hdd and i'm not sure
that both mobos will work with my hdd.
I know that MSI K8N SLI Platinum works with Serial ATA II interface and Diamond works with Serial ATA interface.
Does both mobos will works with my hdd or i must to choose: Platinum or Diamond ?

Hi aduh ,
FastEddie's - Which NF4 Motherboard Do I Have may help you.
This thread may also be of interest nForce4 (Neo4) & Maxtor DiamondMax 10 SATA II NCQ compatible?
luck

MOVED: K8N SLI Platinum - BIOS Update

This topic has been moved to AMD64 nVidia Based board.
K8N SLI Platinum - BIOS Update

Sorry, I'm dozzy... I've since discovered that it's a 219 Mhz problem, there's a sticky in the overclocking section on how to overcome it, and it doesn't apply to me anyway, 'cause I've got a Venice...

[Resolved] No boot with K8N sli Platinum & AMD 64 X2 3800+

Hye,
I've received these new stuff last night (everything is good until here) :
- Antec Sonata II 450W
- MB MSI K8N SLI Platinum
- Proc. AMD 64 X2 3800+
- GC Sapphire X800 XL 256Mo
I've assembled all and turned it on... No bip... but all the fans are turning... and the screen says "No signal" and becomes black ( and me )
Can someone help me? Please?
On the MSI site, I also found this :
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=641&kind=1
Maybe the proc. and the Motherboard are not compatible? Has someone already tried this combinaison (MB+Proc.)?
My Thanks in advance.

Quote from: darinn on 12-November-05, 03:22:08
I will ask the sellers if they can update the Mobo for me.
But with the last version of the bios, will the mobo accept the dual-core with this proc. AMD 64 X2 3800+?
And if it's not possible I'll change the mobo.
Thanks .................................. again.
Pretty much any SLI motherboard supports the X2 3800. MSI is just really pathetic sometimes. So, I had the Abit AN8 SLI before and their latest BIOS (17) supports all X2 CPUs. But Im sure most other brands support them too.

MSI K8N SLI Platinum vs 1.5TB Western Digital

Hi Everyone,
I have recently been having some issues with my K8N SLI platinum and hoping I could get some help on resolving the issue.
For the past 2 years i have been running the machine with multiple SATA drives (160GB{boot} and 300GB) and have now tried to add an additional 1.5TB WD and have encountered some problems. If i put my 1.5TB into a USB enclosure and then connect it to my machine it is recognized perfectly and I am able to write and read from the drive, However if i put it into my machine as a secondary HDD my computer fails to boot.
First when i put the drive in my computer no longer boots to windows. It gets to post and loads the drives (including the new drive) and then wont go any further. PC seems to stall and wont allow me to get to the BIOS.
I boot up the machine without the drive connected and go into the BIOS and then reconnect the drive. If i do a HDD Scan on SATA3 then the drive will be recognized (however capacity is only 136GB).
My first thoughts were that it was a bios related issue so I have updated the Bios to the latest (3.C according to LiveUpdate) and am still having the same issue. Im not really sure where to go from now.
Any help would be greatly appreciated.
Thanks for your time.
Tim

Hello! Please say what your system looks like. Include what PSU you are using.
Try a different cable.
Jumper the disk to SATA 1.
Try the disk in a different system.

MSI K8N SLI PLATINUM OC problem

Hi
This is my first topic.
MSI K8N SLI PLATINUM
Wincheaster 3200+ 90nm
Aspire 520watt 35amp
Point of view 6800ultra
2*512 crusial BallistiX pc4000
My problem is that the pc will not boot after 235 FSB. I have tried with 2*512 pc2700 memory with same result. I have tried diferent memory timing but it wont help, i have add more voltage to the memory and cpu but it wont work either. Im open for any idea.
I hoped to at least overclock the cpu to 2,6 ghz watercoold
Plz HELP

Quote from: filleCarpet on 25-April-05, 09:36:05
Maybe i need to add more electric power for my memorys. The spec says 2.80 volt on 250 mhz but i start to suspect that this is just an minimum requirment, maybe i need more than 3.0 v to operate the memorys on high performance(beyond 230 fsb), but the thing is that BIOS allows me only too add 2.85v maximum.
Im trying to find a newer version of BIOS version 3.1 if there is any....
Here: http://www.techpowerup.com/articles/other/111
v5.0 Beta 4 allows to give 3.10V to the memory but i don´t think it´s going to help you, you probably have the CBBID issue.

MSI K8N SLI PLATINUM & Geil PC3200 400MHz CAS 2-5-2-2

I'm thinking of buying a new pair of memory modules, particularly,
Geil Ultra X PC3200 400MHz CL2-2-2-5 DDR.
Has anyone tested them with MSI K8N SLI PLATINUM?
The specifications are:
"PC3200 400MHz CAS 2-5-2-2
GeIL Ultra-X TSOP 32x8 DDR Chips
184pin, Non-ECC, Un-buffered DDR DIMM
Platinum Copper Heatspreader
6 Layers Ultra Low Noises Shielded PCB with Gold 30u" Plating
Temperature thermometers
Retail package
2.55V-2.95V
Lifetime warranty"

I continued with the overclocking to see the limitations of the memory and not only.
I managed to run the modules at 466MHz with 2-2-2-5-1T at 2.85v which was the upper limit.
Unfortunately bios limitations didn't me allow to reach 500MHz as the memory chips could give.
Max voltage at 2.85v.
The ultra x series are out in the market with two chips: Samsung TCCD and Winbond BH-5.
For that I searched and learned that the Windbond BH-5 can't work at CL 3, which I set at system bios.
The system couldn't boot. So I suppose I'm having the coolest BH-5.
It also needs over 3v in order to reach the 500MHz frequency and the necessity of an air cooler above rams.
Maybe in the future with a more overclockable m/b like Stick proposed.

Any known problems: MSI K8N SLI Platinum + seagate 7200.9 sata2 hdd?

Hi all.
I planning to buy Seagate sataII 7200.9 250GB drive (model: ST3250824AS) very soon (finally they are in stock in my city), but first i want to know is there any incompatibility issues or other problems with such combination - MSI K8N SLI Platinum + seagate 7200.9 series hdd.
I don't have any experience with sata2 drives yet. Currently i'm using seagate 7200.7 120GB IDE hdd.
I don't plan use RAID or use that new 7200.9 drive in combination with current 7200.7 drive (will use current hdd in other pc).
Any tips/experience would be great.

Seagate SATA II 7200.9 250GB drive (model: ST3250824AS) has both 3 G/bps speed and NCQ (Native Command Queuing) most all MB’s with the nVidia Chipsets using the nForce4 chip will have problems. If they are not using RAID and you reduce the speed to 1.5 G/bps with a single drive you maybe able to get it to work. Personally, I know the MS-7125 and MS-7220 both will not run RAID with those to motherboards.
I have been battling with MSI and ASUS over this problem sense November and they have not come up with a fix. Problem involved BIOS and RAID Controller Driver for the chipset. Most MSI motherboards latest BIOS have fixed the BIOS half of the problem. There is an unreleased 32-bit driver for Windows, but nothing for Windows XP 64.
Roger

MOVED: MSI K8N SLI PLATINUM OC problem

This topic has been moved to Overclockers and Modding Corner
MSI K8N SLI PLATINUM OC problem

Quote from: filleCarpet on 25-April-05, 09:36:05
Maybe i need to add more electric power for my memorys. The spec says 2.80 volt on 250 mhz but i start to suspect that this is just an minimum requirment, maybe i need more than 3.0 v to operate the memorys on high performance(beyond 230 fsb), but the thing is that BIOS allows me only too add 2.85v maximum.
Im trying to find a newer version of BIOS version 3.1 if there is any....
Here: http://www.techpowerup.com/articles/other/111
v5.0 Beta 4 allows to give 3.10V to the memory but i don´t think it´s going to help you, you probably have the CBBID issue.

2nd K8N SLi Platinum motherboard just died

Hope somebody else has experienced this - now on my 3rd board. A bit about my system:
Msi K8N SLi Platinum motherboard
2 x Seagate Barracuda ST3200822AS 200Gb Hard disk
Antec PSU True Blue 480w
1 x AMD (Winchester) Athlon 64bit 3200+ CPU
OCZ Dual Channel Kit 2x512MB DDR400 Ram
128MB Gigabyte GV NX66T128VP Graphics Card
Running MCE 2005
I built my first system running Media Center 2005 a few months back. Very stable. Used to put it into S3 sleep mode each evening and wake up the next day. Never any problems. CPU temp ran about 47degC. Never did anything stressful on it, no games just watched tv with a tuner card and played mp3s.
One day it wouldn't wake up, wouldn't post, no beeps nothing. cpu fan spun briefly (2 secs) and died. I stripped it down to bare essentials (1 stick ram, cpu). Tested PSU - fine. Tried out of case, again no joy, so I RMAed. Put it down to a bad board.
So I installed the new board - it worked fine. Must have been a bad board. Great! It ran for another month and the same thing happened, it just would wake up one day! Now I'm worried, am I doing something wrong with these boards, are they getting too hot? How come they fail when they are switched off? Is it a bios thing? - I tried resetting the Cmos, no joy there.
Any way that I can update the bios when they are in this state?
Any ideas - cheers Richard

richardwilshire...here is a list of many potential non-compliant APM features you may want to look at, and note that these are carry-overs from Windows 2000, the foundation of WinXP:
Key APM Components and What They Do
APM BIOS: Placed in ROM or flash by the OEM. Does most of the real work of powering the system on and off. The operating system can call the BIOS, and it either works or it doesn't; its operation is opaque to the operating system. The APM BIOS must be turned on using the BIOS setup utility for APM to work. If the APM BIOS is unstable, it may be necessary to turn the APM BIOS off using the BIOS setup utility, in addition to turning off Windows 2000 APM support. The APM BIOS should be configured such that timeouts are either turned off or set for the longest period possible, so that the operating system can control timeouts instead of the APM BIOS.
Ntdetect.com: It detects whether the APM BIOS is present before booting the operating system, determines whether Windows 2000 can use it, and reports the results of detection in the registry.
NtLdr: Restarts APM upon resume from hibernate, if APM was active before hibernation.
Ntapm.sys: A Windows 2000 driver that hooks the system and the APM BIOS together. It includes certain system operations for dispatch to the APM BIOS, and it polls APM BIOS events and status. Note than when the APM BIOS presents an event (such as suspend or power off), Ntapm.sys catches this, and then issues an NtInitiatePowerAction call, which tells the operating system to respond appropriately. At the end, the Windows 2000 power manager calls into the HAL, which calls back into Ntapm.sys, which calls the APM BIOS. In this process, almost all operating system and driver power code is the same between APM and ACPI.
Hal.dll: Windows 2000 APM support works only with Halx86, which is the only HAL to have the hooks needed to call into Ntapm.sys. It's also the only HAL relevant to important APM machines in the market.
Apmbatt.sys: This emulates a battery unit so the system battery status code can work.
Power Applet: The Control Panel applet that allows the user to enable or disable APM support on a computer. This is the only supported way to turn operating system APM support on or off.
Biosinfo.inf: Windows 2000 file that lists machines on the Autoenable APM list and the Disable APM list, and also lists the BIOS detection sequences used to match them.
Key Elements in the Registry
Ntdetect Reporting. The data about APM that is discovered by Ntdetect.com is reported in the registry using a Multi-function adapter (MFA) entry in the system description of the hardware tree. To find this, look in HKEY_LOCAL_MACHINE\ hardware\ description\ system\ multifunctionadapter.
There will be a set of keys there named 0, 1, 2, 3, etc. Each of them will have value entries named Component Information, Configuration Data, Identifier, and so on. Find the key whose Identifier entry == "APM". The "Configuration Data" entry of that key will contain the data on APM found and reported by Ntdetect.com. If the key is absent, then APM was not found. The contents of this value entry are reported in sdk\inc\ntapmsdk.h.
Running Apmstat.exe -v will dump this structure, for machines where it's relevant. For machines where it's not relevant (multiprocessors, not x86, not halx86, ACPI is on, and so on), Apmstat.exe will report that.
Biosinfo vs. Machine-Specific Info. The results of machine-specific detection versus Biosinfo.inf are stored in HKEY_LOCAL_MACHINE\ System\ CurrentControlSet\ Control\ BIOSInfo\ APM. If the "Attributes" value is 1, the machine's APM BIOS is "known good" and the machine is on the Autoenable APM list. If the value 2, the machine's APM BIOS is "known bad" and the machine is on the Disable APM list. Otherwise, the machine is neutral.
Running apmstat will report whether the APM BIOS is known to be good, known to be bad, or is neutral.
HAL Reporting. If the HAL is Halx86.dll, the registry key HKEY_LOCAL_MACHINE\ System\ CurrentControlSet\ Control\ ApmLegalHal will have a value entry present with data of 1.
Running apmstat will report if this is not the case.
ACPI Reporting. If the machine is an ACPI machine, there will be a services entry for ACPI under (HKLM\System\currentcontrolset\services\ACPI) with value Start == 0. This is telling the system to load and run Acpi.sys at phase 0. If this is not present, the machine is not being run as an ACPI machine, even if, perhaps, it should be.
Running apmstat will report a machine as an ACPI machine if it sees Acpi.sys has Start == 0.
UI Elements
Power Applet APM Tab. The Control Panel includes a Power applet. If the APM is installed at all (enabled or disabled), there will be an APM tab in this applet. You can turn APM on and off by checking the box in this tab. This is the only recommended and supported way to do that. Turning APM on is an on-the-fly Plug and Play action; turning it off requires a reboot. If the tab is absent, it's an ACPI machine, an APM Disabled machine, or the machine simply doesn't have APM.
Standby on Shutdown Menu. If APM is turned on, there will be a Standby entry under the Shutdown option when the user presses CTRL+ALT+DEL. There may also be a Hibernate entry, which is a separate function. (Hibernate can work even if neither APM nor ACPI are present.) Standby under APM has the same use as under ACPI.
Battery Status Icon. If the battery display is turned on in the Control Panel Power applet, there will be a Battery Status icon on the system tray, which works about the same as for ACPI. Note that an APM machine always reports a single composite battery, regardless of how many are present or what the machine reports. (Windows 2000 uses the unified/composite number, because this is thought to be more reliable on a wide range of APM BIOSes, and is simpler.)
Power Button. On most APM machines, the power button, a sleep button, or the like, can suspend the machine (place on standby). Most require the power button to resume, though at least one will come back with a keyboard touch. Windows 2000 APM does not support custom power buttons.
Tools
Apmstat.exe: As of Windows 2000 RC1, Apmstat.exe is included in the support directory on the Windows 2000 product CD. Support personnel and expert users can run this utility to determine status.
BIOS Setup Utility. Essentially all APM machines will have some sort of machine setup/configuration screen, usually accessed at boot by pressing ESC, DEL, F1, F2, or F10. Support personnel and expert users may be able to improve system behavior by changing or disabling APM options.
Note: Be warned that some APM BIOSes will turn themselves off if all timers are disabled. In this case, it's best to set all timers to some long timeout value.
APM BIOS and Kernel Debugger. Some APM BIOSes will refuse to suspend if the kernel debugger is active on one of the system COM ports.
Event log. If an APM_SETPOWER call fails (that is, a standby/suspend fails at the APM BIOS interface), then Ntapm.sys will write a record into the system event log, with data reporting that this happened and whatever error code the APM BIOS returned. This information is sometimes useful if a machine is refusing to suspend because of activity on some port that isn't obvious to the user.
NOTES:
• APM support is not allowed on server products. This means that the APM tab will not appear and that there is no APM support in Windows 2000 Advanced Server or in Windows 2000 Datacenter.
• APM will not hook up the standby vector on machines that do not have batteries. This means that on machines that do not have batteries, standby will not appear as an option on the Shutdown list, and will not be available as an operation.
• Hibernate is independent of APM or ACPI; hibernate can be used on machines that do not have either APM or ACPI.
• To get the battery status icon, you must turn it on with the Power applet in the control panel.
• To get hibernate, you must turn it on with the Power applet in the control panel.
Suggestions for Problem Resolution
The following provides guidelines for support personnel or expert users who are troubleshooting APM support on a system running Windows 2000.
1.
Make sure the user has APM turned on, hibernate turned on, and the battery icon turned on.
2.
Make sure that APM BIOS screen blanking is turned off. This will often make the system seem to behave badly when problem is only that the screen is black. (Use a screen saver of BLANK to get the right effect.)
3.
Run Apmstat.exe. Its output will often make the issue obvious (trying to run APM on a multiple-processor machine, for example).
4.
If the machine is a desktop, it will rarely run APM well, but you can get 90 percent of the value by using hibernate, which does not require either APM or ACPI to work.
5. If Windows 2000 APM has been turned off, and the machine is still not stable, try turning off the APM BIOS itself in the machine's setup screen.
6.
Some machines will work better with Windows 2000 APM turned on, because this puts the operating system more in sync with the system's APM BIOS.

NEW k8n sli platinum / diamond bios (MS7100) 3.62 *BETA*

Similar Messages

Maybe you are looking for

NEW k8n sli platinum / diamond bios (MS7100) 3.62 BETA