New K8TNEO FIS2R bios V 1.3

MSI has released a new Bios V1.3 this one is offical release its available on MSI America site.
         BIOS history for MS-6702 (K8T800)
Model: MS-6702         PCB: 1.0      Author:   Rick
Old Version:A6702VMS.137   Code Base:7.0T     Build Date: 03/16/2004
New Version:A6702VMS.130             Build Time: 13:15:05
Description for FAE:
Source code:a6702vms130.zip
   Release V1.3 BIOS
Model: MS-6702         PCB: 1.0      Author:   Penny Huang
Old Version:A6702VMS.136   Code Base:7.0T     Build Date: 03/10/2004
New Version:A6702VMS.137             Build Time: 13:15:05
Description for FAE:
Source code:a6702vms137.zip
   1.MicroSoft Wireless MultiMedia Keyboard compatibility issue.
   FILE(s):oemmemry.asm (P03042004)
   3.Release A6702vms.137
Model: MS-6702         PCB: 1.0      Author:   Penny Huang
Old Version:A6702VMS.135   Code Base:7.0T     Build Date: 02/24/2004
New Version:A6702VMS.136             Build Time: 16:00:14
Description for FAE:
Source code:a6702vms136.zip
   1.Support K8 CPU CPUID:0FC0
   2.Don't disable onboard AC97 audio if plug in PCI add on Audio card.
   3.Release A6702vms.136
Model: MS-6702         PCB: 1.0      Author:   Penny Huang
Old Version:A6702VMS.134   Code Base:7.0T     Build Date: 02/24/2004
New Version:A6702VMS.135             Build Time: 11:45:40
Description for FAE:
Source code:a6702vms135.zip
   1.MicroSoft Wireless MultiMedia Keyboard compatibility issue.
   2.Release A6702vms.135
Model: MS-6702         PCB: 1.0      Author:   Penny Huang
Old Version:A6702VMS.133   Code Base:7.0T     Build Date: 02/09/2004
New Version:A6702VMS.134             Build Time: 11:04:39
Description for FAE:
Source code:a6702vms134.zip
   1.In BIOS Setup adjusting "CPU FSB" sometimes PgU/PgD key can't work properly .
   2.Release A6702vms.134
Model: MS-6702         PCB: 1.0      Author:   Penny Huang
Old Version:A6702VMS.132   Code Base:7.0T     Build Date: 02/06/2004
New Version:A6702VMS.133             Build Time: 11:17:50
Description for FAE:
Source code:a6702vms133.zip
   1."Cool'n'Quiet" enabled resuming from S3 issue.
   2.Release A6702vms.133
Model: MS-6702         PCB: 1.0      Author:   Penny Huang
Old Version:A6702VMS.131   Code Base:7.0T     Build Date: 02/05/2004
New Version:A6702VMS.132             Build Time: 10:52:54
Description for FAE:
Source code:a6702vms132.zip
   1.Support K8 CG version CPU "Cool'n'Quiet" Function.
   2.HCT PCI compliance test issue.
   2.Release A6702vms.132
Model: MS-6702         PCB: 1.0      Author:   Penny Huang
Old Version:A6702VMS.120   Code Base:7.0T     Build Date: 02/03/2004
New Version:A6702VMS.131             Build Time: 14:42:41
Description for FAE:
Source code:a6702vms131.zip
   1.Add Cool'n'Quiet support in W2k/WinME.
   2.Release A6702vms.131

not really shocking innit
Had hoped for some more (useful) things

Similar Messages

Bye-bye Neo2-FIS2R BIOS v1.3!!!!

I notice the 865PE Neo2-FIS2R BIOS v1.3 has been taken off the US web site but not the Tiawan site (.tw). Anyone know why?? My guess it's either the legal battle with Intel over enabling PAT on the 865PE or they finally got it that this version of the BIOS is buggy as all get out.
Either way, I wish they would tell us. It would be especially nice if they gave us a clear path through Live Update to flash back the BIOS to an earlier version and get away from the instabilities of v1.3. (Hint)
Interesting stuff.
Lanio

Also, the US site has only version 1.4 of the 875P Neo BIOS while the Taiwan site has had version 1.6 for over a month now.
In http://www.msi.com.tw/program/e_service/forum/index.php?threadid=25639&boardid=10, a user reported that Live Update found a new version of bios (vs current Rev 1.4) , so he downloaded and ran it but it asked him to flash the Bios in D.O.S. mode with a floppy - it didn't do it "Live"
I suspect various DOT bugs prevent them from continuing the release so as to minimize RMA claims
I hope they have a nice surprise in terms of a QUALITY BIOS soon, but from the previews reported (e.g. 1.74) it seems unlikely.

What's new in the BIOS Update v2.00 for Satellite L505-144

What's new in the BIOS Update v2.00 for Satellite l505-144
Thanks

Hi mate
As far as I know Toshiba European driver page does not provide any details what has been changed in the BIOS.
But I found some details on Toshiba US page.
It seems that Fn+N+1/2/3/4 debug function has been removed in BIOS 2.0 to avoid keyboard abnormal behavior.
Greets

P67A-GD55 (B3) new 1.15 BIOS ERROR

Hi
I am owner of MSI P67A-GD55 (B3) motherboard. My system configuration is:
Intel Core i5-2500K (not overclocked, turbo mode is off) (water cooled)
Gigabyte GV-R695OC-1GD 1.0 graphics card
4 x 4 GB Corsair Memory (Part Number: CMZ8GX3M2A1600C9)
Corsair 90GB SDD Force III HDD + 1TB Samsung HDD
Sound blaster X-Fi gamer
I was using latest 1.14 (1.E0) BIOS version. I have Microsoft Sidewinder mouse and sometimes I had problems with my mouse. Yesterday I saw that you released new version of BIOS 1.15 which improves compatibility with gaming mouse. Without wasting time – I’ve download new 1.15 BIOS version – copy it to my booted Pen Drive. After restart system, I’ve booted form USB drive and uploaded new version of BIOS. Everything was fine till restart. System turned on for about 1,5 second, after that computer turned off. It happened every time. I’ve tried to clear CMOS by clicking on the „clear CMOS Button” on Back Panel. But it didn’t help. My computer turned on for 1,4 s and turned off. I’ve tried to “Clear CMOS Jumper” with JBAT1 jumper. But it also didn’t help. I was really pissed off. I have been uploaded BIOS for long time and I never had problems like this. I thought that I would have to return motherboard to my store. But I tried something else. I’ve put out one of my memory module (form DIMM4), suddenly my computer turned off. So I’ve enter into BIOS and set everything to default. Everything was fine. I’ve restart system, booted up. After that I’ve turned off and put in my memory module and …………. my system turned on for 1,5 s after that turned off. I was really pissed. I’ve tried with others memory slots. DIMM1, 2, 3 – and it worked OK – but with DIMM4 for was error. So I’ve download 1.E (1.14) BIOS version and upload it. Now everything is working fine (with 4 memory modules loaded) but I have still problems with my mouse. There is some problem with this 1.15 BIOS version with 4 modules loaded – or just with Corsair memory. Does anybody had the same problem?
P.S. Sorry for my English

Quote from: przemciupol on 20-November-11, 05:55:02
Hi
I am owner of MSI P67A-GD55 (B3) motherboard. My system configuration is:
Intel Core i5-2500K (not overclocked, turbo mode is off) (water cooled)
Gigabyte GV-R695OC-1GD 1.0 graphics card
4 x 4 GB Corsair Memory (Part Number: CMZ8GX3M2A1600C9)
Corsair 90GB SDD Force III HDD + 1TB Samsung HDD
Sound blaster X-Fi gamer
I was using latest 1.14 (1.E0) BIOS version. I have Microsoft Sidewinder mouse and sometimes I had problems with my mouse. Yesterday I saw that you released new version of BIOS 1.15 which improves compatibility with gaming mouse. Without wasting time – I’ve download new 1.15 BIOS version – copy it to my booted Pen Drive. After restart system, I’ve booted form USB drive and uploaded new version of BIOS. Everything was fine till restart. System turned on for about 1,5 second, after that computer turned off. It happened every time. I’ve tried to clear CMOS by clicking on the „clear CMOS Button” on Back Panel. But it didn’t help. My computer turned on for 1,4 s and turned off. I’ve tried to “Clear CMOS Jumper” with JBAT1 jumper. But it also didn’t help. I was really pissed off. I have been uploaded BIOS for long time and I never had problems like this. I thought that I would have to return motherboard to my store. But I tried something else. I’ve put out one of my memory module (form DIMM4), suddenly my computer turned off. So I’ve enter into BIOS and set everything to default. Everything was fine. I’ve restart system, booted up. After that I’ve turned off and put in my memory module and …………. my system turned on for 1,5 s after that turned off. I was really pissed. I’ve tried with others memory slots. DIMM1, 2, 3 – and it worked OK – but with DIMM4 for was error. So I’ve download 1.E (1.14) BIOS version and upload it. Now everything is working fine (with 4 memory modules loaded) but I have still problems with my mouse. There is some problem with this 1.15 BIOS version with 4 modules loaded – or just with Corsair memory. Does anybody had the same problem?
P.S. Sorry for my English
Exactly same problem here but with GSkill memory.

Does the 790GX-G65 Support the new UEFI / Click-Bios

Hey Everyone! Does anyone know if the MSI 790GX-G65 supports the new UEFI / Click BIOS? I presume that if it does, I could use the forum's bios flashing tool to update it

Quote
Does anyone know if the MSI 790GX-G65 supports the new UEFI / Click BIOS?
No.
The board uses old-style AMIBIOS8 coded BIOS releases. There will be no UEFI (AMI Aptio coded) releases for this board.
Still, for BIOS Updates, >>Use the MSI HQ Forum USB flasher<<.

New R9 280X BIOS revision - undervolting required

Hey guys I'll try keep this as short an concise as possible whilst still being thorough
I have bought 3 R9 280X's two have arrived with a different PCB/revision
S/N 602-V277-28SB - 1 older rev. boards - BIOS
Bios version 0.15.040.000.000.003435 (113-C3865000-G77)
S/N 602-V277-44SB - 2 newer rev. board - BIOS
Bios version 0.15.042.000.003.000000 (113-C865000-X77)
I have dumped the 28SB BIOS and undervolted to 1.050 volts using ATIflash & VBE7 to modify the voltages which has worked well. However the same method for the 44SB cards results in an non functioning card when 3d acceleration is required so I am forced to use the original BIOS which has no Vcore functionality
please see attached dump of original 44SB BIOS
mediafire(dotcom)/?fwvaaz3c3za9zd6
I need to lower the Vcore of these GPU's, currently the cards are sitting at ~90C under 100% load, this will not make for a long life span, I will be improving the airflow however lowering the Vcore is an easy way to knock 200-300 watts of TDP away, look for a max temp of 60-70C
Edit; I have tried the usual software AB & Trixx to no avail

Quote from: lejimmy on 19-January-14, 08:33:59
Thanks for this post, applied those AB configuration, however my cfg file was named MSIAfterburner.cfg
Almost exactly the same situation as hypnoticspector, I have the same carbide air 540s.
Both cards with the 44SB and 042 Bios.
First card is hitting 97C and the second card is at 80C and fans at 100%.
Using these cards for mining so these temperatures are rather unacceptable.
you shop at cyberpowerpc.com too? love this case and the setup, just wish the temps would stay at 72ºc like so many review sites have shown. they're gonna get a lot of rmas...
i tried cleaning and reapplying 10.2w/mk thermal paste, top 5 stuff according to several sites, and it did not help. manually undervolting through bios and underclocking through afterburner slightly helps but only on one card, and it hits 80-82º which is still not acceptable. apologies for broaching any forum taboos, not sure how to edit my posts.

MSI GTX 770 LIGHTNING LTE EDITION ----any new version of bios?

CARD------------ MSI GTX 770 LIGHTNING LTE EDITION 2GB ( S/N: 602-V283-07SB1307060757 )
Current bios-- 80.04.C3.00.3C (P2005-0000)
LINK: http://www.mediafire.com/download/e5bj8iei3y8w8hl/GK104.rom
Any new version of bios for my card?
Tnx

No new, but here is a gop vbios if you need for your card

KT6 Delta FIS2R BIOS stopped detecting IDE1 & 2 optical drives

I am working on a new system that has developed an unusual (to me) problem. The system is partially built and consists to date of the following:
1. Chieftec MA-01BND case with Super-Flower TTGI TT-520SS (520 Watt) power supply.
2. MSI KT6 Delta FIS2R motherboard with an AMD XP2600 CPU and one stick of Corsair CMX512-2700C2 RAM.
3. Two Mitsumi MTM-1.44BL floppy drives.
4. Two Maxtor 6Y080MO HDD’s connected to SATA 1 and SATA 2, not in RAID.
5. Sony DDU1621BK DVD/CD ROM mastered on IDE1.
6. Sony DWU10A-B2 DVD/CD RW 1 mastered on IDE2.
7. Asus V9520 VS AGP video card.
8. Windows 98SE installed on HDD1.
Everything was operating properly, and I was installing software and drivers for peripherals, when the following problem appeared.
At boot-up, the MB logo pops right up; but then, it takes approximately 80 seconds for the BIOS to initiate. Boot-up then proceeds as normally, and Windows 98SE initiates normally. However, neither optical drive appears in Program Manager; and, pushing the “open” button on either drive fails to open the tray.
After the BIOS initiates, the usual message directing one to press the “DEL” key for access to BIOS Setup never appears. However, if the “DEL” key is held down anyway, the system will enter Setup. Note that there is also a delay of approximately 80 seconds for this to initiate.
Once into Setup, the “Standard CMOS Features” page indicates no IDE devices. Resetting the detections to “Auto” across the board makes no difference. Resetting the CMOS via the “Clear CMOS Jumper” and via removing the CMOS battery changes nothing except that the CMOS returns to the default settings, and the BIOS still fails to detect the optical drives.
Since SATA1 and SATA2 are detected and operating, I believe that the chipset is OK because they are served by the same Drive Station on the chipset as IDE1 and IDE2 which aren’t detected and operating. I also consider damage to the motherboard itself to be an unlikely cause because that can’t account for all of the systems, either. I suspect the BIOS because of the following:
1. The BIOS is so slow to initiate, as is the entrance into setup.
2. The direction to press the “DEL” key for access to BIOS Setup never appears.
3. The BIOS has stopped detecting the drives on IDE1 and IDE2.
4. All of these functions that take place prior to chipset initiation.
Does anyone know what happened and what needs to be done to return the BIOS to normal operation? Or, is this a board failure, after all?

Quote
Originally posted by Fredrik Åsenius
Sorry, I didn't think of the SATA when I read your specs.
Easy to do with all that info.
Quote
OK, what is BIOS eventually booting from? Is your SATA working?
What appears to be happenning is that the BIOS times out while trying to detect the IDE's (in this case, optical drives) and then just goes ahead and boots. The SATA's are working fine, as is Windows, once I wait out the time out for the BIOS. Except, of course, Windows also can't see and doesn't indicate in Program Manager the opticals that the BIOS couldn't find, which makes sense. The odd thing in this scenario is that, once the BIOS times out and goes on, it does not provide the customary message to hit "DEL" to enter Setup (but holding down "DEL" when the BIOS procedes will take me to Setup anyway!
I talked to eSupport today, and the techie says it's a BIOS problem that their update will resolve. Well, of course it WILL; they sell updates (duhhh). Being the trusting soul I am, I'd like some independent confirmation. I've posted this on 4 forums hoping to catch someone who has seen this happen before, in addition to contacting eSupport (Amibios's update shop) and MSI Support.
MSI's Support Department is, of course, silent, as usual.

What is new in the Bios aviable for Satellite A100-PSAA9?

i canot found a chanlog :(

Hi Bela
What do you search for? Do you need informations about new BIOS version or what?
At this time you will find a newest version of BIOS on the Toshiba page.
I have checked the site and it seems the 5.10 version was released on 25/01/07 and its OS independent.
Unfortunately, you will not find any information about modification of the new BIOS version.
It seems Toshiba European site doesnt provide such details.

A Bug with the new ms-6729 Bios (6729v5.30)

Hi
After updating my Bios to the new version, the motherboard detect my CPU(Athlon 2400+) as a 1800+.
I tried to change settings manually without success.
Anybody has encountred a similar problem?
Best Regards

Dir Sir,
Thank you very much for your quick answer, but i believe you didn't try
the mentioned Bios.
I'm not a novice, i mounted more than 300 computers for my clients, and
around 30 of last 50 computers are with MSI Motherboards.
Cpu Fsb for Athlon 2400+ is 133 but the ddr/fsb is 4:5 because i'm using
DDR 333 and the K7N2-V (MS-6729) is DDR 400 ready.
With all MSI motherboards i mounted, it’s enough to put the correct CPU
FSB and (Auto) to detect everything by the SPD.
Certainly it's a BUG with the new version because the Bios and Windows
detect CPU as Athlon 1800+ (1500) instead of 2400+ (20000.
Best Regards,
Lostan

MSI have finally commented on the Temp reading in there new 3.4 bios

Well like most of us that have upgraded to the 3.4 bios I have now very low CPU temps.
So low infect that I now no longer need my air condoner anymore as my PC's CPU is running so cold on air that it cools the whole room down for me..
Like so
When we the public asked MSI to comment on the finding that we found in the new bios MSI was very quick to reply and put us all straight.
MSI comments on there new Bios
I hope that this helps all these that where in doubt
Thanks you for your time

Quote
Originally posted by Graviton
Funny but I doubt they investigated the matter closely enough seeing that ur temp is 18C!!!!!!!!!
Believe it or not but that 18c is on a 2100XP @ 2316mhz! With 1.775 vcore..
But if MSI say its right then its fine by me 8o

1.7 Fis2r Bios

within the update BIOS file i dloaded there is a "HOW TO FLASH BIOS.doc" but i do not know which section to follow - AMI or AWARD or (i guess) NON_FAT32 i need to know because i am trying to get my 2*512 OCZ 3700EB to work

Hi
The Via board, thats the K8t FIS2R and FSRs use AMI Bios.
Easiest way is to make a floppy with live update, then reboot with it in drive A:. BUT REMEMBER TO DISABLE THE BOOT VIRUS PROTECTION IN THE STANDARD CMOS FEATURES IN BIOS.
The ready made bios/rescue disks are on http://www.M_M.ME.UK/macs use download list and AMD logo. Read the text, it tells you to overwrite all files EXCEPT the COMMAND.COM, to a formatted Ms Dos Startup disk(tick the item in format)
However, I do not think the bios upgrade will help the RAM, I am not sure that RAM is compatable with this board, is it on the MSI list, or in the stickies at top.
DO NOT FLASH if you are not sure, and if the comp is having problems with mem, you will corrupt the bios, and make mobo useless, get an acceptable ram before flashing. Even an old DDR2100 is better, the cheaper and more basic the RAM the better. RAM must be UNregistered and UNbuffered, NON ECC
Cheers
jocko

Any news of the BIOS update to support the Athlon X2's

Wonder when we will see the BIOS for these bad boys turning up?

Still waiting for a reliable venice/san diego bios.
Maybe the X2 will be included or come later as a separate update ?
VIA and ATI has officially stated chip-support ( 939+940 socket ) for the Athlon64 X2 dual core cpu´s.
Hot on the heels of AMD's announcement of their Dual-core Opteron processors, VIA has issued a Press Release to state that the K8T800, K8T800Pro and K8T890 chipsets support the new processors.
http://www.viaarena.com/
Have not seen any official statement from Nvidia yet.

New ***3.9*** Bios Needs Testing!

Hello everyone. First, I am on vaca and unable to test this new beta bios from MSI...plus I cannot test at higher fsb speeds with my valueram. Second, MSI is really focusing its energies to fix this 219 hypertransport cold boot bug problem. Even if it doesnt work, we need constructive input on this and I will not pass on negative comments.
Specifically, we need to test at these different fsb speeds and ht multipliers with memclock set at 200 (1:1) - assumming your memory can reach these levels:
200 - x5
219 - x4
220 - x4
245 - x4
250 - x4
255 - x4
Finally as usual, you download at your own risk... Thanks to Rebelshaven for hosting the download:
http://www.lejabeach.com/MSIK8N/k8nneo4sli/7100v150.rar

Quote from: Stick on 30-June-05, 00:50:37
rebelshaven, i hate to bring in the bad news, but nothing was fixed. i flashed the BIOS 2 hours ago and i've been trying since then solutions. 219 bug is still there. here are some results:
- MSI recomended setup - (no safe defaults because there is no such option in the BIOS) - aggresive mem timings disabled - 1.45V+9.9%, 2.7V , 1.5V, memclock 200 (1:1), mem timings auto -> 5104 CBBID
- 219, 4x HTmulti - post to windows works like charm no problems whatsoever
- 220, 4x HTmulti - no post, i've tried reset 10 times, power plug etc. - not a single post
- 220, 3x HTmulti - post to windows works very well
- 240, 4x HTmulti - no post (same trials as at 220, 4x)
- 240, 3x HTmulti - cold boot but BSOD - tried 5 times, same result
in order for you not to question my bad memory modules, i can post you a pic with them working at 240 MHz - using clock gen.
again, a stranged thing that was noticed before, looks like that at 200 memclock setting, the PCI speed goes up with the HTT speed. i can confirm that this is not happening if using a 180 or lower memclock. this maybe a thing to consider since it is known that increasing the frequency of the PCI bus causes hangs and BSODs.
also, another thing, this is a BIOS for the Diamond board - it has the Diamond logo splash screen - but it works stable at defaults on the platinum sli. more tests probably during the weekend.
This is true, this bios does have the "DIAMOND" splash screen, but I guess it doesn't matter?

[Athlon64] MSI K8T Neo FIS2R BIOS Update when? CnQ no workie!

The MSI K8T Neo FIS2R (MS-6702) hasn't had a BIOS update since 3-4-2005!
I put a Sempron 64 3000+ in my motherboard, and was very disappointed that it is recognized as an "AMD Unknown Processor". Sure, it works, but one of the reasons I bought it is in the hopes of getting AMD Cool n Quiet to work. However, apparently the AMD driver can't recognize the CPU due to the old BIOS on the motherboard.
Every other MSI skt 754 board supports Sempron E6 revision already. Why not the K8T Neo FIS2R? Where have all the MSI BIOS programmers gone? I have been waiting 2-months for a BIOS update to support the E6 Semprons. I have asked and begged MSI Tech Support. I am tempted to switch to ASUS or some other company that is actually timely with BIOS updates. Only reason I haven't yet, is this board is everything I want EXCEPT for Cool n Quiet not working. It's starting to look like there is no BIOS update in sight, so I am very disappointed.
Anyone here work for MSI can confirm there are no plans for a BIOS update? Because I don't want to wait around for something that's not going to happen.

Sorry, I didn't mean to imply I thought the mods here are MSI staff... I was just kind of hoping there's MSI staff lurking here, seeing what people think of their products or seeing what people complain about.
No, pretty much C 'n Q is the only reason I'm disappointed, but it was something I was really set on getting to work since this is a server that's up 24/7, but isn't utilized but maybe 4hrs out of a given day. I could reduce frequency and voltage, but unlike C 'n Q, it won't automatically increase speed and voltage based on demand - which is something I want since although it's a server, I also use it as a regular PC as well.
I've even tried the 2.33 beta BIOS with no change, and even found a 5.52 BIOS in their BIOS testing directory. I guess that BIOS was for a different kind of 6702, although I had pulled out the peripheral modules with AMI's MMTOOL and they looked the same as the existing BIOS, but that BIOS killed my motherboard so it couldn't have been for a regular 6702. I had to desolder the BIOS chip with a heat gun, reprogram the old BIOS back on it with an EPROM programmer, and solder in a socket. I guess that shows my dedication to get C 'n Q working!

New K8TNEO FIS2R bios V 1.3

Similar Messages

Maybe you are looking for