New kernel(8/13/08) and hal notification

After yesterday's kernel/system upgrade I got message to remove hal from etc/rc.conf as it is deprecated, or being deprecated. (Ubuntu 9.10-alpha release notes also gave similar info about hal)
If this is so what is replacing hal? --udev new version+? How will that affect # 'pacman -S hal' step for automatic xorg setup during installation(August iso version); and what daemon, if any, will replace hal in the daemon array of /etc/rc.conf?
I want to thank the Archer's for the great wikis:) KDE-4.3 is beautiful!

djszapi I am using standard 32-bit i686 version. I was wondering about message during update of 8/13 that said hal is being deprecated(?) to remove it from daemon array of /etc/rc.conf. Unless I misunderstood. Hal is still in my /etc/rc.conf.
Putting a !hal in the daemons list on reboot, got me to login window without mouse or keyboard activity. Using Mandriva's root gedit I removed the !(from hal) and my system reboots with keyboard and mouse again functioning. Just to be sure I checked with pacman and xf86-input-keyboard and -mouse were missing. They were re-installed.
I also have an /etc/rc.conf.pacnew which is like the fresh install file. Wonder when that will take-over?

Similar Messages

New kernel 2.6.34 and xorg1.8 and no audio intel sound card

I have no audio available for my: Intel Corporation 82801H (ICH8 family) HD Audio Controller
also alsamixer doesnt work anymore.........
alsamixer
cannot open mixer: No such file or directory
when I run alsaconf I get a proper detection then when I try to config I get:
Loading driver...
:: Saving ALSA Levels
[BUSY] /usr/sbin/alsactl: save_state:1504: No soundcards found...
[DONE]
:: Restoring ALSA Levels
[BUSY] /usr/sbin/alsactl: load_state:1610: No soundcards found...
[FAIL]
Setting default volumes...
amixer: Mixer attach default error: No such file or directory
everything was fine till todays updates.
tried pulse audio........ alsamixer then worked but wouldnt put through the stuff when I did alsaconf stated:
Loading driver...
:: Saving ALSA Levels
[BUSY] /usr/sbin/alsactl: save_state:1504: No soundcards found...
[DONE]
:: Restoring ALSA Levels
[BUSY] /usr/sbin/alsactl: load_state:1610: No soundcards found...
[FAIL]
Setting default volumes...
Invalid MIT-MAGIC-COOKIE-1 keyInvalid MIT-MAGIC-COOKIE-1 keyXOpenDisplay() failed
ALSA lib pulse.c:229:(pulse_connect) PulseAudio: Unable to connect: Connection refused
amixer: Mixer attach default error: Connection refused
Last edited by splippity (2010-06-21 19:35:52)

Edit: FIXED!
Hi,
Edit: Running 86_64
EDIT: Adding model=toshiba as options in /etc/modprobe.d/sound.conf worked great!!!
I am having the same problem as OP.
Same snd card: Intel Corporation 82801H (ICH8 family) HD Audio Controller
Also, when the kernel boots it shows following message(s):
Initializing USB Mass Storage driver...
scsi5 : usb-storage 2-5.6:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 32 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
phy0: Selected rate control algorithm 'iwl-agn-rs'
firewire_core: created device fw0: GUID 00023f7aae4198c2, S400
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffffa11032a9>] alc_build_controls+0x159/0x4f0 [snd_hda_codec_realtek]
PGD 7c1d3067 PUD 7c1d1067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
last sysfs file: /sys/devices/virtual/sound/timer/uevent
CPU 0
Modules linked in: snd_seq_dummy snd_hda_codec_realtek snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device arc4 snd_pcm_oss snd_hda_intel(+) ecb usb_storage snd_mixer_oss snd_hda_codec autofs4 btusb snd_hwdep fuse mmc_block cpufreq_powersave sdhci_pci uvcvideo iwlagn videodev v4l1_compat snd_pcm snd_timer snd soundcore sdhci tifm_sd usbhid hid bluetooth joydev cpufreq_ondemand v4l2_compat_ioctl32 pcmcia firewire_ohci snd_page_alloc mmc_core iwlcore nvidia(P) i2c_i801 mac80211 i2c_core video acpi_cpufreq yenta_socket firewire_core tifm_7xx1 intel_agp freq_table output rsrc_nonstatic led_class crc_itu_t tifm_core pcmcia_core cfg80211 iTCO_wdt toshiba_bluetooth uhci_hcd iTCO_vendor_support rfkill ehci_hcd r8169 mii psmouse pcspkr serio_raw evdev ac battery processor usbcore thermal sg button rtc_cmos rtc_core rtc_lib ext4 mbcache jbd2 crc16 sr_mod cdrom sd_mod pata_acpi ata_generic ata_piix ahci libata scsi_mod
Pid: 1107, comm: modprobe Tainted: P 2.6.34-ARCH #1 ISRAA/SATEGO X200
RIP: 0010:[<ffffffffa11032a9>] [<ffffffffa11032a9>] alc_build_controls+0x159/0x4f0 [snd_hda_codec_realtek]
RSP: 0018:ffff88007bf27c48 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff880078f9cc00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff88007cb273c0 RDI: ffff880078f9cc00
RBP: ffff88007bf27ca8 R08: 0000000000000000 R09: 2222222222222222
R10: 0000000000000000 R11: 0000000000000002 R12: ffff88007b635800
R13: ffff88007cb273c0 R14: 0000000000000000 R15: 0000000000000000
FS: 00007f23f8c79700(0000) GS:ffff880001800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 000000007ca03000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process modprobe (pid: 1107, threadinfo ffff88007bf26000, task ffff88007bc31560)
Stack:
ffff88007bf27c78 ffff880078f9cc00 ffff88007b635800 0000000000000001
<0> ffff88007b635808 0000000000000000 ffff88007bf27ca8 ffff880078f9cc00
<0> ffff88007b3f7658 ffff88007c664400 ffff88007f9ba088 0000000000000000
Call Trace:
[<ffffffffa106bd70>] snd_hda_codec_build_controls+0x50/0x60 [snd_hda_codec]
[<ffffffffa106bda8>] snd_hda_build_controls+0x28/0x90 [snd_hda_codec]
[<ffffffffa10ad071>] azx_probe+0x947/0x9f8 [snd_hda_intel]
[<ffffffff811cb68a>] ? kobject_get+0x1a/0x30
[<ffffffff811e9635>] pci_device_probe+0x75/0xa0
[<ffffffff8127e4ba>] ? driver_sysfs_add+0x5a/0x90
[<ffffffff8127e783>] driver_probe_device+0x93/0x1a0
[<ffffffff8127e92b>] __driver_attach+0x9b/0xa0
[<ffffffff8127e890>] ? __driver_attach+0x0/0xa0
[<ffffffff8127d77e>] bus_for_each_dev+0x5e/0x90
[<ffffffff8127e459>] driver_attach+0x19/0x20
[<ffffffff8127df77>] bus_add_driver+0xc7/0x2e0
[<ffffffff8127eba1>] driver_register+0x71/0x140
[<ffffffff81076edd>] ? notifier_call_chain+0x4d/0x70
[<ffffffff811e98c1>] __pci_register_driver+0x51/0xd0
[<ffffffff8107723c>] ? __blocking_notifier_call_chain+0x5c/0x80
[<ffffffffa10b2000>] ? alsa_card_azx_init+0x0/0x20 [snd_hda_intel]
[<ffffffffa10b201e>] alsa_card_azx_init+0x1e/0x20 [snd_hda_intel]
[<ffffffff81002149>] do_one_initcall+0x39/0x1a0
[<ffffffff8108d79f>] sys_init_module+0xdf/0x250
[<ffffffff81009ec2>] system_call_fastpath+0x16/0x1b
Code: 45 8b 5d 50 45 85 db 0f 84 d6 00 00 00 49 8b 84 24 78 01 00 00 31 d2 45 31 f6 48 85 c0 74 3b 0f 1f 00 49 63 ce 4c 89 ee 48 89 df <0f> b7 0c 48 e8 5e 44 f6 ff 85 c0 0f 88 e5 fe ff ff 41 83 c6 01
RIP [<ffffffffa11032a9>] alc_build_controls+0x159/0x4f0 [snd_hda_codec_realtek]
RSP <ffff88007bf27c48>
CR2: 0000000000000000
---[ end trace 18cfe50d22f553b9 ]---
scsi 5:0:0:0: Direct-Access SanDisk Cruzer Micro 8.01 PQ: 0 ANSI: 0 CCS
sd 5:0:0:0: Attached scsi generic sg3 type 0
sd 5:0:0:0: [sdc] 7862911 512-byte logical blocks: (4.02 GB/3.74 GiB)
sd 5:0:0:0: [sdc] Write Protect is off
sd 5:0:0:0: [sdc] Mode Sense: 45 00 00 08
sd 5:0:0:0: [sdc] Assuming drive cache: write through
sd 5:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 5:0:0:0: [sdc] Assuming drive cache: write through
sd 5:0:0:0: [sdc] Attached SCSI removable disk
Adding 1023996k swap on /swapfile. Priority:-1 extents:11 across:2121724k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:04:00.0: eth0: link up
r8169 0000:04:00.0: eth0: link up
ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:04:00.0: eth0: link up
r8169 0000:04:00.0: eth0: link up
eth0: no IPv6 routers present
Last edited by knysng (2010-06-23 19:10:34)

Arch-0.7.2-ftp.iso can't handle the new kernel [SOLVED]

hallo arch mates is there any problem when installer a fresh install from ftp with the new kernel some of my friends need to edit grup after install is it a error or is the arch-0.7.2-ftp.iso not build to handle the new kernel ??
Over And Out :?:

Mh? I don't see a problem using 0.7.2 ftp install cd. Also not when editing grub file.
But if you get problems you might try this one http://bbs.archlinux.org/viewtopic.php?t=25236
cheers,
deTTo

New kernel, no boot

Hello,
first things first, the standard supplied 2.6.32-ARCH x86_64 kernel boots fine, no udev problems and everything. So I took it's configuration for the new kernel (2.6.33-git4) made oldconfig and thinned out what I thought isn't needed. This resulted basically in a booting kernel, but when it came to running hooks I've got problems that resemble the ones in these threads, I get the message that udev already seems to be running afterwards root can't be found:
http://bbs.archlinux.org/viewtopic.php?id=81657
http://bbs.archlinux.org/viewtopic.php?pid=689678
with the difference that it doesn't boot further, it drops me to a ramfs shell because it can't find a root file system. I followed several hints in other threads like making sure the filesystems are compiled in-kernel and not as module but to no avail. What I found interesting that unlike in these threads it searches for a disk by UUID, not /dev/sdX. That the disks are still named via /dev/sdX in fstab shouldn't be the problem since it can't find /, on which fstab lies. Or is it?
mkinitcpio.conf, didn't change anything:
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES=""
# BINARIES
# This setting includes, into the CPIO image, and additional
# binaries a given user may wish. This is run first, so may
# be used to override the actual binaries used in a given hook.
# (Existing files are NOT overwritten is already added)
# BINARIES are dependancy parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in anyway. This is useful for config files.
# Some users may wish to include modprobe.conf for custom module options,
# like so:
# FILES="/etc/modprobe.conf"
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'modload' may be used in place of 'udev', but is not recommended
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
# This setup specifies all modules in the MODULES setting above.
# No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
# This setup will autodetect all modules for your system and should
# work as a sane default
# HOOKS="base udev autodetect pata scsi sata filesystems"
# This is identical to the above, except the old ide subsystem is
# used for IDE devices instead of the new pata subsystem.
# HOOKS="base udev autodetect ide scsi sata filesystems"
# This setup will generate a 'full' image which supports most systems.
# No autodetection is done.
# HOOKS="base udev pata scsi sata usb filesystems"
# This setup assembles an pata raid array with an encrypted root FS.
# Note: See 'mkinitcpio -H raid' for more information on raid devices.
# HOOKS="base udev pata raid encrypt filesystems"
# This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev usb lvm2 filesystems"
HOOKS="base udev autodetect pata scsi sata filesystems"
# COMPRESSION
# Use this to compress the initramfs image. With kernels earlier than
# 2.6.30, only gzip is supported, which is also the default. Newer kernels
# support gzip, bzip2 and lzma.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
kernel .conf, on which I later changed the filesystems from module to in-kernel, which didn't work either and produced the same error:
http://pastebin.com/me928e7d
Are there any other conf files I need to supply so that everyone can get a clue what's going on?

I tried compiling drivers and filesystems as modules and in-kernel, didn't work. Changed fstab to UUID scheme, didn't work. Started fresh and took the almost unmodified arch .config, didn't work either. In the it's still the same, first that udev error (which doesn't come up with the standard kernel) followed by two errors, can't find disk-by-uuid-blah, can't create --> ramfs shell.
Latest .config: http://pastebin.com/m34f48589
Edit: redid the whole thing again and made sure that I have all modules together, which would be these, taken from the running arch kernel:
Module Size Used by
ipv6 283303 44
ext2 62873 2
snd_seq_dummy 1439 0
snd_hda_codec_atihdmi 2683 1
snd_seq_oss 29023 0
snd_seq_midi_event 5316 1 snd_seq_oss
snd_seq 50558 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 5181 3 snd_seq_dummy,snd_seq_oss,snd_seq
fan 3378 0
snd_pcm_oss 39011 0
snd_mixer_oss 17299 1 snd_pcm_oss
snd_hda_intel 21586 0
snd_hda_codec 63659 2 snd_hda_codec_atihdmi,snd_hda_intel
snd_hwdep 6340 1 snd_hda_codec
snd_pcm 70318 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
ehci_hcd 34890 0
battery 9388 0
snd_timer 18799 2 snd_seq,snd_pcm
i2c_i801 8422 0
usbcore 140421 2 ehci_hcd
snd 57408 10 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
ac 3027 0
i2c_core 18137 1 i2c_i801
button 4714 0
thermal 11834 0
soundcore 6095 1 snd
r8169 36182 0
snd_page_alloc 7033 2 snd_hda_intel,snd_pcm
mii 3738 1 r8169
asus_atk0110 9334 0
pcspkr 1795 0
wmi 4771 0
psmouse 56346 0
sg 25275 0
serio_raw 4440 0
processor 29574 0
evdev 8825 0
rtc_cmos 8904 0
rtc_core 14631 1 rtc_cmos
rtc_lib 1810 1 rtc_core
ext4 334927 6
mbcache 5466 2 ext2,ext4
jbd2 80162 1 ext4
crc16 1273 1 ext4
ata_generic 3111 0
sr_mod 15043 0
cdrom 36354 1 sr_mod
sd_mod 26313 10
pata_jmicron 2424 0
pata_acpi 3288 0
ahci 34321 9
libata 151860 4 ata_generic,pata_jmicron,pata_acpi,ahci
scsi_mod 92676 4 sg,sr_mod,sd_mod,libata
Still no go, it can't find a hdd after that udev error.
Is there any piece of information left I could provide so that someone can help me?
Edit: Whatever the problem was, I took the exact .conf the exact latest git kernel on Ubuntu server and it works there magically, with GCC and ICC. Wonder if it was a problem with makepkg...
Last edited by p2501 (2010-01-19 09:43:46)

New message and bbm notifications have disappeared

Hi, im on a blackberry curve 8520 and am having problems with the new message, bbm and facebook notifications. they were all working fine and suddenly the phone froze, now that it has recovered none of these unread message indicators are appearing even though the phone still vibrates and the led flashes. Any help much appreciated!

Settings, general, reset, reset home screen layout.

NEW KERNEL V47, and a new hope for 720p video play...

thats right people, after matan's strange disappearing, we now have pali getting us new kernels, and his first kernel with loads of new awesome patches is in the extras devels ( v47 ) , you can try it out, same installation method as the old v46 (or v42 from the extras ), and same overclocking method too .
and now he is working on a 720p video playback patch, he already got the 720p media codecs (finally) and many users reported that they are able to play 720p mpeg4 videos on the n900 (this patch isn't in the extras devel version....yet ! ) so now we don't have a hardware problem to play 720p videos, the problem is in gstreamer (video player in the default media player) but thank god, we have MohamadAG to work on that openmedia player so we can finally get 720p video playback .
and if we can play 720p videos, we can shoot them too .
and i can say that after 40 minutes of hard usage of this new kernel my phone seems a lot smoother and abit faster than the old v46 or v42 with the same overclocking settings .
Use Hildon Application Manager or via apt-get
Step 1 Installation:
In Hildon Application Manager install package: Linux Kernel for power user
Or via apt-get package: kernel-power-flasher
Step 2 Multiboot support:
First see step 1.
Then in Hildon Application Manager install package: Linux Kernel for power user (boot image)
Or via apt-get package: kernel-power-bootimg
this is not for noobs right now, but it will be soon, and it might become a part of the cssu .
and btw if you get a 400 degrees temprature in conky don't panic, its a false value, its 40
ORIGINAL THREAD BY PALI AT talk.maemo.org .
Reality is wrong....dreams are for real... 2pac .
don't forget to hit that green kudos

ceroberts75 wrote:
i am boping we get another community udate soon. the last one brought us a great camera update, but the email is still messed up.
it will be coming...... its just tat Mag is busy with the new facebook app...... and so far i know that it includes multiple proflies support... and the camera ui has been updated 2-3 times since the last cssu update .
and for 720 p playback we are porbably going to use open medi pllayer, for anyone that wants to use it, search this forum for "open media player" , its a faster version of the original one, with more effects and smoothness .
Reality is wrong....dreams are for real... 2pac .
don't forget to hit that green kudos

What's the deal with Intel and the new kernel?

Hi
I have trouble understanding the whole deal behind Intel's video drivers and the new kernel. What doesn't work and why? Could someone please try to explain what the problem is in a way so that a newbie like me can understand it?
Thanks

Intel and Linux are transitioning to a new graphics system. We're in the middle of the transition, so everything's kinda suckish right now. Old kernel and drivers are better, development kernel and drivers are almost as good, and they will get much better soon.
www.phoronix.com for up-to-date info.

I just updated to OSX and keep getting notifications to download new versions of Pages, Keynote and Numbers, would these be free?

I just updated to OSX and keep getting notifications to download new versions of Pages, Keynote and Numbers, would these be free?

Normally, that would be excellent advice. But in this case it is not thought to be necessary.
The new copies will be installed "loose" in the Applications folder. The originals are kept in the iWork folder in the Applications folder. If you do not like the new versions, they can be discarded and the original versions will be used again.
The new versions have many new iCloud features, but some users have complained that key features they require are missing. It is thought that Apple will add them over time.

BELKIN F7D2101 and new kernel 4.x.x

After working with Arch for years and using for Internet connection
a wireless usb adaptor (BELKIN F7D2101) with netctl (static) profile,
I lost network and Internet connection after the 4.0 kernel upgrade.
The error message from booting 4.0 kernel (linux):
"WPA association/authentication failed for interface 'wlan0'
Failed to bring the network up for profile 'wlan0-conn-x193C79'
Failed to start A simple WPA encrypted wireless connection using a static IP"
The adaptor blinks while booting and stops blinking at the end of booting,
and wlan0 interface is down, although it is loading module r8712u and
rtlwifi/rtl871u.bin. Manually removing and loading module and seting up
wlan0 interface has no result for netctl (static) profile to work.
The new 4.0 kernel Arch installation cd can't set up working network
interface although it's loading the same module and firmware.
I managed to get network and internet connection with the old installation cd
and with chroot I downloaded the two other official kernels but in vain.
Especially the linux-lts kernel, which is 3.x.x series kernel never loads driver
and firmware not even manually with modprobe (fatal error) and gives error message:
"Timed out waiting for device sys-subsystem-net-devices-wlan0.device
Dependency failed for A simple WPA encrypted wireless connection using a static IP".
Finally I managed to download compile and install linux-mainline from AUR (many thanks
guys), and booting this kernel I had network and Internet connection working again.
As you see I have found a solution for my problem, but I would like to solve the problem
with more staight solutions like working linux (official) kernel and it may be help for
other users, or is it a kernel bug?
I should appreciate any help.

You don't have to put the new names at all... that's the point behind grub2's update script. Just delete the symlinks in /boot and regenerate your grub.cfg and you're done.

New kernel and problems installing nvidia-legacy drivers

I just compiled new kernel, and I can't install nvidia-legacy drivers properly. Pacman installs them, but the module (nvidia.ko) goes to /lib/modules/2.6.19-ARCH, and I want it to 2.6.19.2.. It doesn't work if I just copy the module..
I've compiled kernel many times without problems when I was still using Slackware. So, what do I need to configure to use the new module directory? I Propably made some small/stupid mistake..
I tried legacy drivers from nvidia.com, but they didnt compile.. weird, gonna try that again too..

You need to install the nvidia drivers, or any other non-kernel drivers, specifically for the kernel you are using. Arch packages the nvidia drivers to work with the Arch kernel packages, and the "Arch way" to deal with your situation is to modify the appropriate PKGBUILD to match your kernel, create a custom package with makepkg, and install it with pacman.
You can also use the nvidia installer, but in that case the nvidia files installed on your system will not be under pacman's control.

Grub2 and the new kernel (3.x.x)

Hi,
It is recommended to adapt the bootloader to the new kernel. While with grub the procedure is easy, grub2 isn't just as obvious.
I use generated /boot/grub/grub.cfg, so the only editable file should be /etc/default/grub. I can't see where to put new names (vmlinuz-linux, etc.), though.

You don't have to put the new names at all... that's the point behind grub2's update script. Just delete the symlinks in /boot and regenerate your grub.cfg and you're done.

Compiling compiling, netweaver 2004s, replace new kernel and nothing hapen!

I did as many expert said, i have installed netweaver 2004s i start the server and when you lunch sap gui and entry the system start compiling, down or stop the server and again the system do the same again compiling and compiling.
i have the new kernel but nothing hapen, system do the same.
exist one parameters to indicate that, or is the memory of the machine?
some expert that can help me.

More specific, i can login to SAP ABAP instance, i can lunch transactions and the system start the compiling as it is normal. but if i stop the sap system and start it again, the system do the same when i login, compiling and compiling.
i don't have one error message just that i know that it is not normal compile several time if you don't change nothing in the system, except for fist time.
Thanks for your help, is very important we are trying to migrate to new version of sap netweaver.

New Z10 Random reboots and text notifications STILL

June 13th I upgraded from a Torch to the Z10. 3 days later, it was randomly rebooting about 4 times a day. I went through a wipe and reinstall and it seemed to work for about a week and then it started with the random rebooting as well as telling me I had texts when I didn't, and telling me every single day that there was a software upgrade available for the very same OS I already had on the phone!
I took it into Rogers and because it was past 2 weeks my options were dismal so I went with the free option. I had them send it in to be fixed. I just picked it up today and haven't even had it back 4 hours. I just got it back to where I wanted it preference wise and blammo! Random reboots and text notifications when there are none.
My options from here? Send it in AGAIN, or pay a $120 deductible through my protection plan for a 'new' phone (= refurbished - I was told they cannot guarantee me it would be brand new), or pay for the phone outright (in the neighborhood of $600) and then start a new plan for a different brand of phone (and yes, I will convert to the other side if this doesn't get resolved properly).
So frustrated because I feel it's extremely unfair to have to pay to own a device that doesn't even work just to get out of my contract (this is my provider but if they aren't able to get their money back from BB then why would they give me mine back?)... especially given that I received it just over a month ago and already had to send it out for a repair that didn't even work!
HELP!? I've tried everything... I'm SO disappointed and frustrated. I've been a loyal BB customer for over 5 years. This is about to end if there is no resolution. I need a phone I can rely on.
Thank you in advance to the powers that be - may they have mercy!

Hey kc1881,
Welcome to the BlackBerry® Support Community Forums.
To better assist you with this issue and to gather device event logs to determine the root cause, we would request that you contact your wireless service provider to have this issue escalated to BlackBerry Technical support for further trouble shooting.
Let us know if you have any questions.
Thank you.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

New kernel and GRUB configuration

I recently downloaded and installed from the AUR the maxim patch to fix the mon0 problem with aircrack-ng.
Both makepkg and pacman -U finish without any issues.
The problem comes in when I try to set my system up to use the 2.6.8 kernel which is created by the process.
When it first finished, the new kernel was created on my "/" partition. I got them moved "/boot" partition in order to get my system set up.
The current files in my "/boot" are:
grub (folder)
lost+found (folder)
9a97750b-6285-42a6-9712-877d9ef12eca (uuid of the drive)
kernel26-img
kernel26-fallback.img
vmlinuz26
System.map26
kernel26-nx.img
kernel26-nx-fallback.img
vmlinuz26-nx
System.map26-nx
My /grub/menu.lst says:
# (0) Arch Linux
title Arch Linux
root (hd0,0)
kernel /vmlinuz26 root=/dev/disk/by-uuid/842288ba-e9a8-4a6e-8e60-4a54e4844dcd ro
initrd /kernel26-fallback.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,0)
kernel /vmlinuz26 root=/dev/disk/by-uuid/842288ba-e9a8-4a6e-8e60-4a54e4844dcd ro
initrd /kernel26-fallback.img
Under this configuration is works fine. When I switch it to:
# (0) Arch Linux
title Arch Linux
root (hd0,0)
kernel /vmlinuz26-nx root=/dev/disk/by-uuid/842288ba-e9a8-4a6e-8e60-4a54e4844dcd ro
initrd /kernel26-nx-.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,0)
kernel /vmlinuz26-nx root=/dev/disk/by-uuid/842288ba-e9a8-4a6e-8e60-4a54e4844dcd ro
initrd /kernel26-nx-fallback.img
It boots to "Waiting 10 seconds for drive..." Then puts me in to the ramfs because the drive does not respond. I am sure I am doing something wrong, I just don't know what.
Last edited by reddae (2011-04-06 05:13:19)

I changed the boot string to:
root (hd0,0)
kernel /vmlinuz26-nx root=/dev/sda3 ro
initrd /kernel26-nx.img
Waiting 10 seconds for device /dev/sda3
ERROR: Unable to determine major/minor number of root device '/dev/sda3'
You are being dropped to a recovery shell
EDIT: I just tried with all of the drives, sda1,sda2,sda3,sda4 all with the same result.
Last edited by reddae (2011-04-06 06:03:38)

Some of my bookmarked sites such as aol and facebook, look like This, suddenly: 0 1 45 Send a New Message Messages See All Messages0 unread Notifications See All Notifications Pati Beardsley Home Use Facebook as:

0
1
45
Send a New Message
Messages
See All Messages0 unread
Notifications
See All Notifications
Pati Beardsley
Home
Use Facebook as:

0
1
45
Send a New Message
Messages
See All Messages0 unread
Notifications
See All Notifications
Pati Beardsley
Home
Use Facebook as:

New kernel(8/13/08) and hal notification

Similar Messages

Maybe you are looking for