New Kernel upgrade
I Syu'd two days ago and after which, my battery started charging all the way to 100%. It also gave me the longest battery life since I've got this laptop. I've written about this before [https://bbs.archlinux.org/viewtopic.php?id=129597]. However, after an Syu yesterday, things returned to normal funny behavior. May I know what exactly you guys did to the kernel over the past few days?
skunktrader wrote:http://www.kernel.org/pub/linux/kernel/ … eLog-3.3.5
I'm sorry, but that's all greek to me. What am I supposed to be looking for?
Similar Messages
-
Ath5k probs after new kernel upgrade (/kernel26 2.6.34.3-1)
I just did a pacman -Syu and the new kernel /kernel26 2.6.34.3-1 causes issues with my ath based card. Ath5k is the kernel module I've used, and now I get a bunch of calibration errors in dmesg. Is anyone else having this issue?
I'd rather not go back to madwifi...but I will if I have to...ath5k has been pretty solid since it's come out.See my post here: https://bbs.archlinux.org/viewtopic.php?id=102751
I had problems but I am using ath9k. I partially solved mine by getting the kernel out of testing. Not sure if the two issues are related.
Good luck!!! -
What is the best way to upgrade to a new kernel?
I would like to upgrade to the new kernel: kernel26-2.6.23.14-1 from the one from core (on the CD).
What is the best way to do this? Also, is there a way to find out what is new / has changed in the new kernel?
Thanks for any insights.Gilneas wrote:
Surely you have tried pacman -Syu?
Kernel changelogs are on kernel.org. Perhaps it's more interesting to read articles on kerneltrap.org though.
I have had a kernel panic one time I upgraded a kernel. I had to walk back step-by-step to backtrack what I did.
I basically uninstalled the nv kernel driver for xorg and installed the proprietary drivers from their website (which I shouldn't have uninstalled nv drivers, but nonetheless I learned from it). But, somehow I think one of the packages I installed automatically upgraded to the lastest kernel. When I reverted to the properietary drivers it somehow uninstalled the latest kernel. The key thing I learned was "install the right drivers the first time!" But, yes, I know about "Pacman -Syu" in general, but didn't know that was the appropriate way to do it. It's just my two cents.
Last edited by smitty (2008-02-05 12:28:48) -
After Kernel Upgrade, Not reflecing the new kernel patch no
Hi All,
Our environment is ERP 6.0, Oracle 10.2 and HP-UX 11. We have upgraded the Kenel patch no 291 from 201.
When we tried the command disp+work its showing 291 but when we checked in SAP level in SM51 t-code its
showing 201. Please help to correct the issue.
Thanks,
SreekanthHello,
As you have 2 different machine types, then you should perform 2 kernel updates.
The kernel for IA64 is different from the one for PA-RISC.
In your configuration, you should have 2 physical /sapmnt/SID/exe directories. One for IA64 and the other one for PA-RISC.
In "classical" configurations , all the CI and AS run on the same kind of processor architecture. The /sapmnt/SID directory is shared between all the application servers ( wether CI or AS ) . Then when you perform a kernel upgrade in these environments, you patch in /sapmnt/SID/exe and the files are copied to all the application servers on restart by sapcpe. Sapcpe copies files that have changed from /sapmnt/SID/exe to /usr/sap/SID/<INSTANCE_DIR>/exe.
If you have a CI and 2 dialog instances of the same bytecode, this means that files are copied, for example, from /sapmnt/SID/exe to
/usr/sap/SID/DVEBMGS00/exe
/usr/sap/SID/D10/exe
/usr/sap/SID/D20/exe
In fact the disp+work processes are started from these last directories and not from /sapmnt/SID/exe. That's why you can have differences beetween what you have in /sapmnt/SID/exe and wht you see when you check in SAP through the System -> Status menu bar. This means something went wrong in the kernel update ( sapcpe not working or other things... ) .
When you use different bytecodes, then there should be 2 different physical /sapmnt/SID/exe directories ( one for eache bytecode ).
Hope i'm clear enough
Best regards,
Steve. -
Solution Manager 4.0- Kernel Upgrade(disp+work stops)
Hi,
While doing Kernel Upgrade for Solution manger 4.0 , the disp+work stops.
I have taken the Packs as per my requisite for Windows server X64 bit - Unicode
The files that were taken are :
SAPEXEDB_102-20001356.SAR
SAPEXE_102-20001354.SAR
The services were stopped,the sap was stopped and the exe backup was taken.
Now after uncar of the SAR files,and while starting the services and SAP, the disp+work stops.
The trace file of disp+work has been shown below:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid CPS
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 102
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 756
Fri Aug 10 11:14:07 2007
kernel runs with dp version 224000(ext=109000) (@(#) DPLIB-INT-VERSION-224000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 756) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 102 successfully loaded
shared lib "dw_xtc.dll" version 102 successfully loaded
shared lib "dw_stl.dll" version 102 successfully loaded
shared lib "dw_gui.dll" version 102 successfully loaded
shared lib "dw_mdm.dll" version 102 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri Aug 10 11:14:11 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >solmgr_CPS_00 <
DpShMCreate: sizeof(wp_adm) 19136 (1472)
DpShMCreate: sizeof(tm_adm) 5584592 (27784)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1848)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F320050, size: 6274496)
DpShMCreate: allocated sys_adm at 000000000F320050
DpShMCreate: allocated wp_adm at 000000000F321F40
DpShMCreate: allocated tm_adm_list at 000000000F326A00
DpShMCreate: allocated tm_adm at 000000000F326A60
DpShMCreate: allocated wp_ca_adm at 000000000F87A130
DpShMCreate: allocated appc_ca_adm at 000000000F87FEF0
DpShMCreate: allocated comm_adm at 000000000F881E30
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F908AC0
DpShMCreate: allocated gw_adm at 000000000F908B40
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F908B70
DpShMCreate: allocated wall_adm at 000000000F908B80
MBUF state OFF
DpCommInitTable: init table for 500 entries
Fri Aug 10 11:14:12 2007
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 1904
argv[0] = D:\usr\sap\CPS\DVEBMGS00\exe\jcontrol.EXE
argv[1] = D:\usr\sap\CPS\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\CPS\SYS\profile\CPS_DVEBMGS00_solmgr
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1061
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=CPS
argv[7] = -DSAPMYNAME=solmgr_CPS_00
argv[8] = -DSAPPROFILE=D:\usr\sap\CPS\SYS\profile\CPS_DVEBMGS00_solmgr
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1626]
***LOG Q0K=> DpMsAttach, mscon ( solmgr) [dpxxdisp.c 11664]
DpStartStopMsg: send start message (myname is >solmgr_CPS_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
Fri Aug 10 11:14:13 2007
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 102
Release check o.K.
Fri Aug 10 11:14:16 2007
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 384
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1067) [nixxi.cpp 4248]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=1904)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Fri Aug 10 11:14:52 2007
ERROR => W0 (pid 1548) died [dpxxdisp.c 14319]
ERROR => W1 (pid 1516) died [dpxxdisp.c 14319]
ERROR => W2 (pid 1944) died [dpxxdisp.c 14319]
ERROR => W3 (pid 1496) died [dpxxdisp.c 14319]
ERROR => W4 (pid 1968) died [dpxxdisp.c 14319]
ERROR => W5 (pid 1964) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 1980) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 2560) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 2548) died [dpxxdisp.c 14319]
ERROR => W9 (pid 3052) died [dpxxdisp.c 14319]
ERROR => W10 (pid 1808) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 980) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 1792) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:02 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri Aug 10 05:45:02 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 1548 Ended no 1 0 0
1 DIA 1516 Ended no 1 0 0
2 DIA 1944 Ended no 1 0 0
3 DIA 1496 Ended no 1 0 0
4 DIA 1968 Ended no 1 0 0
5 DIA 1964 Ended no 1 0 0
6 UPD 1980 Ended no 1 0 0
7 ENQ 2560 Ended no 1 0 0
8 BTC 2548 Ended no 1 0 0
9 BTC 3052 Ended no 1 0 0
10 BTC 1808 Ended no 1 0 0
11 SPO 980 Ended no 1 0 0
12 UP2 1792 Ended no 1 0 0
Dispatcher Queue Statistics Fri Aug 10 05:45:02 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Fri Aug 10 05:45:02 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Aug 10 05:45:02 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:07 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >solmgr_CPS_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1404) (SOFT_KILL)
Stop icman
killing process (848) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1404 HANDLE:488)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:08 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1404 HANDLE:488)
wait for end of icman
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:09 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:10 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:11 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:12 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:13 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:14 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:15 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:16 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:17 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:18 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:848 HANDLE:496)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 10 11:15:19 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:848 HANDLE:496)
[DpProcDied] Process died (PID:1904 HANDLE:472)
DpStartStopMsg: send stop message (myname is >solmgr_CPS_00 <)
NiIMyHostName: hostname = 'solmgr'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Fri Aug 10 11:15:20 2007
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11977]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 416 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 416 (pos=3)
SiSelNRemove: removed sock 416
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 416
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 756) [dpxxdisp.c 10334]
Good Bye .....
Could you please help me in resolving this issue ?...
Regards,
Radeesh VHi,
Below is the trace file of dev_ms
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 2416] Sat Aug 11 15:23:23 2007
[Thr 2416] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 73
intno 20050900
make: multithreaded, Unicode, optimized
pid 1252
[Thr 2416] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 1252) [msxxserv.c 1824]
[Thr 2416] load acl file = D:\usr\sap\CPS\SYS\global\ms_acl_info.DAT
[Thr 2416] MsGetOwnIpAddr: my host addresses are :
[Thr 2416] 1 : [172.16.82.227] SOLMGR (HOSTNAME)
[Thr 2416] 2 : [127.0.0.1] solmgr (LOCALHOST)
[Thr 2416] Sat Aug 11 15:23:24 2007
[Thr 2416] MsHttpInit: full qualified hostname = solmgr
[Thr 2416] HTTP logging is switch off
[Thr 2416] set HTTP state to LISTEN
[Thr 2416] ms/icf_info_server : deleted
[Thr 2416] *** I listen to port sapmsCPS (3600) ***
[Thr 2416] *** I listen to internal port 3900 (3900) ***
[Thr 2416] *** HTTP port 8100 state LISTEN ***
[Thr 2416] CUSTOMER KEY: >C1198656006<
[Thr 2416] Sat Aug 11 15:23:51 2007
[Thr 2416] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/urlprefix (403 Forbidden)
[Thr 2416] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/logon_groups (403 Forbidden) -
Server not starting after kernel upgrade
Hi,
I did a SAP Kernel upgrade of Patch 146 in NW2004s Unicode system
After the kernel upgrade, the SAP is not starting
Pls let me know of what can be teh reason
The following is dev_disp file
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid BWS
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 146
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 2204
Mon Jun 16 13:02:04 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 2204) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 146 successfully loaded
shared lib "dw_xtc.dll" version 146 successfully loaded
shared lib "dw_stl.dll" version 146 successfully loaded
shared lib "dw_gui.dll" version 146 successfully loaded
shared lib "dw_mdm.dll" version 146 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Mon Jun 16 13:02:09 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >WDBSSAPBWS01_BWS_01 <
DpShMCreate: sizeof(wp_adm) 23680 (1480)
DpShMCreate: sizeof(tm_adm) 5652128 (28120)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000EE80050, size: 6347104)
DpShMCreate: allocated sys_adm at 000000000EE80050
DpShMCreate: allocated wp_adm at 000000000EE82150
DpShMCreate: allocated tm_adm_list at 000000000EE87DD0
DpShMCreate: allocated tm_adm at 000000000EE87E30
DpShMCreate: allocated wp_ca_adm at 000000000F3EBCD0
DpShMCreate: allocated appc_ca_adm at 000000000F3F1A90
DpShMCreate: allocated comm_adm at 000000000F3F39D0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F47A660
DpShMCreate: allocated gw_adm at 000000000F47A6E0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F47A710
DpShMCreate: allocated wall_adm at 000000000F47A720
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 3496
argv[0] = D:\usr\sap\BWS\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\BWS\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\BWS\SYS\profile\BWS_DVEBMGS01_WDBSSAPBWS01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=BWS
argv[7] = -DSAPMYNAME=WDBSSAPBWS01_BWS_01
argv[8] = -DSAPPROFILE=D:\usr\sap\BWS\SYS\profile\BWS_DVEBMGS01_WDBSSAPBWS01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1633]
***LOG Q0K=> DpMsAttach, mscon ( WDBSSAPBWS01) [dpxxdisp.c 11822]
DpStartStopMsg: send start message (myname is >WDBSSAPBWS01_BWS_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 146
Release check o.K.
Mon Jun 16 13:02:11 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 340
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2447) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3496)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Mon Jun 16 13:02:49 2008
ERROR => DpHdlDeadWp: W0 (pid 3504) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W1 (pid 3380) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W2 (pid 4348) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W3 (pid 3528) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W4 (pid 4528) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W5 (pid 4360) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W6 (pid 788) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W7 (pid 4432) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => DpHdlDeadWp: W8 (pid 3376) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => DpHdlDeadWp: W9 (pid 3632) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => DpHdlDeadWp: W10 (pid 3928) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W11 (pid 3304) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W12 (pid 3316) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W13 (pid 4956) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => DpHdlDeadWp: W14 (pid 1136) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => DpHdlDeadWp: W15 (pid 4968) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:02:59 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Jun 16 17:02:59 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3504 Ended no 1 0 0
1 DIA 3380 Ended no 1 0 0
2 DIA 4348 Ended no 1 0 0
3 DIA 3528 Ended no 1 0 0
4 DIA 4528 Ended no 1 0 0
5 DIA 4360 Ended no 1 0 0
6 DIA 788 Ended no 1 0 0
7 DIA 4432 Ended no 1 0 0
8 UPD 3376 Ended no 1 0 0
9 ENQ 3632 Ended no 1 0 0
10 BTC 3928 Ended no 1 0 0
11 BTC 3304 Ended no 1 0 0
12 BTC 3316 Ended no 1 0 0
13 BTC 4956 Ended no 1 0 0
14 SPO 1136 Ended no 1 0 0
15 UP2 4968 Ended no 1 0 0
Dispatcher Queue Statistics Mon Jun 16 17:02:59 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
5
5
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Mon Jun 16 17:02:59 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Jun 16 17:02:59 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:04 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >WDBSSAPBWS01_BWS_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1724) (SOFT_KILL)
Stop icman
killing process (2860) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1724 HANDLE:448)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:05 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1724 HANDLE:448)
wait for end of icman
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:06 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:07 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:08 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:09 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:10 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:11 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:12 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:13 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:14 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:15 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:16 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2860 HANDLE:456)
[DpProcDied] Process died (PID:3496 HANDLE:432)
DpStartStopMsg: send stop message (myname is >WDBSSAPBWS01_BWS_01 <)
NiIMyHostName: hostname = 'WDBSSAPBWS01'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Mon Jun 16 13:03:17 2008
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12168]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 364 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 364 (pos=3)
SiSelNRemove: removed sock 364
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/16
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 364
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2204) [dpxxdisp.c 10421]
Good Bye .....Are you sure the Database and the listeners are up and running?
-
Failed to install the new kernel pkg
I just downloaded a new kernel pkg from
archlive-pkg
this is the new kernel pkg I downloaded.
kernel26-snapshot-2.6.31-rc6-git6-i686.pkg.tar.gz
when I ran
pacman -U kernel26-snapshot-2.6.31-rc6-git6-i686.pkg.tar.gz
, it complaint there is a conflict issue~
How can i install the package? thanks!
loading package data...
checking dependencies...
(1/1) checking for file conflicts [#####################] 100%
error: failed to prepare transaction (conflicting files)
kernel26-snapshot-2.6.31: /boot/System.map26 exists in filesystem
kernel26-snapshot-2.6.31: /boot/vmlinuz26 exists in filesystem
kernel26-snapshot-2.6.31: /etc/mkinitcpio.d/kernel26.kver exists in filesystem
kernel26-snapshot-2.6.31: /etc/mkinitcpio.d/kernel26.preset exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/3com/typhoon.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/acenic/tg1.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/acenic/tg2.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/adaptec/starfire_rx.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/adaptec/starfire_tx.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/advansys/3550.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/advansys/38C0800.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/advansys/38C1600.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/advansys/mcode.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/atmsar11.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/bnx2/bnx2-mips-06-4.6.16.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/bnx2/bnx2-mips-09-4.6.17.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/bnx2/bnx2-rv2p-06-4.6.16.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/bnx2/bnx2-rv2p-09-4.6.15.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/cis/LA-PCM.cis exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/cxgb3/t3b_psram-1.1.0.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/cxgb3/t3c_psram-1.1.0.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/e100/d101m_ucode.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/e100/d101s_ucode.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/e100/d102e_ucode.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/edgeport/boot.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/edgeport/boot2.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/edgeport/down.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/edgeport/down2.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/edgeport/down3.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/emi26/bitstream.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/emi26/firmware.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/emi26/loader.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/emi62/bitstream.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/emi62/loader.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/emi62/midi.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/emi62/spdif.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/ess/maestro3_assp_kernel.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/ess/maestro3_assp_minisrc.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/kaweth/new_code.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/kaweth/new_code_fix.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/kaweth/trigger_code.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/kaweth/trigger_code_fix.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/keyspan_pda/keyspan_pda.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/keyspan_pda/xircom_pgs.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/korg/k1212.dsp exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/mts_cdma.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/mts_edge.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/mts_gsm.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/ositech/Xilinx7OD.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/qlogic/1040.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/qlogic/12160.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/qlogic/1280.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/sun/cassini.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/tehuti/bdx.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/ti_3410.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/ti_5052.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/tigon/tg3.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/tigon/tg3_tso.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/tigon/tg3_tso5.bin exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/whiteheat.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/whiteheat_loader.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/yamaha/ds1_ctrl.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/yamaha/ds1_dsp.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/yamaha/ds1e_ctrl.fw exists in filesystem
kernel26-snapshot-2.6.31: /lib/firmware/yamaha/yss225_registers.bin exists in filesystem
errors occurred, no packages were upgraded.yunkwan wrote:
bangkok_manouel wrote:another option:
pacman -Rd kernel26-firmware && pacman -U kernel26-snapshot-2.6.31-rc6-git6-i686.pkg.tar.gz
after I run
pacman -Rd kernel26-firmware mkinitcpio
loading package data...
checking dependencies...
(1/1) checking for file conflicts [#####################]
100%
error: failed to prepare transaction (conflicting files)
kernel26-snapshot-2.6.31: /boot/System.map26 exists in filesystem
kernel26-snapshot-2.6.31: /boot/vmlinuz26 exists in filesystem
which pkg else should I remove?
your kernel. i'd recommend you to do that first:
cp /boot/System.map26 /boot/System.map26.old
cp /boot/vmlinuz26 /boot/vmlinuz26.old
in case of problem with your newly installed kernel, edit the grub entry at boot according to the new back-up names above.
then simply:
pacman -Uf kernel26-snapshot-2.6.31-rc6-git6-i686.pkg.tar.gz
also, why has mkinitcpio been removed? reinstall it before installing your new kernel. -
"disp+work" process in not getting started after kernel upgradation
Hello Experts,
Good day…..,
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741, but the “disp+work” process is not getting started after kernel upgrade.
I have posted “dev_W0” log &
“disp+work” command result obtained in CMD prompt of respective server.
Please help me out in this. Thanks all in advance.
“dev_w0” Log”
trc file: "dev_w0", trc level: 1, release: "741"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
M sysno 55
M sid TNG
M systemid 562 (PC with Windows NT)
M relno 7410
M patchlevel 0
M patchno 42
M intno 20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile D:\usr\sap\TNG\SYS\profile\TNG_DVEBMGS55_ABTHMSSB01
M pid 2392
M
M
M Wed Jul 23 02:04:35 2014
M kernel runs with dp version 208000(ext=117000) (@(#) DPLIB-INT-VERSION-208000-UC)
M length of sys_adm_ext is 500 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 2392) [dpInit.c 731]
M DpCommonParamInit: rdisp/core_file_size = default --> no change
I MtxInit: 30000 0 0
M
M Wed Jul 23 02:04:36 2014
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: alloate/attach shared memory (mode=ATTACH)
M DpShMCreate: sizeof(wp_adm) 24288 (1104)
M DpShMCreate: sizeof(tm_adm) 51472080 (256080)
M DpShMCreate: sizeof(ca_adm) 432000 (72)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/7464064/7583152
M DpShMCreate: sizeof(comm_adm) 7583152 (14904)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (296)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (80)
M DpSockTableSize: max/headSize/ftSize/tableSize=500/16/520064/520080
M DpShMCreate: sizeof(sock_adm) 520080 (1016)
M DpShMCreate: sizeof(vmc_adm) 0 (3208)
M DpShMCreate: sizeof(wall_adm) (ft=41664/fi=67472/hd=64/rec=192)
M DpShMCreate: sizeof(amc_rec_adm) (ft=86464/fi=67472/hd=64/rec=416)
M DpShMCreate: sizeof(websocket_adm) (ft=28864/hd=64/rec=272)
M DpShMCreate: sizeof(gw_adm) 64
M DpShMCreate: sizeof(j2ee_adm) 3936
M DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000103D0050, size: 60433936
M DpShMCreate: allocated sys_adm at 00000000103D0250
M DpShMCreate: allocated wp_adm_list at 00000000103E20F0
M DpShMCreate: allocated wp_adm at 00000000103E2410
M DpShMCreate: allocated tm_adm_list at 00000000103E84F0
M DpShMCreate: allocated tm_adm at 00000000103E8730
M DpShMCreate: allocated ca_adm at 00000000134FF000
M DpShMCreate: allocated comm_adm at 0000000013568980
M DpShMCreate: system runs without slock table
M DpShMCreate: allocated sock_adm at 0000000013CA4130
M DpShMCreate: allocated vmc_adm_list at 0000000013D232C0
M DpShMCreate: system runs without VMC
M DpShMCreate: allocated gw_adm at 0000000013D23560
M DpShMCreate: allocated j2ee_adm at 0000000013D237A0
M DpShMCreate: allocated ca_info at 0000000013D24900
M DpShMCreate: allocated wall_adm (ft) at 0000000013D24B40
M DpShMCreate: allocated wall_adm (fi) at 0000000013D2F000
M DpShMCreate: allocated wall_adm (head) at 0000000013D3F990
M DpShMCreate: allocated amc_rec_adm (ft) at 0000000013D3FBD0
M DpShMCreate: allocated amc_rec_adm (fi) at 0000000013D54F90
M DpShMCreate: allocated amc_rec_adm (head) at 0000000013D65920
M DpShMCreate: allocated websocket_adm (ft) at 0000000013D65B60
M DpShMCreate: allocated websocket_adm (head) at 0000000013D6CE20
M DpShMCreate: initialized 21 eyes
M DpCommAttachTable: attached comm table (header=0000000013568980/ft=0000000013568990/fi=0000000013C86E10)
M DpSockAttachTable: attached sock table (header=0000000013CA4130/ft=0000000013CA4140)
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X <ES> EsILock: use Semphore 33 for locking
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X
X Wed Jul 23 02:04:37 2014
X mm.dump: set maximum dump mem to 96 MB
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Wed Jul 23 02:04:44 2014
M ThInit: running on host ABTHMSSB01
I MtxInit: 0 0 0
M
M Wed Jul 23 02:04:45 2014
M calling db_connect ...
B Loading DB library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' is "741.10", patchlevel (0.42)
C Prepending D:\usr\sap\TNG\DVEBMGS55\exe to Path.
C Register application info.
C
C Wed Jul 23 02:04:47 2014
C Oracle client version: 10.2.0.4.0, (dbsl 741 040714, UNICODE[2])
C Detailed Oracle client (patch) info not available.
C *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c 2406]
C Only Secure Connect method possible.
M ***LOG R19=> ThDbConnect, db_connect ( DB-Connect 000256) [thDatabase.c 76]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step TH_INIT, thRc ERROR-DB-CONNECT_ERROR, action STOP_WP, level 1) [thxxhead.c 2281]
M Wed Jul 23 02:04:48 2014
M
M Info for wp 0
M
M pid = 2392
M severity = 0
M status = 0
M stat = WP_NEW
M waiting_for = NO_WAITING
M workerType = DP_WORKER_DIAWP
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M report = > <
M action = 0
M tab_name = > <
M
M ThIErrHandle: no current incoming request
M
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ABTHMSSB01_TNG_55 on host ABTHMSSB01 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Wed Jul 23 02:04:48 2014
M * RELEASE 741
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 16797709
M * MODULE D:/depot/bas/741_REL/src/krn/si/th/thxxhead.c
M * LINE 2470
M * COUNTER 1
M *
M *****************************************************************************
M
M PfRejectStatistic: clear statistic record
M PfClearAllRec: clear statistic area
M PfClearAllRec: statRecordAction = STAT_RECORD_ACTION_REJECT
M Entering TH_CALLHOOKS
M ThCallHooks: call hooks for event BEFORE_DUMP
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 2392) [dpnttool.c 335]
“Desp+Work” Command result:
C:\Users\tngadm>disp+work
disp+work information
kernel release 741
kernel make variant 741_REL
compiled on NT 6.0 6002 x86 MS VC++ 16.00 for NTAMD64
compiled for 64 BIT
compilation mode UNICODE
compile time Jul 9 2014 16:39:46
update level 0
patch number 42
source id 0.042
RKS compatibility level 0
supported environment
database (SAP, table SVERS) 700
710
701
702
703
711
720
730
731
732
738
740
operating system
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
Windows NT 6.1
Windows NT 6.2
Windows NT 6.3
C:\Users\tngC *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c 2406]
C Only Secure Connect method possible.
For this issue you need to set up SSFS.
1639578 - SSFS as password storage for primary database connect
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741
Are you sure kernel 741 is compatible with an EHP 4 system ?
Read this SAP note
1969546 - Release Roadmap Kernel 740
Regards
RB -
Internet does not work after kernel upgrade...
I have been reading all of the other threads and have tried everything possible to downgrade my kernel to 2.6.26 rather then 2.6.27. I have found a package for kernel 2.6.26.2-1 and nvidia 173.14.12-2 but they do not mix and wont let me start x when i downgrade both of them. Is there some way i can get past this as not having internet is frustrating
Edit:
I have tried using this
echo 0 >/proc/sys/net/ipv4/tcp_sack
echo 0 >/proc/sys/net/ipv4/tcp_dsack
and it did not work, i have also tried downgrading dhcpcd and that didn't work so i'm assumin git is infact the kernel.
Edit again:
When downgrading both the kernel and nvidia with those two packages i found, my computer boots up fine up untill i get to the command line to type "startx". The i get this error message after typing "startx" :
Error: API mismatch: the nvidia kernel module has version 173.14.12, but thus nvidia driver component has version 177.80. Please make sure that the kernel module and all NVIDIA driver components have the same version.
After i got this i went and reinstall kernel 2.6.27 and the latest nvidia to look at the nvidia package i had installed. I extracted it and all the was in it was a hierarchy of folders "/lib/modules/2.6.26-ARCH/kernel/drivers/video/nvidia.ko" and that nvidia.ko file. Is it possible that i'm not installing the driver jsut a kernel module?
Once again... Edit lol:
Also i found a package for nvidia-utils and installed it with nvidia and the kernel and i can "startx", but it freezes everytime and i have to manually restart the computer with the reset button
Last edited by opeth115 (2008-10-19 22:03:56)I use nvidia96xx legacy drivers with no trouble, so I'm not sure I'll be of much help. I did read the announcment that nvidia no longer supports a certain card/cards, and there is a new legacy driver in the repo. Maybe you need to be using that one?
Also, I wasn't effected with any issues with the new kernel, but I did have a small issue with dhcpcd shortly after the kernel upgrade. It kept failing when trying to connect to the Internet. It was a simple fix though. I compared my /etc/conf.d/dhcpcd with /etc/conf.d/dhcpcd.pacnew and there was a significant difference.
I was using the string....
DHCPCD_ARGS="-N -t 30 -h $HOSTNAME"
I just needed to change it to the string in dhcpcd.pacnew....
DHCPCD_ARGS="-q -L -t 30 -h $HOSTNAME"
Anyway, sorry if this doesn't help. -
SAP does not start after Kernel Upgrade
Hi
We were carrying out the Kernel upgrade on our HPUX 11.23 and Oracle, R3 Quality System. From Kernel 196 to Kernel 221
After carrying taking a backup of the current exe folder we have copied the new exe ( after Uncar )
We restarted the system
We then started the Lsnrctl and it started successfully.
After login in as SIDadm and issuing the startsap command it gives the following error message in the startup log
Execute Pre-Startup Commands
(2987) Local: rm -f ms.sapEEQ_SCS01
(2990) Local: ln -s -f /usr/sap/EEQ/SYS/exe/runU/msg_server ms.sapEEQ_SCS01
(2993) Local: rm -f en.sapEEQ_SCS01
(2996) Local: ln -s -f /usr/sap/EEQ/SYS/exe/runU/enserver en.sapEEQ_SCS01
Starting Programs
sh: /usr/sap/EEQ/SYS/exe/runU/sapcontrol: not found.
(3002) Starting: local ms.sapEEQ_SCS01 pf=/usr/sap/EEQ/SYS/profile/EEQ_SCS01_eqc
r3
(3003) Starting: local en.sapEEQ_SCS01 pf=/usr/sap/EEQ/SYS/profile/EEQ_SCS01_eqc
r3
(2976) Waiting for Child Processes to terminate.
(2976) **** 2008/04/17 22:18:28 Child 3002 terminated with Status 150 . ****
(2976) **** 2008/04/17 22:18:28 Child 3003 terminated with Status 150 . ****
(2976) **** No more Child Processes to wait for.
(2976) Parent Shutdown at 2008/04/17 22:18:28
Execute Post-Shutdown Commands
sh: /usr/sap/EEQ/SYS/exe/runU/sapcontrol: not found.
(2976) Exiting with Return-Code 3.
Startup of Instance failed (No more child processes)
After this we have restored the backup....after restart etc...it still gives the same error
Can anyone exeperienced such a problem. Would appricate if you could share on how you resolved the same.
Regards,
Milind KaroorHi Milind!
Just make sure that you have uncarred both OS dependent and independent files
And also make sure that you copy to the existing folder of RUN (make sure your folder name is RUN)after taking a backup.
As You copy it asks to overwrite, then you overwrite the existing ones.
By doing this some of the files which will not be present in the new Kernel will be present., sometimes this may be also one of the reason
As i have faced the same problem
Thanks,
KIRAN
Edited by: kiran d on Apr 18, 2008 12:54 PM -
Kernel upgrade having ABAP+JAVA instance
Hi team,
Can you provide the procedure how to kernel upgrade for our windows system having ABAP+JAVA instance releae version 700.
Provide the links, your replies are very helpful.
Regards
BhaskarHi Bhaskar,
You can use JSPM too in this case. Otherwise if you want to do it the old fashioned way:
> Stop SAP, Database, Saprouter, listeners and all the
related services.
> The location of the kernel is /usr/sap/<SID>/SYS/exe/run
> Take a backup of the files in this location and take a
print out of the ls -ltr (This is needed to give the new files the
correct permissions)
> Overwrite all the new files to the kernel location. The
purpose is to retain the old files for which the new version is not
available.
> The permissions of the file need to be changed as they
were before.
> Restart all the processes. The kernel upgrade is
now done. System
> status will give the newer version of the kernel.>
>
disp+work
Will give the
new Kernel version.
Finding files easily: http://www.easymarketplace.de/KernelPatches.php
Regards,
hemanth -
[SOLVED] Laptop freezes at startup after kernel upgrade to 3.13.6
Some days ago I got a new Dell Sputnik 3 Laptop and installed Arch Linux with UEFI Boot and gummiboot as bootloader. The installation was successful.
However two days ago there was an upgrade for the Linux Kernel from 3.13.5 to 3.13.6. When I restarted the Laptop after the upgrade of the kernel the Laptop freezed directly after pushing the power button (never got ahead of the initial DELL logo).
I ran the DELL hardware diagnostics to identify a possible damage of the SSD but everything was ok. Than I booted into a live system ad mounted the root partition and there was no problem work on it. Additionally I change the value of timeout in gummiboots loader.conf (it was commented out before). Since than I got the gummiboot boot menu at least. So narrowing down, I think something happened during the kernel upgrade. Unfortunately I have no clue what could it be since I am convinced that at the installation process some days before I did everything like it was described at the beginners guide so automatic gummiboot update had to be possible.
The drive is partitioned in the live system looks like this (look at sda):
├─sda1 8:1 0 512M 0 part /boot
└─sda2 8:2 0 235G 0 part /
fstab like this:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sda2
UUID=3f216fdb-f4c6-459a-856f-6f246d7a5bff / ext4 rw,relatime,data=ordered 0 1
# /dev/sda1
UUID=0F8F-2A3B /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 2
# swap
/swapfile none swap defaults 0 0
I have and arch.conf in gummiboot looking like this:
title Arch Linux
linux /vmlinuz-linux
initrd /initramfs-linux.img
options root=/dev/sda2 rw
and the loader.conf of gumiboot looking like this:
timeout 5
default 56cccedc29f1418ab2d8f1762ea09471-*
Now, I don't know anymore how to proceed to identify the problem and hopefully solve it
Last edited by cutuchiqueno (2014-03-11 21:47:32)looks like this issue might be the same:
https://bbs.archlinux.org/viewtopic.php?id=172961&p=1
If I find time I might try using an alternative to gummiboot to see if this works.
Update: There also seems to be a reopened bug report on this https://bugs.archlinux.org/task/33745
Last edited by Strawpants (2014-03-10 21:26:26) -
Hi Gurus,
I have questions regarding kernel upgarade. I have downloaded db dependent and independent .sar files and put it in new folder outside the directory usr/sap/SID/sys/exe/uc. Now my questions:
1. Is it ok to uncar .sar files in my own directory?
2. After unpacking .sar files, do i need to transfer the files to the directory usr/sap/SID/sys/exe/uc?
I need your expert opinion on this since this is the first time I do kernel upgrade. If anyone happens to have document on kernel upgrade in Windows, much appreciated.
Regards,
Eleazar4 ETW000 r3trans version 6.14 (release 700 - 03.11.09 - 14:15:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 02.03.2010 - 18:41:56
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Tue Mar 02 18:41:57 2010 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dboraslib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] DlLoadLib success: LoadLibrary("dboraslib.dll"), hdl 0, addr 00000001887A0000
4 ETW000 44134 0.044134
4 ETW000 [dev trc ,00000] using "E:\usr\sap\BPF\SYS\exe\uc\NTAMD64\dboraslib.dll" 11 0.044145
4 ETW000 [dev trc ,00000] Library 'dboraslib.dll' loaded 13 0.044158
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dboraslib.dll 15 0.044173
4 ETW000 [dev trc ,00000] Version of 'dboraslib.dll' is "700.08", patchlevel (0.234) 208 0.044381
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dboraslib.dll 12 0.044393
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dboraslib.dll 21 0.044414
4 ETW000 [dev trc ,00000] New connection 0 created 21 0.044435
4 ETW000 [dev trc ,00000] 000: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000 reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 35 0.044470
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 17 0.044487
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse: 11 0.044498
4 ETW000 [dev trc ,00000] 000: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000 reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 28 0.044526
4 ETW000 [dev trc ,00000] CLIENT_ORACLE_HOME is not set as environment variable or 206 0.044732
4 ETW000 DIR_CLIENT_ORAHOME is not set as profile parameter.
4 ETW000 assuming using instant client with unspecified location.
4 ETW000 [dev trc ,00000] -->oci_init1 33 0.044765
4 ETW000 [dev trc ,00000] Oracle Client Version: '10.2.0.4.0' 11245 0.056010
4 ETW000 [dev trc ,00000] Default connection: tnsname ='BPF' 24 0.056034
4 ETW000 [dev trc ,00000] -->oci_initialize(con_hdl=0, char='', nchar='') 15 0.056049
4 ETW000 [dev trc ,00000] application info callback registered 12 0.056061
4 ETW000 [dev trc ,00000] OCIEnvCreate(mode=16384=OCI_UTF16) returned 0 (for default NLS handle)
4 ETW000 1598 0.057659
4 ETW000 [dev trc ,00000] OCIHandleAlloc(OCI_HTYPE_ERROR, con_hdl=0, ErrHp=0000000000316200)
4 ETW000 103 0.057762
4 ETW000 [dev trc ,00000] OCIHandleAlloc(OCI_HTYPE_ERROR, con_hdl=0, ErrBt=000000000032A9C8)
4 ETW000 28 0.057790
4 ETW000 [dev trc ,00000] Client character set UTF16 -> UTF8 149 0.057939
4 ETW000 [dev trc ,00000] Client NLS setting (OCINlsGetInfo): connection handle 0 -> 'AMERICAN_AMERICA.UTF8'
4 ETW000 21 0.057960
4 ETW000 [dev trc ,00000] charset='', chset='UTF8', UNI_ASC=FALSE/FALSE 12 0.057972
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPSR3's password 12 0.057984
4 ETW000 [dev trc ,00000] Connecting as /@BPF on connection 0 (nls_hdl 0) ... (dbsl 700 251109)
4 ETW000 22 0.058006
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet EnvHp ErrHp ErrHpBatch
4 ETW000 22 0.058028
4 ETW000 [dev trc ,00000] 0 UTF8 000000000030DFD0 0000000000316200 000000000032A9C8
4 ETW000 22 0.058050
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 25 0.058075
4 ETW000 [dev trc ,00000] Allocating server context handle 16 0.058091
4 ETW000 [dev trc ,00000] Attaching to DB Server BPF (con_hdl=0,svchp=000000000032A888,srvhp=00000000096DC0E8)
4 ETW000 37 0.058128
4 ETW000 [dev trc ,00000] Assigning server context 00000000096DC0E8 to service context 000000000032A888
4 ETW000 132293 0.190421
4 ETW000 [dev trc ,00000] Allocating user session handle 33 0.190454
4 ETW000 [dev trc ,00000] Starting user session: OCISessionBegin(con_hdl=0, usr='/',svchp=000000000032A888, srvhp=00000000096DC0E8, usrhp=0000000009770C70)
4 ETW000 47 0.190501
4 ETW000 [dev trc ,00000] OCISessionBegin(OCI_DEFAULT) failed with -1=OCI_ERROR 30256 0.220757
4 ETW000 [dev trc ,00000] OCISessionBegin(OCI_DEFAULT) failed with SQL error 1033: 70 0.220827
4 ETW000 [dev trc ,00000] ORA-01033: ORACLE initialization or shutdown in progress
4 ETW000 24 0.220851
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=1,svrhp=00000000096DC0E8) 14 0.220865
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=000000000032A888,srvhp=00000000096DC0E8)
4 ETW000 21 0.220886
4 ETW000 [dev trc ,00000] Deallocating server context handle 00000000096DC0E8 from con_hdl=0 315 0.221201
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1033' 44 0.221245
4 ETW000 [dev trc ,00000] set_ocica() -> SQL error code 1033 16 0.221261
4 ETW000 [dev trc ,00000] -->oci_get_errmsg (con_hdl=0, rc=1033) 14 0.221275
4 ETW000 [dev trc ,00000] OCIErrorGet -> SQL error code: 1033 51 0.221326
4 ETW000 [dev trc ,00000] ORA-01033: ORACLE initialization or shutdown in progress
4 ETW000 23 0.221349
4 ETW000 [dev trc ,00000] Try to connect with default password 13 0.221362
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@BPF on connection 0 (nls_hdl 0) ... (dbsl 700 251109)
4 ETW000 19 0.221381
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet EnvHp ErrHp ErrHpBatch
4 ETW000 20 0.221401
4 ETW000 [dev trc ,00000] 0 UTF8 000000000030DFD0 0000000000316200 000000000032A9C8
4 ETW000 22 0.221423
4 ETW000 [dev trc ,00000] Allocating server context handle 12 0.221435
4 ETW000 [dev trc ,00000] Attaching to DB Server BPF (con_hdl=0,svchp=000000000032A888,srvhp=00000000096DC0E8)
4 ETW000 31 0.221466
4 ETW000 [dev trc ,00000] Assigning server context 00000000096DC0E8 to service context 000000000032A888
4 ETW000 9132 0.230598
4 ETW000 [dev trc ,00000] Assigning username to user session: con_hdl=0, usrhp=0000000009770C70
4 ETW000 25 0.230623
4 ETW000 [dev trc ,00000] Assigning password to user session: con_hdl=0, usrhp=0000000009770C70
4 ETW000 28 0.230651
4 ETW000 [dev trc ,00000] Starting user session: OCISessionBegin(con_hdl=0, usr=SAPSR3/<pwd>, svchp=000000000032A888, srvhp=00000000096DC0E8, usrhp=0000000009770C70)
4 ETW000 111 0.230762
4 ETW000 [dev trc ,00000] OCISessionBegin(OCI_DEFAULT) failed with -1=OCI_ERROR 27312 0.258074
4 ETW000 [dev trc ,00000] OCISessionBegin(OCI_DEFAULT) failed with SQL error 1033: 54 0.258128
4 ETW000 [dev trc ,00000] ORA-01033: ORACLE initialization or shutdown in progress
4 ETW000 22 0.258150
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=1,svrhp=00000000096DC0E8) 13 0.258163
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=000000000032A888,srvhp=00000000096DC0E8)
4 ETW000 18 0.258181
4 ETW000 [dev trc ,00000] Deallocating server context handle 00000000096DC0E8 from con_hdl=0 261 0.258442
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1033' 28 0.258470
4 ETW000 [dev trc ,00000] set_ocica() -> SQL error code 1033 12 0.258482
4 ETW000 [dev trc ,00000] -->oci_get_errmsg (con_hdl=0, rc=1033) 12 0.258494
4 ETW000 [dev trc ,00000] OCIErrorGet -> SQL error code: 1033 44 0.258538
4 ETW000 [dev trc ,00000] ORA-01033: ORACLE initialization or shutdown in progress
4 ETW000 30 0.258568
4 ETW000 [dblink ,00433] ***LOG BY2=>sql error 1033 performing CON [dblink#8 @ 433] 43 0.258611
4 ETW000 [dblink ,00433] ***LOG BY0=>ORA-01033: ORACLE initialization or shutdown in progress [dblink#8 @ 433]
4 ETW000 19 0.258630
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'BPF'" -
Kernel Upgrade : Few Doubts
during kernel upgrade.
I renamed original kernel exe to exe.old > mv exe exe.XX
downloaded two SAR & uncarded files to a directory and renamed it to exe. > mv exe.YY exe
after found there were multiple files were missing in new kernel.
is that some thing happen ?Hi
As Nicholas said dont rename the exe folder,after extracting new kernel files just copy those files into your exe folder,because two files what you have download doesn't give all files which are necessary to start the SAP.
So you better extract files into new folder,copy those files into your exe folder using below command.
>cp -rp <newfiles> /sapmnt/<SID>/exe
some times it may give warning saying that some files cann't be replaced because files are in use.
Then just note down that file names and rename that file in exe folder like below.
>cd /sapmnt/<SID>/exe
>mv <filename> <filename>.old
Again you copy new files to exe.
>cp -rp <newfiles> /sapmnt/<SID>/exe -
Unusual problem in kernel upgrade in grub UUID
FWIW ::grub wiki shows a forward slash in the grub line for UUID at the beginning of the UUID data.
The grub generated by the new kernel linux-3.0-1 inserts an equals sign. This user is not aware if all downloads provide this difference.
With the equals sign, my UUID was not recognized for the root partition.
After inserting the forward slash, the system booted correctly into kde desktop.
This change was necessary for both arch linux boot and fallback boot.
I also had to change the grub menu.lst kernel line to make it permanent and the same for the fallback kernel line in grub menu.lst.
With the equals sign in the grub kernel line my boots produced an error message::::unable to determine major-minor number of root device.......
Perhaps this info will help others in upgrading .
EDIT: My system is x86_64
Last edited by lilsirecho (2011-08-11 06:43:51)Hi Shiva,
You may refer SAP Notes 19466 and 684106, which tells you procedure to download and implement latest Kernel patch levels.
You can check whether your kernel patch level is upgraded or not, following below procedure.
System--> status > other Kernel info> Patche level
or
Transaction SM50> Processes> Process info-->Patch Level.
Coming to next question, you can find whether kernel is 32 bit or 64 bit, using the platform ID.
You can find this platform ID in your system,
system--> status.
Now relate this Platform to SAP Note 146289, where you can find the correct bit of your kernel.
If you need any other information, please reply me.
Thanks and Regards,
Pavan Kumar Gali.
Maybe you are looking for
-
Woke up yesterday morning to find email not working on my main account and the two sub. accounts (wife and her sisters). I use Mac Mail on an iMac. Logged in to MYBT to find I had been changed over. So I went through the process of merging with the B
-
Passing internal tables as parameters to subroutines
Hi, This was going to be a question but I just had it answered by someone. Hopefully, this piece of information is going to be useful to other people as well. I had a subroutine in my code which looks like this. form fr_sub_get_data USING uf_file
-
IPhoto does not recognize Tiff format
I am trying to import my photos in TIFF ext however I get a response from iPhoto that it does not recognize the format. What I am doing wrong? thank You!
-
Iphoto is using Calculator application to open photos...help!
I can import a photo into IPhoto ok but when I click on it to edit it is trying to use the Calculor application to open the photo and it says Calculator can not open that file. How can I fix this?
-
Hi, Can I simply this code.. according to performance
Hi, Could you any one help me in simplyfying or arranging in right way... LOOP AT GT_CRED WHERE USERNAME IN SO_ERNAM AND UDATE IN SO_ERDAT. IF ( GT_CRED-TABNAME = 'EKKO' ) OR ( G