New keyboard and intel iMac not working at startup with Leopard. Help?
Hi,
I'm using an Intel Core Duo 20" iMac and Apples' new keyboard. With Tiger, at first the keyboard wasn't recognized by the system during startup. After installing keyboard software update 1.2 everything worked fine.
Now I've installed Leopard and I'm back to where I was: the keyboard again isn't recognized at startup, so I'm forced to use the remote during startup to change to the windows partition , and I'm not able to reset PRAM settings.
Anyone with a solution?
Thanks
Start-up commands are NOT recognized on Core Duos - YET...
there is an expected firmware update in the near future
for all start-up commands - use the old keyboard
ALSO - holding down the menu button on your remote during start-up allows you to select a start-up drive while moving with the control function
+found that by accident...+
Thanks,
den
.
Similar Messages
-
Keyboard and trackpad are not working, Keyboard and trackpad are not working
I'm using MBP 15" late 2008 with Maverick OS. A couple of days ago, the internal keyboard and trackpad are not working at all. I did all the troubleshooting. I even reformat it; installing the snow leopard and re-installing the maverick but no good result. I believe there's no problem with my keyboard because i can still do PRAM on my lappy. Everytime i'm booting up my MBP, it always looking for bluetooth trackpad and keyboard. I have not used those bluetooth peripherals from day 1 i've started using MBP. I just read on the internet about the same problem has happened on MBP 13" retina and APPLE fixed it by updating the software. I wish Apple will also do something for the old MBP to fix the intermal keyboard and trackpad problem.
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own". -
My wireless keyboard and mouse do not work on my All-In-One computer?
Q.: My wireless keyboard and mouse do not work on my All-In-One computer?
A.: If your wireless keyboard and mouse do not work even after changing the batteries, please try re-syncing them by following these steps.
1. Make sure the computer is on, plug in the USB receiver. Push the button on the USB receiver until it flashes blue.
2. While the receiver is still flashing, press the red connect button on the keyboard (Make sure the batteries are installed). The USB receiver should stop flashing after pressing the button on the keyboard. It may take up to 8 seconds to sync.
3. Repeat the same process for the mouse. Push the button on the USB receiver, then press the connect button on the mouse (Make sure the mouse is on).
Note: This applies to all MSI All-In-One computers that include the ES500W wireless keyboard and SW130 mouse."This machine has an added 4 USB ports, could this be causing a problem?
It definitely could be the source of the problem. Perhaps the PCI card was bumped loose during shipping?
Have you tried removing the card? That's where I would start.
Keep us posted. -
I just got a new laptop and itunes is not working I have tryed to reinstall it and do alomst everything and it's still not working. Help?
What do you mean "not working"? That could mean multiple different things.
If help is desired, be as specific as possible. -
My macbook pro mid 2009 keyboard and trackpad is not working.
My macbook pro mid 2009 keyboard and trackpad is not working. it was working perfectly fine a week ago and it stopped. i tried using a external wireless mouse and keyboard but only the mouse will work!! They keyboard lights up when it is booting up but when i try to sign in, nothing types or the mouse wont work. i am fine if the mouse doesnt work because i can use an external one but can someone please help me?!
The best option is an appointment at an Apple store genius bar and have the technicians diagnose the problem.
Ciao. -
I buyed a new computer and photoshop was not working anymore, I reinstalled it but it does not accept my serial number@
What message do you get when you try to activate it?
-
Hi, my Hp Pavilion lap, keyboard and mouse is not working
Hi, my Hp Pavilion lap, keyboard and mouse is not working while i am login into windows 8.1. but it works in bois mode. can you please tell me the reason
Hi there,
I had the same problem so did some research. Downloaded this driver and now everything's sweet. Hope it works for you too!! (This is only to get your hdmi working, sorry can't help you with the rest)
http://www.nvidia.co.in/object/Quadro_3D_Vision_USBdriver_197.03_in.html -
Installed ios 6 on new iPad and siri will not work.
Good morning, I installed ios6 on the new iPad and siri will not work. Each time I try to use siri she says "uh oh, I'm having a problem. Please try again. I have tried turning siri off and back on again. Resetting the iPad, resetting the network, turning Airplane Mode off and on again. All to know avail. My iphone 5 works great and so does my wife's iphone 4s with ios6. I have called Apple support but there only suggestion was that the servers were busy. If that was the case my other devices would not work either. Plus the servers wouldn't be busy for four days. Any help anyone could provide would be greatly appreciated. I was looking forward to using siri on the new iPad and other folks don't seem to be having a problem.
Thanks, and have a great day.Then you need to change your device details as this still says iPad2.
It's very possible Apple's servers have been busy for 4 days as not everyone downloaded iOS 6 on the day it was announced. I downloaded it last Friday, myself, as an example.
There are a millions and millions of people using Apple iDevices.
Just because everything went fine with the iOS 6 updates of your iPhone 4 and 5 doesn't mean something couldn't have gone wrong with an update to your iPad3
If the iOS update missed something during the download, I am not sure how to go about re-downloading iOS 6 to fix the issue you are having. -
I have a windows computer running xp. I can not load the latest version of I tunes. I receive an error message that the 'msi" file can not be found. I can not delete I tunes for the same reason.
HELPItIt is the the ituens msi file
From: Apple Support Communities Updates
[email protected]
Sent: Monday, February 27, 2012 3:40 PM
To: escow 39
Subject: - Re: I want to install the latest version of
i tunes. I recieve an error that the MSI file is missing. It won't load the
new version and I can not delete the software either. HELP!
<http://images.apple.com/support/images/emails/apple_logo_gray.gif>
<https://discussions.apple.com/index.jspa> Apple Support Communities
Re: I want to install the latest version of i tunes. I recieve an error that
the MSI file is missing. It won't load the new version and I can not delete
the software either. HELP!
created by b noir <https://discussions.apple.com/people/b+noir> in iTunes
for Windows - View the full discussion
<https://discussions.apple.com/message/17708214?ac_cid=142432#17708214 -
I need help trying to put all my songs my new computer and it says Not on this computer i need help
i cant put the songs i purchased i just got a new laptop and it saying not on this computer i need help BAD!
THIS IS FROM ANOTHER POST.
PLEASE DON'T POST IN CAPS LOCK, AS IT IS SIMILAR TO
SCREAMING.
This sounds like your alarm is set. Go to
Extras-->Clocks and make sure that the alarms are
off. Make sure there are no alarms set for your
calendar either.
btabz
THANKS I WILL CHECK THAT OUT. AND IF YOU THINK THAT USING CAPS IS SCREAMING, THEN YOU GOT QUIRKS! EVER THINK THAT I USE CAPS FOR MY POOR VISION? I HAVE TO USE A MAGNIFYING GLASS FOR MY I POD. IT'S NOT ABOUT SCREAMING ALL THE TIME
MAYBE I SHOULD HAVE SAID APPLE AND NOT I POD. BUT I WENT BACK TO THE "Technical Specifications" AND YOUR RIGHT AVI IS NOT THERE. SORRY I THOUGHT IT WAS, I GUESS I AM **** OUT OF LUCK. WELL AT LEAST I GOT MY I POD NOT TO TURN BY ITS SELF, THANKS ANYWAY. -
I had to return my first IPad2, and now the new one won't connect to iTunes. I verified I had the latest version, used the new cable and verified the port worked by syncing with my iPod, I reloaded 10.2.2 and restarted my PC. Still won't work - thoughts?
Sorry - found a couple of good threads right after posting.
-
This message comes up on the screen:
Unable to connect.
Firefox can't establish a connection to the server at www.google.com.
The site could be temporarily unavailable or too busy. Try again in a few
moments.
If you are unable to load any pages, check your computer's network
connection.
If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web.
I have tried restarting the computer and that did not work. I have checked access and it should be ok.
Please let me know how to fix the problem.hello rotary, please see [[Fix problems connecting to websites after updating Firefox]]
-
plz help me by mail me on [email protected]
the previos owner id and password also not work there what i do all do everything downdrade , upgrade but everytime ask for previous id and password...........i also erase find my phone from previous user id
-
All non-Apple apps will not open on my phone. I restored as a new phone and still will not work
Hello there, KScotty.
The following Knowledge Base article offers up some great steps for troubleshooting apps installed on your iOS device:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
How do I activate Acrobat XPro- I've installed CS6 Premium on my computer and Acrobat does not work and says its not activated. It is listed on the programs on the computer but will not respond. How do I fix this?????? Help Adobe?????
Hi t0m#2410,
How did you install Acrobat, did you install it as a part of Suite installation.
If it is a part of suite then deactivate suite uninstall Acrobat, Reinstall Acrobat using Suite media. Launch Photoshop first and Activate.
Then try launch Acrobat.
Regards,
Ajlan Huda.
Maybe you are looking for
-
Any way to get an estimated shipping date?
Is there a way to get an estimated shipping date? I have my original November 4th in my email but there is people ordering the same phone as me and getting them a lot sooner (And they ordered after me, online) I placed my order on September 16th if t
-
Ever since I updated firefox to 3.5.16 java ahs stopped working. Drop down menu's in ebay don't, windows from links (such as tracking in ebay) don't work, pogo game windows won't load or will load the widow frame but not the game itself. I work onlin
-
Quantity Total Stock is incorrect in the report
0TOTALSTCK (Quantity Total Stock) is a non-cumulative key figure in the standard cube 0IC_C03 (Material Movements). The user is running a report for September month (01.09.2008 to 30.09.2008). At the end of the month i.e., 30.09.2008 the total stock
-
ICM_HTTP_CONNECTION_FAILED and Web Services
Hello Experts, I am consuming web services from ABAP program. For that i have created proxy object using SE80. Proxy is created successfully but while testing i got following error. "return code 400,message "ICM_HTTP_CONNECTION_FAILED"" I have search
-
Complex VO as AdvancedDataGrid dataProvider
I would like to access fields in a complex VO from my AdvancedDataGrid. By 'complex' I mean - that my AdvancedDataGrid dataProvider point to VO of type 'A' which containes (besides properties) VO of type 'B'. I would like that part of my colums will