New keybord selection
Ya'll always have the answer, thanks ! Here is a another I hope you can help me with, is the cord on the stock Apple keyboard short or not ? Said differently I'll need a new wired keyboard for my upcoming mini (have a mouse for it) and so far the Apple keyboard is a winner in my book cause its 100 % compatible and has two USB ports (cable length) ? (the fact that its only $ 29.00 doesn't hurt either) am I being silly cause there are better keyboards out there ?
(if session time out just a link 2 wired apple keyboard)
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/71808/wo/yU2XLeZ Xfgpk25QzzVn8IZOqOLj/1.0.0.15.1.0.6.9.9.17.0.1.0.1.1.1.1.0.3
On all my Apple keyboards with a fixed cable, they are 1 meter in length. I don't have the current one yet, but it's probably the same. An extension cable should not cost more than about 3 bucks.
Links to the Apple Store are personalized to your Apple ID. It's better not to post them here.
Read this article by Doug, on how to make working links to the Store:
Douglas McLaughlin, "How do I make a link to an online Apple store item?", 08:49pm Aug 11, 2005 CDT
Similar Messages
-
You should run a new contract selection for item 0000000010
Hello Friends
i am trying to create a service request from WEB IC by confirming Account and Ibase and able to create without error.
if i end session and open the service request in change mode and if delete the ibase and save, then appeas the below message
"You should run a new contract selection for item 0000000010", going through OSS notes, but found nothing.
Transaction type ZXXX : we set
Contract Determination is set to 'E' : Assign at Item leve : Assign immediately if unique for .
if i open the service ticket in CRMD_ORDER and go in change mode if i click process action button next to error, this will disappear. but it comes when i assing a ibase to the request, so its working only when i first create without errors.
users do not use crmd_order to process error and WEB CI does not have process action feature.
any sort of help will be appreciated.
Thanks
GopiHi Gopi,
Which release are you using ?
This message appears when you change any field in the service ticket which has an influence on contract determination, such as ibase, ibase component, line item, ...
As of CRM2007 we have enabled a hyperlink for this message. Clicking the hyperlink will re-execute the contract selection.
Regards
Gert -
V.15 and New Data Selection
Hi,
in V.15 transaction the "New data selection" is greyed out. How can i allow the user to check/uncheck this box?
The problem is when the "New data selection" is checked and when i execute the transaction, the "Name of sold-to party" is empty but when it's unchecked it's filled ... strange. What is the "New data selection" means?
Thank you for your replies.if you do not select "new data selection" the program with just import previously selected data (the data from previous run which was stored - it's done by selecting "save dataset").
"New data selection" means the data is selected from database tables again instead of importing previously selected dataset from storage.
I believe if you at least once SAVE dataset - the option "new data selection" will be editable, SAP just saves datasets per user, so if user have not saved any dataset - the only option is to run with "new data selection" = 'ON' . -
Just updated my photoshop cc and wanted to try out the new focus selection tool but it's not there. Why isn't it there?
Use menu Help>About Photoshop make you have started CC 2014 and have not started CC... Its in menu Select under Color range
-
Excute_query when new date selected from calender
hi,
i have a mater detail form. form is displaying current day values as default.
i put a calendar to form for users can be select date.
now,
i want to excute_query when new date selected from calender.
i writed below code to text_item(calendar) when_validate_item trigger but it nor woring
.giving frm-40137 error.
code is;
:parameter.GUNLUK_TARIH := Name_In('PARAMATRELER.TARIH_SON');
SET_RECORD_PROPERTY(1,'XXMOB_YAPBOZ_TAHTASI_GV',STATUS,QUERY_STATUS);
go_block('XXMOB_YAPBOZ_TAHTASI_GV');
DO_KEY('Execute_query');
any help please
best regards
aykutI was thinking your date selected from CALENDAR ended in a list_item.
I don't know I thinking that
well,
:master_block.itemdate is your text_item where calendar return date selected.
and then , following Gerd's step
Create a WHEN-MOUSE-DOUBLECLICK on the date-item of CALENDAR and write :
begin
:master_block.itemdate := calendar (.........);
go_block ('master-block');
execute_query;
end;
or set a global or parameter variable date selected from calendar :parameter. xxxxxx
in a PRE-QUERY
:master_block.itemdate := :parameter. xxxxxx
and
Create a WHEN-MOUSE-DOUBLECLICK on the date-item of CALENDAR and write :
begin
:parameter. xxxxxx := calendar( ....);
go_block ('master-block');
execute_query;
end;
regards -
[JPA] SELECT NEW inside SELECT NEW in Named Query
Suppose i have two JPA entities Master and Detail as follows:
@Entity
public class Master implements Serializable{
private static final long serialVersionUID = 1L;
private long id;
private String masterField1;
private String masterField2;
private String masterField3;
private String masterField4;
private String masterField5;
//A lot of other fields till masterFieldn...
private String masterFieldn;
private List<Detail> detailList;
//getters and setters here...
@OneToMany(mappedBy = "master", cascade = { CascadeType.ALL }, fetch=FetchType.EAGER)
@OrderBy("detailField1 DESC")
public List<Detail> getDetailList() {
return detailList;
@Entity
public class Detail implements Serializable{
private static final long serialVersionUID = 1L;
private long id;
private String detailField1;
private String detailField2;
private String detailField3;
private String detailField4;
private String detailField5;
//A lot of other fields till detailFieldn...
private String detailFieldn;
private Master master;
//getters and setters here...
@ManyToOne
@JoinColumn(name="MASTER_ID", referencedColumnName="ID") public Master getMaster() {
return master;
}Both Master and Detail entities have a lot of fields, but i only need a subset of those fields when these entities are queried. So, i have two helper classes which i use in named queries in Master JPA entity :
@NamedQueries({
@NamedQuery(name = "Master.findMaster",
query = "SELECT NEW MasterHelper(" +
"t.masterField1, t.masterField2, t.masterField3, " +
" SELECT NEW DetailHelper(" +
"td.detailField1, td.detailField2, td.detailField3 FROM Detail td WHERE " +
" td.master.id = t.id)) FROM Master t WHERE t.id = ?1")MasterHelper and DetailHelper have only the fields i want to query, getters and setters, and a constructor matching the SELECT NEW.. in @NamedQuery :
public class MasterHelper implements java.io.Serializable {
private String field1;
private String field2;
private String field3;
private <DetailHelper> detailList;
//Constructor matching SELECT NEW
public MasterHelper(String field1, String field2, String Field3, List detailList) {
this.field1 = field1;
this.field2 = field2;
this.field3 = field3;
this.detailList = detailList;
//getters and setters
public class DetailHelper implements java.io.Serializable {
private String field1;
private String field2;
private String field3;
//Constructor matching SELECT NEW
public DetailHelper(String field1, String field2, String Field3) {
this.field1 = field1;
this.field2 = field2;
this.field3 = field3;
//getters and setters
}So, basically when i query for a particular Master entity, what i want in return is a List of MasterHelper objects with just the fields i want; each MasterHelper object must include a list of MasterDetail objects, again with just the fields i want.
When the above named query is executed by Toplink Essentials against an Oracle database, i get the following exception regarding the "second" SELECT NEW:
EJBQLException
Exception Description: Syntax error parsing the query [SELECT NEW
...unexpected token [SELECT]
...How can i achieve what i want? Doesn't JPA allows SELECT NEW inside SELECT NEW in named queries?
Thanks in advance for any help.
Edited by: savas_karabuz on May 16, 2008 3:59 AM
Edited by: savas_karabuz on May 16, 2008 4:02 AMHello,
The build you are using is an older one, and there have been a few enhancements done for constructor expressions support (for instance
https://glassfish.dev.java.net/issues/show_bug.cgi?id=1421)
but an enhancement to allow constant values is still open: https://glassfish.dev.java.net/issues/show_bug.cgi?id=2452
Best Regards,
Chris -
when I type symbol font appears on screen (Safari, Mail, Firefox text boxes) and browswers fail to work properly (click on reply and browser tries to download), reboot will temp fixe, new keybord fixed it but it now back? driving me crazy..virus??? When this starts up iMac does not work properly, odd things, start happening, like all my screens will dissappear and I have to click on app to 'show' then as quick as it started it will stop. Run MacPilot/Onyx, no change.
Wireless keyborad, 27" i7 chipset, 2.8 Ghz,12 Gigs RAMwhen I type symbol font appears on screen (Safari, Mail, Firefox text boxes) and browswers fail to work properly (click on reply and browser tries to download), reboot will temp fixe, new keybord fixed it but it now back? driving me crazy..virus??? When this starts up iMac does not work properly, odd things, start happening, like all my screens will dissappear and I have to click on app to 'show' then as quick as it started it will stop. Run MacPilot/Onyx, no change.
Wireless keyborad, 27" i7 chipset, 2.8 Ghz,12 Gigs RAM -
New development - selection screen
Hi gurus,
we are introducing a new functionality via devolopment transaction Z, and we need to enter a selection screen prior to the results, just to enter a kind of filter for fields such us:
1. Purchasing document creation date.
2. Document type.
3. Purchasing group.
4. Vendor.
5. Cost Center.
The programmers are asking us whether we want those fields to be a parameter or a range.
Can anyone clear the difference between those two terms for us?
Any help regarding this issue would be very appreciated.
Thanks,
VMLIn selection screen Parameter is Just one value For ex Cost centre A .If it is range means From Cost centre A to Cost Centre E. (A,B...E).
If you maintain for all these filed Range then it may give dump while report execution.So you have to controle which fileds should have range and Just one parametre. -
HT1329 Create New Version selection grayed out, what is wrong?
I have adjusted the preferences to MP3 but when I select a specific song to create a new version, the options are grayed out. What else do I need to do in order to convert my previously purchased songs to MP3 so that I can play in my car.
Where is the song you are trying to convert located? Is it of kind Protected AAC?
tt2 -
Need to preserve /home - confused by new filesystem selection process
I am in a bind here. My Thinkpad just took a dump and I really don't have a way to do a good backup. I will not freak out if I lose what's on it, but I would really rather not. Anyway, I have a good partition scheme already, so I don't need to set that up. The new section to select the FS and mount points is confusing me. By default, they are all saying RAW/No filesystem. When I select a partition, there are options for filesystems, but no option to leave it alone. What do I need to do to preserve the two partitions that I want left alone, but still have their mount points specified?
Edit: for example, I have an NTFS partition. next to the partition it says raw-> no_fs. If I select it, I am asked if I want to recreate it. No matter what I select I am put into a screen to select a fs, and ntfs is not listed. If I choose nothing, will it be erased and made into a raw partition? This new system is very confusing, I think I liked the old one better! Oh well. Adapt and overcome! Any help would be appreciated!
Thanks very much
JTS
Last edited by jimmy the saint (2009-09-05 06:02:05)jimmy the saint wrote:I am in a bind here. My Thinkpad just took a dump and I really don't have a way to do a good backup. I will not freak out if I lose what's on it, but I would really rather not. Anyway, I have a good partition scheme already, so I don't need to set that up. The new section to select the FS and mount points is confusing me. By default, they are all saying RAW/No filesystem.
The "raw/no filesystem" things isn't the most clear way to phrase it (I should probably improve that, please file a feature request), but basically it means the installer won't do anything on them.
jimmy the saint wrote:Edit: for example, I have an NTFS partition. next to the partition it says raw-> no_fs. If I select it, I am asked if I want to recreate it. No matter what I select I am put into a screen to select a fs, and ntfs is not listed. If I choose nothing, will it be erased and made into a raw partition?
If you selected "yes" on "recreate?" it should ask something like "which FS do you want this to be?" and otherwise it will ask "which FS is this?" (subtle difference).
If you said "no" on the recreate question, it will not erase/overwrite the filesystem.
the fact that ntfs is not listed is probably a bug (file a bug for this).
for now, you can get around it like so:
in /usr/lib/aif/core/libs/lib-ui-interactive.sh, on line 431 (just below the block of lines that are like '[ $part_type = .... FSOPTS= ..') put this:
FSOPTS="$FSOPTS ntfs NTFS"
If you then restart the installer, it will allow you to choose ntfs as well.
jimmy the saint wrote:This new system is very confusing, I think I liked the old one better! Oh well. Adapt and overcome! Any help would be appreciated!
Thanks very much
The new one is much better, but there are some details in special cases like this that need to improved. let's work at this together to improve this (you file feature requests and bugreports, I help you and change the code where needed, you tell me if it works) -
Cannot add new printer, selection grayed out
I have been using a brother MFC-9420CN. I have been sharing this printer with a windows computer over a wireless network. It has worked flawlessly since I hooked it up. After the last 10.4.6 update for the OS the printer no longer works. I first noticed it when I selected print from a menu. The top selection said the printer name but there was a grayed question mark next to it. I opened the printer utility. The printer was there but would not work. So I removed it from the list and went to add it once again. When I clicked on add a new menu popped up. The menu searched for new drivers and then stopped. On the bottom of the menu is three selections. One for name, one for location and one for print using. They are all grayed out. Because there is no selection in the above menu for me to choose. I tried deleting all the brother print drivers in /library/printer/brother folder. Then I reinstalled. Same problem. I cannot selet a printer now. I also tried hooking it up diretly and nothing happened. I then tried the IP printer selection. At the bottom there is a print using selection. It shows the brother cups driver but when selected and then I choose to add it a message comes up that says "An error occured while trying to add the selected printer error code 50" The printer still works over the wirless connection on the windows computer. Thanks for any help...
mac mini Mac OS X (10.4.6) 1 gig RamI found a work around for this matter. Most of the time, I use spotlight to remove anything on the hard drive that has anything to do with "Brother Printers" Then I reload the CD that came with the printer and it works ok. Every now and again if I cancel the print job on the printer the computer will do this hiccup and say there is no printer. This is my work around.
-
SetCurrentRow does not set the right class on the new row selected
This has to do with using setCurrentRow and having
spry:select used on the active row to enable selection
highlighting.
When setting the current row programmatically by invoking
setCurrentRow, the row get seccessfully set, but the class is not
set to reflect that current row
Any idea why the class of the selected row is not changing
when I am calling setCurrentRow (works great when there is a mouse
click)?Hi,
The spry:select is a shortcut attribute that only works
onclick.
Check out:
http://labs.adobe.com/technologies/spry/samples/data_region/SetCurrentRowByValueSample.htm l
and
http://labs.adobe.com/technologies/spry/samples/data_region/SetCurrentRowSample.html
Thanks,
Don -
How do I import a fabric swatch to add to my swatch selection. I want to change the fabric on an ottoman.
Go to "Edit Menu>Preset Manager>Color Swatches" and choose "LOAD" . Navigate to the color swatches file . The color swatches will get loaded in PSE . Please note that if you are using PSE 11 there will be a "ADD" button and not a "LOAD" button. To permanently save the swatches , so that you can access it to it even after a relaunch , choose "Save swatches" and save it in the user preset folder location.
-
When saving new bookmarks selecting chooose does not show any files
in firefox 3.6.6 when saving new bookmarks the choose option does not show any files.
have tried disabling extensions but no effectTry http://kb.mozillazine.org/Locked_or_damaged_places.sqlite
-
My Ipad and iphone open an old xls document instead of the new one selected
Both my iPhone and pad will not let me open a new xls attachment. They both open an old one that I first opened when I got my iPhone. Any help would be greatly appreciated
Eric Kraft wrote:
HOWEVER, if you modified a document in 5.0, 4.3 can't open it. You'll have to use Time Machine to replace the modified version with an earlier version that was last modified in 4.3.
Actually there is a workaround.
If you open the file in Pages 5, it can then be exported on Pages 0.9 format to another folder. I had to do this as the document was only in iCloud and couldn't be recoverd by Time Machine.
Worked for me!
Maybe you are looking for
-
Can anyone help with this question?
-
Gestures no longer work in iTunes 10.4 (80)
Can you folks confirm the following please? In previous vesions of iTunes I could go back and forth by simply swiping 2 fingers similar to navigating in Safari. With Lion back/forth is done with 1 finger alas iTunes does not respond to 1 or 2 fingers
-
It's the Mac book air good for graphic design and video editing ?
I'm into graphic design for clothing logos etc. and I'm a photographer my question is, is the Mac book air good for these things?
-
CONDITION BASE VALUE / ALT CALCULATION TYPE Pricing
Dear All, I have a scenario where in I want the condition base value for calculating the value for a condition type to be based on Gross weight - Net weight value of a material. Is it possible and if yse how do I acheive the same. Deepak
-
I need help on Spring web flow Integation with JSF in Weblogic Portal 10.3
Hi I am using JSF1.2(portlet) with weblogic portal 10.3 I am trying to integrate JSF with Spring web flow... I went through JSF white paper(weblogic-portal-jsf-whitepaper.pdf) ...there it is saying that ..as navigation controller, we can use spring w