New Label Printing - Hazard Pictograms

Dear SAP Team,
Has anyone ever implemented the new GHS regulation that replaces old Hazard pictograms by the new ones?
There are 10 new diamond labels pictures that need to be printed in accordance with the type of substance.
Physical hazard, environmental hazard, health hazard.
Scenario:
SAP MM is linked to MSDS system to capture the data to be printed in labels.
My question is:
What are the resources required to have the new diamond labels printed ?
What type of ABAP/BASIS work is necessary to have the new pictures picked up at the moment of printing?
any help is welcome
Regards
Roger

Hi,
The steps are described in SAP Notes #135894 and #.
The main problem with label printers is that all these printers have their own unique printer languages which are not supported by the SAP system. So Note #183777 and #135894 describe a workaround.
All print data including all printer sequences are created by an external program and uploaded into the R/3 system. As per Note #183777, this is done with Intermec's design program LabelShop PRO.
You should use device type LB_INT to print the barcode labels. The SAP system only replaces the symbols and besides that it sends the print data to the printer which was uploaded.
So you need to design the label with LabelShop PRO or another third party program for Intermec label printers. You then need to upload the label file to a standard text in transaction SO10 as described in the Notes above.
Regards,
Aidan

Similar Messages

  • Intermec Strengthens Printer Portfolio with New Mid-Range Label Printer

    Last Thursday, we were excited to announce the PM23c, a new 2”mid-range industrial printing solution and an extension of Intermec’s PM43 and PM43c printers.
    Launching at the "Future Technology Experience" show in Las Vegas, the PM23c is an all-metal barcode label printer primed for mission critical markets and applications such as airline passenger services, manufacturing, and retail, including product labeling and food traceability, where maximizing productivity drives results.
    Read on for more.

    I like my Canon Pixma MX850. It is a network all-in-one, so it will work with any router, and it scans through the network as well as prints. The only slight hitch in setup is that it needs an initial USB connection to set up the network connection, but there has been no problems since then. I prefer a network printer to a USB printer, because it is made to work natively with a network connection, and you do not need to worry about compatibility with the print server, such as the one built into the Airport Express.
    The only problem with it is that the price keeps going down since I bought it! However, you can save yourself a lot of grief if you stop shopping after you buy something.

  • I need to find where I can download CD label print. I just got a new computer.

    I just bought a new computer and have used CD Label print for years but I can't find it on the Canon website. I could go to some of those 3rd party sites, but they just load you down with stuff I don't want. I need to find out where I can download it. Thanks.

    Hi Macma,
    The Easy-PhotoPrint EX program that comes with the printer can be downloaded from the Canon USA website and assist you with printing CD labels.  Please click here to go to the Drivers and Software page for your PIXMA MG5420.  Once on the initial download page for your model, please do the following:
    1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
    2. Next, please click on the red arrow next to the "SOFTWARE" section and click the EASY-PHOTOPRINT EX file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
    This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • How can I create a new label using Pages and Avery Labels products?

    How can I create a new label using Avery LAbels and PAges on an imac?

    Contacts prints to Avery labels.
    Otherwise just open the appropriate Word template from Avery's website, in Pages.
    Peter

  • How can I create a new label?

    Please, I would like to know how can I create a new label in Bridge?

    Contacts prints to Avery labels.
    Otherwise just open the appropriate Word template from Avery's website, in Pages.
    Peter

  • Primera LX 400 Label Printer No Longer Working with Mountain Lion

    Hi-
    I upgraded my OS to Mountain Lion and most everything works OK except my Primera LX400 label printer. The error message I get when trying to install the driver is "Software for this printer isn't available from Apple. Contact the printer's manufacturer for the latest software."
    I contacted Primera but I haven't received an answer yet. Anyone else solve this problem with Mountain Lion and Primera Printers?
    For those that depend on the Primera printers, you might want to wait before upgrading.

    For those with the same problem, Primera says they will have new drivers up 7/31/12:
    http://www.primera.com/primera_printer_drivers.html
    I decided to check a day early (7/30/12) and the driver for my LX400 is up and I was able to install and use it successfully.

  • Help with Zebra Label Printer and Multi Order Shipping Tool- Partial Label Printing

    I have a zebra gx420d which is compatible the zebra 2844 (its the new model) and I am having a hard time printing labels with the multi order shipping tool. I have the correct driver, the printer test page works fine, and everything is configured for a 4x6 label.
    I have set the selling preferences in paypal to match the zebra 2844 printer and within the mult order tool, I have edited the settings to also match zebra 2844.
    My problem is that regardless of what or how I do it, my printer will only print a 1/4 of the label. It is not shrinking the label, it is starting to print at the correct size but stops 1/4 of the way through. Almost like it thinks my label size is too small but as i mentioned, I confirmed 4x6 on the label settings at both printer properties and printer preferences. I spent and hour on tech support with zebra and they confirmed the printer is working as it is supposed to. I also know this because my Amazon labels print correctly as well. Its only paypal and ebay labels that are not working. Very frustrating.  Can anyone help?

    Hi,
    did you upload the desgin in a standard text with option ITF? This you can copy then to the layoutset. At least this is the way of working with BARONE.
    Cheers,
    Stefan

  • Cannot Print to CUPS Printer, UPS Label Printer

    After upgrading to Mavericks, I can no longer print to my UPS Label Printer which utilizes the CUPS drivers. I have tried deleting the printer and reinstalling it. No luck. All other printers are working fine. Any ideas?

    This is all about the driver!
    Canon doesn't provide drivers that will work for a Windows-shared printer. You have to use a CUPS driver for that.
    Your model isn't directly supported by Gutenprint (CUPS drivers included by Apple in OS X), but the newer Gutenprint has iP4500 and several models "close" to yours:
    http://www.linuxfoundation.org/en/OpenPrinting/macosx
    Experiment with a couple Gutenprint models.

  • Problem printing horizontal text in smartform with zebra Z6M label printer

    hello,
    The situation is this:
    There is a Z smartform wich prints a label to a zebra Z6M label printer with the text and barcodes vertically.
    The form have a command in the main windows with the parameter: S_LZPL_SETUP     '^FWR'
    This label works fine, but the client want to change the form, they have told me to create a new smartform and print the info horizontally, using the same printer.
    The tests i have done are the following:
    create a smartform from ground and write a template text and a barcode with a new font of system barcodes. the bardoce is shown ok(it is shown horizontally), the problem is that the template text is shown vertically, as in the original smartform.
    then i tried on another zebra ZM600 label printer, similar model, but not the same, and the smartform printed was ok (text and barcodes shown horizontally). So i think is a configuration setting problem, but i dont know where to search.
    i have checked the label printer parameters in SPAD, but didnt find anything souspicios.
    have you any idea?
    thanks in advance.

    See these if they be of any help.....
    BARCODE:
    goto smartform styles-> create a style-->
    create a character format.
    under standard settings give the bar code name
    use this style in ur smartform. select the data field which u want to barcode print and assign the character format
    Similarly
    SAPSCRIPT
    open the form and click the character format button and
    repeat the step as above....
    http://help.sap.com/saphelp_nw04/helpdata/en/68/4a0d5b74110d44b1b88d9b6aa1315b/frameset.htm
    Go to Character formate in your form.
    create a new char formate with enable BAR code AND
    you can give its type too.
    To Create a Bar code prefix:
    1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
    2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
    Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
    The place where you are using the field value use like this
    <C1> &itab-field& </C1>.
    You will get the field value in the form of barcode.
    Which barcode printer are you using ? Can you download this file and see.
    http://www.servopack.de/Files/HB/ZPLcommands.pdf.
    It will give an idea about barcode commands.
    Check this link:
    http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
    Check this link:
    http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
    Hope this link ll be useful..
    http://help.sap.com/saphelp_nw04/helpdata/en/66/1b45c136639542a83663072a74a21c/content.htm
    go through these links and cose u r previous threads,
    http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
    smartform - barcode
    http://www.erpgenie.com/abap/smartforms.htm
    http://sap.ittoolbox.com/groups/technical-functional/sap-basis/print-barcode-with-smartform-634396
    http://sap.ittoolbox.com/groups/technical-functional/sap-dev/printing-barcode-733550
    Detailed information about SAP Barcodes
    A barcode solution consists of the following:
    a barcode printer
    a barcode reader
    a mobile data collection application/program
    A barcode label is a special symbology to represent human readable information such as a material number or batch number
    in machine readable format.
    There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
    You can print barcodes from SAP by modifying an existing output form.
    Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
    Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
    Creating Bar code:
    ) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
    2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
    Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
    The place where you are using the field value use like this
    <C1> &itab-field& </C1>.
    You will get the field value in the form of barcode.
    Check this thread for detail information.
    How to print Barcode in te SAP SCRIPTS?

  • Labels printed in Dot Matrix Printer

    Hi Experts,
        I am new to the label creation.
    I need to create a new label which will be printed using a Epson Dot matrix printer.
    I got an idea how to do it in zebra printing. But still I am wondering how it can be done for a dot matrix.
    Whether it is same like zebra programming or dot matrix do have some other coding language to display the label?
    Could you please explain me on this?
    Thanks & Regards,
    Arun.

    hi,
    there is a huge difference between a standard dot matrix printer and a zebra printer.
    a zebra printer mworks with ZPL II commands. All other printer works otherwise.
    However. If you use smartforms the code in the smartform is converted to ZPL|| automatically. ( I think you can see it in the spool but i am not sure)
    If you use sapscript you have to code the ZPLII yourself.
    On an other printer you can work with normal commands. You have only to take care that the printer has a porper driver. Ad fthe form has the proper pagelayout.
    This will do.
    Gr., Frank

  • Problem in continuous Material Label Printing

    Hi Experts,
              I am using SAP Script for Material Label Printing and Dot-matirx printer for printing.
              There are 6 labels getting printed on a Page. There is no problem in printing but what happens,
              whenever there is a new material getting printed, it skips the current page and resumes the
              printing from new page.
              Example. there are 8 labels for a Material-1 and 3 labels for Material-2. 6 labels for
              Material-1 would print on 1st Page, the rest 2 would print on 2nd page. Now the 3 remaining
              labels for Material-2 are getting printed on 3rd page which should get printed on 2nd Page itself
              as there is space for 4 more labels on 2nd page.
              Please help me out on this.
    Regards,
    Ravi.

    Hi ,
    every material there will be started an new sapscript (probably)
    You will have to change your program that way that all materials and belonging data comes into 1 internal tab.
    If you print this tab in 1 big loop (instead of a nested loop for everymaterial) everything will go fine.
    Sucees,  Gr., Frank

  • Custom Label Printing - Print position creeps up and across labels

    Hello
    I am using VS 2010 and have updated to SP4 for Crystal Reports
    I used the custom size option to make a label report. The built in options for label sheets do not match the labels that I have
    I made a label report for 3 columns and 8 rows using the label size, margin widths top and bottom, left and right, with the 2 widths between the columns. But this does not print correctly on the labels. The printing on the label rows creep up so by the time you reach the 8th row the label is partly on the 7th Row. The left hand column prints correctly. the middle column prints closer to the left edge of the label than in the first column and the third column is printing on the gap between the 2nd and 3rd column.
    I tried making a new report and set the dimensions to the maximum sizes that would allow 24 labels (3 columns and 8 rows) but the same problem occurs as when having set the correct sizes
    I am not sure if there is a method to edit the label sizes, and margin widths as happens when creating a new report or if the only option is to create a new report.
    Any assistance or information on how to make the labels print with the correct row and column spacing would be appreciated.
    My Labels are 67mm x 36mm. there is no space betwwen the rows, the margin at the top and bottom of the sheet are the same, and the left and right margins are the same. The space between the columns is 2mm

    Thank you for the reply Rob
    There is no Avery template in the list that has 24 labels, which is why I was using the Custom Label
    I have tried many variations trying different widths and gaps between the labels, but in all cases by the time the 8th row is printeed the printing has crept up and is now overlapping onto the bottom of the 7th row label. The third column is printing on the gutter between the 2nd and 3rd column.
    When creating a Custom label it would appear that the Wizard works on Letter size Paper regardless of the paper size that the printer is set to. All my printers are set to A4 size paper.
    Letter Paper is 215.9mm x 279.4mm compared to 210mm x 297mm for A4. While the width is not a problem the length is less, and that may well be what is causing the problem when the Wizard creates the labels, despite changing the Paper size to A4. But the paper size can only be changed and set to A4 after the wizard has been given the label size and spacing for margins and gutters.
    In my view the Wizard should ask for the paper size and then ask for the label size settings and layout
    Regards
    David

  • Label printing issue with chinese characters (SAP script)

    Hi ,
    I have a requirement to print chinese characters on label print out.
    Here are the steps already tried:
    1) Created a new device type which is copy if ASCIIPRI and character set 8400
    2) Font ANDALE_S, CNHEI, CNSONG are assigned to device type, same fonts called in SAP script.
    3) During the print, it is picking ANDALE_S font(observed in spool RAW data), but preview is good.
    4) I put ZPL codes CW1,B:MSUNG.FNTFS in beginning of script and also ^A@N,50,50,B:MSUNG.FNT while prining actual chinese text in SAP script.
    5) also tried other device types assigned to printer LZEBU2, LB_ZEB2 etc.,
    6) already checked at printer DIMM level, SIMSUN, ANDALE_S fonts are already installed
    7) Character set on printer is same as in SAP
    So far no option worked, it default to Courier fonts while printing and it results garbage characters.
    If anyone has ideas, please advice.
    thank you,
    Anil

    Hi,,
    If the ZPL commands are correct for switching to the printer's internal CHinese font and character set, it may work to add the fonts via SE73 -> Printer Fonts -> ASCIIPRI . In here you need to add the commands in the print control SFxxx for your created font.
    Another possibility is to print via windows and device type CNSAPWIN. Here it should not be necessary to add any font.
    Regards,
    Aidan

  • How to connect Java into BarTender Label Printing Software

    Hi,
    I have one problem, my company have bartender label printing software 32 bit version, previously they use VB6 for controlling the dublicate printing of lable,but the software is gone. Now i want to do this in Java, but i don't know how to connect java into Bartender software.
    my company using old version, it accept only VB6. My Boss said can buy new Bartender Software but i don't know how to link and control dublicate printing. if anybody knows this connection between Bartender and Java please help me.
    if bartender New version support this features please send the link and example source code please help me.
    AnbuAathi

    Hi , i have the similar task ,where i need to connect my web portal application with the bartender software .I did a hugh R&D to integrate Java application with Bartender software but did not find any luck .So i request to provide the needed help to integrate my Java Application with Bartender software .
    Thanks in Advance
    Mohan

  • Label printing issues in Sapscript

    We are struggling with building a new label for a finished good.  On previous labels we used barcode BC_CD39.  This new label requires a mix of same barcode and 2D barcode.  One of the issues is BC_CD39 is it is too big at 13mm.  So we want to use CD39__00 which is 5mm.  We have gone into SPAD and SE73 and we think we have this set up to work on the two printers involved.  We have also followed instructions for 2D in 197177 for adding new small font.  We also have a logo for printing.  When I print the printout does not have the smaller barcode, any text in smaller font and the logo is missing.  I went into the spooler yesterday and these prints are getting an error (unknown print control     should be output) that is talked about in note 17559.   And when I look at the print preview I have a logo and different size fonts and smaller barcodes showing- basically all the stuff that is missing from the actual print.  Has anyone else run into this and how have you resolved this?  I am not sure what the spooler does not like. We are using a Printronix T5000e series printer.
    The spooler error reads: character converter active when first problem occurred
    Data was saved with character set 1100
    Data will be converted to character set 9010 (synt = 9010) 
    and then it gives the OTF error mentioned above.
    Our latest attempt is downloading tru fonts and getting them into the printer.  Still no success and now the labels are not even printing.
    Thanks for any help.
    Susan

    We continue with not being able to print this label correctly.  If I do a screen shot I can see I have varying fonts on the label.  But it completely ignores the various fonts on printing.
    Our pirnter is a Printronix label printer.
    My form is defined as landscape.
    I get a spool error when printing that character set 1100 is being converted to character set 9010, which is custom for Printronix.
    If we print on legal form vs the label form it prints fine.
    We have tried different print drivers but nothng seems to get these fonts out.
    We are using 5MM 3by9 barcodes.
    This product is about to 'go live' and we really want to print this from SAP vs an external label software program.  If we use an external label program separate from SAP it can print perfectly on same label printer.
    We welcome any suggestions.
    Susan

Maybe you are looking for