New Laserjet 2015 toner LIFE??

i just got a laser 2015 printer
i am able to get only 20-25 good quality prints from this and the toner seems finished, i took it to dealer who confirmed that ink is almost finished.
i asked him to replace the unit, which he, did but the same issue comes again................... there in NO ink in the cartage.
can u ppl plz confirm how much prints this printer can print with supplied cartage?

http://www.hp.com/pageyield/us/en/P2015/index.html lists the standard cartridge at 3000 pages, and 7000 pages for the HP LaserJet Q7553X Black Print Cartridge(53X).
Regards,
Bob Headrick, MS MVP Printing/Imaging
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

LaserJet 2015 prints black boxes instead of PDF

We have four LaserJet 2015 printers that are being served by a Windows 2003 server on a network. In one application we enter data into a web based application for an outside vendor. That vendor then "packages" the data into a pdf and sends it back to our printers to be printed. From time to time one of these pages will print large black rectangles instead of the usual data. This seems to happen randomly on each printer.
Two of the printers have the latest firmware updates and all printers are using the latest drivers. We've tried the 5e and the 6 PCL drivers but that makes no difference. The version of the firmware also seems to play no role.
We can actually look at the emf files coming back to the server and they look fine so our vendor says "it's a driver issue."
Has anyone else encountered this sort of problem? The searches I've done on the web and in the knowledge bases don't yield much information.
Thanks for the help!
--Danny

Hi
I don't know if u can't find out a solution.
All device output (printers) having the same divice type have the same behavior, i.e. printers having a different device type can give a different output, so if u'll correct the problem for a certain group of printers u could have a new problem for other group.
I think the best soltion is to use the printer used to test the smartforms
Max

Brand new laserjet pro 400 only prints about 1" down the left side of the page

I just unboxed a brand new Laserjet Pro 400 for a teacher, and upon running a test print, the printer only prints about 1" of the text down the left side of the page. The text fades to white, and the entire remainder of the page is blank! I re-seated the toner cardtridges, ran the cleaning program, and am still getting the same results! Any suggestions? A scan of the page is attached. It came out this way after each solution that I tried!

To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Laserjet 2015 Printing Problem

1)I have hp laserjet 2015 share printer , when I print from other machine if the page is one it is coming with no problem. when I print a file which is contain 8 pages, in this 8 pages If I want to print page no 2-3 pages, if it is mention then printer is faild to print the job. Otherwise current pages or all pages print coming properly.
2) In this printer If I want to print a excel file in landscape mode, and I've done all printer settings in landscape mode. Print coming in portrait mode in single page. But printer test page in landscape mode coming properly.

Hello sm4ads,
Welcome to the HP Forums!
I understand your concerns. Unfortunately, for this type of printer, I need to direct you to our Enterprise Business Community Forums. This will be the right section to troubleshoot this issue.
Good luck.
I worked on behalf of HP.

HP Laserjet 2015 ..."Cannot Find Server"

I am having trouble in having my printer be a... "Network Printer"…. It is a HP Laserjet 2015 Printer.
I have a Mac OS version ~ 10.8.2 on my Apple computer.
If i have the printer connect directly to the computer via USB, (with no network) the printer works fine, but if I try to set up a network using an Ethernet Cable from the Printer Server to the Linksys E1200 Router, then I am unable to print. I get a page with ERROR messages.
I am using a HP JetDirect 175x External Print Server
When I run "Network Diagnostics"…. I get a….. "Cannot find Server"….. along with the message below….
Jim
Network Diagnostics
“Cannot Find Server”
This computer appears to have a working Internet connection, but cannot find “HP LaserJet 2015 (00110AB8E541)._printer._tcp.local.”. You may have typed the address incorrectly.
On the Sidebar titled, “Network Status”
Wi-Fi is............……........ Green
Wi-Fi Settings is...…..... Green
Network Settings is…... Green
ISP is.....................……... Green
Internet is...............…..... Green
Server (Failed) is...……... Red
This question was solved.
View Solution.

Thank you Garland_M for replying.
I have since removed the Printer Server, and found that I can simply put the USB Cable from the Printer to Computer 1, and Computer 2 will see it on the Network..... so I didn't even need that Printer Server in my setup as I had been informed.
Jim

Using my new HP 2015 in Classic

Just bought and installed a new HP 2015 printer, but I can't print from
Classic (have one old program that I still use). When I go to Chooser,
and select LaserWriter 8, there are no options to choose (as there were
with my old HP 6MP. If I try and print from my old program, the item
I was trying to print disappears...and the program crashes.
Any help you can provide would be appreciated!

Greg: Thanks. Folllowed your suggestion. Was able to re-add two printers in
OS 10, but (when I clicked on LaserWriter 8 in Classic) nothing showed up,
even after restarting the computer.

New laserjet pro cp1525 ejecting extra, blank, page at end of print request. how do you stop?

Just installed a new Laserjet Pro CP 1525nw. It wants to expel a blank sheet after every print request. How do I stop it from ejecting the blank sheety at the end of the print request.

Is this only on a certain app? What about printing a windows test page or even from notepad? If these are ok then this would suggest its the page setups in the program you ate using rather than driver / printer.
If its all apps try the reports from the printer direct, if this is ok then it's probably drivers. Remove from safe mode and download updated.

My new LaserJet Pro CM 1415 does not print web pages. Please help. Thanks.

My new LaserJet Pro CM1415 does not print web pages. I go a printed message says:
PCL XL Error
    Subsystem: TEXT
    Error: InternalError 0x50
    File name: cheettext
    Line number: 710
Thank you for helping.
Christopher

I have similar problem but it happens when printing anything to the printer. has there been any solution posted?

Formatter for hp LaserJet 2015 always damage?

This Formatter for this printer hp laserjet 2015 always got damage after a year of use. Why this Formatter for this model always got damage? Do we need to buy this formatter always? And This Formatter Cost too much for such Board. Do we need to change it always when it got damage? please anyone can give me an answer ASAP...

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

New iMac (2015-Yosemite) won't read old Time Capsule files

My new iMac 2015 (OS X Yosemite 10.10.1) won't read (access) my old backup files on the Time Capsule. The old machine ( iMac 2007) is still backing up to the Time Capsule and still reads all the 2 years of backup files. New machine only allows access to the current backup since I turned on the new machine early-January. The old machine ( in another room ) accesses the Time Capsule via my local house wi-fi . There is no crossover between the backups. Old machine reads all up to now ON the old machine; new machine reads only that which is backed up on the new one since start-up. How do I get the new iMac to read the old files ?

Check out tip E2 on this website: Time Machine - Troubleshooting.

Hello, I have installed a new Laserjet Pro M1217nfl using Wi-Fi. My laptop prints everything e-mails, Word documents etc. My iPad 3 (latest issue) only prints documents using Wi-Fi so has clearly recognised the printer. How can I prin e-mails using iPad 3

Hello, I have installed a new Laserjet Pro M1217nfl using Wi-Fi. My laptop prints everything e-mails, Word documents etc. My iPad 3 (latest issue) only prints documents using Wi-Fi so has clearly recognised the printer. How can I print e-mails? Thanks.

In the email you want to print, on the top right there is an arrow. Click that and an option should appear that says print. That should work. Have you already tried that?

New Mail Alert Tone no longer working

I didn't change any settings and in my preferences, it's still set for the new mail alert tone to sound when I get new mail. However, as of yesterday, it's no longer working. I still get the sound when I send mail out, just not when new mail comes in. How do I fix this?
Thanks,
Carole

Ok, this is weird. This morning my new mail alert tone started working again. I have no idea what made it stop, or what made it come back on.
Carole

HP LaserJet M1132 toner cartridges not delivering full capacity

I have a LaserJet M1132 MFP bought last week. Connection is USB, operating system is Windows 8 - 64bit. Have upgraded to latest firmware. Driver is latest Windows 8 driver. Settings are default (fastres 600).
When using the initial toner cartridge that came with the unit, it delivered only around 250 text (note text and not graphics) pages before it ran out. I know this because I bought three reams of paper when I bought the unit and used half a pack. Coverage was around 50% per page, double sided. I took it out and shook it but this made no difference.
I purchased two new original HP CE285A cartidges at the same time as I bought the printer. I wondered if the original cartridge was a reduced capacity cartridge. So I installed a new cartridge. The toner light came on after printing 935 pages (from the status page). Again, the majority of these were text pages at 50% coverage double sided.
Each cartridge is £75 which gives a per page cost of around 8p/page (not including the cost of the printer) which is outrageous for a laser printer. The packaging estimates around 1,500 pages per cartridge but I clearly didn't get anywhere near this with the first cartridge and am not getting this with the second one either. I have another HP MFP (3500) which delivers around 5 reams before a cartridge runs out.
I am an extremely experienced user with 25 years in printing and imaging and know that estimates assume a certain coverage. I am by no means using a heavy coverage. I am extremely unhappy to say the least. Your help and advice appreciated.
Regards
Tony Harris
This question was solved.
View Solution.

The only thing you can do to try and extend the cartridge life a bit more is enable EconoMode on the print driver. Most likely this was enabled on the devices being tested for the cartridge yield. I'll include the instructions to enable it below. Let me know what happens.
Click on the Start menu.
Click on Devices and Printer.
Right-click on your printer.
Select Printer Preferences.
Click on the Quality tab. It may be labeled as the Paper/Quality tab.
Click the box next to EconoMode to enable it.
Click Apply to save the change.
Click OK to close the window.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Installing and running Arch linux on the new MacBook 2015

So Apple has just started taking orders for the new 2015 MacBook. You know --
the thinnest and lightest MacBook to date (even thinner than the MacBook Air),
with a 12 inch retina display, the Intel Core M processor, a single USB-C port,
and the new force touch trackpad.
I'm pretty sure there are a few people like me who'd like to buy this new
MacBook and then install and run Arch (or some other flavor of linux) on it.
But of course, this MacBook is in many ways very dissimilar to previous MacBook
Pros and MacBook Airs. So this thread is a shout out to likeminded individuals
who are willing to brave the odds and install Linux on this new machine, so we
can help each other figure out (and hopefully fix) the inevitable issues that
will arise when we venture into this uncharted territory!
I have a little bit of experience installing and running Arch on MacBook Pros
and other Apple computers, but I'm (very) far from being an expert. But based
on my limited experience, I think the following areas will pose the biggest
challenges to getting Linux properly up and running on the new MacBook:
1. Installation: it's possible that booting a live USB will fail. So we might
have to use a CD. Indeed, perhaps we may even have to build a special ISO
image for this laptop. And once the install is complete, EFI/EFISTUB booting
with/without refit/refind may or may not work. Also, installing a bootloader
(grub, gummiboot, etc.) for dual booting Mac OS X and Linux may be a
challenge. We might have to endure kernel panics and deal with cryptic error
messages while booting.
2. Wifi may or may not work reliably. We might have to do some tinkering with
different drivers, etc.
3. Battery life may not be very good. We might have to fix a few things here.
4. The HiDPI retina display may or may not work properly with specific window
managers/desktop environments. Fonts/icons might be too tiny, may not scale,
etc.
5. The new Force touch trackpad may not work out of the box. In fact, I'm
fairly sure the regular xf86-input-synaptics package won't play nice with
this trackpad. There may not be support for features like the trackpad's
haptic feedback, multi-finger gestures, pressure sensitivity, etc. Indeed,
this might actually take a while to get properly working under Linux.
6. I don't know if the new USB-C port will work out of the box. It may not
play nice with USB flash drives and other peripherals and there may be
issues with ehci/uhci/whatever.
I tried Googling around trying to learn as much as I could about the issues
above, but since the laptop is going on sale only today and most users are
probably not interested in running Linux on it, I came up quite empty. I think
many others on this forum might also have faced the same issue.
So here's an open invitation. Let's share our experiences trying to get linux
working on this laptop. If you buy this laptop and try to install Arch on
it, please let us know how it went! Even if some things work out of the box, it
might be useful for others to know, so please share.
And of course, if you have more information/gotchas: for example, if you
encountered and managed to fix one or more of the issues above, or you
encountered a problem that's not on the list above, or even if you tried
something and it didn't work out as expected, please post below. I'm sure this
will be a very big help to others trying to solve similar issues on the same
hardware. Thanks!

It would probably be beneficial to post the output of lsusb -vvvv and dmesg.
FS1RTG77 wrote:
2. Broadcom BCM4360 AirPort Extreme, not supported.
5. The new Force touch trackpad and keyboard, both SPI bus devices, do not work.
On 2, it may just be a case of needing firmware, my laptop has a BCM43602 card, and the firmware required has only just been added to the linux-firmware package. Prior to that I had to install it manually.
On 5, I'm wondering if you identified them as SPI devices by looking in OS X, I ask because my laptop categorises my keyboard and trackpad in the same way. But they are actually still both connected to the USB bus, and presumably using SPI as an interconnect between the keyboard/trackpad and the microcontroller that tie them together.

HP Laserjet 4050 toner cartridge issue

I look after a laserjet 4050 printer for a company. They recently started using a new toner cartridge (higher quality) but they have started to have issues with black ink lines down one side of the paper. They have sent back toner cartridges (thinking them to be faulty) but cartridges are fine.
Is this a printer issue or is there an issue with the toner cartridge and the 4050 printer (not compatable)

I think I may have the solution to your problem. I do not think the toner is your problem here. From my experience i would suggest that your printer may need to be cleaned. I had a client who had a similar problem with his printer, what you should try doing is the following:
If toner specks appear on the front or back side of your print jobs, follow the procedure below to clean the paper path.
Using the printer cleaning page
From the printer’s control panel, do the following:
Press MENU until "Print Quality Menu" appears.
Press ITEM until "Create Cleaning Page" appears.
Press SELECT to create the cleaning page.
Follow the instructions on the cleaning page to complete the cleaning process.
NOTE: In order for the cleaning page to work properly, print the page on copier grade paper (not bond or rough paper).
You might need to create a cleaning page more than once. When toner has been cleaned from inside the printer, shiny black spots will appear on the page’s black strip.
To ensure good print quality with certain types of paper, use the cleaning page every time that the print cartridge is replaced.
I am confident that your toner should print clear pages after this.
(Removed items in coflict with Terms of Service (n).)
Message Edited by SandyD on 06-06-2009 12:29 PM

New Laserjet 2015 toner LIFE??

Similar Messages

Maybe you are looking for