New Late 2012/13 iMacs - No DVD/CD drive

Hi,
      does anyone know as the very New Slim iMac ( Late 2012 to date ) does not have a DVD drive anymore, would the Ex.dvd drive you can get for the MB Air work with the iMac ?
Just thought I would ask.
Steve
"Happy New Year" to everyone too

Do note that this one is bus-powered and might affect performance. It's also limited WRT to reads and writes:
Slot-loading 8x SuperDrive (DVDA±R DL/DVDA±RW/CD-RW)
Writes DVD+R DL and DVD-R DL discs at up to 6x speed
Writes DVD-R and DVD+R discs at up to 8x speed
Writes DVD-RW discs at up to 6x speed and DVD+RW discs at up to 8x speed
Reads DVDs at up to 8x speed
Writes CD-R discs at up to 24x speed
Writes CD-RW discs at up to 16x speed
Reads CDs at up to 24x speed

Similar Messages

  • Headphone jack not working on brand new late 2012 27" iMac

    Just purchased the new late 2012 27" iMac. Have tried 3 pairs of headphones, all work with my iPhone but when plugged into back of iMac, they do not show up in Sound>Output as an option. Only internal speakers and Apple TV.
    I have pushed...hard. Not the issue.
    Tired changing Audio Midi settings to 32-bit floating. Didn't do anything...
    Any thoughts?
    Thx

    What you did at last?
    This is happening to me and I'm very disappointed and frustrated!
    Is the first time I tried to use a headphones and the stupid machine doesn't work!
    I already reseted PRAM and SMC also updated OS to 10.8.4
    Is a HW problem?
    Do I have to go to the store and lost ALL the time I already invested in SW install and file moving from my old laptop?
    By the way I can see the light when I unplug the heardphones.
    Before some help desk robot asks, YES, I tried 3 pair of phones ALL of them work well in my Vostro 3550, Samsung S3 and in my Nexus 7.
    Some light here please!

  • Does Adobe Premier Pro CS6 and After Effects CS6 support the graphic found in the new late 2012 27" iMac?

    Hi there guys! I´m very, very, VERY close to buy a full configuration iMac (the late 2012 27" model) but I have reed in different forums that Adobe Premier Pro CS6 and other applications from Adobe such as After Effects DO NOT support the graphic cards found in the new iMacs....
    is this true??????
    i really wouldn´t understad the logic behid the decission of picking a graphic card that is not supported by one of the leading video editing sofrware used today.... specially when this computer is suppoused to be an Editing Animal....
    I hope this rumor is not real..... then I can be just... really happy and get my new desktop computer and work, work, work, work
    thanks for your attention

    Hi there Daniel, thanks for paying attention to this subject. Today I got an answer from Larry Jordan from his blog (I believe he is one of the "videoguys" from http://videoguys.com and he said that actually adobe does not support those GPU that we will find in the new late 2012 iMacs. However it seems there is a way to make that work out.....
    here is his review on his new iMac, at the very botton you will see comments from people and his answers... one of the last coments is mine regarding this subject, this is what I asked and his answer:
    mGabo Jan 18, 2013 08:50Hi there Larry, I reed in your other post on your iMac that Adobe didn´t support the Nvidia graphic cards found in this model, I have been asking in forums about this and people say Adobe does supports them……Do you know if Adobe now works fine with these cards?
    Larry Jan 18, 2013 11:10When I contacted Adobe about this a couple months ago, just after the release of the new iMacs, I was told that Adobe did not support the graphics card at that time. There is, however, a workaround, which I’m hoping to write up this weekend.Larry
    mGabo Jan 18, 2013 12:28 oh! great Larry! please post the link of that article so I can follow that!many thanks
    here is the link of this article: http://www.larryjordan.biz/app_bin/wordpress/archives/2084/comment-page-1#commen t-7853
    so far I haven´t find anyone who can expalin to me how can I get these Nvidia GPUs working with adobe premier and aplications alike from adobe.

  • Cannot reinstall OS X on brand new Late 2012 27" iMac

    Using either a flash drive or trying to install Mountain Lion from the store I get the same message that informs me that OS X Mountain Lion is not compatible with this computer. I would assume they have some sort of custom build for this machine currently but this doesn't make it easy to quickly deploy a new machine with a clean install. I am currently using a recovery disk that I made using recovery disk assistant which will work OK but it still doesn't answer why we are not allowed to install the supported OS from scratch.

    The Late 2012 iMac uses a special OS X build that it's not available from the App Store. However, you can erase the disk and reinstall OS X Mountain Lion without any problem. To do it:
    1. Press Command and R keys while your Mac is starting to start into Recovery.
    2. Open Disk Utility, select Macintosh HD in the sidebar, go to Erase tab and erase the disk.
    3. Close Disk Utility and reinstall OS X.
    This issue will be fixed in 10.8.3

  • I want to give my late 2012 27" iMac to my daughter.  How do I remove my personal stuff to give her a clean start??

    How do I clean or restore a late 2012 27" iMac to original state to give as a gift to my daughter?  I use os-10.9 and transferred needed info to my new iMac on 11/20/14.

    Click here and follow the instructions.
    (117001)

  • Randomly shutting down late 2012 27" iMac, 3.2 GHz i5 processor.  16 out of 32 GB ram (crucial).  Tried the PRAM and SMC, both did not work.

    Hello,  I have a late 2012 27" iMac.  Its a 3.2 GHz i5 processor.  I originally upgraded my ram to 32 GB and was running like a champ for over a year.  Then, it started to randomly turn off no matter what I was doing.  I took it to the apple store and they said it was the ram.  So I ordered 16 GB of ram from Crucial that matched what they said my computer would need. I got it in last week and installed it and it still turns off randomly. I have tried the PRAM and SMC resets and the computer will run like a champ for 15-20 mins then turns off. I would love any help, advice or possible solutions as I am by no means a computer wiz. Thanks in advanced! 

    Very true - and the tests they do at the store are far better than the AHT. As well, Apple does not tell you where it puts the RAM - they just tell you to add RAM in the empty slots, LOL. Your About this Mac > Memory should show your two modules next to one another (which, as I've decided to "name" them would be slots 1 and 3 as showing from the top as you are looking at it with all the slots facing you (the bottom being towards the bottom of the display). The odd thing (to me) is that the 'about this mac' window still shows the same arrangement even though the modules are now placed vertically. In mine (with two rows of two slots side by side), it shows the OEM RAM in the top and the additional RAM I added on the bottom (which is exactly how the slots are arranged):
    And, one more thought - maybe way off - the late 2009/mid 2010/early 2011 iMacs had problems with adding a full complement of third party RAM (they were ok with all OEM or a lesser amount of third party RAM - that is why mine only has 12 GB rather than the supported 16 GB). There were several very lengthy threads about this; I will try to find one of them which I had bookmarked (I can't find my bookmarks in this new iteration here)...

  • Clean install of Mountain Lion on the late 2012 27" iMac

    I used migration assistant to move all my stuff from my late 2009 iMac to my new late 2012 iMac. Now I would rather do a clean install and manually move stuff over. How can I do a clean install when there is no reinstall disk that came with the new iMac?

    There's a set of reinstallation tools on another partition of your drive, or your system can download and boot from the tools across the Internet.Take a look here:
    http://support.apple.com/kb/HT4718
    Regards.

  • Windows 8 on late 2012 27" iMac?

    Hi Guys,
      I m planning to install windows 8 on my late 2012 27" iMac, i read online that people have over heating issues with their macs when gaming via bootcamp. Is that true & is there any issue i should be worried about? The new slim late 2012 iMacs are suppose to be better in cooling, anyone with these new slim iMacs can give me feedback? are the new iMacs handling the gaming via bootcamp better then the old ones? is there any safety precaution i should take like placing a external usb fan near the iMac? feedback would be great.
    Thanks

    Apple is releasing an update to mountain lion that wil solve your bootcamp problems with your 3tb apple imac!! her are the release notes for the beta. It also include windows 8 bootcamp drivers,finally !!
    The installer includes a feature list:
    The 10.8.3 update is recommended for all OS X Mountain Lion users and includes features and fixes that improve the stability, compatibility, and security of your Mac, including the following:
    •     The ability to redeem iTunes gift cards in the Mac App Store using your Mac's built-in camera
    •     Boot Camp support for installing Windows 8
    •     Boot Camp support for Macs with a 3TB hard drive
    •     A fix for an issue that may cause Logic Pro to become unresponsive when using certain plug-ins
    •     A fix for an issue that may cause audio to stutter on 2011 iMacs
    •     Includes Safari 6.0.3

  • Image Persistence On Late 2012 27" iMacs

    Hi.
    I'm currently on my second late 2012, 27" iMac. I returned the first one I bought because of uneven color from top to bottom of the display, as well as a very readable image of my browser's address bar that seemed to not want to vanish from the display against a plain dark gray background every time I closed the browser. It was a persistent image after using the browser for only five minutes. It was pretty bad, and I exchanged the computer for a replacement.
    The replacement model is much better. The colors are pretty even, and if I leave a web page open for a long time, the ghost image on the display generally takes about ten minutes to fade completely away, against the plain dark gray background that I've set as my desktop wallpaper. On my previous model, the image of the address bar never really left. It was, like... permanently burned in.
    I've read an awful lot in these forums about image persistence, and also the help articles that Apple published on this site about it. I'm aware that Apple acknowledges this as normal behavior for their displays.
    I still have a couple of days left, where I can return this replacement unit for another iMac, or get a refund. My question to the community is this: Is what I have now, as good as it gets? I'd hate to take this one back, and exchange it for another that's only the same, or possibly worse.
    Mostly, I'm concerned about residual artifacts from desktop wallpapers, recently closed application windows, etc., interfering with accurate perception of, say, a photo that I open to edit or something. It's a little worrisome. I don't plan to use blank wallpaper forever, or wait ten or twenty minutes after browsing the web before proceeding to work on graphics.

    Although I don't own a imac from reading these forums I'd have to say what you now have is as good as it gets. So that leaves 2 options.
    Live with it.
    Or return it for a refund and move on to some other mac computer or something else.

  • I just bought a new late 2013 27" iMac base model from the Apple Store.

    Hi, I just recently purchased the new late 2013 27" iMac from the Apple store, base model that is $1999.00. This is my very first iMac and I was wondering if this is a good first time iMac users PC? My wife will be mainly composing music on it. Any thoughts would be greatly appreciated, thanks!

    Yes, it's perfect. FWIW, next time you plan to buy a computer ask this question before you purchase it, not after.

  • New late 2012 iMac with Mountain Lion - won't open Reader Library

    Everything transferred from my old iMac (2009) to my new iMav (late 2012), except for the READER LIBRARY.  It won't open on the desktop, and it won't open or recognize my Sony e-reader.

    I'm about to attempt the same thing -- migrate everything from my old iMac (running 10.6.8) to a brand-new iMac (running Mountain Lion). 
    Still using FCP7, with no intention of switching to FCP X. 
    Should Migration Assistant work for me?  Would updating my old iMac to Mountain Lion first make a difference?  (I've already purchased it for my laptop, just haven't used it on my iMac).

  • Is there anyway to play xbox on my new ( late 2012 ) imac

    Hi everyone
    im new to the whole apple computer stuff so bare with me
    Basically ive brought the new imac ( late 2012) and was wondering if there is any cable by apple or third party that will allow me to link my xbox up to it
    All help appreciated thanks

    Won't work. That's for connecting an HDMI display to a device with a mini-DisplayPort. It won't work in reverse. The other adapters you refer to above are the same sort of adapter and hence won't work either. It would take a converter that can convert an HDMI signal to a DisplayPort, such as this one:
    http://www.kanexlive.com/xd
    Regards.

  • Late 2009 imac as second display for new (late 2012) imac. How to?

    I have a late 2009 imac 27 that I would like to use as a second display for my late 2012 imac 27. Has anybody connected them successfully? I am getting very mixed information on the topic.

    Thank you. Here's where my confusion comes in
    "iMac (Mid 2011) and later: target Display Mode does not work with Mini DisplayPort cable"
    Symptoms
    When you attempt to connect an iMac (21.5-inch or 27-inch, Mid 2011) and later to another computer with a Mini DisplayPort to Mini DisplayPort cable, the screen of the target iMac will not become an external display when you press Command-F2 to activate Target Display Mode.
    Resolution
    iMac (21.5-inch, Mid 2011) and iMac (27-inch, Mid 2011) and later computers support Target Display Mode via Thunderbolt to Thunderbolt cable (2 m) when the source is another Thunderbolt-equipped computer.
    iMac (27-inch, Mid 2011) computers do not support Target Display Mode via Mini DisplayPort cables.

  • Mac Mini (late 2012) vs. iMac (mid 2007)

    I use my computer primarily for video conversion, internet, iTunes, iPhoto, iMovie (occassionaly...too slow), iWork, Office, various other things but NO Final Cut video editing and intense graphics work.
    I've wanted to get a new Mac for quite sometime.  I have an abundance of monitors, mainly HD, just laying around collecting dust, one on a Windows () 8 computer, figured I might just get a Mini.
    I have an opportunity to upgrade from a:
    24" iMac 7,1 (mid 2007)
    2.4 GHz Intel 2 Core Duo
    4 GB Memory
    ATI Radeon HD 2600
    to a:
    Mac Mini MD387LL/A (late 2012)
    2.5 GHz Intel Core i5
    8 GB Memory
    Intel HD Graphics 4000
    Questions:
    1. % wise, how much faster would it take to convert a video of the same format and length? Significantly?
    2. I use AirParrot to send internet video to my Apple TV, tried looking for it (remember seeing it somewhere), can I see my screen or AirPlay it to AppleTV without having to use a HDMI or AirParrot application.
    3. Will I really see a TREMENDOUS amount of performance from the newer Mini in comparision to my old iMac?
    I've read reviews online and have amazing read arguments for and against to the point that my gut is going crazy. Are the benchmarks between the i5 and Core Duo significantly going to reduce my work load.
    Please provide some feedback as I truly appreciate it.
    THANKS!

    For a rough guage...
    iMac "Core 2 Duo" 2.4 24-Inch (Mid 2007)... Geekbench:3216/3595
    Mac mini "Core i5" 2.5 (Late 2012)... Geekbench: 6643/7469
    http://www.everymac.com/systems/by_capability/mac-specs-by-machine-model-machine -id.html

  • Late 2012 i7 iMac not waking up and also finding wifi enabled after I turned it off as I use ethernet

    I have a late 2012 i7 3.4 imac with 32 GB ram.  I am finding a perplexing issue and I hope someone may help me out.  I am blessed with the inability to wake my mac up after an overnight sleep intermittently must push power off and then turn on again to reboot.  I noticed since this started that the imac wifi is always turned on when I restart .  i connect via Ethernet (FIOS).  The wifi connection is a extension of my FIOS router wifi.  Will there be any problems with wifi on along with Ethernet connection?  The only software I have on my mac that shows it can work with either connection is CrashPlan. 
    I have no idea how the wifi enables itself as I do not activate it and the icon in the upper taskbar is an empty triangle usually.  This am it was a triangle filled with black lines and when I checked it was enabled.   Any suggestions or tips would be greatly appreciated.  Thank you.

    Michael Allbritton wrote:
    Yes, folks have gotten refunds even though the TOS says all sales are final. You'll need to contact iTunes Store support and politely make your case that you're just not satisfied with the service.
    I've got kind of a radical suggestion, if you want to try it. In cases like you describe a full OS restore, then setting the iPhone up as a new device can fix all these little glitches. It is a lot of trouble, I know, but if you do want to use the service this is one method that should clear it all up for you.
    Thank you, it's good to know that Apple does offer refunds.  I want it to work, if it does what I would like the $25 would be more than worth it.
    I thought clearing my music and starting up iTunes Match with an empty music library might do the equivalent of a full reset... I can't say I really feel like doing that, and I'm skeptical it would clear up all of the issues I've had (play counts, play lists, album art, data usage when I told it to bloody well not use the data).
    Thanks for the input!

Maybe you are looking for

  • The browser back button is not working correctly when using the search funtion in ProBoards forums. Is there a known issue with ProBoards & FF?

    I have submitted a bug report to ProBoards, but they cannot duplicate the problem I am having, so I am submitting this here in hopes you can find a solution. At ProBoards Support and another PB forum while doing searches I found this problem, which c

  • Imac will only work in safe mode

    This follows on from a previos posting where I had to reformat the hard drive because of file conflicts. Since then the pc worked fine for a while then suddenly froze and will only boot now in safe mode again. If we leave it on overnight it sometimes

  • Assignment field in Billing Document

    Hi, Can anyone tell me how the Assignment filed (VBRK-ZUONR) is updated in biiling document. We have an issue in passing the value to the accounting document. I was refereing to existing billing documents, infew invoices the filed is populated with P

  • QUANTITY MULTIPLIES BY 9 ON REPORT

    Hi... I am doing a very basic PO report where I have the order number, line no, quantity and unit price. I have got the quantity and unit price at detail level but when I run the report I get repeated 9 lines displayed for each order. If I set the un

  • Digital clock which randomly selects different colors from Applet

    Hi, I relatively new to java, what I'm trying to do is list about five colours in my Applet and pass the colours into my java code, and maybe the font..... I want to be able to Display a digital clock which randomly selects different colours which we