New late 2013 MBP Retina not using 802.11ac

Hi, I recently started to use a late 2013 15" Macbook Pro Retina with the newest Time Capsule. However, it's not connecting with 802.11ac. Rather it's using 802.11n. Is there a setting that I need to change to "force" it to use 802.11ac? Of note, I'm using 10.9; I haven't upgraded to 10.9.1 yet.

While booting the apple logo is purple and the the grey screen turn yellow for a second.

Similar Messages

My late 2013 MBP Retina battery gets only about 4 hrs. What might be wrong?

My late 2013 MBP Retina battery gets only about 4 hrs. What might be wrong?

I found a solution!
Perhaps this is just temporary, but I have my display up and working again.
Although the symptoms are different were a bit different, the solution here worked:
http://apple.stackexchange.com/questions/120259/grey-screen-after-login-blue-scr een-of-death-from-cmdr
As I was able to connect to my HD via an external monitor, in the finder, I went to:
1. Macintosh HD --> System --> Library --> Extensions
2. From there I moved all of the files that started with ADM and ATI (19 in total for me) to a folder on my desktop. (You will need to enter your admin password for this)
3. Next was a restart.
4. Then my display started working again.
5. After that, I transferred the files back into my Extensions folder.
6. I then did another restart with my fingers crossed and breath held. It worked.
Also... During the last few days of trying to find a fix, I restored a Mavericks backup to my computer away from Yosemite.
I'm very sure this problem occurred when I put my MBP to sleep, disconnected the power in its sleep, while something was connected to a USB port and unplugging the USB device (for me an iPhone charger) while the MBP was closed.
I hope this helps the next person.

Can I upgrade memory/SSD on late 2013 MBP retina?

I have late 2013 MBP retina, 2.4 ghz, 11,1., basic 4GB and 125GB. I checked with OWC and they yet to have any solutions to upgrade. Am I stuck with this? Wanting to do some video editing and afraid I'll be bogged down.

No. Neither are user-upgradeable in that model. What makes you feel you will be bogged down? If you need more disk space just add an external USB drive. You should have sufficient RAM if you don't try to run far too many applications concurrently for the memory installed.

Late 2013 MBP Retina display stains

Late 2013 MBP Retina display stains, getting worse.
I am always very carefully with my mac, still the display always looks smudged. Even when I just close the lid, for transport, I have like the keyboard printed on my display when I open it again. Now I discovered more and more light spots which can't be wiped of at all.
There is obviously a problem with these retina displays.
I am very disappointed I have to say. I'm out of warranty but I can't believe that I pay € 2.600,- and get a display like that!
Please Apple, do something…

While booting the apple logo is purple and the the grey screen turn yellow for a second.

SSD Upgrade on Late 2013 MBP Retina

I would like to upgrade my SSD on my macbook pro retina late 2013 model it has 512 in it currently and I want to goto 1TB I know its $500 I am willing to pay the difference but apple is saying its is soldered on the logic board. Which clearly is not true. I got my laptop at bestbuy because my old one broke and bestbuy replaced it with a newer model. I would of gotten it from apple but I had to get it from BestBuy since they replaced it.

Thanks for your reply. I may not have been clear enough in my post; OWCs SSDs will NOT work in the late 2013 MacBook Pros (they've clarified their website product description to make that abundantly clear); the newest MacBook Pros use PCIe controllers, both for the SSD interface and for the SDXC slot; the 2012 and early 2013 MacBook Pros use SATA; the two are NOT interchangeable, and OWC doesn't make ANY SSD cards that will work in the newest MacBook Pros (yet).
Of course, that's not relevant for the OP, who has a late 2013 MacBook Pro and wants a bigger SSD. My reply to "helpme05" was intended to suggest to him that there may BE such a product from OWC in the future, because iFixIt's teardown of the newest MacBook Pros shows that the SSD still plugs into a (mecahnically and logically different from that on the 2012 and early 2013 machines) motherboard socket.
Your response DID clear up my misunderstanding of why OWC's SSD maxes out at 480 GB; they're using the more conservative estimate of size (base 2 vs base 10), contrasting with Apple's measurement rubric. So, OWC's 480 GB is the same size as OWC's 512 GB unit.
I'm sure you've heard the joke: "There are 10 kinds of people in the world; those who understand binary, and those who don't."
Thanks again,
Jim Robertson

Unreplicable WLAN issues on late 2013 MBP Retina

Hi all,
I've been having a very strange issue with my MacBook's wifi at home. The issue exists only at home, and only on my machine. All other devices (multiple other iPads, iPhones, windows/mac computers, AppleTV, XBOX) function without any issues on our wifi network, and my machine works fine on any other network. So again, only my laptop, only at home.
Basically my MacBook will drop the connection. It has always been an issue but it seems to be getting worse. After pinging my gateway 100 times i got a 76.8% packet loss rate. It seems to connect briefly occasionally, and sometimes will run for up to 20 minutes before it happens again.
We have replaced our router, as well as our Airport Express unit, bu none of these solutions have helped, reinforcing the probability of it being isolated to my laptop.
An authorised Apple reseller told me it's a known software issue which Apple doesn't have an update for, meaning there's nothing I can do about it since software isn't covered by Apple Care. The Apple Store however is convinced that it's our network.
I have had some of the following suggestions:
Switch router to Bridge Mode
Try creating a new user profile on the mac
Try reinstalling OSX
Using static IPs on all devices used at home
Have any of you had the same issue? What are your thoughts on the above solutions? Have any you solved it?

Thanks for your reply. I may not have been clear enough in my post; OWCs SSDs will NOT work in the late 2013 MacBook Pros (they've clarified their website product description to make that abundantly clear); the newest MacBook Pros use PCIe controllers, both for the SSD interface and for the SDXC slot; the 2012 and early 2013 MacBook Pros use SATA; the two are NOT interchangeable, and OWC doesn't make ANY SSD cards that will work in the newest MacBook Pros (yet).
Of course, that's not relevant for the OP, who has a late 2013 MacBook Pro and wants a bigger SSD. My reply to "helpme05" was intended to suggest to him that there may BE such a product from OWC in the future, because iFixIt's teardown of the newest MacBook Pros shows that the SSD still plugs into a (mecahnically and logically different from that on the 2012 and early 2013 machines) motherboard socket.
Your response DID clear up my misunderstanding of why OWC's SSD maxes out at 480 GB; they're using the more conservative estimate of size (base 2 vs base 10), contrasting with Apple's measurement rubric. So, OWC's 480 GB is the same size as OWC's 512 GB unit.
I'm sure you've heard the joke: "There are 10 kinds of people in the world; those who understand binary, and those who don't."
Thanks again,
Jim Robertson

Late 2013 MBP Retina - vertical lines

I have vertical thin colored lines showing on the left side of my display (13.3" MacBook Pro with Retina screen).
Getting progressively worse with additional lines and colors. Never had this before, mac was sleeping and fully charged, opened the lid and noticed the lines. The lines get worse if I press the screen. Afaik it's not due to any abuse or damage. Screen does not show any physical damage or cracks.
Ran a Diagnostic test but no errors. Also when I take a screenshot of my current screen, the screenshot does NOT show the lines. So must not be the graphics card...? Any ideas..? Will take it in tomorrow to Apple Store, but really bummed about this...
Mac Book Pro Retina (late 2013), Mac OS X Yosemite.
https://discussions.apple.com/thread/5691866?searchText=Retina vertical lines

Hi SanCuracao,
I'm sorry to hear you are having issues with your MacBook Pro. Based on your description and the attached pics, it would certainly appear that you have some sort of hardware issue with the display panel on your MacBook Pro. If you haven't already, you would want to make sure you take it in to have it evaluated and serviced. You may find the following page helpful:
Apple - Support - Service Answer Center
Regards,
- Brenden

WHY is Safari failing to load pages on my late 2013 MBP retina?

I have the latest OS and Safari on my machine. Safari is not usable. Every now and then, I can go to a web page in a reasonable amount of time but, more often, the page either doesn't load (the blue shading in the address bar stops after about an inch and freezes) or the page takes several minutes to load. This computer is too new to be having these kinds of issues.....
I know the next step (according to Apple support) is to reinstall the OS, which I will do once back up is complete. Here's what I've done previously, to no avail: confirmed that there are no extensions, reset Safari multiple times, deleted the plist file from the Library, repaired disk permissions, shut down, restarted, restarted in safe mode, etc. Regarding the repair permissions - there is always a Safari permission that needs to be repaired. Same one every time. Not that repairing permissions was a fix.....
I am hoping the reinstall works but I'm frustrated that this is happening on a new, very expensive computer. I want to understand what the root cause is....any ideas about what is broken and how it got broken? Thanks.

Please answer as many of the following questions as you can. You may already have answered some of them. In that case, there's no need to repeat the answers.
Have you restarted your router and your broadband device (if they're separate) since you first noticed the problem? If not, do that now and see whether there's any change.
If your browser is Safari, then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Any change?
If you're running OS X 10.9 or later, select the Advanced tab in the Preferences window and uncheck the box marked
Stop plug-ins to save power
Any change?
Quit and relaunch the browser. Any change?
Log out and log back in. Any change?
Enable Private Browsing in the Safari menu. Any change?
Are any other web browsers installed, and are they the same? What about other Internet applications, such as iTunes and the App Store?
If other browsers and Internet applications are also affected, follow these instructions and test. Any change?
If Parental Controls is active for any user, please turn it off and test. Any change?
If only Safari is affected, launch the Activity Monitor application and enter "web" (without the quotes) in the search box. If a process named "Safari Web Content" is shown in red or is using more than about 5% of a CPU, select it and force it to quit by clicking the X or Quit Process button in the toolbar of the window. There may be more than one such process. Any improvement?
Again, if only Safari is involved, open the iCloud preference pane and uncheck the box marked Safari, if it's checked. Any change?
Are there any other devices on the same network that can browse the Web, and are they affected?
If you can test Safari on another network, is it the same there?
If you connect to your router with Wi-Fi and you can also connect with Ethernet, do that and turn off Wi-Fi. Any difference?

Late 2013 MBP "Boot Camp x64 is unsupported on this computer model"

Hey yall, some help would be fantastic.
Got my brand new Late 2013 MBP (top end model with the Nvidia GeForce GT 750M) on Thursday and had no problems getting it set up. Having gotten the OSX side all set up, last night I Bootcamped it. The new Bootcamp Assistant did a great job of loading my Windows 7 ISO onto one Flash drive and Bootcamp Assistant 5.0.5433 on the other Flash drive.
Had no problems during installation but the Bootcamp Support Tools didn't install, so I went to install it (attempted to run the setup file) and received this error:
Uh oh.
Using the internet (on my iPad) I was able to learn of a workaround to call the installation by negotiating to "Bootcamp\Drivers\Apple\" and executing the Bootcamp.msi as admin. It appeared to install everything.
However, when I went to change the resolution, I noticed that Windows was using a generic driver and that my max resolution was 1600x1200.
If I could launch a game w/out it immediately crashing, I would have chalked it up to Windows being Windows, but they did and I started digging (assuming that it was an application issue). Tried installing drivers downloaded from Nvidia's website for the 750M but they failed to find applicable hardware. Now concerned, I validated that I had received the correct version of MBP.
Eventually used a tool from M$'s website to remove the Bootcamp Support Software and then downloaded Bootcamp Support Software version 5.0.5033, where I ran into the exact same issue. Perhaps related, perhaps not, but the wireless on the Windows side takes a long time to connect and appears unreliable/periodically slow. That suggests that the wireless drivers weren't installed correctly either.
I have no problem reinstalling Windows, but I'm not convinced that its the problem. The initial error message suggests to me that the Bootcamp Support Software isn't recognizing my MBP. Any thoughts?
Thanks!

Hi,
it took me finally 4 days to setup Windows 7 via bootcamp. The drivers that are downloaded via bootcamp do not work when installing from a flash drive. Here is what I did to fix the issue with "CD/DVD driver missing...." which would show right after you select the language during installation.
While in OS X, go to the intel website and download the the driver for USB 3.0. Place the file on your windows partition. Boot again, hold the option key and select your flash drive which has the Windows 7 installer on it. Once you get the error message, click browse and locate the driver on your windows partition. Once installed, Windows 7 installs without any problems.

New late 2013 Macbook Pro 15" Graphics issue

Im starting this new thread because I cant find anyone else on here with this problem I'm having.
Since I first got my new late 2013 MBP 15" 16gb RAM 1TB Flash Drive. I noticed a couple of things. First, I opened photoshop cc with about 20+ average res images and a few of them had these random black and white square pixels taking up about 15% of the image. I thought the files were corrupt however I could save the files out and there would be no problem. I noticed when I zoomed into the image, the size of the random blocks would shift, change in size or disappear.
Tonight I was working on a few images and two of the images were completely blacked out rectangles! I could see the image fine in the thumbnail view in the layers panel however the viewer was a black rectangle.
Here I made a screencast of the issue: https://www.youtube.com/watch?v=PJGESQMpxJg
Another ongoing issue I'm having... If I'm in Apple mail or another software where I need to attach a file, it sometimes takes up to 30 seconds before the contents of the file can be viewed to attach. I contacted Apple support and they had me reset the System Management Controller. It doesn't happen as often but it still does once in awhile. Since I reset the SMC, now I'm noticing random clicking sounds when opening applications or my MBP does some heavy computing.
I'm not sure if all these issues are software or hardware related.
Any advice would be appreciated!

Im starting this new thread because I cant find anyone else on here with this problem I'm having.
Since I first got my new late 2013 MBP 15" 16gb RAM 1TB Flash Drive. I noticed a couple of things. First, I opened photoshop cc with about 20+ average res images and a few of them had these random black and white square pixels taking up about 15% of the image. I thought the files were corrupt however I could save the files out and there would be no problem. I noticed when I zoomed into the image, the size of the random blocks would shift, change in size or disappear.
Tonight I was working on a few images and two of the images were completely blacked out rectangles! I could see the image fine in the thumbnail view in the layers panel however the viewer was a black rectangle.
Here I made a screencast of the issue: https://www.youtube.com/watch?v=PJGESQMpxJg
Another ongoing issue I'm having... If I'm in Apple mail or another software where I need to attach a file, it sometimes takes up to 30 seconds before the contents of the file can be viewed to attach. I contacted Apple support and they had me reset the System Management Controller. It doesn't happen as often but it still does once in awhile. Since I reset the SMC, now I'm noticing random clicking sounds when opening applications or my MBP does some heavy computing.
I'm not sure if all these issues are software or hardware related.
Any advice would be appreciated!

Startup Disk not there when reinstalling OSX (Early 2013 MBP retina)

I had reinstalled the OSX on my MBP a few times so I am not unfamiliar with the process of rebooting from the boot menu, formatting via the disk utility and then reinstalling either via a backup or from the internet backup (as the retina does not have a dvd drive).
Doing it this time and I did nothing different, however upon entering the disk utility screen, the main disk image simply wasn't there. I was conducting a reinstall of OSX from the internet and had already downloaded the new software, as you have to do when installing from the internet. I then came to the disk utility screen, ready to reformat the hard drive and it simply wasn't there at all. The only image there was the one I had just downloaded ready to install.
Thinking this extremely strange, I reboot the computer and it takes ages, then comes to a screen with a continually flashing folder symbol with a question mark in it. I have left it like this for 30 mins with no change.
So now, I cannot boot normally, and I cannot reinstall a downloaded image on the main SSD because it is not showing at all in the disk utility.
I have plugged in an external hard drive and am currently installing a new image on this to try to check where the main hard drive is once it is up and running, but any help at all would be greatly appreciated.
As mentioned, it is an early 2013 MBP retina, the warranty is up so cannot take it back to apple.

If you live near an Apple Store, make a Genius Bar appointment to have the computer tested. Supposedly there is no charge for testing. Use 2nd link if not near an Apple Store or aren’t in the US.
Genius Bar Reservation US
Authorized Service Provider

Just got a new "late 2013" Macbook Pro Retina, want to install Windows! (Newbie!)

Hello everyone!
I am brand new to the Apple Community and would like to pick at some brains here!
I just recently bought a new "late 2013" Macbook Pro here and would like to run Microsoft OneNote on my macbook. I have 2 predictaments though!
1. Which Windows OS is recommended? I searched around and seem to have found that alot of people are having issues with the Windows 8.1 version. Should I just stick to Windows 7?
2. Also, I know that the Macbook Pro does not have an optical drive; what is the best way to go on about getting the Windows 7 ISO onto a thumbdrive? Would I have to do it through another computer and burn the ISO on the thumbdrive there? Or is there a way to purchase Windows from my Macbook and download from the sellers website and just run Bootcamp to burn the image onto there?
Thank you and I look forward to joining this community!
Don

I am new to the community as well but have been an apple genuis for a while. The way I put windows on my mac (late 2012 pro) last year was I bought windows 7, and used bootcamp to install it. I would have someone at best buy or a tech store do it for you though. If you dont want to pay $200 for windows 7, you can just buy an app called parallels (also at like a best buy) and use that. I believe it is around $75 but not sure. Hope this helps

Difference between late-2012 and early-2013 mbp retina 13"?

I just bought the early-2013 mbp retina from the refurbished section of the mac site.
It seems to be v. difficult to get detailed info on this model. Most web queries about aspects of this model bring up info on the late-2012 model.
Is this some sort of freak model that was a limited run?
One of the main reasons I ask is that I have a 512gb SSD, and I'm looking to replace it with the 768gb SSD module. The SSD module I am looking to buy advertises itself as being compatible with the late-2012, but no mention of early-2013.
The late-2012 and early-2013 share the same model number (A1425), should I assume they carry the same architecture under the hood?
**Before you reply**
- Yes, I know I'm not supposed to open the computer, might void the warranty etc.
- No, I didn't have the option of the 768gb SSD when I bought it, it was already assembled. I got it cheap.
- Yes, I am aware that SSD upgrade is an expensive option.
- Yes, I am aware I can store additional data on an external HDD.
- Yes, I am aware I can boot from a higher capacity external HDD.
- No, I don't want to know about alternative options, just the one outlined in the original query.
Thanks.

didvid.s,
the technical specifications for the two models are here and here. Contrast and compare them to your heart’s content.

Best way to set up two thunderbolt displays and thunderbolt ethernet on a Late 2013 MBP with only 2 thunderbolt ports?

I have a late 2013 MBP with only 2 thunderbolt ports. I want to set up two external displays (both have usb ports on the back but not thunderbolt so I can't daisy-chain) but one of my thunderbolt ports is being taken up by the ethernet adapter. Is it possible to convert one of my displays to plug into my open HDMI slot? Or is it better to use the two thunderbolt ports for the two displays and switch the ethernet to the slower usb adapter?

You can use a HDMI to DVI adapter if the display resolution is not greater than 1920 x 1200.
<http://startech.com/Cables/Audio-Video/HDMI/>
or you could use wireless for your network connection.
<http://www.apple.com/airport-express/>
If you use 5GHz, it should be nearly as fast as Ethernet.

Flash won't install after downloading...early 2013 MBP/Retina, 8GB DDR3 1600 MHz Ram, 3GHz Intel Core i7 Processor (clean installation)

Flash Player won’t install after downloading
On the first attempt to install v14, Flash Player v13 was installed and working fine.
I opened the installation package for the new Flash Player, followed standard protocol for installing Mac software and it hung before retrieving anything.
Subsequently, while watching the beach ball spin, I got an error message that the installer could not retrieve the v13 Flash Player software.
So I uninstalled Flash Player 13 and again attempted to install v14, only to see the spinning beach ball followed by a message that the installer could not retrieve the v14 Flash Player software.
I am running OS X v10.9.4 on an early 2013 MBP/Retina display with 3GHz Intel Core i7 processor and 8GB DDR3 1600 MHz Ram.
If you have any ideas or suggestions regarding my issue, please let me know.
Sincerely.
JWH

Try un-installing and then re-installing via the web site.
Adobe Flash Uninstaller
Adobe Flash Player

New late 2013 MBP Retina not using 802.11ac

Similar Messages

Maybe you are looking for