New LED 24" Cinema - Making Photoshop run all "Herkey Jerkey"?

Just got the new LED display last week, pretty and all but now my 7K setup is running Photoshop slower than my 3 year old's eMac, reeeeally slow and acting as if it were really low on RAM (running 6GB). Now what strikes me as odd is that everything seems to run fine on the second monitor (Wacom Cintiq 21"), no problems of this type other than Photoshop crashing on me a few times, but that's another story. I have switched the videocards the monitors are plugged into, same story. So it does not look like it is the videocards, plenty of RAM and one monitor that runs just fine. At first I thought I would try to adjust the refresh rate on the 24", well there is not a refresh rate adjustment on these apparently. In the past, I would not have thought a monitor could cause all the problems but I am becoming a bit suspicious at this point. Any help or advice would be greatly appreciated because this is driving me bleepin' crazy....thanks in advance.

Update:
So, I just tried the 24" on it's own, works just fine! Why is it that when BOTH the Wacom Cintiq 21" AND the 24" LED Cinema are hooked up that the LED cannot get it together and run Photoshop at a proper speed while the Wacom does just fine? Even more confused at this point.

Similar Messages

  • Using the Macbook with new LED Apple Cinema Display? Not a beginner's Q...

    Hi - I'm sort of cross-posting this because I'm not getting any answers in the Apple Cinema Display Forum, so here goes. So far, no one - not even a tech guy at a local Apple Reseller - has been able to help, so I've got my fingers crossed.
    I just got a 24" Apple LED Cinema Display and am using it with my 13" Aluminum Unibody Macbook. What I do is dock the Macbook (with closed screen) when at home with the big display and just use that. I enlarge program windows and arrange the layout (in different spaces) to take advantage of the large screen and resolution. So far so good.
    But I'm a student and take my macbook with me to class. When I open it up, all the program windows are set as they were on the larger screen, which means some are out of view or simply not well-adjusted for the smaller and lower resolution of the Macbook. I manually adjust these and work on the Macbook that way.
    But when I return home in the evening, I have to adjust them again once I 'dock' the Macbook. Kind of a pain if I'm doing this twice a day.
    What I'd like to know is: is there a setting or group of settings that would do this automatically for me? A program? An AppleScript? Surely someone out there has had the same issues and has found a fix, if such a thing exists. Or is it just a fact of nature one deals with when working on two screens?
    To preclude one response: yes, I know I can mirror the displays when I open the Macbook along with the LED Cinema Display. But this simply mirrors them using the lower resolution and dimensions of the Macbook screen. And that kind of negates having the larger, Cinema Display.
    So - any thoughts? Solutions? How do you guys manage with this?
    Thanks,
    Jeff

    I don't really have a solution for you but wanted to link you to a discussion on this very topic that took place last month on MacInTouch.
    http://www.macintouch.com/readerreports/helpplease/topic3939.html#d24sep2009
    The conclusion seemed to be that it is not an OS issue, it's an application issue. There really was no good answer but some good insight into why the problem exists and why it may not be something Apple can fix.

  • Does the new AppleTV require iTunes to be running all the time?

    The old AppleTV required iTunes to be running if you wanted to stream anything. Does this still apply to the new one?

    I'm pretty sure it wouldn't. You'd be accessing Netflix directly via the net, without iTunes as an intermediary. (Like YouTube.)

  • Any new tips for making Garageband run quicker (Delay/Lag)?

    Hey all
    AI was just wondering if anyone had come up with any new tips for making Garageband run quicker? Theres such a delay form when I move the cursor or press play to when anything actually happens.
    Ive tried everything here
    http://www.bulletsandbones.com/GB/FAQPages/Optimize.html
    But its not really made anything quicker
    I don't know where this option is though?
    Make sure your Energy Saver System Prefs is set to Highest Performance, if this is an option
    I'm not using any effects/plugins (yet) on my song, but will start mixing EQing/using plugins soon so need to try and stop
    It really slowed down when I recorded (and copy pasted) a load of handclaps into it over the entire song and onto multiple tracks.
    I'm running Snow Leopard 10.6.8 3.06GHz Intel Core 2 Duo
    4GB 1067 MHz DDR3
    Ive got 120GB of space left on my 500GB hard drive
    Any ideas or newer tips anyone?
    I'm running 39 tracks by the way.
    Thanks

    bump

  • Will the Intel Iris Pro Graphics 5200 run all Photoshop effects?

    I am lost and cant find a final answer to the following.
    I am about to buy a MacBook Pro and cant decide between the one with dedicated GPU and the one without. I want to go for the one without - the increased battery performance and lack of overheating are favourable.
    BUT... I cant get a deffinate answer to whether the Intel® Iris™ Pro Graphics 5200 on the 4th gen i7 processors (ie the one without the dedicated GPU) will run all these Photoshop effects:
    Adaptive Wide Angle Filter (compatible video card required)
    Liquify (accelerated with compatible video card with 512 MB of VRAM)
    Oil Paint (compatible video card required)
    Warp and Puppet Warp (accelerated with compatible video card)
    Field Blur, Iris Blur, and Tilt/Shift (accelerated with compatible video card supporting OpenCL)
    Lighting Effects Gallery (compatible video card required with 512 MB of VRAM)
    New 3D enhancements (3D features in Photoshop require a compatible video card with 512 MB of VRAM):
    Draggable Shadows
    Ground plane reflections
    Roughness
    On-canvas user interface controls
    Ground plane
    Light widgets on edge of canvas
    IBL (image-based light) controller
    I don't need them to run massively fast, I just need to know if they will work without a dedicated GPU. I appreciate the Intel® Iris™ Pro Graphics 5200 supports open gl/cl but I cant find an idiots proof answer if that means all these features will work.
    HELP!
    Cheers

    We’re not aware of any issues using that specific card with Photoshop and all features should be supported.

  • Adobe Creative Cloud - has anybody had any luck running Adobe CC on a new mac mini? Does it run slow for Photoshop?

    Adobe Creative Cloud - has anybody had any luck running Adobe CC on a new mac mini? Does it run slow for Photoshop?

    Adobe CC applications are very large and the base Mac mini isn't a good choice because it has only 4GB of RAM and has a slow standard hard drive. To get the most out of ACC you should upgrade the mini to at least 8GB. I'd also choose an SSD or Fusion drive for better performance.

  • Need help. I am running a 27 in imac with 16 gigs of ram. Photoshop runs really fast, except when opening files. It takes 5-10 minutes to open even a small file of 1 meg. I cleaned and validated all the fonts and removed all questionable fonts. Reset pref

    Need help. I am running a 27 in imac with 16 gigs of ram. Photoshop runs really fast, except when opening files. It takes 5-10 minutes to open even a small file of 1 meg. I cleaned and validated all the fonts and removed all questionable fonts. Reset preferences and still have problem. Slow to open and in force quit "Photoshop not responding" At this point should I uninstall and start over.

    What are the performance Preferences?

  • My Aperture 2.1 has gone into a continual thumbnail mode.  I left the computer, a MacBook Pro, run all night, about 12 hours and it is still making thumbnails.  I tried reloading Aperture 2.1, but that did not change anything.  I have also turned the syst

    My Aperture 2.1 has gone into a continual thumbnail mode.  I left the computer, a MacBook Pro, run all night, about 12 hours and it is still making thumbnails.  I tried reloading Aperture 2.1, but that did not change anything.  I have also turned the system off, for a period of time, and then turning it back on, when I click on Aperture, it comes up and locks in the thumbnail mode.  I can view my stored pictures, even modify them, but it still says thumbnails.
       I got in this mode by trying to import "one jpeg photo", from a scanned slide using a Nikon Scan4 IS5000ED scanner.  I had saved the scan to my  desktop before I tried to import it.
    Please Help, Maurice A Bird at  [email protected]
    Thanks

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • I have a new iPod Touch and PC running Windows 7. I want to upload pictures from my PC to my iPod. The best I can do right now is to create a new subdirectory on my PC and put all the pictures I want in that subdirectory. I want many subdirectories! ??

    I have a new iPod Touch. I also run Windows 7 on my desktop PC. I have tried to post pictures from my PC to the iPod. But the only way you can do this that I know of, is to create a subdirectory on the PC and put all of your pictures that you want on the iPod in that subdirectory. Then you must use iTunes to synchronize the PC subdirectory with photos on the iPod. But I want many subdirectories to organize my pictures on the iPod. Can you do this??, it doesn't look to me like you can!??
    Thanks Tom

    Yes.
    tomfromlong beech wrote:
    "Remember one one level of subfolders is allowed."  Does this mean that you can have as many subfolders as you want, but they can only be one level deep under the main folder?

  • Hi! I work with Photoshop/Premiere Elements 10 on my snow leopard (10.6.8) without problems since years. Now I want to move over to the new MacBook Pro (and lion 10.7.5) but only Photoshop runs on it, every Premiere version (I downloaded Elements 12 and f

    Hi! I work with Photoshop/Premiere Elements 10 on my snow leopard (10.6.8) without problems since years. Now I want to move over to the new MacBook Pro (and lion 10.7.5) but only Photoshop runs on it, every Premiere version (I downloaded Elements 12 and further more) stops installation and shows Installation ERROR: ASU has quit unexpectedly, Media DB Error: 18. Please help!

    run the cleaner and retry installing per, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • Will my MBA work with the new LED Cinema Display

    I have a first generation MBA, model identifier MBA 1.1, and want to know if my mini display adapter will work with the new LED Cinema Display. I believe I have a micro-DVI that is different from the new MacBooks and MacBook Professional models that have a new Mini DisplayPort. If anyone is using this old MBA to new LED Cinema Display combination please let me know.

    Scott,
    The new display isn't shipping from Apple until some time in November so the only direct feedback you'll get is from anyone that's been to the store and played with the demo unit.
    With that being said, it would appear (based on the system specs and requirements, posted on the site) that the new display requires the new adapter type that's found only on the new MacBook, MacBook Pro and MacBook Air.

  • Will my LED 27 Cinema Display work with the new Mac Pro?

    Will my LED 27 Cinema Display work with the new Mac Pro?

    Mini DisplayPort (like 27" LED Cinema Display) is a direct subset of ThunderBolt (like Mac pro late 2013). It plugs right in and the display portion "just works", no adapters required.

  • New LED Cinema Display calibration

    Will there be any hardware or software differences necessary between the calibration of the currrent LCD models and the new LED model?

    I can say that I am using the same old Eye One calibrator on a CRT, a Cinema Display (CCFL LCD), and a MacBook Pro (LED LCD), so I guess calibrating the new Cinema Display LED LCD should not be a big deal.

  • Itunes will not sync photos to my New iPad, I run all current software. Itunes show 0 photos in all albums and events. Why is this and how do I get iTunes to recognise my photo library?

    itunes will not sync photos to my New iPad, I run all current software. Itunes show 0 photos in all albums and events. Why is this and how do I get iTunes to recognise my photo library?

    Select you device from the left sidebar of iTunes and navigate to the Photos tab at the top. Do you have the Sync Photos With checkbox checked and set to iPhoto?

  • I have a new macbook air, and want to transfer all my data using time machine from my old macbook running leopard, is this possible and easy

    I have a new macbook air, and want to transfer all my data using time machine from my old macbook running leopard, is this possible and easy and will it transfer all my musc and photos?

    The Setup Assistant can restore your data from a Time Machine backup. You'll be asked if you want to do this the first time you turn the computer on.
    (60797)

Maybe you are looking for

  • IBook not staying asleep

    Greetings- I have an iBook come across my workbench that has stumped me and cannot find any relevant information on it via Knowledge Base. It is an iBook G3 32 VRAM and when you shut the lid, it goes to sleep. If you plug in the computer once it is a

  • Delivery is delayed due to schedule line logic

    Hi Experts, I have encounter an issue with schedule line/ availability check logic. We have a sale order# 17111730 Line item# 10 Material# C540H1MG (ordered quantity: 1) Order was created on 06/24/2014 and on that very date  C540H1MG is available on

  • Assigning Applications to Desktops

    How do I assign "non-lion" 100% compatible applications to a Desktop - since Expose/Spaces is gone, I'm trying to assign VMWare to it's OWN desktop, and so far, I can assign Chrome to it's own Desktop by right clicking on it ("Assign to THIS Desktop"

  • Voice Control - does it learn and what's the "Wrong" command for?

    1) Like others, I find Voice Control laughably inaccurate sometimes when trying to get it to play an artist. I'm wondering if it "learns" and gets better the more you use it? 2) In the manual, there's a command you can called "wrong" or "nope". In wh

  • Interpretation of query results (one simple example)

    Hi Gurus, I have one question about the interpretation of query results. Especially for columns and when they are changed / moved in order within the BEx Analyzer. For example I have the following columns: Characteristics: Credit control Area Company