New Lenovo Miix 2 10 camera focus issue

Hello,
I just bought the new version of Miix 2 10 silver with the Intel Atom Z3740 and I found that the main back camera is absolutelly not useable. All pictures are max blur, not focused like on the phones before 8 years. I really do not want to beleive that this device has no camera focus and I will not take any sharp picture. If I take picture from 30cm, 1m or 5 meters all are same and crazy not focused. Any help please? I am really sad.

This is the design problem in Miix. There is foam cushing in the rear cover pressing the camera. Due to the pression, the camera can not focus. You have to remove by you. Lenovo will not do for you. Openning the back cover is much more easier than openning any smartphone. Use a plastic pryer. Use softer foaming to secure the camera!

Similar Messages

Camera focus issues

Hey everyone, does any of you experience focus issues with the xperia z3c while shooting timelapse videos??? I have come across focus issues with my z3c, which causes the rendered timelapse to have a shaky or jittery effect which is really bad. I have never experienced this problem with my old xperia zr, and so i am really disappointed with this z3c in this aspect. Below is a YouTube link which shows what i am trying to emphasize. In the clip you can see the video looks very shaky and jittery because the camera is not focused properly when the photos were taken. Is this a hardware problem or can it be fixed with a software update? https://youtu.be/z9nuOWMvh8w

@dubby
is this the app?
https://play.google.com/store/apps/details?id=com.sukros.timelapse&hl=en
if it is, you will have to contact the app developer, Sukros, regarding this issue.
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

G2 Camera focus issues low lighting

Hello. I go to a lot of music festivals and I like to take pictures of the stage and lighting. I have noticed that my camera goes in and out of focus when I try recording/taking pictures of the stage. It doesnt pick up individual lights on stage, it looks like just a big blob of light. My friend has a galaxy S4 and the camera picks up the seperate lighting just fine. I have tried the different camera modes, different quality and it all is the same. Is a way to fix this, is this a known issue, will there be a resolution for this when I get Kit-Kat?

lnsunshine,
Oh no! We want you to be able to enjoy taking pictures. Thank you for the camera settings provided. What is your brightness set to in the camera settings? Also, what is the "White balance" set on? Have you attempted to reset just the camera settings? Camera>Settings (Gear)>Reset.
LindseyT_VZW
Follow us on Twitter @VZWSupport

New Lenovo x230 Pointer & Keyboard Issues

I just received a new compay issues computer: x230 running Windows Pro 64 bit, Office 2010 and an SSD. Unfortunately, out of the box the pointing devices, either the ultranav or an external mouse and keyboard (MSFT Sculpt), suffer from auto clicking and inability to input text...the text writes over itself...cursor moves forward and then backspaces on itself.
The external keyboard worked fine when tested on other notebooks at home. I did unistall the MSFt keyboard SW on the x230 to see if that made a difference. Nope. My IT team remotely updated all drivers, etc. So, everthing system-wise is up to date. They seemed to have fixed it for about an hour, then it went back to this behavior, including opening multiple instances of applications on its own.
The PC is unusable.
Thoughts?
Halfcalf18

The touchpad is defective. If you have an external mouse, try to disable it (either in BIOS or OS) while you get a replacement.

IOS 5 Camera Focus Issue

Has anyone noticed that ever since updating to iOS 5, the iPhone camera seems to have a much harder time focusing? Before iOS 5, the camera app would usually make very small and quick adjustments to the focus when the picture changes. With iOS 5, the camera frequently goes through the whole focus cycle (goes completely blurry, then refocuses).
This frequent complete refocusing, which takes about a second each time, makes the camera more sluggish than before. I've missed some good shots because the camera is busy focusing.
I've tested the camera on iPhone 3GS, 4, and 4S; all running either iOS 5 or 5.0.1. They all exhibit the same behavior.
Is this behavior intentional/by design, or is Apple planning to address this in a future software update?
Thanks!

There is no indication that the phone is roaming. One is on 3G, the other is on the slower EDGE data connection. They are both connected to Verizon for voice and data.

Lenovo G510 Camera Dark Poor camera Result Issue

Hi
i got new Lenovo G510 last week windows 8 64bit operating system core i3
In its specs it se clearly shown that it have 720 p hd camera but when i opened the camera app from start menu it only shows 0.1MP (4:3) and 0.3 (4:3) option and result is so dark and laggy
I checked the driver in device manger it shows properly installed by this name 'Lenovo Easy Camera" driver details are Microsoft driver version 6.2.9200.16664
i tried to update it from internet but it says its updated
i tried manually install the driver from here " C:\drivers\Camera Driver (AVC, Liteon, Bison, Chicony)" but Warning message pops up " NO APPROPRIATE DRIVER TO B INSTALLED"
Then i tried to install it from her C:\drivers\Camera Driver (AVC, Liteon, Bison, Chicony)\HD\Bison\3.13.301.1
but setup gets "failed" at the end and says "please plugin the device and restart the setup"
PLEASE HELP ME PLEASE

hai13h wrote:
I bought g510 week ago and the camera is terrible black, and blur i tried many drivers many ways but nothing succed... how to fix it!

New Lenovo G570 Teething Issues

Dear Lenovo-connected moderators, outriders and the like (Please note that in error I originally posted this to the other thread):
I just bought in Europe a new Lenovo G570. I have the following issues:
Since I always resize the C: partition I have removed the possibility of using one-key restore. It seems bizarre that Lenovo would force keeping the C: partition at its initial size. Surely it would be possible to write the one-key software to work around repartitioning the HDD. I did the resize of the C: partition immediately after purchase as part of my personal data and program installation and found out later about the requirement not to resize. Moreover, as far as I can recall there was no D: partition already installed, which I might have been able to live with (I prefer multiple data partitions). Any way to fix this problem? For I restored the C: partition to its original size but that didn't help; I couldn't get the recovery DVD's made; the one-key button was non-functional. What do I have to do to get the recovery features back? For I see that for very similar products a fresh install of Win 7 causes all kinds of problems, and in the absence of recovery DVD's that's really the only other option. I should point out that at the moment the computer is working; I'm just trying to do my preventative medicine for the day the computer crashes.
Lenovo's model numbering is very confusing, as is the Lenovo habit of updating system specs on the fly. My model name is 20079; my model number is CB01031166. If I download the current specs for the model from the Lenovo site (just did) they don't agree with what I have. Major differences are that my computer shipped with an Intel i5-2410M processor, a 640 GB HDD and with a separate ATI Graphics Card (Radeon Premium). Thanks, but this leads to issues about driver updates when I search for downloads for my computer on the Lenovo site. In particular, it's not clear to me whether I should be reflashing BIOS with the latest BIOS. On the thread about serious issues with the Idea Pad Z570, I saw recommended the reflashing of the BIOS. You might ask, well why would I go there? Because the Lenovo site does not support searching on models that are not branded Think Pad or Idea Pad. Mine's branded Essentials and it's just not recognized even in the automated search using the Internet Explorer. So searching for Lenovo G570, that's what a Google search turned up and the specs of the Z570 are extremely similar to the G570 I have. So if someone could tell me how to find the driver updates for my model, I'd be very grateful.
I see in the Z570 thread that if the CD is not the first boot priority then the WiFi doesn't work. Does this also apply to my model?
When I boot with an external Sata HDD attached (to see if BIOS will recognize it for boot purposes), the boot procedure freezes until I unplug the Sata HDD. Of course the external HDD is plugged into the USB port. This seems to be a problem with the BIOS, although admittedly I can't recall if the BIOS flash screen shows and it freezes after, or it freezes before it reaches the BIOS flash screen.
I also see that the fan that's always running is actually a serious warranty issue. I hadn't realized that it wasn't some quirk of my software. So here we are with a serious warranty issue. Update: 23/2/12. This does not seem to be a real problem on my machine at the moment. While the fan works more than I would have expected, it will shut down eventually once the computer is not doing anything. Possibly the actual software I'm using on the machine is causing heavy fan use. This is something of a relief.
According to the specs the computer ships with a USB/eSata port. And indeed there is a port in the right place that is different from the other USB ports. The port of course works with USB. However, its shape is not the usual eSatap shape. In particular it doesn't have the cutouts left and right for the usual eSatap jack. Instead it has a cutout at the top. But for the life of me and my dealer, there is nowhere on the Net where we can find an image of the Lenovo USB/eSata port and certainly nowhere where I can buy a jack/adaptor/external SATA disk that fits the Lenovo USB/eSata port.
Here's an image of my USB/eSata port. It's the middle of the three ports. Of course, on the left is something for TV that is irrelevant, and to the right is a normal USB port. How do I find anything to work with it at eSata speeds?
Thanks very much.

Thanks for replying ExJamJus.
I will ask the local reseller, but I suspect they don't know more than anyone else. The problem is that the specs are very fluid on these units--after all, I have a ATI Radeon graphics card whereas the specs typically say that its an integrated (on-the-motherboard) Intel graphics card. Some places, as other users have noted, they do spec it as having an eSata/USB port, but there's just no plug available with that shape with any specification. My technician who sold me the computer thought that the only possibility was that the plug would be introduced later. He'd never seen one and he takes computers apart and fixes them.
As for the drivers, I installed all the drivers. Nothing terrible happened except as follows:
One of the ATI Radeon updates, for Hydravision I believe, comes to an end where kdbsync.exe can't start at boot time because Open.dll is missing. You can follow up on the Internet. The fix is to download Open.dll and put it in the proper folder in Program files. It works now--or at least I don't get an error message at boot time.
This is import for Lenovo: Lenovo energy management upgrade gave me the option to install on top of the old Lenovo energy management but it would require a reboot. So I did it. But what happened was that Lenovo energy management wouldn't start at boot time. I tried repair, no deal. So I had to completely uninstall Lenovo energy management and then do a fresh install. It works now. This is going to irritate people. Bad for business.
It's unclear in some of these cases just what driver is installed on the computer and it's not clear whether the driver installer programs are always coded to check whether the driver being installed is not older than the installed driver. So it makes it a little chancy to download and install a driver that was issued not long before the manufacture date of the product.

Lenovo Miix 2 8 Control panel freezes

Santa recently brought me a fresh Lenovo Miix 2 8 (64 GB). It's been just fine until I realized I can't execute windows update at all. When I go to control panel and try to access windows update, it changes the topic in the control panel window, but doesn't open any windows update settings. The control panel window then freezes and cannot be closed in any way, can't be moved either. The same thing happens when I try to access language settings in control panel. So basically I can't update windows nor tweak language settings, because the window freezes if I try to do so. When I try to access windows update via the new win 8 UI, it won't freeze or crash as far as I remember, but just won't load anything.
Help me out please! I'm not sure if it's lenovo or windows that's to blame but I don't think I'm keeping the device if this can't be fixed. Couldn't find others having similar problems either. This problem occurred basically straight out of the box, which is strange.

Hi,
I had the same error.
After i deinstall the latest drivers (comes with Windows-Update) of 'Intel(R) Imaging Signal Processor 2400' the camera works fine.
You can deinstall the latest drivers in the DeviceManager under ImagingDevice (known so in english?), then properties for driver and 'install previous driver'.
Please tell us when it works again.
Thanks and sorry for my bad english
Matt

My New Lenovo G580 - Blue Screen Error

Hi,
I have bought a new lenovo G580 (Intel B950/2GB/500GB) with DOS (on Friday - 21 Spetember, 2012).
I have installed another 2GB RAM in the extra slot. So, I have a total of 2+2 GB RAM now.
I installed Windows7 in it. It has worked fine for 1 day, but when I installed the G580 bluetooth, wifi drivers, it started crashing with bluescreen creating a dump file. Now I am even unable to start the system. I have formatted the system twice by could not trace it out. I have seen other forums and found out that it is due to some dropbox issues etc., But I have not installed even 1 software. As soon as I installed windows7, I started with the drivers (Drivers DVD came along with my laptop)
Please help me.
Thanks & Regards,
Sudheer K
Solved!
Go to Solution.

Hi Sudheer,
If you are able to open windows go to
Control Panel\All Control Panel Items\Performance Information and Tools\Advanced Tools and select the last option to "generate system health report" .If something is wrong with the system or a service windows will flag it for you. If you are not able to open windows and try opening it in the safe mode(press F8 during startup) check for the same.
Also try opening windows in a clean state
In the System Configuration Utility dialog box, click Selective Startup on the General tab.
Click to clear the Load Startup Items check box.
Note The Use Original Boot.ini check box is unavailable.
Click the Services tab.
Click to select the Hide All Microsoft Services check box.
Click Disable All, and then click OK.
When you are prompted, click Restart.
If this does not cause a BSOD then I would suspect there is a driver conflict/compatiablity in your system.Can you provide the exact error in the BSOD which you see?
Hope this helps
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Should I spend the $280.00 to have Canon fix my 70D auto-focusing issue?

Should I spend the $280.00 to have Canon fix my 70D auto-focusing issue? Or just return back to my very much trusted Rebels?
Solved!
Go to Solution.

MelekalsCanon wrote:
Very much appreciate your taking time to send a response. As a new user I wasn't sure if anyone would bother. Allow me to add a little more to my first post. I fit in that niche between amateur and a person with clients. For over 10 years I have covered events for a non-profit agency capturing the look and feel of 20+ events per year and was given permission to purchase a few cameras over the year. My decision from the beginning was to use the Canon Rebel. Images were spot on and only once did I have an issue with one of them (after shooting outside events in 105 degree temps for 3 days).
So, when I retired a year ago it was for me a pretty simple choice to get a Canon for myself - especially since at that time the 70D was on the cover of magazines and was very highly touted. I also did a lot of desktop publishing and photo editing which helped me realize I wanted the best sensor, sharpness, resolution and lens I could afford - the 70D. My post was actually a result of reading many online responses including your very informative replies about the 70D focusing issues. My biggest concern is that I will spend several hundred dollars and maybe, just maybe get back a camera which captures better focused images, but still not as sharp as the lower end Rebels I was using. I had hoped to purchase my first "L" lens and really get excited - not repair the most expensive camera I've bought to date.
Thanks again and before it gets noted by someone...yes, I should have pushed this issue sooner and then at least the warranty would have covered the cost. An expensivve lesson learned. But I will have to add that at least one authorized Canon repair dealer told me they have had several folks feel like I did - that it was the photographer/me as a new user having the issue and not the camera. I now know it's my camera.
Let me clarify that I don't own a 70D, so anything I say about it is from watching what others have said, mainly in this forum. But it is disconcerting to see so much complaint about a camera that's supposed to have an innovative focusing system. One is strongly tempted to suspect that they went overboard in trying to make the camera serve both still photographers and videographers.
That said, I'm not a great fan of the Rebel line, because they lack autofocus microadjustment and I have at least one otherwise excellent Canon lens that would be useless without it. (The 70D does have AFMA, a point in its favor.)
As far as spending the $280 for the repair, I understand why it's a hard call. If I were in your shoes and were convinced that Canon understands the issue and would fix it correctly and permanently, I guess I'd go for it. If you don't think they do, but fell that you need something a cut above the Rebels, this may be a good time to buy a leftover or refurbished 7D. Even though I now have a 5D3, I still use my 7D's a fair amount and have been very happy with them. And the 7D2 has gotten such a favorable reception that's it's almost bound to make more 7D's available at a decent price.
Bob
Boston, Massachusetts USA

Camera Focus does not work at night nokia x2 2.1....

I found the bug of camer focus in dark on my nokia x2 2.1.0.12 .focus in dark does not work.It works fine on ver 2.0 .when we tap on screen led blinks in ver 2.0 but it doesnot work in ver 2.1.0.12
microsoft really disappointed. Pls give us new update to solve this issue.

After update 2.1 mobile battery drains fasty pls help.. to recover

70d focus issue - admins answers please.

Will you admit that lot of 70d suffering focus issues?
Will you fix it by firmware update? Recall?
It's a big shame that everybody on the net speak about it and waste 1000 dollars and you just ignore us!!
I would like to get some answers please.
Thank you.

I have the same issue. It's odd, I've had the 70d since November-ish. I used to be a '2nd shooter' at weddings w/ just my olf Nikon d5100 & a 50mm 1.8 for portraits, and the kit lens for wides. Total N00b. .I started getting a grasp of things, and my wedding partner decided to double-book a bunch fo weddings. Since he was a Canon user, and I was looking for an upgrade to the 5100, I switched to canon & bought a 70D. Since then he's complained about focus issues, blaming me, and since i'm newer to this gig, took it to heart and assumed it was me. I have a steady hand, and believe to not be any kind of user error - I know how to shoot.
Today I discovered the 50+ pages of forum complaints on http://photography-on-the.net/forum/showthread.php?t=1354075 & the Canon forums http://forums.usa.canon.com/t5/EOS/When-will-canon-fix-the-focus-issues-with-the-70D/td-p/79330/page... - to find out that it might have been the camera all along? I just told the guy to screw off this weekend and quit because obviously I wasn't the photographer he needed... This focus problem hasn't been confirmed for me this week, but shooting w/ Tamron 17-50 2.8 & canon f4L 24-105, sure seems like theyr'e in the range of speculation here...
Will there be an update/recall to fix this?
Today I stumbled across a video (from the canon forums link) showing two photographers describing their issue w/ live view vs viewfinder view, and focusins on the center focal point for lenses 1.4-4.0... this sounds a LOT like my issue and am praying I can find an answer to this without having to call canon and RMA it.

G410 Lenovo Easy Camera Driver : No appropriate driver to be installd.

HI i have this one problem about my camera.
My product is Lenovo G410 and supports Lenovo Easy Camera
The problem is the camera is too dark and has low quality.
but the driver of this camera wont install and gave me a prompt message :
No appropriate driver to be installed.
I tried the BIOS default one but it still doesnt work.
My OS is Windows 8.1
i tried many os drivers for this camera but still wont work.
Please i need a reply as soon as possible.
This is a new product, im planning to send this back to the store where i bought it.
Thank you in advance for your suggestions.
Moderator Note; subject edited

Hi Jarvs,
Welcome to Lenovo Community!
I’m sorry to hear about the situation and understand the concern. As the issue persists even after re-install the OS (Operating System) and drivers, I would strongly suggest you to contact our Technical Support for further Assistance to get the details of the nearest Authorized Service Center to get the issue analyzed.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Lenovo Flex2 15: NetworkManager issue with WiFi in Gnome3 & battery

I've installed Arch on a Lenovo Flex2 15 and most of the things are working nicely. However 1 issue with NetworkManager is driving me nuts.
I have the following system in use:
Gnome 3.14.1 overview:
Memory 7.7GiB
Processor Intel Core i3-4010U CPU @ 1.70GHz x 4
Graphics Intel Hasswell Mobile
Base system Arch Linux 64-bit
Disk 329.0GB
[dennisf@hossman ~]$ uname -a
Linux hossman 3.16.4-1-ARCH #1 SMP PREEMPT Mon Oct 6 08:22:27 CEST 2014 x86_64 GNU/Linux
[dennisf@hossman ~]$ screenfetch
-`
.o+` dennisf@hossman
`ooo/ OS: Arch Linux
`+oooo: Kernel: x86_64 Linux 3.16.4-1-ARCH
`+oooooo: Uptime: 1h 39m
-+oooooo+: Packages: 765
`/:-:++oooo+: Shell: bash 4.3.30
`/++++/+++++++: Resolution: 1920x1080
`/++++++++++++++: WM: GNOME Shell
`/+++ooooooooooooo/` WM Theme: Adwaita
./ooosssso++osssssso+` GTK Theme: Not Found [GTK2], Not Found [GTK3]
.oossssso-````/ossssss+` Icon Theme: Not Found
-osssssso. :ssssssso. Font: Not Found
:osssssss/ osssso+++. CPU: Intel Core i3-4010U CPU @ 1.7GHz
/ossssssss/ +ssssooo/- RAM: 1096MB / 7897MB
`/ossssso+/:- -:/+osssso+-
`+sso+:-` `.-/+oso:
`++:. `-/+/
.` `/
Whenever I connect to a wireless network with the network applet in the top right of the screen, it keeps "connecting" even though it has already connected. This does not happen when I disable WiFi and use the cable. The connected cable icon is show properly.
http://snag.gy/DVj9Z.jpg
I have disabled netctl
$ sudo systemctl disable netctl
How can I make the applet show that the connection has been succesfully established?
Bonus question is that on Windows the laptop can run for hours, but in Arch it's drained considerably faster. I also have a Dell XPS L502x and since Linux was installed the battery died pretty quickly because it drained so fast and we had to charge it constantly. That laptop is left with a 15 minute charge at 100%. The new Lenovo somehow takes 3 hours to charge from 0 to 100% and drains in about the same time. The same applet in the top right also keeps saying "Estimating...". I have installed PowerTOP and ran a diagnostics. Is it save enough to apply everything suggested?
Last edited by InFerYes (2014-10-23 08:43:43)

The Red cross usually appears when the battery has failed.
If you already tried the hard reset and the drivers update, then there doesn't seem to be much that you can do.
Get it repaired from Lenovo while you are still in warranty, that would be my suggestion.
Current System - Lenovo Y510P, GT755M SLI, 8GB RAM, 1TB HDD + 24GB SSD
When your plans fail, your Real Story begins!!

Lenovo T410 Camera Problem in win 8.1

Lenovo T410 Camera is not properly working in win 8.1. At very first instant it will show image and after 6 or 7 seconds of its running image got still view. I've uninstalled cam driver and then install it to check its accuracy but all in vain. Anyone can help me to solve this issue...............
Problem resolution will be highly appreciated...

Hi,
be sure the following drivers/applications are installed:
- Lenovo Power Management drivers
- Lenovo Settings Dependency Package
- Lenovo Dependency Package
- of course, camera drivers
- metro app from ms store - Lenovo Settings
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español

New Lenovo Miix 2 10 camera focus issue

Similar Messages

Maybe you are looking for