New LG DVD writer wont work with XP 32 SP3

I'm experiencing a driver problem while trying to get my new LG DVD writer to work. I have XP (sp3) which uses a Radeon 8500 video card. Nothing I do enables the DVD writer to work. suggestions?

Just because you bought a dvd player/r/r. does not mean it will burn dvd`s. You have to have the driver/software to accomplish this.
Example: I bought a new Memorex cdrom/dvd/writer/rewriter when my old cd rom went out. but it did not come with the software/drivers to actually play or burn /write dvds.
Hope this helps

Similar Messages

What external DVD writer would work with Toshiba LX830?

Trying to connect an external DVD writer to Toshiba LX830 via USB.
Nothing will work - tried 3 writers and different software.
Does it matter that all the writers are USB 2.0 and the 830 is USB 3.0?
The best I've got is to 3%, then it just sits there.
Can anyone recommend an external writer that WILL work with the 830?

Hi
Did you try to connect this external CD/DVD drive to all available USB ports?
As far as I know the Toshiba LX830 All in one computer supports 6 USB ports and two of these USB ports support ultra-fast USB 3.0 standard.
So even if the external USB ODD (optical disk drive) would not support USB 3.0, it should work in connection with the other 4 USB 2.0 ports

MY NEW IPOD DOCK CONECTOR WONT WORK WITH MY NEW U2 IPOD

Hello, I just got home from buying a new Ipod,I bought the U2 20gig,also I bought the Dock conector for color display which the sales woman helped me get,,anyway everything went smothly here at home till I put the U2 on top of the dock and nothing hapened???um is it me or what?what does this mean..USB 2.0 requires Mac v10.3.4 or later I RUN ON WINDOWS.DOES THAT APPLY TO ME? PLEASE I APPRECIATE IT FOR ANY HELP THAT U MIGHT BE ABLE TO GIVE ME..THANKS ...OSCAR

If u could see me,,i keep trying to make it work,i keep putting it on taking it off,looking on the web for ideas....ERRRR WHY ME?????

I bought a new ipad3 packed but after opening its box there are no headsets in it and iphone headsets wont work with iphone so is it normal I mean why there are no heas sets with ipad3 ?

I bought a new ipad3 packed but after opening its box there are no headsets in it and iphone headsets wont work with iphone so is it normal I mean why there are no heas sets with ipad3 ?

Headsets don't come with the iPad. All you get is the iPad, USB cable and wall charger.
Since you're new to iPad ...
You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
 Cheers, Tom

Hi everyone, I have a computer linked to my iPAD through itunes. Then my Computer crashed and had to get a new one. How do I get rid of the old computers link on ipad and get it on new computer bcos is wont work! (doesn't work) PLZ HELP :(

Hi everyone, I have a computer linked to my iPAD through itunes. Then my Computer crashed and had to get a new one. How do I get rid of the old computers link on ipad and get it on new computer bcos is wont work! (doesn't work) PLZ HELP

what do you mean the old computers link?
my ipad is sycned with my computer but nowhere is there a link
and if I connected it with a new computer and set it to sync it would replace all my data with the data from the new computer

Dvd player wont work

When ever i put in a dvd it just ejects it with no message, no nothing. But it will play only certain ones with no problem. What could it be?

i have the same problem...
i have a G4 500mhz AGP mac with an internal CD/DVD player (not burner) and i have an external LaCie CD/DVD burner
i've had NO problem reading disks until just about a week ago.. i had bought a new Graphics DVD and it worked the first time i put it in the DVD player... the second time it would not work... so, i thought i had just bought a faulty DVD, but they replaced it and it still will not work at all..
the DVD will NOT work in my internal DVD player AND it will not work in my LaCie external DVD burner/player...
what i have noticed is that any DVDs i put in will mount as long as they have a silver surface.... if the surface is purple-ish, those are the one's that will not mount
even DVDs that i have burned on the external LaCie DVD burner will not mount in the internal drive OR the external drive...
as i said, all of the DVDs that will not mount are the one's with a purple-ish surface... maybe that has something to do with the problem....

How can I get RAW pictures to open in PSE 12 and PSE 13? I have installed the plugin 8.7.1 but it wont work with either.

What can I do when I have downloaded RAW plugin 8.7.1 and it wont work on either PSE 12 or PSE 13????

Hi I asked a computer engineer to install RAW plug in 8.7.1. on PSE 12 for me, and he couldnt do it either.   I have bought PSE 13 and followed the advise I was given - go to Edit - expert - Help - plugins - RAW - update- and IT WORKS !!!    DW
Original message----
From : [email protected]
Date : 25/01/2015 - 11:53 (GMTST)
To : [email protected]
Subject : How can I get RAW pictures to open in PSE 12 and PSE 13? I have installed the plugin 8.7.1 but it wont work with either.
    How can I get RAW pictures to open in PSE 12 and PSE 13? I have installed the plugin 8.7.1 but it wont work with either.
    created by susanl96972449 in Photoshop Elements - View the full discussion
Hello, I have been experiencing similar problems and followed the suggestion and yes, the raw icon comes up as illustrated but there is nothing there to indicate any further action can be taken. So I am presuming that means it is installed and no further action required?
Here's my problem: I have had no problems getting my pics into my organiser in Elements 12 from either my Nikon D7100 or my Fujifilm X100S - until last week. Suddenly when they are imported all I see is the timer icons but they don't open to let me view them. If I click on one it will open and I can then edit it but it will not save an image onto the grid for me to view so it's really frustrating not being able to view all my photos in order to decide what to edit and compare them.
Here's what action I've taken so far - restarted the computer (endlessly), checked the updates and installed them, checked I have the latest raw plug in (I do) and gone into edit/update thumbnail (doesn't do a thing) - and torn out a fair amount of my hair. So anyone out there experienced this and can give me some advice? Please?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7129439#7129439 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7129439#7129439
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

External isight wont work with imac g4

Hello,
I recently purchased a second hand isight camera using ebay.
I have an older imac g4 and the isight wont work with it at all.
I have scoured the forums on this topic and looked through all of EZ Jim's suggestions but I think my problem is a little bit different.
I'll explain exactly what happens and my troubleshooting so far...
The imac G4 is powered off, I plug in the external isight via firewire 400
The imac boots up into leopard 10.5.8 (using leopard assist)
In system profiler the isight is listed under the firewire tab.
( I can post system profiler info on this if its needed)
When I turn on the camera ichat launches, but then in the video tab it says no camera is connected.
Photobooth just has the no camera sign, but interestingly when ichat is opened photobooth says "camera off"
sometimes photobooth even lets me click the photo button, it counts down but then it doesnt take a picture... obviously!
Skype doesnt work.
I have an imac 24" running snow leopard 10.6.6 .... that also detects the camera but it won't work with any application such as skype or ichat.
I have tried (on my G4) unplugging my usb bluetooth module but nothing changes.
My G4 is connected via ethernet to an external router.
The firewire cable seems ok, I dont have any other firewire devices, but if it was a problem with the BUS or the cable then im guessing it wouldnt show in system profiler.
I am thinking the camera is probably damaged, but before I start a paypal enquiry I would like to see if it is just my computer or a setting i need to change.
(oh I used the application isight updater in core services but the install button is greyed out)
Any help would be amazing!!
Thanks!!!

Well, about all you can do would be to try a different and known good
FireWire cable, as a replacement for what may be a defective FW400
cable that came with the iSight camera. The cable can be defective
with one bad wire, yet sometimes appear available to the computer.
• How to Troubleshoot iSight (note external vs internal)
http://support.apple.com/kb/ht2090
• iMac G5 (iSight), & Intel-based iMac: Using External video camera:
http://support.apple.com/kb/HT2819
If you know of someone with an older Mac without a built-in iSight
camera, to test that one on, this may be an OK idea. Not sure if you
could get any traction by taking the camera to an Apple Specialist
and ask if they could check it out for you; that may also cost you.
{And since your computer does not officially support Leopard 10.5,
the other avenues of support would probably not be open to you.
At least not with the old iMac G4 and an unsupported 10.5 install.}
I have an external iSight camera which was included with my G4 Mini
1.5GHz model, and that appeared to work OK with 10.5.8 at one point.
But I really have no need for it, since I don't use photobooth & so on.
And haven't tried that with my iMac G4 computers at all. No need to.
With a computer not equipped with an iSight camera, the Leopard 10.5
installation should still support the eventual addition of one; even if the
computer itself appears to not officially support a Leopard 10.5 install.
(You refer to Leopard Assist, a means to install in slower CPU Macs.)
The FW cable is about the most easy to consider at this point.
In the course of a year, I've found good replacement cables at
several places, even those at thrift stores in perfect shape, work
and I use them for FW external hard disk drives, primarily. To have
spares is nearly always a good idea. Test & keep known good ones.
I'm not certain how the external iSight FW camera may work on
a newer Intel-based 24" iMac with a built-in iSight camera, too.
Does your 24" computer have FireWire 400+800 ports? Can you
choose an external iSight camera and ignore the built-in one?
These secondary topics have probably been discussed in the other
forum area for Intel-based iMac computer models; if you chose to
try & use that camera with a model computer with one built-in...
• Apple - Support - Discussions: for Intel-based iMac
http://discussions.apple.com/category.jspa?categoryID=189
There is a possibility, if never tried and the iMac G4 computer was
acquired second-hand, that the FW port within it may be band; but
the cable is the first item since it is cheapest, in troubleshooting.
So, anyway, the hour is late here (1AM) so hopefully the matter
can be resolved with a known-good replacement FW400 cable.
You should not have to restart the iMac G4 (800?) model in order
to get a FireWire item to be recognized. It should appear in the
System Profiler's list under FireWire, such as things normally do.
Of course, the camera could be defective as well. Been some
time since they were available on sale, new from Apple...
You could ask around to find out if there is a way to use that
external iSight camera with your newer Intel-based 24" Mac
by someone having it ignore its own built-in camera; in a
way as to not affect its normal operation, that is.
Good luck & happy computing!
+{ edited 2x }+

Could not load the Multiprocessor Support module because it wont work with

Here is a strange error message, there are actually 2.
But they arent making PSE 8 unusable, just very annoying.
Here is the first one,,,,,,,,,
"Could not load the Multiprocessor Support module because it wont work with this version of photoshop."
When I open PSE 8, on my new Intel Mac, I get this message and nobody seems to know what the problem is.
My new Mac has 2 processors? Could that be what the message is saying?
But when I click the error message away, PSE 8 works fine.
There is another one too,
"Could not load the FastCore Routines module because it doest not work with this version of photoshop."
I just click it away and no problem, just a pita.
So if they dont effect it, I shouldnt worry, but my classmates are concerned.
Do you here have any idea what it is, and how to get rid of it?
There is info on the web about it, but no solutions.
Thank you,
Jane

This is interessting, as does my new Mac have 2 processors or 2 cores? I havent come across how this works yet, nor how to find it on my Mac.
Yes, I just found a site which explains it well,
http://macperformanceguide.com/Optimizing-Cores.html
I have one processor with 2 cores.
And the equivalent of the Task Manager is the Activity Monitor, where I see only one processor.
You sure explained this well! I now think we can find the problem, though its not effecting either my PS or PSE, its just an annoying message that I have to click away.
http://kb2.adobe.com/cps/407/kb407809.html
Is what Adobe tells us, this is for Windows, but it could apply to Macs?
I have tons of third party plug ins, and this problem is within the last month, and I didnt see the error messages before. Thats confusing, as I would have thought it would have shown up right from the start.
I just moved some of my plug ins, lets see if this changes anything, nope, but only one message appeared this time.
This will be fun to see what the real answer is! As I find out more, I will add it here.
Thank you,
Jane

Installed Windows 8.1 on my HP Pavillion g7 & DVD player wont work

Hi All , I Installed Windows 8.1 on my HP Pavillion g7 and now my DVD player wont work for some reason, Any thoughts? I tried troubleshooting and it detects that there is a problem with the driverfor USB-IF xHCI USB Host Controller.
Thx,
Gslice
This question was solved.
View Solution.

Hi:
I would try each of resolution steps 2, 3, 4, and 5 at the link below.
One of them may work.
http://support.microsoft.com/kb/314060

Blackmagic intensity wont work with color?!

Hi everybody...
My new blackmagic density card wont wirk with apple color software.
Got preview only in the proces of rendering?!
With others soft works great.
Any ideas?
Tnx.

Hey Koole. I'm thinking about buy this card to use with Color, did you get it to work?
Thanks
KWS

DVD writer stoped working

Hi,if anybody can help me, my DVD writer stoped working in Satellite A135-S2276 jast as I was installing new window vista.

I hope someone has some ideas. I have a Satellite A105-S4334, and the DVD-RW has disappeared from "My Computer". Numerous attempts to reload the driver produces message "Unable to load the driver, it may be corrupted". Replaced hardware , but no change. Also the computer recognizes my thumb drive, but just prompts "load disc". Help!

How do I get my new 27" Thunderbolt Display to work with my mid-2010 Macbook Pro?

How do I get my new 27" Thunderbolt Display to work with my mid-2010 Macbook Pro? Or am I SOL?
Hardware Overview:
Model Name:    MacBook Pro
Model Identifier:    MacBookPro6,1
Processor Name:    Intel Core i7
Processor Speed:    2.8 GHz
Number of Processors:    1
Total Number of Cores:    2
L2 Cache (per Core):    256 KB
L3 Cache:    4 MB
Memory:    8 GB
Processor Interconnect Speed:    4.8 GT/s
Boot ROM Version:    MBP61.0057.B0F
SMC Version (system):    1.57f18

You can't. Theoretically, Thunderbolt devices that only transfer video and audio should work with Mini DisplayPort MacBooks like yours, but it's not the case of the Thunderbolt Display. Its firmware doesn't allow it to be used with non-Thunderbolt Macs, so you can't use the Thunderbolt Display with the Mid 2010 MacBook Pro.
Instead, you have to look for another screen, or you can get an adapter and connect the MacBook Pro to a TV

My DVD write comes up with an error -43. Never done that before. What could be the reason. Please help

My DVD write comes up with an error -43. Never done that before. What could be the reason. Please help

iDVD is not involved in the process at all.
What you want to do is create a data disk on a DVD. That's done by inserting a blank DVD disc in the optical drive, Option+drag the files you want to backup onto the disc icon on the desktop and then drag that icon to the Trash bin in the dock which turns into the Burn feature.
Try that (the Option+drag and see if you can get your files to burn.
OT

I recently got a new computer and it wont sync with my ipod. How can i get my music and stuff on my computer

I recently got a new computer and it wont sync with my ipod. How can i get my music and stuff on my computer?

iPods and other iDevices are not backup or storage devices.
Copy the ENTIRE iTunes folder (and all other desired data) from the old computer to the new computer.

New LG DVD writer wont work with XP 32 SP3

Similar Messages

Maybe you are looking for