New library created - can't access old one

I recently bought an i-phone all going well until downloaded new i-phone software as prompted and now i-tunes opens in a new library that is blank and now I can't access the old library with all my songs in. How do I get the old library back and why did this happen in the first place?

Have a look at this article in the Apple Knowledge Base and let us know if it brings you any combination of joy and/or satisfaction.

Similar Messages

Got New AC Card, Can I Use old one for Bluetooth

OK, the title pretty much sums up my question. I got this ASUS wireless adapter
http://www.asus.com/us/Networking/PCEAC68/gallery/
and a new Nighthawk Netgear router. My question isn't about configuring them, but so far I've not seen BlueTooth mentioned. My computer, an HP Envy 700-216 apparently uses a wireless card, that is a 150 Mb/sec, that also handles the Bluetooth.
So my question is, can I keep the old card in, and somehow configure it to only do the Blue Tooth function in the computer, while allowing my new AC card, to function as the wireless adapter, in "AC" mode? And if so, how do you think I'd accomplish this?
Or should I just remove the other one? Is there a way to deactivate just the wireless portion, without disabling the Bluetooth?
This question was solved.
View Solution.

Hi,
You might run into an IRQ sharing problem with two network cards. I would suggest removing the wireless card and get the AC card working. If you need to pair Bluetooth devices with your PC then consider trying an USB Bluetooth adapter.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

I have a new Mac and I migrated mi old one to this. I can not open iTunes because a message stating "iTunes Library.itl" can not be opened because it was created in more recent version of iTunes. There is not a new version to download.

I have a new Mac and I migrated mi old one to this. I can not open iTunes because a message stating "iTunes Library.itl" can not be opened because it was created in more recent version of iTunes. There is not a new version to download. How can I fix this?

Go to iTunes > about iTunes. What version are you running? If necessary, hold down the option key while starting iTunes and create a new, test library so it will start.

Help! I accidentally added a new library and can't get into my old one!

So we recieved this Passport (a hard drive, like a USB Mass Storage) with a TON of music on it. So I was going through the music, manually clicking-and-dragging each music file I wanted into a folder on the desktop. The folder was underneath iTunes.
As I was dragging a Justin Timberlake song, I accidentally dragged it into the iTunes icon. A window popped up and said something along the lines of: "This something cannot support something and iTunes will need to create a new library. Yes. No." So I pressed yes and continued dragging music files into the folder on my desktop.
Later, as I was transfering the music in the folder to iTunes, I finished and pressed sync. Yet, when I looked on my iPod after the sync, none of the music showed up. So I checked my library and it was a completely new library, with none of my old songs on it--- just the new ones!
So as I frantically fumbled around iTunes for a few hectic hours, all I accomplished was getting all of my old music into the new library, and finding my old library.
During that time, I had pressed iTunes help at one point and it had told me that if there are two libraries in iTunes, you can only view the other libraries songs and videos. So when I go to my old library, the songs (titles, album names, and artists) are faded out (grey-colored instead of black)!
So now I have all my new songs and old songs in the second library and also all the new songs and old songs in a playlist. The only way I can even VIEW my OLD library is by connecting my iPod and viewing the old library while it's faded.
How do I combine them? How do I get rid of the old library and just use the new one? HELP!!!

Try holding down the Shift key in Windows when opening iTunes. In the resulting dialogue you will get the option to create a new library or navigate to an existing one. The default location for your iTunes library is in C:\Documents and Settings\Username\My Documents\My Music\iTunes\ (or C:\Username\Music\iTunes\ in Vista). Look in there and see if you have more than one library file (they have the extension .itl) If you have more than one try opening them in turn, you may find your original library is still intact: How to open an alternate iTunes Library file

I just updated my phone and by mistake made a new apple id. how can i delete the new apple id and use my old one so i can access my apps? thanks

I just updated my iPhone. it prompted me to create an apple id. not being sure i did create a new one. after my phone updated i realized what i did. how can i delete my new apple id and use my old one so i can get my apps? thanks

Go to 'Settings' and 'Store' and then click on the 'Apple ID' and sign out and back in with your correct one.

Since upgrading to 10.8 I've had alot of issues burning DVD's. I've had the drive replaced and now I can burn from a new user account but not the old one. Is there any way of making the old one work?

Since upgrading to 10.8 I've had alot of issues burning DVD's. I've had the drive replaced and now I can burn from a new user account but not the old one. Is there any way of making the old one work?
Just want to avoild spending hours migrating everything across....

Yes, I can read but just can't write DVD's. I get:
This disc can’t be verified and might be unreliable. Try again using a new blank disc (error code 0x80020063).
Originally I thought it was the old Moutain Lion DVD drive issue (but have had the drive recently replaced by Apple), so I tried creating a new account, which worked.
In the old account I have reset SMU, Pram... but no change.

HT5312 If I create a new Apple ID and rescue my old one will I still have all the credit I did on my previous Apple ID ?

If I create a new Apple ID and rescue my old one will I still have all the credit I did on my previous Apple ID ?

You will still have them on the old one i guess

I just bought a new MacBook Air. In my old one, I could go from screen to screen by using three fingers to swipe over the key pad. This one just sits there. It is Yosemite. How do I set up preferences so I can use three fingers to move from screen to

I just bought a new MacBook Air. In my old one, I could go from screen to screen by using three fingers to swipe over the key pad. This one just sits there. It is Yosemite. How do I set up preferences so I can use three fingers to move from screen to screen?

Those choices are controlled via System Preferences, Trackpad.

I have a new iPhone and have kept my old one to play music in another room, when i recently updated my new iPhone it has backed up to my old iPhone and I have therefore lost pictures, messages etc from my new phone how can I get it all back?

I have a new iPhone and have kept my old one to play music in another room. I have recently updated my software on the new iPhone and when it backed up it backed up to the old iPhone, I have therefore lost pictures, messages and apps from my new iPhone as it has backed up to the last session of the old phone, how can I get all my new stuff back and stop it from happening again?

BarnsleyMif wrote:
I have recently updated my software on the new iPhone and when it backed up it backed up to the old iPhone
No such thing has occurred. iPhones do not backup to one another.
It is not possible to backup a different iPhone from the one being updated.
If the iPhone was restored with a backup from a different device, restore it again from the correct backup.
BarnsleyMif wrote:
how can I get all my new stuff back and stop it from happening again?
Pay attention when restoring the iPhone and select the correct backup to restore from.

I need to add a new computer and take off a old one but can't find the site or place to turn it off i can only have two computers but i got three please help let me know where to go to shut one off to put the new one on?

i need to add a new computer and take off a old one but can't find the site or place to turn it off i can only have two computers but i got three please help let me know where to go to shut one off to put the new one on?

Hello,
the way is written there Activation & deactivation help >>> (see there only to understand the procedure) Common activation problems >>> "Activation limit reached for [product]. This serial number has already been activated on 2 computers." "Maximum activations exceeded."
>>> How to deactivate or sign out >>> A single license for Adobe software lets you install the applications on two computers—for example, at home and at the office. However, you can use the software on only one computer at any given time.
If you want to install the software on a third computer, deactivate the software on the computer on which you will no longer use the software. Then, activate the software on the new computer.
Hans-Günter

HT1414 I updated my i phone 4 to the new version but i want the old one how can i have the old one back

I updated my i phone 4 to the new version but i want the old one how can i have the old one back. Thank you

Sorry, Apple has no approved method to downgrade the version of iOS on your iDevice. You can voice your displeasure with the iOS by leaving feedback at the appropriate subsection from the link below.
http://www.apple.com/feedback/

Several html widgets I created contain the javascript libraries. Is there a way to create a common javascript library that can be accessed by all my widgets? I'm trying to reduce the size of the ibook I'mm creating.

Several html widgets I created contain the javascript libraries. Is there a way to create a common javascript library that can be accessed by all my widgets? I'm trying to reduce the size of the ibook I'm creating.

Seen this thread?
Can javascript libraries be shared across widgets?

Create a user that can only access to one schema - please help!!

Hi all,
I want to create one user in a Oracle DB that can only access to one schema. I did the following:
CREATE USER "TEST" PROFILE "DEFAULT"
IDENTIFIED BY "test" DEFAULT TABLESPACE "USERS"
TEMPORARY TABLESPACE "TEMP"
ACCOUNT UNLOCK;
GRANT SELECT ON "TESTDTA"."F0007" TO "TEST"
GRANT "CONNECT" TO "TEST";
I have done a test and the user TEST can access all schemas, when I only gave explicit permissions to the schema TESTDTA.
Any suggestion/clarification???
Many thanks in advance.
Víctor.

Hello Andreas and Pavan,
I have launched the query:
select * from dba_tab_privs
where grantee = 'PUBLIC'
and owner = 'PRODDTA'
and table_name= 'F0009';
And the result:
GRANTEE OWNER TABLE_NAME GRANTOR PRIVILEGE GRA HIE
PUBLIC PRODDTA F0009 PRODDTA ALTER NO NO
PUBLIC PRODDTA F0009 PRODDTA DELETE NO NO
PUBLIC PRODDTA F0009 PRODDTA INDEX NO NO
PUBLIC PRODDTA F0009 PRODDTA INSERT NO NO
PUBLIC PRODDTA F0009 PRODDTA SELECT NO NO
PUBLIC PRODDTA F0009 PRODDTA UPDATE NO NO
PUBLIC PRODDTA F0009 PRODDTA REFERENCES NO NO
PUBLIC PRODDTA F0009 PRODDTA ON COMMIT REFRESH NO NO
PUBLIC PRODDTA F0009 PRODDTA QUERY REWRITE NO NO
PUBLIC PRODDTA F0009 PRODDTA DEBUG NO NO
PUBLIC PRODDTA F0009 PRODDTA FLASHBACK NO NO
11 rows selected.
Then I supose that I have to change the value on column GARANTEE. How can I do that?
Thanks a lot for your help!!
Víctor.

I was told that I can get a discount on a new ipod if i trade the old one in upon sale? true or false?

I was told that I can get a discount on a new ipod if i trade the old one in upon sale? true or false?

You will only get a 10% discount. See:
http://www.apple.com/recycling/

Can't access old ver. 9, 11 & 13 clips after Windows upgrade

In Sept. 2014 I downloaded PE 13 from B&H, worked fine and was able to access old PE9 & PE11 clips. In Dec. 2014 had problems with Wind. 7 Home Ed. and had to upgrade to 8.1 (decided on Pro). Installed 8.1 Pro end of Dec. 2014 and bought PE 13 DVD from B&H to reinstall after I backed up my hard drive. Problem after install of 8/1 Pro and installing PE13 from DVD I can't access and restore old clips from 9, 11 & 13. Tried everything I can think of....any suggestions PLEASE!

Very good, I completely understand. Please understand "I am not a computer geek!"
With the old computer system, you have Premiere Elements 9, 11, and 13 projects. And, you import media into each and see thumbnails for each of your imports in the project media area of the program (in version 11 and 13, called Project Assets). CORRECT! Please as we go forward I have the PE 13 that was downloaded from B&H and worked perfectly with my previous assets in PE 9 & 11.
When you go to open a project in one of these programs and go to the project media area, do the source media thumbnails still show as before with image in the thumbnail? Or does the thumbnail have a display of circular arrows? If the present as before, can you drag the file from the project media area to the Timeline? If you cannot, it that the problem? NO! (First info is when I set up my new PE 13 after copying all data to a 1T desk drive and loaded Windows 8.1 Pro to replace my Windows 7 Home Edition, I set up the PE 13 and used 64 bit as suggested.) NOW...When I locate my previous Project Assets on the 1T drive they show as "red blocks" with a play arrow in them where previously were thumbnails, but I can't retrieve them. As such there is nothing to add to the timeline. Last night I added to the NEW PE 13 a 22 min program I'm working on. I have all those assets, thumbnails and everything is working as wonderfully as it did in 9, 11 and downloaded 13.
Now in response to a previous question you asked:
1. When you open Premiere Elements 13 Expert workspace, go to Publish+Share/Computer/QuickTime, do you see a list of presets when you explore
the Presets" field there? NO.... I can get to /Computer but there is no QuickTime there! I did download QuickTime yesterday after your suggestion.
2. You wrote
Restarted PE13 and received the message "The selected file cannot be played becuse your system does not have the required compresser/decompresser (codec) installed.
Where are you getting the selected file---- from Premiere Elements 13 Expert workspace Project Assets to where it was imported originally from a hard drive save location?
Or other? What is the specific full name of one of these files that is giving the error message?
With everything I've been trying, I'll have to recreate this series of events to answer directly.
When you did the switch from Windows 7 Home to Windows 8.1, did you go 64 bit to 64 bit or 32 bit to 64 bit in operating system? Help me with a way to determine what the bit was on 9 & 11!
Were two separate computers involved or did you manage to change the operating all on one computer? All on one Computer
The major focus for me right now is to make sure I know what file triggers the ".....not have the required compressoer/decompressor (codec)"? And to know that
you are in the Premiere Elements 13 Editor and not the Organizer 13 workspace. Help me understand!!!! I know the difference between "Add Media", "Project Assets", "Organizer", "Editor" and "Workspace". But "Project Assets" and "Workspace" are part of "Editor", so I don't understand your question.
WolcottVideo
    Can't access old ver. 9, 11 & 13 clips after Windows upgrade
    created by A.T. Romano in Premiere Elements - View the full discussion
WolcottVideo (Mike Bruce)
Thanks for the replies.
My communications are in the threads or via Adobe Forums private message. The thread communication is preferred since then all share, and learn.
Please try to reply to the post 4 questions or use the Adobe Forums private message system to send me a private message. To do the latter, click on my Adobe ID at the top of any of my replies in your thread. That should bring up my profile. Click on the orange envelope message icon to the right of what you see in order to set up and send your email to me directly. No one but you and I see the Adobe private message communications.
Here is a basic description of where the details between us need to be confirmed...
With the old computer system, you have Premiere Elements 9, 11, and 13 projects. And, you import media into each and see thumbnails for each of your imports in the project media area of the program (in version 11 and 13, called Project Assets).
When you go to open a project in one of these programs and go to the project media area, do the source media thumbnails still show as before with image in the thumbnail? Or does the thumbnail have a display of circular arrows? If the present as before, can you drag the file from the project media area to the Timeline? If you cannot, it that the problem?
We will be watching for your reply.
ATR
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7087876#7087876 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7087876#7087876
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

New library created - can't access old one

Similar Messages

Maybe you are looking for