New licence and developer access key

Hi all,
i wanted to extend my licence, process is ok but now BCUSER are not registred as a developer, before extending licence it was the case.
How can i do please ?
Regards,

Solution on http://www.sap.com/solutions/netweaver/minisap.epx
Developer license key  : 29671482393151224771

Similar Messages

  • Invalid Developer Access key while editing FM Exit_SAPLRRS0_001

    Hi,
    I want to create a new user exit variable for reporting. I created a proj in CMOD and included the component RSR00001 which
    includes the FM - Exit_SAPLRRS0_001. I try editing the function module, its asking me to enter the Developer Access key. System is not accepting the key which I pass even though there is a proper entry against my id in the table DEVACCESS.
    Any possible solutions

    Hi,
    When you reach the exit EXIT_SAPLRSAP_001, dont try to go in edit mode into it. There would be a Include in it. Double click on this include.
    INCLUDE ZXRS**.
    You would reach this include. Now, go in change mode of this include. It would allow you to go in change mode with your access key.
    If there is no such include inside this function module, then follow the below steps to create a new include.
    What you are trying to do is changing the standard function module EXIT_SAPLRSAP_001. If you want to change any standard objects, you will need specific access keys for these objects based on their Object Directory Entry from your BASIS guys.
    e.g. for EXIT_SAPLRSAP_001 you can find this info from Menu bar-> Goto -> Object Directory Entry.  If your provide this info to BASIS, they would give you unique access key which would work only on this function exit. Then you can change this function exit.
    Edited by: Rahul K Rai on Oct 28, 2010 4:50 PM

  • Developer access key

    Hi there!
    I understand that one needs to be registered as a developer in the system before changing/creating any object.
    However, system prompted me for developer access key when I tried changing some custom program in SE38 and system allowed me to change SAP script form without prompting anything about developer access key.
    Any information on why system never prompted for developer access key when changing SAP script form in SE71?
    G@urav

    Thanks for all the replies!
    Still the question remain same..
    Why system allows to change a custom SAP Script form to a user who is not registered as a developer in the system?
    G@urav

  • Developer access key question

    Hello,
    I am trying to create some domains per a OSS note. the domains are FILE_APPL and FL_EXTN. when I create the first domain, the system prompted me for the developer access key. The BASIS person sent me the key and I entered and created the first domain. I am trying to create the second domain and again it asked me for the developer access key. I typed the same number and I am getting a "incorrect entry" box. when I clicked on the information button, it states that I should only have to enter this key once.
    why does the invalid entry box appear when I am entering the same key?
    why do I have to enter the key again?
    am I doing something wrong in the process?
    thanks in advance for the help

    Basically, if you are referring to a developer key, you only have to enter this once, but if you are referring to an object registration key, then these are specific to each object, which would be the reason why the key doesn't work for the second object.  It appears that the first is ok, so you now need a second object registration key for the second domain,  have your basis person register this object and get the other key.
    Read the dialog carefully, it probably says about registering the object and not entering the developer key.
    Regards,
    Rich Heilman

  • Where to enter developer access key

    Hello gurus,
       By logging on through the OSS login have created developer key. But how to register it with the R/3??? Which is the T-code and what are the steps involved???
    Thanks and Regards,
    Rahul

    Hi Rahul,
    First i  requested you to get in touch with ABAP moulde lead and get confirmation
    mail from customer, then only we can create Developer Access key.
    Procedure explains how to obtain a developer key:
    a) Log into OSS.
    b) Click on the Registration button and then click the Register Developer button.
    c) Select appropriate customer installation.
    d) Enter the user ID in the user box,.
    e) Click on the Register button.
    f) Copy the KEY (by highlighting and using ctrl/c for copy and ctrl/v for paste) and email the user
    of his key. The ctrl/c, ctrl/v ensures that the complete key is copied since it is a very long
    number.
    g) Click the Cancel button when done or click the Register button to register another developer.
    h) Click the green '¬ ' to exit.
    Thanks.

  • How to delete developer access key

    Hi Experts,
    How can i delete developer access key from SAP user,
    Regards

    The user is registered as a developer for a certain system at SAP. I do not know if there is a way for deregistering a user. If the user has a developer role AUTHORIZATION OBJECT, he can enter the key received from SAP. Once entered, it is stored in DEVACCESS.
    Just remove the DEVELOPMENT  AUTHORIZATION OBJECT from the user and the key is useless because it can not be entered again..
    Regards,
    Clemens

  • I bought a new laptop and can access my itunes library but when i try to add purchased playlist songs to my ipod message appears asking if I'm ok with erasing all other songs on the ipod. Help needed.

    I bought a new laptop and can access my itunes library but when i try to add purchased playlist songs to my ipod message appears asking if I'm ok with erasing all other songs on the ipod. How do I add purchased playlist to ipod without erasing existing ipod playlists?

    cujoftw wrote:
    wow ... I get a headache just trying to read what you just said. I went and read how to migrate my library and found that you can only migrate purchased media.
    No, you can easily migrate your entire library from one working compter to another.
    If you fail to backup or migrate your library and find yourself with nothing but a new empty computer and a device full of content iTunes is designed to only recover the iTunes purchased content, however third party tools can help recover everything if needed.
    tt2

  • ABAP developer access key

    How can i get the ABAP developer access key?

    Thanks you all!!
    I tried so many times but i got the error
    Authorization Error!  Currently you do not have authorization to use this function. To request the authorization, please contact one of the administrators at your company:
    Then I reported my administrator, but unfortunately he also got the same Authorization Error!!
    I don't know, the correct way for getting the access key.

  • HT1391 I have a new computer and cannot access my previously purchased music from here. The error message says I need to authorize this computer

    I have a new computer and cannot access my previously purchased music from here. The error message says I need to authorize this computer??

    There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
    The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
    If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
    Then you'll find the control in the Store menu:
    Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them:

  • NSP NW04s - Sneak Preview Developer Access Key -- NOT WORKING !!!!!!

    Folks,
    I have installed the NW04S NSP ABAP system. Everything went fine with the installation. The key which is given in the installation document '29671482393151224771' is not working for developer BCUSER.
    I see many other folks facing the same issue in the forum and I tried all the ways posted in the forum... creating Z and Y program Se38 and tried with SE80, but no luck.
    I would highly appreciate if any one have a crack on this issue. Infact I reinstalled the system thinking there could be a flaw in my fisrt installation... but the result is same.
    Thanks much.
    -Guru

    I tried 00000000000000000000 and that is also NOT working. My trial version is now licensed for 90 days on a Windows XP professional laptop. I do not know if I had the problem before I renewed the INITIAL 4-weeks licence to the 90-day license. 
    Everything else works fine. I can create and run various programs using the trial version. However when I attempted to modify an implementation method in the ABAP class -  BCALV_TREE_EVENT_RECEIVER, I am asked for an Access Key. 
    Is anybody from SAP looking into this? I believe it is clear that there is a problem with Access Key for a number of us. That the default 29671482393151224771 is NOT working for everybody.
    Any help in solving this Access Key issue is greatly appreciated.
    Thanks!

  • Flash and HTML Access Keys/Keyboard Shortcuts

    I have a webpage with embedded Flash. I am attempting to use my HTML Access Keys/Keyboard Shortcuts while in the Flash piece, and it will not work until I exit the Flash. Is this normal behavior, or is there something wrong with my code?
    Perhaps HTML  Access Keys/Keyboard Shortcuts do not operate when the user is in the Flash piece?
    Thanks for the help!    

    Would you mind reposting this question over on the Flash Professional forums (http://adobe.ly/XnCf1)?  This forum is primarily for end users, the Pro forums will get you in touch with a wider developer audience.
    Thanks,
    Chris

  • On bank web site opening a check shows in a new window and cannot access the print capability in Firefox

    When I open a check picture from my bank register it opens in a new window and I cannot print from that window. I want to be able to print to the pdf printer so that I can save a copy of my check to the hard drive. I do not have any access to any printers from this window that Firefox opens. It works fine in Internet Explorer and Google Chrome. Any ideas on how to resollve this?

    There are other things that need your attention.
    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    *Shockwave Flash 10.0 r32
    Update the Flash plugin to the latest version.
    *http://kb.mozillazine.org/Flash
    *http://www.adobe.com/software/flash/about/
    *http://helpx.adobe.com/flash-player.html

  • Can I move 2TB internal HD from old mac to new mac and still access files

    I just upgraded to a new Mac Pro, we have an old G5 Ma Pro thats getting retired. In the old G5 we have an internal 2TB WD drive with all of our customer art files.
    Can I simply pull the HD from the G5 and stick it in the new Intel machine and have access to all of the files and documents on the new machine?

    Yes.
    But I would clone / backup / off load all the files (2x to be safe) and then reformat the drive to new GPT format.
    Your G5 PowerMac and Mac Pro carry different names, a Mac Pro is Intel-only.
    So I'd pick up at least another 2TB WD Black as a minimum, or maybe you already have backups of those files already.
    Your old system of course isn't compatible and should not be installed until reformatted; clean install and update everything, and you will be "stuck" with 10.6.6 as the minimum build (hopefully most things are compatible now).
    http://macperformanceguide.com/

  • About ABAP developer ACCESS KEY

    Hi guys:
       I have installed IDES 4.6c successfully,When I created ABAP program using SE38,system prompted "You are not registered as a
    developer.Please register in the Online Service System (OSS).In the OSS you will receive an access key."
    My question: How can I login OSS?Tcode,Could you please tell me detail operation? thanks

    OSS is not a tcode , check the site  service.sap.com
    consult your basis for that...
    also check the table DEVACCESS for the access key by giving ur user id if there is one already created for u

  • New Catalog and No More Key Words

    I did a bunch of file housekeeping (empty directories erased and some movement of files to other drives. I created a new catalog and imported all the files again. They all came but without their key words. Did I screw up? I still have my old catalog files.

    Tony Reynes wrote:
    Ian,
    Thank you so much for such a simple and clear answer. Can I do a Hybrid where I save the metadata on the files that have not been moved; create a new catalog and then manually apply key words to the files that I have moved?
    Your question indicates you don't really understand how Lightroom stores keywords. By default, the keywords and other metadata are never written to the actual files. So ... moving the files or not has nothing to do with whether or not the metadata will show up on re-import. The metadata should be written to all of your files via Ctrl-A followed by Ctrl-S. And as I said in my earlier post, other information in the LR database will not get written to your files when you do Ctrl-S, and will not wind up in the LR catalog upon re-import. And creating new catalogs and re-importing simply isn't the best way to go. So ... forget this hybrid idea, forget this idea of re-importing, go back to your original catalog before the moves and work with that.

Maybe you are looking for