New line only for to call mobiles phones

Hi to all,
I have one UC320W device on a customer, they have three FXO lines connected on the device. They want to connect one line more to call anly mobiles phones...
They to call anywhere are using the 0 digit and the UC320W assigns a FXO line to this user. In Spain the fixed telephony begins by 9 and the mobile telephony begins by 6. Can I to assign the new line when the user press the 06........????
I have seen in the device that the number buttons can be assigned for some purposes (to external calls, to voice mail, etc..) Can I to assign two or more purposes on one key????
Thanks!!

I've the same problem. My customer has an uc320 with two fixed fxo lines and two lines for mobile. The only way i've found to select the fxo line for mobile calls is by sharing the fxo.
But this is not the solution,
Cisco, dont you have any way (keying number 6, for example,..) for selecting an output fxo line. Can you modify the firmware to allow the uc320 to select the fxo line for doing a mobile to mobile call.
Please, we need a solution !!!
My customer is getting very very very ... better not to say
Waiting for hear from you soon

Similar Messages

I am facing a new problem after a missed call. i phone will get freez on its lock screen after a miss call. Its seems that its main screen touch is not working properly. This problem occurs after each and every missed call.

I'm using iphone 5s with ios 7.1.2 & I am facing a new problem after every missed call. i phone gets freezed on its lock screen. It seems that its main screen touch is not working properly. It should be bug introduced by apple . This problem occurs after each and every missed call .There is no patch announcement for this issue yet. There are few workaround to fix this issue: Reboot your iphone. But its irritating to reboot the phone frequently after each issue....

Hello dipthebe,
Check out the articles below go through troubleshooting steps for your iPhone when the screen is unresponsive. You may want to try and restore your iPhone as a new device and then test out what happens when you miss a call to see if the issue is still present afterwards.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Regards,
-Norm G.

Trying get for Total call mobile it says Adobe to get started

I Am trying. To apply for a Tarik call mobile phone it says I need a Adobe to finish how do I get the appplication

Hi,
What is the operating system of your computer/device?
Are you trying to download and install Adobe Reader for iOS (iPad/iPhone) or something else?

8961 phone having issue receiving and calling mobile phone

Ext XXX is having issue receiving and calling mobile phone. It stated that 'Download Status -Failed' attached is the screenshot of the error in Cisco Unified CM Administration. Any idea where to look into?
If i want to grab the log, should be from Trace & Log Central under CUCM?

Phone goes "offline" for about 7-10 minutes at a time (every couple of hours) usually in the afternoon (near ~60% charge).
In an office most of the day with coverage going from 4 bars to 0 bars every few minutes or so. I never miss or drop a call though given the appearance of erattic signal. RSSI usually -83. EvDO and 1x will flicker on and off througout the day. WiFi is on all the time with WPA2. Bluetooth is on without anything connected. I will sometimes get the issue if I wander out of WiFi range (out for lunch)
Reseting the phone will clear the problem. Toggling the Airplane, WiFi, and Bluetooth on/off dont clear the problem.
I have:
- Exchange calendar setup with owa.mailseat.com (I believe they have Exchange 2003)
- Google standard calendar (personal)
- Google standard shared calendar (wifes)
My wife has a Pre as well and to my knowledge has never had the phone offline problem. (I would certainly hear about it if she did )
She has:
- Google standard calendar (personal)
- Google standard shared calendar (mine)
* No exchage setup.
Message Edited by zonyl on 08-29-2009 07:04 AM
Message Edited by zonyl on 08-29-2009 07:06 AM

How can I add a new line item for production order?

HI all,
How can I add a new line item for production order through BAPI/FM? Thanks in advance.

Hi Mil,
Unfortunetly SAP is not in front of me.
But if possible go to BAPI transaction , check for any production order's bapi for CHANGE purpose. Where you will be able to add your new line.
Reward if useful!

I am using NIPCI6229 card i want to generate 5 V in the digital ouput line . it has to be there in the output line only for 100ms please help me

i am using NIPCI6229 card i want to generate 5 V in the digital ouput line . it has to be there in the output line only for 100ms please help me. aftwer 100ms it has to go to zero state

hi,
You can try generating 5V continously for 100ms in a loop later on you can make it low.
Hope this helps you.

New-line Character for a file opened in BINARY mode for O/P

Can anybody please tell me how to put a new-line charcter for each record in a file opened in Binary mode for O/p. I cant use text mode for other reasons in my scenario.
DATA: l_outdata TYPE xstring.
OPEN DATASET file FOR OUTPUT IN BINARY MODE.
Application logic to populate l_outdata
TRANSFER l_outdata TO file.
Any help, or attempt towards it will be duely rewarded,
Thanks in advance,
Sujit.

hi sujit,
1. how to put a new-line charcter for each record
but how will you decide, at which POSITION,
to put the new line character, if u have opened the file in binary mode.
2. However, if u know the exact positions(s),
u can use CL_ABAP_CHAR_UTILITIES=>CR_LF
to insert the new line character,
regards,
amit m.

New skype app for video calling

Hope this fits here.Is anyone using the new skype app for video calling.
if so how does it work. downloaded the app but it doesn't seem to have a
way to use the video part. it does call out though. thanks for any help.

When you select one of your contacts, an option for a video call should appear with the call and chat options.

Not working call for laptop to mobile phones

hi sar not working UAE to INDIA mobiles call i nied help

I am facing the same problem...When dialing from Windows PC, there is not even a ringing tone. But from Android phones, it gives rining tone only for me and the receiving side actually doesn't receive call itself. I am living in Dubai..Please suggest a soultion for us.

Is i phone 4 video call that you said a face time can only be use for video calling i phone product only

hi, i just want to ask you about your produce i phone 4 for the said face time or vedio calling. can it be used only for same i phone product or all the mobile in the world like nokia and blackberry

ronrico wrote:
as if you are mis leading the consumer......
You aren't addressing Apple here. This is a user-to-user tech support site. Apple doesn't participate here. We are all iPhone users like yourself
There is nothing whatsoever misleading about how FactTime is described by Apple. It works EXACTY as stated. If you are mislead, it's due to your inadequate reading comprehension or lack of effort reading what Apple actually said.
There is no "international" standard for cell phone video calling. Most other phones use proprietary systems or 3rd party apps such as Skype (which also works on iPhones). FaceTime is on WiFi internet connections only because all carriers have refused to allow it on their cell networks due to the huge number of iPhones. The FaceTime standard is open source and other manufacturers are free to implement it, but have refused so far.

Subscription for calling mobile phones

Hi,
Is there a subscription that includes calls to mobile phones? I am particularly interested in calling mobiles in Belgium and in the US.
Thanks

Tamcarmel wrote:
Hi,
Is there a subscription that includes calls to mobile phones? I am particularly interested in calling mobiles in Belgium and in the US.
Thanks
There are some subscriptions that cover calling to mobiles. For example, the Unlimited USA & Canada subscription for US$ 2.99/month covers calling to both landline and mobile phones in both countries. For Belgium, you would not be able to get an "unlimited" subscription that covers calling to mobiles in that country. Skype has some country-specific subscriptions for calling both landlines and mobiles in Belgium, in 3 monthly increments (60, 120, or 400 minutes per month).
You can have multiple subscriptions on a Skype account, which is what you would need to cover calling to mobile phones in the US and Belgium. Click on the "Subscriptions" link below for more details.
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

Fax line used for outgoing calls when incomming fax not coming in?

So is there a way to do this? Can I route the 1 FXO to FXS for incomming calls (and plug fax into FXS) or something like this and then use that line as an outgoing line when not in use?
I don't need step but steps but the basics of how something like this could be configured would be awesome!!!

I'm not sure if I understand. I set this up, so I understand phone systems enough to do this, but I don't really don't know the terminoligy.
Let me back up.
Currently our business has 2 lines and a fax line. Right now the two lines are plugged into 2 FXO ports and the fax line is just plugged into the fax machine--not the UC320. We're in mixed mode, not pbx specifically. We get one or two faxes a day and we send two or 3 faxes a day. We'd like to be able to use the fax line for outgoing calls when it's not being used for fax.
So I need to be able to control the in and the out of the fax line. I need all incomming calls for the fax number routed to what I assume would be the FXS port (with the fax machine plugged into the FXS port), and none of the other lines routed in this way (the other lines would go to the attendant).
Then I need if we send a fax, we need for when the fax machine opens the line for it to automatically be routed to the fax line. Then the fax machine can dial and send faxes. I think we send few enough faxes that we're not too worried about what happens if we try to send a fax and the phone is busy, but it would be nice to be able to look at a phone and tell if the fax line is in use.
I don't really care if the Fax line is part of a shaed FXO, it can be a seperate choice on the phone for making outgoing calls (one of the buttons next to the screen or something).
Is all this possible? Is it only possible in PBX style or is mixed ok?

Unable to call mobile phone numbers - Play mobile network - Poland

Hi, I'm trying to call some mobile phone numbers in Poland and still got answer: "sorry you can not call this number". 2 or 3 months before it wasn't a problem but now seems that it's related only to one mobile network in Poland - Play. Do you have any idea whether they've changed their policy recently? Thank you in advance.

I just contacted Skype support. The issue has been rosolved!!! The CALLER ID must be set up, otherwise PLAY will not accept the calls! I set up my Caller Id and suddenly was able to call all PLAY numbers! Thank you Skype for your efficient technical support!!! SKYPE RULES!!!!!

FaceTime: calling mobile phones. Do I need to pay?

Hi,
I installed Facetime and it works perfectly. My question is regarding payments. When I call from my computer to my mobile phone number... WHO pays the call if I call a normal phone number instead or an email?...
Thanks in advance for the answer,
Iván

Nobody pays. It works over WiFi only, not the voice or data mobile network.

ALV_grid oo: event "data_changed" on F4 in the line only for some fields

Hi all,
when I add a new line in ALV_Grid and I select the search help, for some fields
the event "data_changed" has triggered even I have not finished to fill the entire fields on the line, and I don't need this.
Opposite I have some fields which work fine and when I choose F4 the list of the
possible values has showed without triggering "data_changed".
Does anyboby know how is it possible?
Since I'm new on ALV_grid oo, could you give a detailed answer?
I thank You in advance.
                                                          Best Regards
                                                          Paolo

I solved the problem int this way:
METHODS:
      handle_data_changed
          FOR EVENT data_changed
           OF cl_gui_alv_grid
          IMPORTING er_data_changed
          <u><i>e_onf4</i></u> e_onf4_before e_onf4_after.
METHOD handle_data_changed.
DATA: ls_good      TYPE lvc_s_modi.
error_in_data = space.
IF e_onf4 IS INITIAL.
CALL METHOD check_righe_doppie ( er_data_changed ).
CALL METHOD update_delta_tables ( er_data_changed ).
CALL METHOD semantic_checks     ( er_data_changed ).
ENDIF.
ENDMETHOD.                                  "handle_data_changed
Message was edited by:
        Paolo Cavallini

New line only for to call mobiles phones

Similar Messages

Maybe you are looking for