New Line Space problem with iWeb 3.03

I've just updated to iWeb 3.03.
Now I find that for all new text on my site, the line space is crunched. It looks as normal in iWeb, but then the spacing closes up, on Safari or Firefox. This happens independently of how I space the lines, whether using Line multiples, or as point sizes, whatever. The problem has only occurred since I updated.
Example - the bottom half of this page. I've attempted to update it several times, retyped, reformatted, I have huge line spacing on the iWeb page, but it's still crunched, online.
http://www.trynka.net/trynka.net/Bowie.html

Oh, and I should have mentioned, the site is hosted on a Linux server. The reason I think it's an update issue rather than a server issue is that every existing page, with the earlier version, works fine.
I am guessing I could reinstall the older version of iWeb, but it seems a clunky workround, that's if the older version will open the newer files.

Similar Messages

  • Have published iweb site for five years with no problems and just opened a new site and get - 404: Page not found  This error is generated when there was no web page with the name you specified at the web site.-is the problem with iweb or with hosting?  T

    I am sorry if thie is republished-My first time doing this and I am not sure what goes where and where to hear feedback.
    Have published iweb site for five years with no problems and just opened a new site and get -
    404: Page not found 
    This error is generated when there was no web page with the name you specified at the web site.-
    Troubleshooting suggestions:
    Ensure the page you are linking to exists in the correct folder.
    Check your file name for case sensitivity . Index.htm is not the same as index.htm!
    Temporarily disable any rewrite rules by renaming your .htaccess file if it exists
    is the problem with
    iweb or with hosting?
    One Apple tech started to fix Iweb and had to end session and the next said problem with hosting at Network Solutions as it published
    to local folder. NWS has checked sttting a few times-
    Any help would be extremely appreciated as trying to fix this for about five weeks
    Thanks VG
    <Email Edited by Host>

    It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. (Even though I've now noticed you mis-spelled it! - anyway, never post your address in a forum.)
    You have a site here: http://virginiagordon.com/www.virginiagordon.com/WELCOME.html
    If that's not the page you are having trouble with, what is that page's URL?

  • I originally bought an iMac 17 which crashed. Have now bought a second-hand iMac20. This has less preinstalled software, no iDVD, no iPhoto, Garageband, no iWeb.  Can I use my original discs to restore these options to my new computer? Problems with this?

    I originally bought an iMac 17 which crashed. Have now bought a second-hand iMac20. This has less preinstalled software, no iDVD, no iPhoto, Garageband, no iWeb.  Can I use my original discs to restore these options to my new computer? Problems with this?

    You might be able to depending on the age of the disc and the model of your newer used iMac. Only way to tell is to pop in the DVD and see if you can install the iLife programs.

  • Problem with iWeb 09, after the publication in a local file.

    *Subject: problem with iWeb 09, after the publication in a local file, i can't see my blog, nor my photos, but before that all was working fine.*
    After the publication in the local file, I see all my pages, but there is a mistake on the page "Blog" where I just can see the top of my page, it's cut and I can't see it entirely, so I can't see the inputs while I should see 3 news or 3 inputs. And it's the same for the "Photos" page where the page is cut, I can't see the photos, and it's just written : "Put the slide show and subscribe".To finish, when I want to activate the comments, it doesn't work neither.
    Please help me.

    I want to activate the comments, it doesn't work neither.
    The comments feature is only available when you publish to the MobileMe server, so I don't think you can use it when you publish to a local file.

  • Problems with iWeb, after installing Lion

    Hi,
    Ever since I installed Lion, I have been having problems with iWeb. Any changes I make in iWeb, and then publish to my site, via mobileme, are not saved, and the site reverts to the orignial site, after closing the website, and iWeb also loses the cahnges. I am unable to sue the Publish Site button, and the option for Publish Site changes is not available.
    I am using iLife 11.
    These problems have only occurred since I installed Lion.
    Any help greatly appreciated.
    Nozza

    In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    For opening your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
    tell application "iWeb" to activate
    Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    You can download an already compiled version with this link: iWeb Switch Domain.
    WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.
    OT

  • Problem with iWeb publishing to IE

    Hello, I am experiencing a problem with iWeb '08 publishing content to Internet Explorer. The images and web pages look fine in Safari and in Firefox, but a lot of the web page images are mirrored in IE, covering up large parts of the text. Please don't tell me I have to spend $79.00 on upgrading to iLife '09. I just upgraded my iWorks to '09, but would upgrading to '09 in this instance even be the answer? Please advise. I fear that I will alienating any of my IE web surfers. Any help and advice would be greatly appreciated. Thank you.

    Hello and welcome to the board.
    IE is a terrible browser to render pages made with IWeb (I'm not sure upgrading to ILife 09 will fix your problem).
    I decided to somewhat "alienate" my IE visitor by putting a message on my home page that recommend them to use a compatible browser. Check my page (using IE here: http://www.wesdotphotography.com/Home.html) and look at the message. Also if you use any other browser you will not see my message and will experience a better browsing. It is not the fault of IWeb but more like Microsoft not writing a proper browser. a lot of people will confirm my say.
    Search this forum and you will see a lot of complaints about IE.
    Good luck
    Thierry
    PS: post you website so we can take a look.
    +Disclaimer: I may receive compensation via Google ads if you visit my website.+

  • BAPI_SALESORDER_CHANGE add new line and conditions with a condition value

    Hi,
    I am using BAPI_SALESORDER_CHANGE to add new lines to a credit memo. All works fine except that I can not seem to put a condition value on the new lines. The condition is created but with a value of 0. I can popluate the condition amount field, KBETR but not KWERT. BAPICONDX seems to only have the COND_VALUE field in it and not CONDVALUE as in BAPICOND. Does anyone have any idea how to do this? In the code below I just want to change the material on the first line of the credit memo and not add the condition. Then add new lines with the the condition.
    lw_order_header_inx-updateflag  = 'U'.
      LOOP AT i_accru INTO wa_accru.
        lv_count = lv_count + 1.
        lv_posnr = lv_count * 10.
    * Order Items
        lw_order_item_inx-itm_number = lv_posnr.
        lw_order_item_inx-material   = 'X'.
        IF lv_count = 1.
          lw_order_item_inx-updateflag    = 'U'.
        ELSE.
          lw_order_item_inx-updateflag    = 'I'.
        ENDIF.
        APPEND lw_order_item_inx TO lt_order_item_inx.
        lw_order_item_in-itm_number = lv_posnr.
        lw_order_item_in-material   = wa_accru-vakey.
        APPEND lw_order_item_in TO lt_order_item_in.
    * Conditions
        IF lv_count <> 1.
          lw_conditions_inx-itm_number = lv_posnr.
          lw_conditions_inx-cond_st_no = '905'.
          lw_conditions_inx-cond_count = '01'.
          lw_conditions_inx-cond_type  = 'ZHIE'.
          lw_conditions_inx-currency   = 'X'.
          lw_conditions_inx-updateflag = 'I'.
          APPEND lw_conditions_inx TO lt_conditions_inx.
          lw_conditions_in-itm_number = lv_posnr.
          lw_conditions_in-cond_st_no = '905' .
          lw_conditions_in-cond_count = '01'.
          lw_conditions_in-cond_type  = 'ZHIE'.
          lw_conditions_in-condvalue  = wa_accru-accru.
          lw_conditions_in-currency   = 'GBP'.
          APPEND lw_conditions_in TO lt_conditions_in.
        ENDIF.
      ENDLOOP.
    * Change the credit memo
      CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
        EXPORTING
          salesdocument               = lv_vbeln
          order_header_in             = lw_order_header_in
          order_header_inx            = lw_order_header_inx
    *   SIMULATION                  =
    *   BEHAVE_WHEN_ERROR           = ' '
    *   INT_NUMBER_ASSIGNMENT       = ' '
    *   LOGIC_SWITCH                =
    *   NO_STATUS_BUF_INIT          = ' '
        TABLES
          return                      = lt_return
          order_item_in               = lt_order_item_in
          order_item_inx              = lt_order_item_inx
    *   PARTNERS                    =
    *   PARTNERCHANGES              =
    *   PARTNERADDRESSES            =
    *   ORDER_CFGS_REF              =
    *   ORDER_CFGS_INST             =
    *   ORDER_CFGS_PART_OF          =
    *   ORDER_CFGS_VALUE            =
    *   ORDER_CFGS_BLOB             =
    *   ORDER_CFGS_VK               =
    *   ORDER_CFGS_REFINST          =
    *   SCHEDULE_LINES              =
    *   SCHEDULE_LINESX             =
    *   ORDER_TEXT                  =
    *   ORDER_KEYS                  =
         conditions_in               = lt_conditions_in
         conditions_inx              = lt_conditions_inx
    *   EXTENSIONIN                 =
      IF sy-subrc = 0.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    * EXPORTING
    *   WAIT          =
    * IMPORTING
    *   RETURN        =
      ENDIF.

    Hi Rob,
    Have you managed to solve this issue. If so, could you please share the solution.
    I am also facing similar problem.
    Thanks for your help.
    Anoop

  • Problems with iWeb and mobile me

    Ciao everyone,
    I've been having a ridiculous amount of problems with my mobile me account and my iweb. 2 weeks ago I was fine with my iweb and mobile me but all of a sudden my iweb would say it publish but it really doesn't publish. The I went to the mac store a couple of times and thought I would get answers but I didnt get any answer even though I had a couple of one to one visits with a couple of stores in NYC. So when i publish it it shows that it published in my www.me.com/idisk/iweb folder but then it doesn't show in my website. Then one guy told me that I should just recreate a new site but copy and past all the old information to the new one. Now it won't publish at all because I guess its a lot of information to publish at once. I get an error message saying error iweb was not able to publish please try again later. Any help?

    Hey you guys,
    Thanks for the help, but I did try to publish all to my iweb and it didn't work. I do try to view my published website through the file/visit published site and for some reason only my intro page is there then when i go into the main page i get an error page. I also did go to my finder/Go/idisk/myidisk/iweb/site/iweb and saw my websites folder. Everything seems to be in it. I tried to take a screen shot of what is in my folder but I can't post pictures. In my folder I have a folder for gallery, index.html, site, shites.rss, and my website folder usvisualswebsite
    Any other suggestions? This is really frustrating. I also created another test site with nothing in it and published it and it says it finishes publishing but the blank test page isn't there.

  • Problems with iWeb displays on Firefox and IE

    My iWeb pages look fine on Safari but not on Firefox or IE - both those sites show graphics overlapping text, extra spaces between text, missing boxes etc. My site is theFOWL.org - it's a site for a non-profit library organization. It used to work fine on Firefox and IE but not now. Thanks for any help

    Your site looks OK to me in Firefox. This browser does have a problem with image effects such as drop shadows and there are a few ways to overcome this...
    http://www.iwebformusicians.com/Website-Photos/Preview.html
    http://www.iwebformusicians.com/Website-Photos/Effects-Picturesque-Webify.html
    http://www.iwebformusicians.com/Website-Photos/Stroke-Shadow-Reflection.html
    The main thing with IE is to make sure that none of the text boxes and objects are touching or overlapping by doing a Command A on the iWeb page.
    Other tips aboutb IE...
    http://www.iwebformusicians.com/iWeb/iWeb-Internet-Explorer.html
    and how to make your website more compatible and load faster...
    http://www.iwebformusicians.com/iWeb/Browser-Compatibility.html
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • Problems with iWeb publishing to MobileMe

    Hi,
    Did you have some problems since about four days on publishing with iWeb to MobileMe? In my case, when I publish my site - and I made just little changes - iWeb publish ALL the pages.
    I early had this same problem, this spring, and it was a MobileMe problem; Apple just made a little update to the server and it was ok.
    I'm using iWeb'09
    Thanks

    With a lot of media content have you considered other ways of adding movies or audio tracks that only require you uploading those file manually once and then linking to them. For movies this demo page has one possible method: Opening Item in a New, Precisely Sized Window. This demo page has 7 movies added that way. They don't load until the play button is selected. PhotoPresenter Animated Slideshow Themes
    For audio you can use flash players or a flash jutebox. Roddy's site, iWeb for Musicians, has examples and how-to's for both. See the following pages: Music Players and the following 3 pages after it. See the Next Page button at the bottom.
    I've got a couple of flash players on my demo page: Music Players.
    There are many alternatives to having to load all the media each time you republish.
    OT

  • Help! New 5th gen problem with Software version 1.2.3!

    Just when you thought you havn't heard about enough problems with the new ipod software here comes a weird one. My Ipod still plays songs and the usual stuff. But the timer at the bottom of the screen that tells you how far you are into the song gets off track, slows down, and eventually starts ticking 3 seconds per 1 real second. And ill start hereing glitches and pauses in the music. And its every song it happens. Thanks for the help!

    Hi,
    I had the same problem. I upgraded my 30G to 1.2.2, and everything looked fine. However, when I disconnected my iPod there were no music or video files showing. But the hard drive space showing as Available under Settings>About>Available indicates that the hard rive space for my muic and videos is still being used. I read a lot of posts about 1.2.2 problems and 7.5 upgrade for iTunes being the fix. I would go to the Help tab in iTunes and tell it to check for upgrade, and it would tell me that 7.5 was avialable. I would click yes to download but nothing happened. I tried this many times, with my iPod connected, not connected, rebooting, etc, it was enough to go insane.
    Here is how I solved it. I went to: http://www.apple.com/itunes/download/
    and downloaded the entire iTunes 7.5 instead of the upgrade. After it installed itself, I rebooted, opened iTunes, and connected my iPod, it synced and now it is back to normal. Beware, if you try resetting your iPod, it warns that it will erase the contents of your iPod hard drive.
    I have windows XP, hp laptop, and a 5th gen 30G.
    Hope that helps solve your problem.

  • 2 Problems with iWeb site

    I have been having 2 problems with my iWeb published site on MobileMe.
    1. The Podcast search field does not display correctly - it appears as "two lines", not 1 (ie. the search icon i where it is supposed to be, but the search field is directly below that, not to the side) in Firefox (Mac & PC) and Internet Explorer. Is anyone else experiencing this problem, and if so, how can it be fixed?
    2. I work with video Podcasts, which can result in very large video files (upwards of 200MB each). In Firefox (Mac & PC) and Internet Explorer, the entire video has to load before any other part of the page (description, date, titles, etc.) loads. This usually takes about 15 to 20 minutes, which is way to long. Any advice on how to make the page load before the videos?
    -david

    I have been having 2 problems with my iWeb published site on MobileMe.
    1. The Podcast search field does not display correctly - it appears as "two lines", not 1 (ie. the search icon i where it is supposed to be, but the search field is directly below that, not to the side) in Firefox (Mac & PC) and Internet Explorer. Is anyone else experiencing this problem, and if so, how can it be fixed?
    2. I work with video Podcasts, which can result in very large video files (upwards of 200MB each). In Firefox (Mac & PC) and Internet Explorer, the entire video has to load before any other part of the page (description, date, titles, etc.) loads. This usually takes about 15 to 20 minutes, which is way to long. Any advice on how to make the page load before the videos?
    -david

  • Statcounter problem with iweb

    Hi, I use statcounter on some of my pages. I use iweb and have a .mac account. I usually sync things up from my local idisk. For the last 6 months I had no problem with the counter from statcounter. However, today I noticed that the counters all disappeared. I went and checked my idisk and when I tried opening up the files directly from my idisk with safari.....the counters were all there.
    However, when I go to my page through safari or another browser....for some reason the counters don't appear. I went to the statcounter forum and it turns out that another person has the SAME EXACT problem and it started exactly the same time. Worked fine for her for over a year and the problem emerged today. She also uses iweb.
    Does anyone know why this is happening? I tired turning off local idisk syncing, restarting, and then turning on the local idisk again but it didin't fix the problem. Is there a glitch in iweb or idisk going on? Or did I screw up some sort of html code? Help please!!!

    A good place to start might be to get rid of the local iDisk altogether. Too many extra steps, if you ask me
    There are two ways to handle accessing your iDisk.
    Method 1:
    Turn on local copy of your iDisk in System Prefs, with or without automatic syncing.
    If you publish your site via iWeb, now the updated pages exist online but the old pages are on your local iDisk. You need to sync (automatically or manually) to get the new pages on your local iDisk (on your computer).
    Then you can open the updated files, make your html changes in Text Edit or whatever program, and SYNC AGAIN (automatically or manually) to update the online version of the site to match what you have just changed on your local iDisk
    Method 2:
    Mount the iDisk when needed via the "Go" menu in Finder. This is the ONLINE VERSION of your iDisk, not a local copy. When you publish your site via iWeb, the changes INSTANTLY appear on the iDisk on your desktop. If you make html edits or other changes, they appear INSTANTLY online.
    I recommend Method 2 - much easier!!!

  • Problem with iWeb 1.1 photos solved... for me, at least

    After updating, some of my photo pages were broken. Slideshow wouldn't work and clicking on a photo would not open a larger version. Some pages, however, did work. After hours of trying to figure this all out, I finally narrowed the problem down. If the page had an apostrophe in the title, it was broken (e.g.:Tyler's Party). If it did not, it worked. These titles worked in the earlier version. Simply deleting one punctuation mark magically made the pages work again. If you are having this problem check this or other punctuation in the titles.

    I had the exact same problem and as others have suggested, the apostrophe in the page name could be the culprit of the problem. For me, that was the problem. I had a page named "Dog's day at the beach" and that worked just fine in iWeb 1.0.1. Now with iWeb 1.1, I had to rename is "Dog day at the beach" which luckily has a similar meaning given the context of my photos and when I took it.
    A bit bizarre how such a simple apostrophe could escape Apple's iWeb engineers.
    I hope this will be fixed in a soon-to-come update.

  • Index problems with iweb 09 and ftp uploads

    Hi,
    after several issues with the site i eventually re-built and published with iweb 09's built in ftp.
    The problem i have is that the published site goes in a folder called Site on my server but the index page that redirects to the welcome.html file doesn't direct it to inside the site folder. This means when i navigate to the site it comes up as welcome.html not found on this server.
    I've resorted to filezilla again as when i publish to a local folder and upload it works ok.
    I still want to resolve this as the iweb ftp will publish just the canges so is loads quicker.
    I imagine the only way to resolve this is to change the settings in the iweb site settings page.
    does anyone know if i need to tell iweb a different path other than the server url.
    EG; my url is www.thepaddyproject.co.uk
    iweb put the site on the server ok (www.thepaddyproject.co.uk/Site
    the index page needs to redirect to www.thepaddyproject.co.uk/Site/Welcome.html
    any help appreciated
    Paul

    Posted by me in error.

Maybe you are looking for