New logic board means initialize hard disk?

I'm not very familiar with the process of replacing the logic board. Does this entail initializing the gard drive or can the data be saved? What are the pitfalls of replacing a logic board?
Thank you for your help!

hi - just a guess - but i'd expect that a logic board replacement would require apple to scorch the hard drive so that they can do any local testing w/out any influence from any changes you might have made to the system beforehand.
so, if you're considering sending the machine in, make a complete backup first. do you have an external firewire drive? if so, the application SUper Duper is highly regarded for making a complete backup...
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
AFAIK super duper can also back up to an image file, which could then be written to DVD(s)...
good luck, cheers

Similar Messages

New logic board, and new display, but now completely dead.

Hi guys,
I've got an iBook G3, running 10.3.9.
In December 2006, the logic board failed, so I bought a MacBook, because I didn't have time to be offline waiting weeks for Apple to replace the iBook's logic board.
After much badgering, Apple reluctantly replaced the iBook's logic board under the extended warranty program.
While the iBook was with the Apple repair store, they replaced the display for new as well, even though I didn't ask them to, and even though I wasn't charged for it.
I presume that was because the store discovered that the display was duff enough to be replaced under another extended warranty program.
When I got the "repaired" unit home, with a brand new logic board, and a brand new display, I turned it on, and it seemed to be working fine, so I turned it off, and continued to use my MacBook.
A few weeks ago, the second logic board on my MacBook failed (another long horror story entirely), so I began using the iBook for the first time since it had been "repaired" some six months earlier.
Almost immediately, the iBook began exhibiting a major problem, specifically that I'd be typing away, and suddenly the display would go black.
I could just about see the icons and documents on the screen, but the unit was unusable.
So I pulled restarts, full shutdowns, disk utility, zapped the PRAM, etc, all to no avail.
It seemed to be an intermittent problem.
For example, sometimes, from a cold start, the unit would work for two or three hours until the display went black.
Other times, I'd pull a cold start, and it would go straight to the black display.
By chance, I discovered that if I gave the iBook a shake, the display would come back on.
But then it would go black after a second or two.
And then with another shake, it would come back on for a second or two.
And then it would go black after a second or two.
And then with another shake, it would come back on, sometimes for a couple of hours at a time.
So I figured that it must be a cable which, during the installation of the logic board, and/or the new display, wasn't seated correctly by the technician.
I phoned Apple, and told them about it.
They said that because I had reported the issue beyond 90 days since the logic board had been replaced, it was no longer Apple's problem.
I explained to Apple that I hadn't used the iBook for six months, because I had a MacBook.
After much badgering, Apple has agreed to replace the logic board if it's faulty.
However, Apple has refused to replace the NEW display, even if that's also faulty.
Apple is also insisting that I have to pay all the labor charges.
Meanwhile, I've noticed that the iBook is now incredibly hot.
I mean, the MacBook is infamous for running hot, but this "repaired" iBook makes my MacBook feel like a block of ice by comparison.
I don't remember the iBook running so extremely hot before the "repair."
Which has made me notice that during the last few weeks, I've never heard the iBook's fan come on.
I presume that an iBook has a fan ?
Please confirm.
Therefore, another loose cable ?
Today, the display went black again, as usual.
So I gave the iBook a shake.
But this time, nothing happened.
No display.
No fan.
No hard drive spinning.
Just silent and dead.
What do you reckon, guys ?
Duff logic board ?
And/or duff display ?
And/or duff fan ?
And/or duff cabling by the technician ?
As far as I'm concerned, I don't see why I should have to pay for yet another repair, to correct hardware and/or workmanship which was so bad that after only three weeks of ACTUAL use since the "repair", the unit is now completely dead.
All opinions and advice gratefully received.
With thanks and best wishes,
Michael
London, England

Hi S,
Many thanks for your helpful and swift response.
I agree with you regarding the likelihood that these problems would have surfaced immediately during normal usage, regardless of how much or little time had passed since the repair.
As advised, I will inform Apple Customer Relations UK about the new developments.
Indeed, when I resubmit the iBook, I'll include a print-out of this discussion.
I agree with you about the fan.
Prior to the failure of the first logic board, I ran that iBook for YEARS, without noticing any heat issue.
Indeed, if there had been such incredible heat, then I'd have searched these discussion boards, and reported it to Apple HQ.
Therefore, the astonishing heat is definitely a new development since the "repair."
Consequently, I take on board your comments about the lack of a working fan since the "repair", which I shall also mention to Apple HQ.
As for running the Apple Hardware Test, the unit is completely dead.
The power cable is green, but the unit is now completely silent and black.
I also note your suggestions regarding the cable which connects the display to the rest of the unit, which I shall also mention to Apple HQ.
No repair sheet was ever given to me by the Apple Repair Centre (ARC).
Indeed, no receipt was ever given to me when I delivered the unit to the ARC, nor was any paperwork ever given to me when I collected the unit from the ARC.
However, Apple HQ can see on their screen that the logic board and display were both replaced for new by the ARC.
What else was and wasn't done by the ARC is a mystery.
I'll phone the ARC and ask for copies of any and all paperwork, so that I can submit it all to Apple HQ, which I note is your recommended option, rather than returning the unit to the ARC.
However, the complicating factor is that with the exception of the logic board, it is my understanding that Apple is denying any liability on any part of the "repaired" unit, including the brand new display.
If I understand Apple HQ correctly, they're now saying that all other hardware and labor costs will be mine.
I'm sure I could buy a WORKING second-hand iBook G3 for the same price as a repair, if not cheaper.
Therefore, perhaps I should return the unit to the ARC, and give them the opportunity to correct their previous workmanship, at their OWN cost.
Because as far as I'm concerned, the ARC had two customers during the repair: Apple and the end-user, as evidenced by the fact that the ARC has invoiced its first customer Apple for workmanship which was clearly not up to Apple's own standards, and the ARC has then delivered the unit to its second customer, the end-user.
In addition, regardless of Apple's 90 day warranty on repaired hardware, UK law includes the Sale of Goods Act 1979, and other relevant legislation: http://www.dti.gov.uk/consumers/fact-sheets/page38311.html
Furthermore, if the ARC is completely unhelpful, I could jump all over them, by writing to Apple HQ, with cc's to the UK editions of MacWorld, MacFormat, and MacUser magazines.
As advised, if the unit goes to Apple HQ, I will suggest that the unit is looked at carefully during disassembly, to see if errors were made during the ARC "repair."
I'm always polite when on the phone to Apple, because I love the company so much.
Indeed, even though during the last twelve months, I've been having very bad luck with the iBook, as well as with a MacBook which has exhibited so many problems that Apple has now agreed to replace old for new, I still love my Mac.
And joy, sweet joy, I've just seen on the TNT courier's tracker website, that my replacement MacBook, built by Apple in Singapore, then flown to Arnhem in Germany, then flown to Northampton UK, then delivered to Heathrow UK, left the Heathrow depot 30 minutes ago, for delivery to the customer.
And the sun is shining.
Thank you again for all your kind and wise advice.
With best wishes,
Michael
London, England

Apple installed a new logic board and now iTunes music is all gone and I cannot log into store or authorize my Mac

I have an early 2011 i7 MacBook Pro running OSX 10.9.4. Earlier this week I had Geniuses at the Apple Store install a new logic board to replace a failed one. My hard drive was not touched. Anyway, when I got home and launched iTunes, I discovered that none of the tens of thousands of legally purchased songs in my iTunes library were listed, even though they actually still exist in my Music folder. Additionally, my attempts to login to the iTunes Store with my valid and correct and accurate and current Apple ID with the correct password, did not work. In fact, no errors were generated. The logins simply erased my input after clicking SIGN IN and then the "Sign In" form came back empty.
As a developer and 28+ year user of the Mac, I was a little stunned to say the least. The Apple Store logic board replacement process should take into account iTunes authentication problems when replacing failed logic boards, but this issue was not discussed at all, in any form during the repair intake process. So, I now have a 'fixed' MacBook Pro that will not acknowledge my thousands of legally purchased songs and will not let me log into the iTunes Store with my valid credentials or authorize or de-authorize my Mac.
Indeed, iTunes Match is also disabled, which means $30 thrown away in paid subscription.
Does anyone know a workaround to this Apple flaw that can correct their mistake and re-enable my Mac for using my thousands of legally purchased songs?
Any feedback would be most appreciated!
Thanks,
Larry

Having your main logic board replaced wouldn't erase music from your hard drive, if it was actually stored on the drive. Your iTunes music resides in your user home folder in a folder called Music.
When you do get a logic board replaced, however, it is a good idea to have the computer first de-authorized from iTunes since you are only permitted to associate your iTunes Store account DRM purchases (movies, tv shows, and older digital-rights-managed music) with up to five computers. See Deauthorize your computer using iTunes.
When a new logic board is installed, you'll need to reauthorize the Mac again. It's not the end of the world, however, if this step wasn't initially taken. See Authorize your computer using iTunes.
...As for not seeing your music when you launch iTunes—try point iTunes to the correct location of your iTunes folder. To do this, quit iTunes. Press the option key and click the iTunes icon in the dock. It will then ask you to navigate to the location of your iTunes music (again usually located in the Music folder in your home folder).

Facetime issue - after installing a new logic board due to liquid damage.

I installed a new logic board this week.. after installing the os x operation system and then upgrading it to mavericks and i used migration assistant to load my backuped user from an external disk.
I tried to log in using my apple id ( which is verified) it couldn't log in beacuse "could not sign in. please check your network connection and try again"
and i did all the updates of mavericks. i tried also before installing mavericks i thougt upgrading will fix it..
i saw on forums that i should add 2 DNS's (8888 and 8844) didn't work.
i tried connection to my phones hotspot - didn't work.
i also went to the firewall thing to allow it recieve cennections..
pleassee help!!
is there a way to reinstall the facetime or something?!?!?!

My problem solved could possiblly be your solution: Check to make sure your system serial number is being read by your logic baord. If the tech forgot to reenter the serial number, it's a known issue for Facetime and Messages (apparantly not know enough yet though, no tech bulliten exists on the topic).
I spent several days trouble shooting my inablility to login to my account with Facetime or Messages (other cloud services worked) after upgrading to Mavericks. I went as far as doing a clean install on my hard drive after spending two hours with a baffled mac tech in a retail store and many hours searching the message boards.
I have never had a logic board (or hard drive) replaced on my Macbook Air, but somehow after the Mavericks update the logic board stopped reading the serial number on my system. It took a call to Apple and a ticket opened to engineering to figure this out (after I uploaded log files).
They were puzzled I experienced this without a logic board replacement, but it was indeed the root cause of the facetime and messages apps failing to log in, and said they'd run in to it recently more than once.
Wish I knew how to post this unbiquitously across all the boards for folks to troubleshoot by simply looking at their system info in the Apple menu; Apple scheduled an appointment for me at an Apple genius bar and it was fixed in fifteen minutes.

Time Machine doesn't recognize old sparsebundle after new logic board

Installed new logic board in pre-Isight 20" iMac due to capacitor swelling and kernel panic. I had also erased the internal HD. I was able to restore all my files to internal HD from Time Machine backup on the 1TB Time Capsule. Now I'm trying to back up my restored iMac to Time Capsule, but there is insufficient space. Time Capsule has three sparsebundle files: one for the 20"iMac prior to new logic board, one for a Powerbook, and one for a newer 24"iMac. Time Machine wants to create a new sparsebundle for the restored iMac, but there is not enough room and I would like it use the residing sparsebundle so that I will have backups prior to the point the new logic board was installed. I tried just changing the name of the old IMac Time Capsule sparsebundle file to the new sparsebundle filename that Time Machine creates when attempting backup, but that did not work. Any suggestions?

1. I thought of just deleting the old sparsebundle in order to make room, but it was a less elegant solution because: a) I'd have to do a complete (i.e. lengthy) backup when really only a few things have changed (mostly software updates) since the restore. b)if something should go wrong with that process, then I've lost my backup file to restore the computer. True, I could archive the old sparsebundle to another drive, and then delete it from the time capsule, but somehow I think there should be a quicker, less labor intensive way that doesn't involve bringing in another hard drive.
2. I believe you can restore any Mac with any time machine backup. If you boot from the system disk, go to utilities, and select restore from time machine backup, it then allows you to pick any of the files on the disk that time machine has backed up to. After all, even though Time Machine thinks this is a new computer, the restore that I just did makes it essentially the same computer that I had before the failure of the logic board--the desktop looks exactly the same. BTW, the Apple authorized service center that did the logic board replacement had put a clean version of 10.6 on the internal hard drive, and I was unable to use that system to do the restore--it just hung up. I had to do the restore using my system disk CD (and basically downgrading to system 10.5.8)

Can't get new logic board hint to work

after days of trying to resolve my new logic board problem of my time machine back ups not being recognized through using the terminal as suggested, i am giving up for now. i will keep my external hd and the info on it and just back up my important stuff to dvds for now. Is there any other way to get the info off my external hard drive back up so that it would make sense to my computer with a new logic board. Any program, etc.

I assume you are referring to this mac os x hint
http://www.macosxhints.com/article.php?story=20080128003716101&query=Time%2Bmach ine%2Blogic
You need to know some basic unix knowledge to follow this hint. If you can't make it work there is no other way to do it. there are no programs for that either. you should start a new backup sequence. You can still access your old backups via browse mode. control-click on TM in the dock and choose "browse other TM disks".

Do I need a new logic board?

Hi
I recently acquired a broken 12" ibook G4 1.33GHz which I intend to repair and use as a second home computer. When the machine is booted I get a chime and black screen. That is as far as it gets - it will not even power down properly.
Very occasionally and seemingly randomly it will boot without "cmdopt+OF" to an Open Firmware prompt with an "Illegal Instruction at xxxxxxx" error message. When I continue to try to boot with the "mac-boot" command I eventually get the "No hard drive" screen (with the flashing folder icon). I have already swapped out the broken hard drive that was in there with one I know to work and contain a bootable OSX.
I have tried resetting the PRAM and NVRAM, although I'm not sure it's actually taking effect as I don't get the second chime on the PRAM reset; for what is probably a similar reason none of the boot options seem to work and I can't boot into Open Firmware using cmdopt+OF.
I'm not sure what's left to try. I don't mind getting a new logic board if that's the problem but I would like rule out all other options first. Does anyone have any suggestions?
Thanks in advance

Try booting from the install disk then run Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel, and report if it says anything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
cornelius

Kernel panic.. with new logic board

Hi,
So I recently replaced my logic board after trying EVERYTHING to fix a somewhat frequently occuring kernel panic. Now however.. it has happened again.
Does anyone have any idea what could be causing this? I honestly feel like I've tried everything. Could it be bad RAM? I've changed the hard drive, done a fresh OS X install (perhaps its something in my settings from migrating my old stuff back over?), new logic board.. reset PRAM, every suggestion I could find.
Here is the old discussion before I changed the logic board. https://discussions.apple.com/thread/3902490
Attached the latest crash log.
Interval Since Last Panic Report: 389295 sec
Panics Since Last Report:          2
Anonymous UUID:                    F57DA50B-3111-4118-A66E-A003634B4A5D
Sat Aug 4 20:34:26 2012
panic(cpu 1 caller 0xffffff80002c473a): Kernel trap at 0xffffff80002aaae2, type 13=general protection, registers:
CR0: 0x0000000080010033, CR2: 0x000000000645e000, CR3: 0x000000002fb3d000, CR4: 0x0000000000000660
RAX: 0xffff80000668f000, RBX: 0xffffff801014ce80, RCX: 0xfffeffffffffffff, RDX: 0xffffff801014ce98
RSP: 0xffffff80e7e43200, RBP: 0xffffff80e7e43280, RSI: 0x0000000000000000, RDI: 0x00000000001a13f4
R8: 0x0000000000000000, R9: 0xffffff800cd25000, R10: 0x00000000001b2fff, R11: 0x0000000000000000
R12: 0x8000000000000000, R13: 0x0000000000000000, R14: 0xffffff801014ce80, R15: 0x000000000668f000
RFL: 0x0000000000010246, RIP: 0xffffff80002aaae2, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x000000000645e000, Error code: 0x0000000000000000, Faulting CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff80e7e42eb0 : 0xffffff8000220792
0xffffff80e7e42f30 : 0xffffff80002c473a
0xffffff80e7e430e0 : 0xffffff80002da0cd
0xffffff80e7e43100 : 0xffffff80002aaae2
0xffffff80e7e43280 : 0xffffff80002adbd4
0xffffff80e7e432a0 : 0xffffff800026740e
0xffffff80e7e432d0 : 0xffffff800026804b
0xffffff80e7e436d0 : 0xffffff8000268448
0xffffff80e7e43730 : 0xffffff8000571351
0xffffff80e7e43780 : 0xffffff80002ff905
0xffffff80e7e437d0 : 0xffffff80002ff59e
0xffffff80e7e43810 : 0xffffff8000301996
0xffffff80e7e438a0 : 0xffffff80004ddf0c
0xffffff80e7e43990 : 0xffffff80004fe325
0xffffff80e7e43ae0 : 0xffffff80005010d5
0xffffff80e7e43b40 : 0xffffff800031ccbd
0xffffff80e7e43bb0 : 0xffffff800030b9c8
0xffffff80e7e43da0 : 0xffffff800030bdad
0xffffff80e7e43f60 : 0xffffff80005ccfe8
0xffffff80e7e43fb0 : 0xffffff80002da5e9
BSD process name corresponding to current thread: Google Chrome
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
System model name: MacBookPro5,3 (Mac-F22587C8)
System uptime in nanoseconds: 21950465015381
last loaded kext at 21384906305176: com.apple.filesystems.msdosfs          1.7.1 (addr 0xffffff7f81322000, size 57344)
loaded kexts:
com.bresink.driver.BRESINKx86Monitoring          9.0
com.apple.filesystems.msdosfs          1.7.1
com.apple.driver.AppleUSBCDC          4.1.17
com.apple.filesystems.smbfs          1.7.2
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AudioAUUC          1.59
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleTyMCEDriver          1.0.2d2
com.apple.driver.AGPM          100.12.42
com.apple.driver.AppleHDAHardwareConfigDriver          2.2.0f3
com.apple.driver.AppleHDA          2.2.0f3
com.apple.driver.AppleUpstreamUserClient          3.5.9
com.apple.driver.AppleMCCSControl          1.0.26
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.iokit.IOBluetoothSerialManager          4.0.5f11
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.2.2
com.apple.driver.ACPI_SMC_PlatformPlugin          5.0.0d0
com.apple.driver.AppleLPC          1.5.8
com.apple.driver.AppleMikeyDriver          2.2.0f3
com.apple.driver.AppleMuxControl          3.0.16
com.apple.driver.AppleBacklight          170.1.9
com.apple.GeForce          7.1.8
com.apple.driver.SMCMotionSensor          3.0.2d6
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleSMCLMU          2.0.1d2
com.apple.driver.AppleUSBTCButtons          225.2
com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.5f11
com.apple.driver.AppleUSBTCKeyEventDriver          225.2
com.apple.driver.AppleUSBTCKeyboard          225.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          33
com.apple.driver.AppleIRController          312
com.apple.driver.AppleUSBCardReader          3.0.1
com.apple.iokit.SCSITaskUserClient          3.2.0
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCISerialATAPI          2.0.3
com.apple.iokit.IOAHCIBlockStorage          2.0.3
com.apple.driver.AppleFWOHCI          4.8.9
com.apple.driver.AirPort.Brcm4331          530.4.20
com.apple.driver.AppleUSBHub          4.5.0
com.apple.nvenet          2.0.17
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleAHCIPort          2.3.0
com.apple.driver.AppleUSBOHCI          4.4.5
com.apple.driver.AppleUSBEHCI          4.5.8
com.apple.driver.AppleEFINVRAM          1.5.0
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.6
com.apple.driver.AppleACPIButtons          1.5
com.apple.driver.AppleSMBIOS          1.8
com.apple.driver.AppleACPIEC          1.5
com.apple.driver.AppleAPIC          1.5
com.apple.driver.AppleIntelCPUPowerManagementClient          193.0.0
com.apple.nke.applicationfirewall          3.2.30
com.apple.security.quarantine          1.3
com.apple.driver.AppleIntelCPUPowerManagement          193.0.0
com.apple.driver.DspFuncLib          2.2.0f3
com.apple.iokit.IOSurface          80.0.2
com.apple.iokit.IOSerialFamily          10.0.5
com.apple.iokit.IOAudioFamily          1.8.6fc17
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.ApplePolicyControl          3.0.16
com.apple.driver.IOPlatformPluginLegacy          5.0.0d0
com.apple.driver.IOPlatformPluginFamily          5.1.0d17
com.apple.driver.AppleGraphicsControl          3.0.16
com.apple.driver.AppleBacklightExpert          1.0.3
com.apple.nvidia.nv50hal          7.1.8
com.apple.NVDAResman          7.1.8
com.apple.iokit.IONDRVSupport          2.3.2
com.apple.kext.triggers          1.0
com.apple.iokit.IOFireWireIP          2.2.4
com.apple.driver.AppleSMC          3.1.3d8
com.apple.driver.AppleHDAController          2.2.0f3
com.apple.iokit.IOGraphicsFamily          2.3.2
com.apple.iokit.IOHDAFamily          2.2.0f3
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleFileSystemDriver          13
com.apple.driver.AppleUSBBluetoothHCIController          4.0.5f11
com.apple.iokit.IOBluetoothFamily          4.0.5f11
com.apple.driver.AppleUSBMultitouch          227.1
com.apple.iokit.IOUSBHIDDriver          4.4.5
com.apple.iokit.IOSCSIBlockCommandsDevice          3.2.0
com.apple.iokit.IOUSBMassStorageClass          3.0.1
com.apple.driver.AppleUSBMergeNub          4.5.3
com.apple.driver.AppleUSBComposite          4.5.8
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.2.0
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.7
com.apple.iokit.IOCDStorageFamily          1.7
com.apple.iokit.IOSCSIArchitectureModelFamily          3.2.0
com.apple.iokit.IOFireWireFamily          4.4.5
com.apple.iokit.IO80211Family          420.3
com.apple.iokit.IOUSBUserClient          4.5.8
com.apple.iokit.IONetworkingFamily          2.1
com.apple.iokit.IOAHCIFamily          2.0.8
com.apple.iokit.IOUSBFamily          4.5.8
com.apple.driver.NVSMU          2.2.9
com.apple.driver.AppleEFIRuntime          1.5.0
com.apple.iokit.IOHIDFamily          1.7.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          177.5
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          331.6
com.apple.iokit.IOStorageFamily          1.7.1
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.5
com.apple.iokit.IOPCIFamily          2.6.8
com.apple.iokit.IOACPIFamily          1.4
Model: MacBookPro5,3, BootROM MBP53.00AC.B03, 2 processors, Intel Core 2 Duo, 3.06 GHz, 8 GB, SMC 1.48f2
Graphics: NVIDIA GeForce 9600M GT, NVIDIA GeForce 9600M GT, PCIe, 512 MB
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x393930353432382D3031322E4130304C4620
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x393930353432382D3031322E4130304C4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.198.4.20)
Bluetooth: Version 4.0.5f11, 2 service, 11 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: SAMSUNG HM501II, 500.11 GB
Serial ATA Device: MATSHITADVD-R   UJ-868
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24400000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0x04600000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06110000 / 5
Any help at all or new fixes I could try would be greatly appreciated! Very frustrating!

Cheers - I've run Rember a few times and it hasn't come up with any errors, but I've heard it's not a 100% accurate test. Looks like that's the only thing left it could be!

Time Machine Restore After New Logic Board

Older iMac (2009) had hard drive and logic board replaced. Running latest system (10.10.2) before and after logic board replacement.
When attempting to restore from a Time Machine backup made prior to the new logic board, although the iMac sees the Time Capsule and the "Data" file, attempts to proceed with the restore are met with error message "There was a problem connecting to the server [name of Time Capsule] - contact your administrator."
Any experience with this issue? Anybody successfully perform a restore following a new logic board?
Thanks very much.

I would refer you to visit Pondini's Time Machine FAQ for help with Time Machine and full system restore. It also provides instruction on how to restore a backup from another system or Time Machine backup drive.

Kernel Panics - new logic board less that week old

Having new Kernel panics with new logic board, trying to track down, any help appreciated.
Problem description:
Kernel Panics
EtreCheck version: 2.1.1 (104)
Report generated December 8, 2014 at 3:20:27 PM MST
Hardware Information: ℹ️
MacBook Pro (15-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,2
1 2 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1333 MHz ok
BANK 1/DIMM0
8 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
AMD Radeon HD 6490M - VRAM: 256 MB
Color LCD 1440 x 900
E2351 1920 x 1080 @ 60 Hz
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 3:29:8
Disk Information: ℹ️
Crucial_CT512MX100SSD1 disk0 : (512.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
SSD Drive (disk1) / : 510.74 GB (158.73 GB free)
Core Storage: disk0s2 511.12 GB Online
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Capture One.app
[not loaded] com.Leaf.driver.LeafFwXDriverMatcher (1.2.0d1) [Support]
/Library/Extensions
[not loaded] com.wacom.kext.ftdi (1 - SDK 10.9) [Support]
/System/Library/Extensions
[not loaded] com.wacom.kext.pentablet (5.2.6) [Support]
[not loaded] com.wacom.kext.wacomtablet (6.3.10 - SDK 10.9) [Support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[running] com.adobe.AdobeCreativeCloud.plist [Support]
[not loaded] com.google.keystone.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[invalid?] com.smartlaunch.usbdetection.plist [Support]
[running] com.wacom.pentablet.plist [Support]
[running] com.wacom.wacomtablet.plist [Support]
[running] com.xrite.colormunkid.plist [Support]
[running] com.xrite.device.message.plist [Support]
[loaded] com.xrite.device.softwareupdate.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.bombich.ccc.plist [Support]
[running] com.fxtech.fxlm.plist [Support]
[not loaded] com.google.keystone.daemon.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
[running] com.xrite.device.xrdd.plist [Support]
[loaded] org.cindori.CCAuth.plist [Support]
[loaded] org.cindori.TEAuth.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[running] com.akamai.single-user-client.plist [Support]
User Login Items: ℹ️
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
ColorMunki Photo Tray Application (/Library/Application Support/Colormunki/Photo/Tools/ColorMunki Photo Tray.app)
HazelHelper Application (/Users/[redacted]/Library/PreferencePanes/Hazel.prefPane/Contents/MacOS/HazelH elper.app)
Xmarks for Safari Application (/Applications/Xmarks for Safari.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.2.4.18058 [Support]
nplastpass: Version: 2.0.15 [Support]
JavaPlugin2_NPAPI: Version: Unknown
Default Browser: Version: 600 - SDK 10.10
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.6 - SDK 10.9 [Support]
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Support]
FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 [Support]
AdobePDFViewerNPAPI: Version: 11.0.03 - SDK 10.6 [Support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
Flash Player: Version: 15.0.0.239 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.2.4.18058 [Support]
AdobePDFViewer: Version: 11.0.03 - SDK 10.6 [Support]
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 [Support]
JavaAppletPlugin: Version: Java 8 Update 25 Check version
User internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Support]
FreeScreenSharingPlugin: Version: Unknown - SDK 10.9 [Support]
Picasa: Version: 1.0 - SDK 10.4 [Support]
Safari Extensions: ℹ️
Adguard AdBlocker
SigBOP Gmail Edition
Google Analytics Opt-out Browser Add-on
DuckDuckGo
1Password
AdBlock
ClickToPlugin
3rd Party Preference Panes: ℹ️
Akamai NetSession Preferences [Support]
Flash Player [Support]
Hazel [Support]
Java [Support]
WacomTablet [Support]
Xmarks for Safari [Support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
SSD Drive: Disk size: 510.74 GB Disk used: 352.02 GB
Destinations:
4tb [Local]
Total size: 4.00 TB
Total number of backups: 32
Oldest backup: 2014-09-26 06:32:36 +0000
Last backup: 2014-12-08 17:41:20 +0000
Size of backup disk: Excellent
Backup size 4.00 TB > (Disk size 510.74 GB X 3)
Top Processes by CPU: ℹ️
      9% WindowServer
      1% Google Chrome
      0% fontd
      0% SystemUIServer
      0% xrdd
Top Processes by Memory: ℹ️
223 MB Google Chrome
155 MB mds_stores
137 MB spindump
137 MB Xmarks for Safari
137 MB Google Chrome Helper
Virtual Memory Information: ℹ️
9.82 GB Free RAM
4.42 GB Active RAM
1.25 GB Inactive RAM
1.69 GB Wired RAM
2.41 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 8, 2014, 11:51:56 AM Kernel_2014-12-08-115156_Macs-Rule-6.panic [Details]
Dec 8, 2014, 11:51:53 AM Self test - passed
Dec 6, 2014, 02:34:35 PM AutopanoGiga_2014-12-06-143435_Macs-Rule-6.cpu_resource.diag [Details]
Dec 6, 2014, 02:08:06 PM Photomatix Pro 5_2014-12-06-140806_Macs-Rule-6.cpu_resource.diag [Details]
Dec 5, 2014, 04:51:45 PM Adobe Photoshop Lightroom 5_2014-12-05-165145_Macs-Rule-6.cpu_resource.diag [Details]

Anonymous UUID:       0C1E9F50-EC2F-D1F5-C7D4-4F126814B484
Mon Dec 8 11:51:56 2014
*** Panic Report ***
panic(cpu 1 caller 0xffffff800b5c4594): "launchd died\nState at Last Exception:\n\n"@/SourceCache/xnu/xnu-2782.1.97/bsd/kern/kern_exit.c:361
Backtrace (CPU 1), Frame : Return Address
0xffffff81f554be50 : 0xffffff800b13a811
0xffffff81f554bed0 : 0xffffff800b5c4594
0xffffff81f554bf40 : 0xffffff800b5c425c
0xffffff81f554bf50 : 0xffffff800b64dcb2
0xffffff81f554bfb0 : 0xffffff800b23ac46
BSD process name corresponding to current thread: launchd
Boot args: kext-dev-mode=1
Mac OS version:
14B25
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide:     0x000000000ae00000
Kernel text base: 0xffffff800b000000
__HIB text base: 0xffffff800af00000
System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
System uptime in nanoseconds: 87870352045366
last loaded kext at 79021054039689: com.apple.driver.AppleUSBCDC 4.2.2b5 (addr 0xffffff7f8e3d0000, size 20480)
last unloaded kext at 79081670086473: com.apple.driver.AppleUSBCDC 4.2.2b5 (addr 0xffffff7f8e3d0000, size 16384)
loaded kexts:
com.apple.driver.AppleBluetoothMultitouch 85.3
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.14.37
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.iokit.IOBluetoothSerialManager 4.3.1f2
com.apple.driver.AppleMikeyDriver 267.0
com.apple.driver.AppleHDA 267.0
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.kext.AMDFramebuffer 1.2.8
com.apple.driver.AppleIntelHD3000Graphics 10.0.0
com.apple.AMDRadeonX3000 1.2.8
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.AppleMuxControl 3.7.21
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.1f2
com.apple.kext.AMD6000Controller 1.2.8
com.apple.driver.AppleMCCSControl 1.2.10
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleIntelSNBGraphicsFB 10.0.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleHV 1
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 327.5
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.7.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.5
com.apple.driver.AirPort.Brcm4331 800.20.24
com.apple.driver.AppleUSBHub 705.4.1
com.apple.driver.AppleSDXC 1.6.5
com.apple.iokit.AppleBCM5701Ethernet 10.1.2b3
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.driver.AppleAHCIPort 3.0.7
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.0
com.apple.iokit.IOUSBMassStorageClass 3.7.0
com.apple.driver.AppleBluetoothHIDKeyboard 175.5
com.apple.driver.AppleHIDKeyboard 175.5
com.apple.driver.IOBluetoothHIDDriver 4.3.1f2
com.apple.driver.AppleMultitouchDriver 260.30
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 11
com.apple.driver.DspFuncLib 267.0
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOAudioFamily 200.6
com.apple.vecLib.kext 1.2.0
com.apple.iokit.IOAcceleratorFamily2 156.4
com.apple.iokit.IOSurface 97
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleGraphicsControl 3.7.21
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.1f2
com.apple.iokit.IOBluetoothFamily 4.3.1f2
com.apple.kext.AMDSupport 1.2.8
com.apple.AppleGraphicsDeviceControl 3.7.21
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleHDAController 267.0
com.apple.iokit.IOHDAFamily 267.0
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.IOPlatformPluginFamily 5.8.0d49
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.driver.AppleUSBMultitouch 245.2
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.driver.CoreStorage 471
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
com.apple.driver.AppleThunderboltNHI 3.1.7
com.apple.iokit.IOThunderboltFamily 4.2.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.0
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.iokit.IO80211Family 700.52
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOFireWireFamily 4.5.6
com.apple.iokit.IOAHCIFamily 2.7.0
com.apple.iokit.IOUSBFamily 705.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 389.1
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.Libm 1
com.apple.kec.pthread 1
Model: MacBookPro8,2, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2 GHz, 16 GB, SMC 1.69f4
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Graphics: AMD Radeon HD 6490M, AMD Radeon HD 6490M, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1333 MHz, 0x859B, 0x435438473353313333394D2E4D3136464552
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1333 MHz, 0x859B, 0x435438473353313333394D2E4D3136464552
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.24)
Bluetooth: Version 4.3.1f2 15015, 3 services, 27 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Crucial_CT512MX100SSD1, 512.11 GB
Serial ATA Device: MATSHITADVD-R   UJ-8A8
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Hub
USB Device: IR Receiver
Thunderbolt Bus: MacBook Pro, Apple Inc., 22.1

Will time machine do a full backup of external volume (extra storage) after new logic board?

I have a MacBook Pro running leopard, that just had the logic board replaced. I haven't picked it up yet, but I am told that my hard drive and data were not touched.
I have read Pondini's very helpfull info/site, so I know that time machine will want to start a new set of backups.
Here is my question, based on my setup: in addition to the internal HD, I have a firewire drive for additional storage of files. Time machine backs up both volumes to another, larger, FireWire drive
Now, after the new logic board, will time machine make a whole new copy of the external storage drive as well as the internal? Or just the internal?
Basically, I know time machine will think it's on a new machine, but will it treat the external storage as if it were new as well?
I would appreciate any help or advice you can give me. Thanks.

Still no answer? I do have the same trouble on my iMac G5 PPC with 10.5.8: I just replaced the MOB and Time Machine insists to create a new bkup! Attempted with "tmutil" command but doesn't work on my OS...it is really impossible to tell the machine to learn the new address? I DON'T want to believe it!
Tks for any help

Can applecare be extended with new logic board

My Imac is with apple having a new logic board fitted for the second time and before that they replaced the computer. Since my cover runs out in August 09 has apple been known to extend the cover when replacing the logic boards, if so how do you go about it.

If your iMac is still less than a year old, you can purchase the extended AppleCare out-of-pocket. If you already have an extended warranty, then you can no longer extend it any further.
Technically, replacement parts (such as a logic board) can have longer warranties than the rest of the computer. This is because replacement parts are covered by either a 90-day warranty, or the remainder of the limited/extended warranty, whichever is longer. This means that if you had a logic board installed on the last day of your warranty, the logic board would still be under warranty for another three months even after the computer's warranty had expired.

New logic board, still boot problems with Turbo Fans

I bought a 2Ghz dual G5 from a guy on craigslist and he told me that the Geniuses at the Apple Store said it had a bad logic board. So I bought a brand new logic board from DVwarehouse.com, and installed it along with a new set of matched RAM from Crucial, a new HD, new PRAM battery, new video card and a new superdrive. The only thing original are the processors and power supply (and fans, of course).
When I start it up, after the chime it quickly goes into "turbo-fan mode", which I have read that means the Op Sys didn't load correctly. Many restarts later, I was able to reset the nvram in the Open Firmware, but that didn't seem to help at all. I also pressed the SMU button (according to Apple's directions), but that didn't help much either.
I've had a few successful boots, but always with the fans going full blast. I though that once I got Leopard loaded onto the HD, then it would calm down with a software update. But before I ever get that far, the G5 hangs. Sometimes the G5 will boot and access the HD but hangs soon after. Sometimes I can get it to boot off the Leopard DVD. But most of the time it just boots and sits there slowly spinning up the fans into turbo mode.
The few times it has booted to access the HD or DVD, the fans go turbo right away. Other times it will boot with a chime, but then it won't access the HD or DVD and I get noting on the display.
I should say that this behavior is almost identical to how it was acting before I replaced the logic board. But how can that be? It should be a new computer, unless the problem is in the CPUs. Is that very likely? How would I find out if the CPUs are bad?
I've been reading alot about the problems I'm having with this G5 and what I've been having seems to be very common. But I've run out of fixes. Is there anything I can do to fix this machine or is it just money down the drain?

my iMac 20" G5 experience since December 2004, even though I love this machine,it has gone through 3 power supply (661-3350) replacements and 3 logic board replacement since late 2004. Pretty crazy for a single machine but I still love it. The last logic board replacement did NOT fix my boot up problem, as I expected, and the genius finally agreed to replace the power supply and that fixed it. SO: My recommendation to you is "replaced the power supply" here is one place you can get one: http://www.dvwarehouse.com/Power-supply-180W-for-iMac-G5-20--100v-661-3350---614 -0353-----NEW-p-25613.html

Is a new logic board revision confirmed? How to recognize it?

I have seen a lot of talk about a new logic board, and some sort of photo of a paper someone got describing that it required 1.0.4.6...
Is this really a new revision (which then fixes the whine and heat)?
How do you recognize it? I mean, does it have a name, or what do I tell the tech guys at my local service center here in Sweden?
Apple surely must have some stock of spare older logic boards left, and I really want to make sure that I won't receive one of those when I take my MBP in for service.

If your computer is still whining, then yes, you may absolutely be able to get your logic board replaced again. Your logic board was replaced once on March 29th but, as I now too can confirm, Apple released an even newer, revised logic board for the MacBook Pros during the last week of June.
If you are still experiencing the whine, call up AppleCare and simply be persistent and ask for a logic board replacement. If they say they don't know what you're talking about, simply tell them to look it up, as this is what I had to do. Once my Product Specialist sent an "escalation" to Engineering, he called me back within 2 business days and was able to directly confirm that there was a new logic board released recently, and we arranged to have my MBP sent in. And don't worry that your logic board was already replaced once. Mine too was replaced even more recently (end of May), but being as though this revision is very recent, it didn't matter. Just be polite but insist on getting a new logic board.
I however am still waiting on its return to verify whether or not my whine is gone. Turnaround time was amazing; MBP shipped overnight (over Thursday night, that is) and arrived at the repair depot yesterday morning and is on its way back to me as we speak! I should be able to report back on Monday afternoon...

Does the new logic board in the macbook 13 fit the 2010 model

hey everyone, it would be great if i could find an answer to this and i think it might be negative, but it's worth a shot.
i was wondering if the logic board on the i5 or i7 on the macbook pro would be able to fit on the 2010 model of the macbook pro.
Currently I'm running the latest version of lion which is 10.7.2 with a 2.66 GHz Intel Core 2 Duo and 8 gigs of ram. I just upgraded the ram because even with just basic processing it was running more than max capacity with 4 gigs. To me that's absolutely insane seeing as that it was just resting.
I understand that the new logic board has the thunderbolt capability and that that port would be inaccessable to the current outfit that my body has as of right now.
I guess I'm just wondering if the board would still line up with the 2010 macbook pro model as far as the USB and other ports go.
p.s. if the apple community could rise up maybe and tell apple to release a free upgrade to the new system saying "OUR BAD, SORRY FOR THE PROCESSOR SCREW UP" that would be great. because i know so many people that have complained just like the windows vista users did
PLEASE FIX THE SCREW UP THAT WAS MADE WITH LION. I LOVE THE IDEA OF IT, BUT CAN'T STAND THE LAG AND HAVING TO REPAIR THE PERMISSIONS AND THE DISK ONCE PER MONTH.
oh yea, and if you haven't done that to improve the speed of your mac yet, do it, because it really does work. there are some forums throughout here that explain the details

Hi g,
In my mind, there is only one thing to do, and that is to bring it back to wherever you had the repairs done and have them fix it correctly under warranty. You should not have to pay for more repairs unless they can clearly demonstrate to you that there have been three completely separate issues which needed three different repairs.

New logic board means initialize hard disk?

Similar Messages

Maybe you are looking for