New Logitech speaker dock - does it work ok with Classic?

I'm thinking of getting the Logitech Pure Fi Anywhere speaker dock for my Classic. This is the latest update of the Logitech ipod speaker dock. From testing I know that the previous model worked fine and didn't seem to experience any of the problems with the classic that other sound docks had. Does anyone have the Pure Fi Anywhere and can confirm that it works fine with the Ipod Classic?
Many thanks.

I bought it after reviewing all kinds of brands and models. This is the best for the ipod cassic, believe me. Well I guess it's too late as you poted in Nov. sorry

Similar Messages

New MBPro and iTunes does not work along with certain websites on Chrome and Safari

I just bought my Macbook Pro 13" about two weeks ago. Everything worked fine when I was at school and at my friends house. The day I came home, I was not able to go to many websites such as Facebook.com or even my Gmail on Chrome or Safari. Also, the App Store does not load. I started using Firefox, and I am able to go on any website. Unfortuantely, the problem still exists with the App Store. Also, whenever I launch iTunes, it immediately freezes and I get the rainbow wheel and have to force quit. If I go straight to my music from Finder and click on a music file to play, it open iTunes, but freezes it and doesn't play anything. Can anyone at all help me with these problems?! I didn't expect to run into so many issues since my laptop is so new. I feel like it could have something to do with the internet at my house...

Is it possible your home router is blocking some websites? I used to help parents set up routers to block out certain websites so that their kids would stay pure and honest. Anyways, if all else is the same, and the variable is the router (home, school, friends house), then we have to blame the router.

TS3989 New MacAir but photostream does not work. Message though everything is on. "In order to use Photo Stream, you have to be signed into your iCloud account in System Preferences." And,

New computer but Photostream does not work. I am signed into my account but get the following message: In order to use Photo Stream, you have to be signed into your iCloud account in System Preferences. I go to system preferences and then get a message that says that my account cannot be accessed. However, I am using my icloud account for email and other items and it works fine. Any thoughts?

Are you getting this messages in iPhoto? If so try the following (again?):
Log out of iCloud in the System/iCloud preference pane and disable Photo Stream in iPhoto's Photo Share preference pane. Then log back in and re-enable, respectively. That should jump start Photo Stream.
OT

In the absolutely new 5S the gyroscope does not work, error are stable three degrees, calibration is hindered

in the absolutely new 5S the gyroscope does not work, error are stable three degrees, calibration is hindered

Also, I probably should have added that I am with Vodafone, and I'm currently using the Blackberry Curve 3G (9300) on the version 5 software. I also have no access to the Internet, which is telling me I have no signal. I have full 3G signal, so there is no issue whatsoever with my signal. I don't use the BBM on the phone, so I'm not sure if the issue is affecting that also, but I assume it would.

Since i have down loaded the new software my wifi does not work I have been to a apple store and they said it is a hard ware issue I do believe it is not my fault has the wifi workded before cheers Ben..

Since I have down loaded the new software my wifi does not work. I have been to a apple store and they said its a hardware issue. My phone was fine before the down load.

What is your technical support question for these user to user technical support forums?

Muse Featured News Widget close button does not work

Muse Featured News Widget close button does not work. Any suggestions!

Hi,
The close button on the News Widget works only when you select Lightbox as Position under the widget menu. I would appreciate if you can add it to the ideas section over here, http://forums.adobe.com/community/muse/ideas
Regards,
Abhishek Maurya

Hi, My iPhone 4s does not work properly with the sound.

Hi, My iPhone 4s does not work properly with the sound. It just ring. Any other app it doesn't make sound unless I have my headset or bluetooth. And it make me choose between "DOCK CONECTOR" or my "APPLE TV". Why? Or any sugestion plz

Hi M3MB3R,
Thanks for visiting Apple Support Communities.
You may find the troubleshooting tips in this article helpful:
iPhone: Sound muffled or low from the speaker or when speaking into the mic
http://support.apple.com/kb/TS1631
Cheers,
Jeremy

My iphone 5 does not work properly with Ford Sync,

Hi, My iphone 5 does not work properly with Ford Sync, everytime I pair the phone, Ford sync navigation system freezes and does not work !
Can someone help.

Hi M3MB3R,
Thanks for visiting Apple Support Communities.
You may find the troubleshooting tips in this article helpful:
iPhone: Sound muffled or low from the speaker or when speaking into the mic
http://support.apple.com/kb/TS1631
Cheers,
Jeremy

Does Lightroom work well with hiDPI Windows 8.1 touchscreen ultrabooks?

Hi all,
My old laptop is on the fritz, shopping for a new one.
Apart from the Web, the application I use the most is Lightroom.
I've been interested in the nice new ultrabooks, but I'm wondering: does Lightroom work well with hiDPI Windows 8.1 touchscreen ultrabooks?
Is hiDPI advantageous, or actually annoying?
What can you actually use touch for in Lightroom, and does it improve your workflow?
Thanks kindly!

I am not 100% sure whether lightroom supports HiDPI on windows but on Mac OS X it is absolutely fantastic (I use a retina MBP). So I would see if you can try it out somewhere. My guess is that Lightroom supports it on Windows too and then I can highly recommend it.
No clue if touch works well or not for Lightroom. My guess is not as almost always using touch in applications that were not designed for it is very kludgey.

Does PPBM6 work properly with Adobe's free trial CS6 download?

Does PPBM6 work properly with Adobe's free trial download of Premiere Pro CS6?
Does the CS6 download include the 6.0 level release, or is it the latest version (or at least download patchable to the latest version)?
If anyone has actually done exactly this, please share your experience?
Thanks,
Jim

Randall,
Just a snippet from my mail to Bill about testing results up to now:
MPEG2 results appear to be dependent not on number of cores, but on amount of memory, next to the video card and maybe memory controller. How else would your SB be faster than your 980 with the same video card and 4 cores versus 6? I think 32 GB versus 24 GB is the differentiating factor here, as well as the memory controller on the SB, or am I trying to find explanations that are not there?
Disk I/O is purely a matter of sustained transfer rates. Number of cores is irrelevant here. I don't have sufficient data yet to determine whether amount of memory will be influential, but I assume there is a lower limit when the results will further decrease. We are talking about a 37,092 MB file being written to disk and the sustained transfer rate can be negatively influenced by a limited amound of memory.
MPEG2-DVD as shown above.
H.264 is mainly a factor of number of cores, size of the L3 cache, amount and speed of the memory and clock speed.
MPE Gain is a resultant calculated number. It is hard to interpret, I admit, but in general you will see that the better a system is performing, the lower the Gain figure. Very fast systems can handle software MPEG2-DVD encoding quite well, slower systems struggle with that task, but with hardware MPE even slower systems achieve around the same figure as faster systems and the consequence is that slower systems show a higher gain.
Further notice that the new Total Time figure is only the sum of Disk I/O + MPEG2-DVD + H.264-BR. In the PPBM5 test we included the rendering test as well, but since we no longer use that, it is no longer a part of the Total score. Also, the weighing of test results to calculate the RPI has been adjusted for this new test.
Hope this gives some informative background info.

Hi I have just bought a mac book pro 2ghz 8gb ram with haswell.also it's running maverick. I am wanting to start using logic but does it work ok with maverick everything I read says it's no good please help

Hi I have just bought a mac book pro 2ghz 8gb ram with haswell.also it's running maverick. I am wanting to start using logic but does it work ok with maverick everything I read says it's no good please help

Which version of Logic? I have 9, but I've yet to install it. I'm just creating the images of the disks atm to install them on my Haswell. Will let you know how that performs.
Logic 10 would most certainly work fine though.

I have aMacBook Pro with Mountain Lion operating system. Does MacKeeper work well with this Operating System

I have a MacBook Pro with Retina Display. My operating System is Mountain Lion 10.8.5 Does MacKeeper work well with Maontain Lion 10.8.5 and provide good Virus protection? Appreciate the support.

The Hatter:
Thanks for the input. So far the responses I've received are all the same. I will not be purchasing MacKepper.
Beracha007

Hello! I'm looking to purchase a Bluetooth. I'm really liking the LG Tone Pro. Does this work Good with a Iphone 4S?

Hello! I'm looking to purchase a Bluetooth. I'm really liking the LG Tone Pro. Does this work Good with a Iphone 4S?

It should. I don't see why it wouldn't. It all depends on the quality of the headphones though. You should borrow one from someone who has it and test the headphones itself (music, calls, and other features)

I changed my appleID, it worked fine but now I can not restore icloud backup in a new ipad (old appleid does not work and it is grey colored so I'm unable to change it)

Some months ago I changed my email address and so my appleID. Everything worked fine, but last week my ipad broke and when I tried to restore my icloud backup in my new ipad it does not work: it asks me for the password of the OLD appleID (it doesnt work); and in icloud configuration page the field for appleid is colored grey so I can not change it.
any clues? thank you in advance

My suggestion is to change apple id back. I know it is not something you want to hear, but there are suppose to be ways around it and usually they work, but not right now. I suspect that is consequences of Apple getting their servers ready for ios7. Normally in your situation - you should be able to get all your stuff back, but apps, and then you can sync those or download from icloud. But lately (last week) it does not seem to work normal way.

New FocusTraversalPolicy Mechanism Does Not Work Well With OO Designs

I would like to complain about the new focus traversal mechanism not working well with object-oriented GUI designs.
Specifically, we have many reusable panel classes that can be swapped in and out of reusable dialog classes. On some of these panels, the default focus traversal is not what is desirable, perhaps because one component on the right side of the window is just slightly higher than a component on the left side, maybe due to the component on the right having a label on top, and so the default focus goes to the component on the right instead of the left. So we have a need to be able to explicitly define the order of components in some panels.
If I try to define a focus traversal policy in the panel's constructor, a NullPointerException is thrown because the panel's focus cycle root is null (the panel has not been added to any dialog or frame yet).
If I try to associate a focus traversal policy at the dialog level, it would have to explicitly reference its child panels' inner components, which would break the encapsulation of the panels. It would also make it hard to have generic dialog classes into which various reusable panel objects can be swapped.
Someone suggested making each panel a focus cycle root. This makes it hard to "break out" of one panel to move on to the next panel in the dialog. Special keys would have to be assigned to try to cycle out, and these keys would have to be different than the normal traversal keys, making them inconsistent and nonintuitive to the user. Also, the focus policy would have to know if the dialog had more than one panel, what order the panels were in to know whether to cycle to the next panel or not, etc. This is a mess.
Does anyone have any idea how to get around these problems? I have tried using a global focus policy with a global hash map of prev/next component key-value pairs, but we are still running into trouble with some deeply nested tabbed dialogs. It's just not possible to always have the focus cycle root in existence at the point where you want to explicitly define traversal between two components, or when you are trying to establish the default component for a panel in a tabbed pane.
Has anyone else run into similar issues?
Robbie Gilbert
[email protected]

I agree completely. One of the popular consultants on this forum stated that the new focus mechanism was more versatile and only a little more complex. I would say it's more than a little complex given the trouble average programmers are having understanding how it works...at least at first...and after understanding it realizing that they are going to have type their fingers off to update their code. Oh, and the dread of maintaining this awful mess.
I'm currently having the same problem as you Robbie. Some of my reusable panels need special tab ordering...that's not usually a problem, in most programming environments, till now. Now I have to go around the world and back just to get my stupid cursor to be in the right place when I hit the tab key??!!! and special key mappings just to get out of a focus cycle...lame.
And how is an IDE graphical designer going to work with this? It's not, that's how...ok maybe if some kind person or company creates a custom focus traversal policy editor of some kind, I don't know.
Good grief Sun! We need something to help us meet our deadlines, not solutions that force us to spend 80% of our time customizing every stinking bit of UI functionality we need!!!
JTables are even worse. I've mastered most of the garbage that is JTable after many months of pain and I don't know how I'm going to help my peers understand them in any short amount of time. Most of them were Oracle Forms programmers, not that that is any great solution either. But they will likely have problems.
In conclusion, I wish I had chosen another UI technology for our new product client, and may yet.

New Logitech speaker dock - does it work ok with Classic?

Similar Messages

Maybe you are looking for