New Look for the HP Support Forum - FAQ

Welcome to the HP Community!
You may notice that we have changed our look. 
We designed the new layout to make it easier for people to find what they are looking for.
While the look of the community has changed, the foundation of the community has not. All of the features you liked are still here.
Here are some of the highlights:
The community pages are less complex and easier to navigate
Buttons are now easier to find because they are brightly colored. 
A new modular approach gives us greater freedom to launch improvements more quickly.
Below is a guide that walks you through the new design. We would love to have your feedback.
Where is information for new users located? 
Information for new users can be found by expanding the “Quick Links” menu on the right-hand side of any community page.  Once this menu is expanded, links such as Community FAQ, 1st Time Here, Rules of Participation, and more are listed. 
You may also navigate directly to the “Welcome!” area by following this link: http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to/bd-p/Hello
How do I search the community for an answer to my issue?
To search the community, navigate to the search box on the top-right of any community page.  Here you may type in some keywords or a question and click the Go button to see your search results.
On the search results page, you will also be able to select from more advanced options such as narrowing results by location, by author, by accepted solution, and more.
What happened to my settings? 
Click the More Resources drop down menu on the right-hand side of any community page.  Once this menu is expanded, click User Settings to access your personal settings. 
In this area you can set a signature to use in the community which will be automatically applied to all of your posts, change your avatar, and more.
How do I see my profile?
To access your profile, please click the Quick Links drop down menu on the right-hand side of any community page.  Once this menu is expanded, click the Profile link.  Alternately, you may also click your username in the top-right My Community area of any community page to access your profile.
What is the Community Alert?
Occasionally we have some important information about the community to share with all of our community members.
Whenever we have important information to convey, the orange Community Alert link will become visible to all users at the top of every community page.  Please click this link when it’s available to read our update.
How do I upload a picture to the HP Consumer Support Community?
To upload a picture to the community, navigate to the Upload menu on the right-hand side of any community page and select Image Gallery:
On the Image Upload page, you can click the Browse button to choose a file to upload.
Where can I find my Private Messages?
Your private messages can be accessed by clicking the envelope icon in the My Community area to the right of any community page.
Alternately, you can select the “Messages” options in the Quick Links menu on the right side of any community page.
What happened to the “Send this user a private message” link?  I can’t find it.
To send a user a private message, navigate to the right-hand side of the user’s profile.  The “Send this user a private message” link is located in the Contact area below the My Community section.
You will also find options to add a community member to your list of friends, or ignore a community member in the Contact area of their profile.
What happened to the Best of the Community blog?
The Best of the Community blog can be accessed by clicking the Blogs dropdown at the top of any community page:
Where to I find the Top Contributors and Top Kudos posts now?
You can find the community’s Top Contributors, Top Kudos posts, and more in the Discussion Boards in the area at the bottom of the community homepage. 
To see the Top Contributors or Top Kudos Posts for a specific category, navigate the bottom of any category page after selecting a category link on the community homepage. 
How do I find my Subscriptions & Bookmarks?
You can navigate to your subscriptions and bookmarks by clicking the More Resources dropdown box on the right side of any community page and selecting My Subscriptions.
Doing so will take you to the Subscriptions & Bookmarks area of your User Settings.
What is the Me Too button?
The “Me Too” button is a way for you to let us know that you’re experiencing the same issue as another community member.  If you are experiencing an issue identical to the one you see described in a post by another user, click the Me Too button to let us know!
I work for HP, supporting the HP Experts who volunteer their time and technical knowledge to help others.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Hi,
Try the following
First of all, see if you can uninstall your current version of HP Support Assistant by using the Microsoft 'Fixit' on the following link - this is particularly useful in correcting issues that may prevent reinstallation on machines running a 64bit OS.
http://support.microsoft.com/mats/Program_Install_and_Uninstall
If this completes, restart the PC.
Next download and install the latest version of HP Support Assistant from the page on the link below - the download links are towards the bottom of the page.
http://h18021.www1.hp.com/helpandsupport/hp-support-assistant.html
After the installation, restart the PC again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • New Look For the HP Support Forum!

    On December 1st, we will launch a new layout for the community. The new layout will not change the underlying functionality of the community. All of the boards and features that you use will remain unchanged. The new layout was specifically created to incorporate community feedback about the navigation and display.
    Here are some of the highlights:
    The community pages are less complex and easier to navigate
    Buttons are now easier to find because they are brightly colored. 
    A new modular approach gives us greater freedom to launch improvements more quickly.
    Here’s a sneak peek at some of the updated community pages.
    New, expandable category menus reduce home page clutter and give us more room to add information to assist and showcase the members of the HP Consumer Support community:
    The Best of the Community blog is now located in an expandable menu the top of every community page:
    Here is an FAQ thread that will guide you through many actions that have been slightly tweaked; processes like editing your user information and uploading images has been simplified.
    There will also be a Temporary Feedback board created for you to post feedback about the layout. The layout change is the first step in an ongoing process to improve the community. We hope you enjoy the new layout and encourage your feedback.
    I work for HP, supporting the HP Experts who volunteer their time and technical knowledge to help others.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

    Hi m5brokenlaptop,
    No one can see your profile information except for you.  Any information like your name and personal email are hidden from regular users.
    Thanks,
    SunshineF
    Clicking the "Kudos star" to the left is a great way to say thanks!
    When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
    Rules of Participation

  • Several new cameras for the RAW support

    Adds RAW image decoding support for the following cameras: Panasonic DMC-LX1, Panasonic DMC-LX2, Leica M8, Leica D-LUX 2, Leica D-LUX 3, Fuji S5 Pro, Nikon D40x, and Canon EOS 1D Mk III.
    Resolves an issue in which some DNG images may appear tinted or distorted.

    this is part of 10.4.10
    http://docs.info.apple.com/article.html?artnum=305533
    well at least some of the people will be happy with the added camera support while others will not be ...
    by the way, you shouldn't have marked this as a question ... as there is no question ...

  • I've registered for the Firefox support forum, but the confirmation email hasn't come (after 3 + hours and 2 extra requests to "resend" it).

    Besides the original registration, and 2 additional requests for the confirmation email, plus asking a previous question, which appears to have triggered the sending of yet another confirmation email, I've received none! And I really don't mind waiting an hour for a confirmation email, but 3 hours and counting is not acceptable.
    And there appears to be no other way to contact anyone about anything -- except for a feedback form in which you have to explain the problem in one or 2 short sentences.
    Yes, I've checked my ISP and my email is working fine. The test message I sent myself arrived in under one second! I've checked my spam folders, and they aren't there either.....not one.
    Thanks for your help :-)
    brynn

    It is a phishing attempt to get your Apple ID and Password.
    You should forward it to Apple : [email protected]

  • When I try to reset my iPad mini it keeps asking for  a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

    I know my passcode is correct but when I try to reset my iPad mini it keeps asking for  a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I have followed Apple support Article HT4527 for moving itunes but have insufficient space on my new PC for the complete library of.  How can I leave music on the external HDD but associate the content on my external HDD with my pc itunes when it is open?

    I have followed the Apple Support Section Article HT 4527 and have moved itunes media onto an external Hard Drive.  The complete file is 103GB in size.
    I have downloaded the latest itunes onto my new PC.
    When I follow the article and try moving the itunes file onto the new PC, I am informed that there is insufficient space on my new PC.
    In any case, like my old system, I want to leave my music on the external HDD and just have the music library displayed in itunes when I click on the "Music" folder.
    How can I get itunes on the new computer to interogate my external HDD to just list the library and leave the music on the external HDD?

    you can do this by keeping the external hard drive connected and doing the following
    -hold shift key down on computer while opening iTunes and a prompt will appear to choose a library
    -select choose library, iTunes should bring up your explorer windows where you can search for the external HD
    -after you find the external HD find the iTunes folder you just copied to it
    -after opening the iTunes folder look for the file that says iTunes library.itl or if you can't see that extenstion just look for a document looking thing in the iTunes folder that shows up as a database file
    -double click the database file and boom iTunes should load your library without having to copy it to the computer
    PS: do make sure that if you are going to do it this way, make sure that the external HD is connected at all times, because if you don't then you will get exclamation marks next to your iTunes songs
    double PS: if you are unsure how to find out if the iTunes library file is a database file just right click it and choose properties and under the type it should say database file
    hope this helps:)

  • TS1398 I just reset my new router name and password and my iPad keeps picking up the old name using the old password. How do I purge the old info and get it to look for the new name?

    I installed a new wireless router and connected with my iPad. I then changed the ID and password with ethernet but now my iPad keeps picking up the old router name and password and doesn't see the new name. How can I get it to stop looking for the old name and find the new one?

    Hello Stevo39,
    If your iPhone continues to prompt for your old account and password then check out the following article.
    If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support
    This article may help too.
    Apple ID: What to do after you change your Apple ID - Apple Support
    Regards,
    Nubz

  • TS4062 I've done all of these recommended steps.  My problem is that I have a new laptop that I am trying to sync my iPhone (and iPad for that matter) via Wi-Fi but both devices are looking for the old laptop to sync.  Any other suggestions?

    I've done all of these recommended steps.  My problem is that I have a new laptop that I am trying to sync my iPhone (and iPad for that matter) via Wi-Fi but both devices are looking for the old laptop to sync.  My iTunes is version 11.0..3.42, iPhone is 6.1.4, and iPad 6.1.3.  Any suggestions?

    All I had to do was complain.  I synced my iPhone to the Windows machine, checked the other account at iTunes prompting (where no apps had shown up previously), reconnected the iPad, and 140 apps downloaded including the App Store.  I have no idea why.

  • TS2776 I cannot get my IPhone to recognize my new computer; it's still looking for the old one.

    My IPhone won't sync with a new windows 8 computer.  It's still looking for the old one.  How in the he11 do you change the name of the PC the IPhone looks for?

    This user tip should be useful
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive

  • Looking for the oldest Macbook that can support garage band

    I am looking for the oldest "vintage" apple macbook or macbook pro that is capable of supporting garageband.

    Yes the MB402LL/A is the Early 2008 model 4,1 MacBook. It can run a maximum of 10.7 Lion. http://www.everymac.com/systems/apple/macbook/specs/macbook-core-2-duo-2.1-white -13-early-2008-penryn-specs.html
    You would do best to buy iLife on the DVD since the latest updates to iPhoto and iMovie require 10.8 Mountain Lion.You can get the iLife ’11 DVD which will run on 10.6  on eBay fairly cheap.  http://www.ebay.com/sch/i.html?_odkw=apple+ilife+11&LH_Auction=1&LH_BIN=1&_sop=1 2&_osacat=0&_from=R40&_trkparms=72%253A1234%257C66%253A2%257C65%253A12%257C39%25 3A1&LH_PrefLoc=1&_sc=1&_trksid=p2045573.m570.l2632.R2&_nkw=apple+ilife+11&_sacat =18793

  • Just downloaded Firefox 4. Running Windows XP. Some of the new features are mising such as the new "Firefox Button" and the new location for the bookmarks button. The look is almost like Firefox 3. Why is this happening?

    Hi. I just downloaded Firefox 4. Some of the new features are missing such as the new "Firefox Button" and the new location for the bookmarks button. It almost looks just like Firefox 3. I am using Windows XP on this desktop computer. On my laptop, running Windows Vista, Firefox 4 has all the updates advertised. Why is this happening? How do I fix?
    Thanks
    Jamie

    Thanks so much!

  • Whenever i try to download a rather large file i continue to get the "could not read source file" error. Tried new profile, uninstalling and looking for the compreg.dat file to delete nothing is working. Please help

    whenever i try to download a rather large file i continue to get the "could not read source file" error. Tried new profile, uninstalling and looking for the compreg.dat file to delete nothing is working. Please help

    Did you reinstall CS3 after CC?
    For that matter, doing an in-place upgrade on the OS is always a gamble with Adobe programs. Reinstalling all the versions you need, in order, would probably solve your problem.
    And you shouldn't need to save as IDML after opening the .inx in CC.

  • I'm looking for the old toolbar that doesn't double post the web adress and only has single line entries and the extension xpi doesn't work with my new computer

    I'm looking for the old toolbar that doesn't double post the web adress and only has single line entries and the extension xpi doesn't work with my new computer

    Mike wrote:
    > Could someone tell me why this prototype-based lightbox
    seems to work on one
    > of my sites but not on the other?
    >
    > I literally took the exact same .js & css files,
    copied them over from one
    > site to the other, but it's only partially working on
    the new site.
    >
    > Works :
    >
    http://www.roxanacampagiorni.com/
    >
    > Doesn't work :
    >
    http://www.vilverset.com/sample.html
    >
    > Been troubleshooting this one for days, and I'm stumped.
    Script wants
    > nothing to do with lightboxing HTML files on the new
    site. Only straight
    > JPGs. But it was written to work with them, and it
    *does* work with them
    > just fine on the *other* site.
    >
    > Where is the anomaly between the two sites that's
    causing it to break in
    > sample.html?
    >
    >
    Not sure if this is relevant but on the page that works you
    have these
    js files linked - 4.....
    <script type="text/javascript"
    src="/scripts/jscripts.js"></script>
    <script type="text/javascript"
    src="/scripts/prototype.js"></script>
    <script type="text/javascript"
    src="/scripts/effects.js"></script>
    <script type="text/javascript"
    src="/scripts/control.modal.2.2.3.js"></script>
    and on the page that doesn't - 3......
    <script type="text/javascript"
    src="/scripts/prototype.js"></script>
    <script type="text/javascript"
    src="/scripts/effects.js"></script>
    <script type="text/javascript"
    src="/scripts/control.modal.2.2.3.js"></script>
    HTT
    chin chin
    Sinclair

  • How do I create a new window for the iTunes store?

    Hi,
    I have the latest iTunes update on a Windows PC, but I can't seem to open any new windows for the iStore like you used to be able to, so you have to come out of your iTunes library (annoying if you want to check that you haven't already purchased a song you're looking at etc.).
    Please tell me there is a fix (easy or difficult) for this!!
    Matt
    P.s. I have the latest iTunes update.
    PLEASE HELP!!!!

    Reboot the ATV and try it again. If it still won't play correctly, find the file in your iTunes store purchase history, click on the "Report a Problem" link, and report it to iTunes store support.

  • This new update for the iphone has me troubled. Nowhere did I see where it was only good for 3GS,4S and or 5. Is this update also good for the 3GS? I'm reading people are haing trouble.

    This new update for the iPhone has me troubled. Nowhere did I see where it was only good for 3GS,4S and or 5 or all. Is this update also good for the 3GS? I'm reading people are having trouble.

    iOS 6 can be loaded without problem on the 3GS.  Not all features are supported however.
    With respect to your reading people are having trouble, what did you expect to see on this technical support forum?  People don't write in to state they have a trouble-free upgrade.

Maybe you are looking for

  • Use of external battery cases, does it harm the iphone's internal battery?

    Can the use of external battery cases harm the life of the internal battery in the iphone 4? (ie. Mophie juice pack air)

  • Remoteviewer ActiveX never popup (install link wont go away)

    Running 11.2, and trying to use IE8 and/or IE9 on Win 7 x64 for remote control. On some of the administrators machines, when trying to remote control the link for installing the remote control viewer never goes away. Installation of the viewer works

  • Apulse skype - microphone stops working.

    HI ! I use apuls for calls on Skype. I have an usb webcam: user0@homelinux ~]$ lsusb Bus 001 Device 004: ID 041e:4071 Creative Technology, Ltd Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Found

  • Wifi Sync, Ejected device not showing up anymore

    Wifi syncing is not working anymore after i accidently pressed the ejected button. I have tried all the suggested steps to make it work again, everytime i unplug the usb the device now dissapears from the device list in itunes. Any ideas?

  • Unusual isight behavior

    Recently, I have been experiencing problems with my built in isight camera. All works fine after a recent start up. Then after 345 min- a couple of hours, I get the camera in use by another application error and my video icon disappears in ichat and