New loops not adapting to tempo

A buddy of mine sent me a few loops from sonar for a song i'm working on, and I converted them to .aif then added them to the loop browser, and they come up and are categorized and everything, however they don't adapt to whatever tempo the song happens to be. . . the retain their tempo. . . any thoughts?? muchos gracias.

You might need to process them with Apple's SoundTrack Loop Utility:
http://www.thehangtime.com/gb/gbfaq2.html#soundtracklooputility
(Perhaps GB was able to read all Sonar's MetaData except for the tempo of the loop)
--HangTime [Will Compute for Food] B-)>

Similar Messages

Apple loop not responding to tempo changes

apple loops that have been created from an audio file in the arrange window do not respond to tempo changes. when i had logic 7 there would be a change in the audio file from an audio to an apple loop icon. this is not happening w/ logic 8 although it appears to be saved in the apple loop window but still i have no access to changes being made there as well. what is thew problem?

http://discussions.apple.com/thread.jspa?threadID=1793992&tstart=0

Loops not stretching to match tempo

I moved my loops to an external drive and then remapped them but now when I drag one into my arrange window it will not match the tempo. I also can't stretch it manually. I'm sure I did this before and I'm having trouble finding information about it both in the manual and online. How do I do this?

aha, thanks! I notice though that it does not always snap to the grid even though the time does change. Is there a way to do this manually?

Installed Jam Pack but see no new loops in Garageband loop browser. Why not?

I successfully installed Jam Pack but don't see new loops in Garageband loop browser. Is there some extra step I'm supposed to do? Before, I had about 57 Rock/Blues loops, and I still have just that. I had 14 instruments under All Drums, and guess what? Still only 14.
I know the install completed successfully - it said so, anyway.
Clues?

Have you filters set on the Loop Browser? Make sure the GarageBand Preference "Loops > Keyword Browsing > Filter for more relevant content" is off. Otherwise you will see a fraction of the available loops.
To see, if the JamPack has been installed, set the pop-up meu at the top of the Loop Browser to "Rhythm Section". Is that available?
Did you reindex your Loops after installing the Jam Pack? And did you restart the Mac? In Mt. Lion only restarting a Mac will ensure, that an application is not resumed from a cache, when you launch it again.Restarting the Mac will terminate GarageBand for sure.
If restarting the Mac does not make the JamPack Loops show, rebuild the Loop index. See: Rebuilding the Loop Index in GarageBand 6 or earlier - Apple Support

Add new loop field in custom infotype - error field .. not assigned to loop

Hi,
I have a task of adding a new loop field in a custom infotype screen 3000. Here, in the past there have only been the fields begin date and end date. I need to add a new field, so this is how I proceeeded:
1) I modified the screen 3000 in SE38, adding the field where I wanted and defining a loop.
Now, I get the syntax error : Field P9500-field is not assigned to a LOOP. LOOP...ENDLOOP must appear in PBO and PAI.
There must be something wrong in what I'm doing, can you please let me know a quick fix on this or how I can accomplish this in PM01? Please keep in mind that this is a custom infotype for SAP TEM, I can't see it in PA.
Best regards,
George

Not a nice solution but I had to do this quick and I'll correct it in the next days:
The old flow logic PBO code was:
LOOP.
    MODULE FILL_DYNPRO.
ENDLOOP.
If I wanted to insert here something like:
FIELD whatever
    MODULE dummy.
, I'd get stupid error messages like this other field is not in loop, endloop, then if I put that other field I'd get the error that the fields are in the same loop...
Wanting just to get this over with, I added the following code (after the initial loop):
LOOP.
    FIELD whatever
      MODULE FILL_DYNPRO."same module as above
ENDLOOP.
This was repeated in PAI.
This pretty much works out fine for the moment, I'll look for finer solutions in the week to come.
Thanks for the help, guys.
Best regards,
George

TS1713 I need to purchase a new Portable Power Adapter which has a barrel type connection. The one I have is not working.

I need to purchase a new portable power adapter which has a barrel connector. Can not locate a new power adapter on the web site. Went through the troubleshooting, it is definitely not charging. Any one have info on this?

You can buy from Apple. Or other vendors, such as Amazon.
Check the wattage - it is printed on the side of the charger. Do not buy a lower wattage.
Here's one. Note this is not an endorsement, only an example.
http://www.amazon.com/Replacement-Adapter-Charger-PowerBook-A1021/dp/B002V1AYQ6/ ref=sr_1_1?s=electronics&ie=UTF8&qid=1396539641&sr=1-1&keywords=mac+powerbook+ch arger

Apple loops not getting saved with current projects tempo

I can't seem to make an apple loop that would get saved with the current projects tempo....i recorded a single bar midi drum loop with 130 as project tempo but when i save it as an apple loop it gets saved with a tempo of 92bpm. strange thing is when i drag the same loop back on a instrument track it plays at the current tempo i.e., at 130bpm but if i drag it to an audio track it plays at 92bpm... really stuck here....any help would be greatly appreciated..thanx..

ok now i have got half of the problem solved....i had left the "follow tempo" region parameter ticked....so now when i unticked it the loop follows the project tempo....but i dont understand y does the loops get saved with a tempo of 92 whereas the project tempo is 130bpm....moreover when i audition these loops they don't really LOOP while playin back....

Downloaded loops not changing tempo with the project.

I have all sorts of loops that I've downloaded in various formats.....wav, aiff, caf, etc. With many of these, when I insert them into a project, the loop retains its original tempo instead of stretching or shrinking to match the tempo of the project. Is there a way to convert these loops or change a setting somewhere that will cause them to change tempo as the tempo of the project changes?

Hi, Just Re-record the loop to any empty track, and Voila....Now it will follw tempo change.
Logic only recognizes material recorded in the session or apple loops...so just re-record any imported material and it will follow your tempo and pitch change.

Apple loops not getting saved with tempo info

I can't seem to make an apple loop that would get saved with the current projects tempo....i recorded a single bar midi drum loop with 130 as project tempo but when i save it as an apple loop it gets saved with a tempo of 92bpm. strange thing is when i drag the same loop back on a instrument track it plays at the current tempo i.e., at 130bpm but if i drag it to an audio track it plays at 92bpm... really stuck here....any help would be greatly appreciated..thanx..

ok now i have got half of the problem solved....i had left the "follow tempo" region parameter ticked....so now when i unticked it the loop follows the project tempo....but i dont understand y does the loops get saved with a tempo of 92 whereas the project tempo is 130bpm....moreover when i audition these loops they don't really LOOP while playin back....

Can't install new loops/instruments in GB '08

I went to install iLife 08 on my iBook yesterday. I did a custom install because I didn't want to install all the apps right away. For Garage Band, I noticed that the option for installing additional loops and instruments was grayed out. It would not allow me to even check it.
What's going on? Why can't I install the new loops/instruments that are part of GB '08?

So, I installed GB 08
Then, I went back to the installer. I can now check the garage band add ons option. Except that I can't check just that. It forces me to check the main garage band install box as well. I assume that means it would re-install GB, just to get those extras??
Also, sounds and jingles still can't be checked. It says there is stuff for GB and iMovie. I can't install iMovie since my G4 ibook won't run it, but I would think I would still be able to get the sounds and jingles to use in GB.

Creating New Loops

Greetings-
I have a downloaded WAV loop of a drum in 96 bpm, and I want to save it as a GarageBand loop. But when I save it, it keeps its 96 bpm. In other words, when I drag it (the new loop) into a new track, it will not fall in line with the bpm of my composition. How can I change the bpm, whether by stretching it in the editor or otherwise (do they call that adjusting the velocity?), so it conforms to the timeline of my overall composition?
To clarify, I'm not speaking of dragging a loop to play longer. Rather, I need it to be self-adjusting to the bpm of the rest of my tracks, just like any other Apple Loop.
Thank you-

the best way would be to make it an apple loop with Loop Utility:
http://www.bulletsandbones.com/GB/GBFAQ.html#looputility
(Let the page FULLY load. The link to your answer is at the top of your screen)

Syndication event for new MDM PI Adapter in MDM 7.1

Hi,
We have setup the new MDM PI Adapter for MDM 7.1 and have created interface in PI using this new MDM PI adapter. All neccesary steps as mentioned in the installation guides are done.
Also all necessary remote systems/ports/syndication maps are created in MDM, and syndication is running fine on the MDM side (using the syndication server, so not manually!)! The syndication files are created in the Outbound/../Ready folder, so again, on MDM side everything looks OK.
However, when the syndication server has run, there's no syndication event triggered (or at least not captured by the MDM PI Adapter), hence PI is not picking up the files from the outbound folder. It looks like PI is not getting any syndication event, or at least is not catching the event, since monitoring on PI side does not show us any trigger.
Now I have the following questions:
1. Does anyone know how we can verify/monitor if MDM raises any syndication event (the export log in the console of MDM 7.1 does not say anything about an syndication event that is raised, only that the export itself was succesfull)?
2. Is there any additional setup to be done on MDM side in order to make sure that the syndication event is raised as soon as the syndication server is ready (or is the syndication server ALWAYS raising the event, independent of using the MDM PI adapter)?
If anyone else has any experience with the new MDM PI Adapter for MDM 7.1, please share us your valuable information. Thanks in advanve for your answers/advice.
p.s. We are using MDM 7.1 (build 7.1.01.72).
Regards,
Marcel

Hi
We are also currently experiencing a similair issue. Seems to occur when some sort of matching activity occurs on the MDM Server. What happens is that syndicated files remain in the 'Ready' folder on the Outbound Port. In the PI Netweaver Trace Log files we start seeing this error message:
Jul 13, 2009 4:34:41 PM com.sap.mdm.logging.MdmLogger warning
WARNING: NotificationDispatcher - Connection failure. Original exception: 'java.net.SocketException: Connection reset'.
If we restart the Connector and Adapter from the NetweaverJ2EE Application Admin screen, this files still remain in the READY Folder. However, if i syndicate another data record into that folder, the syndication for that file work as well as for the rest of the files that were sitting in the READY folder. Seems like the "failed" files seem to latch off the syndication event.
Doesn't seem like the stability and robustness is there?
Any feedback would be greatly appreciated.

Can't create a new SOAP receiver adapter

Hi,
I configure a new SOAP receiver adapter in the integration directory and activate the adapter.
When I send trough XI a message to this communication adapter an error occurs in the defaultTrace.trc :
failed to set up the adapter for channel .....;caused by java.lang.NullPointerException
No stacktrace.
I try to set the communication channel inactive and active and also restart the adapter engine but nothing works.
Do someone solve this problem ?
Regards,
Gerald

Hi Gerald,
Check the below and see if anything is missing/wrong
( may not be the exact order as below, but you need to reach the last one 'your adapter')
runtime workbench->component monitoring -> Integration Server -> adapter engine ->adapter monitoring (in status tab)-> Soap -> your adapter.
Do the same for your 'sender adpater' also
This may help to identify whats wrong in your settings
Hope this helps to fix your issue
Regards
Vishnu

New USB Power Adapter includes cable

I just got caught and hope this advice helps others...
The original USB iPod power adapter did NOT include a USB-to-dock cable. I just ordered the NEW USB power adapter and the extra cable. Guess what - it now includes the cable!

Did you find a solution Raf SR?
I have a similar problem. After initial (updating/restoring) issues with my ipod mini which I won't bore you with, I got it working and charging successfully through my PC via the USB cable. Then I bought a USB power adapter for when I am away from my PC. When I connected my ipod to the power adapter it did the brief "do not disconnect" thing then "OK to disconnect" with no attempt to charge. I left it overnight and the following morning it had the battery/triangle/exclamation mark symbol and I had to reset the ipod to get it to work (I did this while still connected to the power adapter).
I borrowed a friend's firewire power adapter and that worked fine. I went back to the store and swapped my usb power adapter for another (firewire power adapter wasn't available) and it did the same as the first one. The ipod still charges fine via the PC and usb cable.
I don't get it! Can anyone help? Thanks
Compaq Windows XP

Loops not in browser

Trying to load loops into loop browser, garageband says " loops not in garageband format will not be displayed in browser' - this has not happened before.
aiff files were shown, how to get browser to show aiff loops?
thanks.
4bs.

Hangtime,
this is all a bit much for me; GB on my laptop (G4 PB ) accepts these loops, and GB on my PB is currently running as should. The problem occured when I copied the song over to my mates G5, so I could ( supposedly ) enjoy the benefits of G5 power and speed. All that happened was a series of errors as the copied song ( which still opens ok on the PB ) such as not finding files etc; From here things got worse as I tried to reload loops and at first it all worked, then loops not recognised, and then finally, loops will not show in browser.
I have a copy of the song bsck on my PB and it loads runs and sees loops just fine; plus, all the loops load into GB and are seen.
End state is that I have a prope running GB with all loops on my PB, but my mate now has a non working GB on his G5
4bs.

New loops not adapting to tempo

Similar Messages

Maybe you are looking for