New lot not appearing in qa32 - v urgent

Hi all,
I have an urgent issue to resolve. we have developed a report that shows those batches
-for which UD has been done 8 days before but no despatch till date OR
-for which no UD has been done and date of production is 8 days before from today.
User wants that a new lot for above batches should appear for UD again in qa32.
For this i have defined procedure as:
1. Run REPORT Which will identify batches older than 8 days (from the days of production or last UD date).
2.Go to QA07 Enter material codes, Batch numbers, and plant and select the option of Block Batch at lot creation.This will transfer all the mentioned batches to blocked stock and create an inspection lot automatically.simultaneously an inspection lot will start appearing in transaction QA32, against this batch for inspection.
Now the issue is that after QA07, I can see in mb52 that stock of the batch move to restricted, but no inspection lot appears in qa32. a new inspection lot should appear in qa32.
any ideas ? have i missed anything? i have also done changes in inspection plan,
cant figure out what i missed. pls respond.
Regards,
Aisha Ishrat
ICI Pakistan Ltd.

Let me simplify my question:
i have some batches in system for which UD had been done 8 days
before but no despatch has been done against those batches.User
want to give UD again for those batches.
what i advised him to change the inspection plan of those
materials by putting '9' in 'usage' and '4'in 'status' fields in
qp01 and then go to qa07 and enter material codes, Batch
numbers, and plant and select the option of Block Batch at lot
creation.The batches automatically transferred to blocked stock.
Now the issue is that after batches transferrence to block stock,
new lot should appear in qa32 but its not appearing.any ideas??
Have I missed any thing? Kindly give a prompt reply.

Similar Messages

Today's inspection lot not appearing in qa32 & so processing through qa02?

Hi all,
Now when i created the GR, eventhough the inspection lot is created, it is not appearing in qa32, please suggest me why?
later on i processed the ud through qa02 only
regards,
Sanjana

Now when i created the GR, eventhough the inspection lot is created, it is not appearing in qa32, please suggest me why?
later on i processed the ud through qa02 only
Dear as per my understanding give the exact material code,if batch managed give the batch also,give the lot created date etc and again check in QA32 as you saying you can able to access inspection lot through QA02 then it must be visible in QA32 also.
Select the all inspection lots radio button in QA32 if still you couldn't able to find the lot in QA32 as UD might have already done.
Cheers
KK

Inspection lot not appearing in QA32

Dear Experts,
We have transfered a batch from a storage location of one plant to the storage location of another plant through movement type 909 with all require datas entered and saved the transaction . But while we checked in MB51 and QA32 , no material document or a Inspection lot for stock transfer not appearing.
When checked for the logs Message QA 150 appearing for ' Errror inserting QALS as update was terminated ' . What to do ?
Thanks.

Hi
Is 909 is SAP's standated Mvt type?
Check the setting for this mvt type in QCC0->Qulity inspection->Inspection for goods Mvt.--->Inspection lot origine & Deactivate Quality inspection.
I have a suggesion.for transfering Material from one plant to other SAP has own Mvt type:301(single step--->Without purchse Order).You can active 08 inspection type for Material at receiving plant.It will create a lot at receiving plant.
In addition to this 351& 352 are used when purchse order(STO) is there.
In hop this will help me.
revert back for any Querries.
Regards
Sujit Gujar

Results recording tab not appearing in QA32

hi,
can anyone tell me why results tab not appearing in QA32 , is there any authorisation missing?

Just check which roles are added to that used id
selec 1 role that is relevent to inspection (result recording) and add QE01 t_code in that role.
take help from ur basis guy for this.

New window not appearing

While working on Oracle Discoverer. When the user opens a report and clicks on the search button a new window should appear but it doesn't.

Any JavaScript errors in the Web Console (Firefox/Tools > Web Developer) about this?
You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

New field not appearing in component configuration for standard web dypro

I'm trying to add a new column to a table in an sap web dynpro component. I've enhanced the view to add in the new column but also noticed that it's using component configuration. When I go into the approriate configuration, however, all of the existing columns are there but my new column does not appear. Is there something else I need to do to pull the new field into the configuration?
thanks,
Malcolm.

Hi Olivier
Standard object 0020 gives fields only available in standard tables MARA , MARC , MBEW, MAKT . I too faced this problem for ML based fields in accounting & costing views ( as these fields are not in MBEW they are in CKMLHD). The said Z field if it does not exist in MARC it cannot be seen through std object. U need to do a saperate recording to upload this field. I dont see any other option to my knowledge.U can up load remaing fields through the std object 0020 & create a saperate recorded LSMW only for this Z field.
regards
prasad
reward if useful

New EIT Not appearing for Organization classification

Hi all,
I have set up a new EIT for the organization. I have run the scripts for populatting
the information_type in the hr_org_information_types table and also hr_org_info_types_by_class but the new EIT is not appearing in the new classification.
Can someone help me as to what I have missed out.
Thanks
Shekar.

Shekar,
1. Oracle HRMS Configuring, Reporting, and System Administration Guide (A95418-02)
Setting Up Extra Information Types for an Organization Classification
2. Note 70122.1 -> EIT: Extra Information Type Issues
3. Note 267462.1 -> Organization EIT Not Displayed
Regards,
Greg

[iTunes11] New songs not appear in library

Hi everyone,
With the new itunes 11 I can't see new songs or new movies in my local library (adding from iTunes Store or finder)
I have a macbook unibody with snow leopard.
I found a workaround : disable iTunes Match => new songs (or other itunes files) appear instantly.
I'm very surprised that this bug was'nt fixed before the release of the iTunes 11, am I the only one with this bug ?
Thanks in advance for your help.
Have a nice day
Jean-Cyril

Hi,
According to your post, my understanding is that the external list not display the new item button.
When we have created a new external list, by default, the new item button would not appear in the form.
However, we can first create a new item using the new item button in the Ribbon.
Then, after we have created a new item in the external list,
the new item button would display in the form as below.
You can create a new item using the ribbon, then check whether it works.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

New dimensions not appearing in erpi

Hi,
I am using erpi version 11.1.2.1 with e-business 12 and Hyperion Planning. We added 2 new dimensions in epma for the planning application and successfully deployed. I have refreshed the metadata within erpi but the new dimensions are not appearing in the target application page and so these cannot be mapped from e-business. The admin guide says a refresh of the metadata synchronises erpi and the app. The refresh does not appear to be failing.
Can erpi recognise new dimensions in Planning?
Thanks,
Nathan

My colleague tried and it worked. My laptop was intermittedly losing connectivity so we put it down to that. Glad the erpi does sync dimensions from planning!
Thanks,
Nathan

Why do new items not appear in my library?

I have noticed that new song, movies, etc. do not appear in my library under iTunes 10.7 I can see them in the Recently Added playlist, but not in my library. I just bought The Avengers. The digital copy downloaded and installed to my iTunes and I synced it to my iPad, but it is not in the library under Movies. Likewise the free MP3 Avengers Assemble album is not there. Apps I buy do show up in the list and do update.

This happens when you apply a motion tween to a shape that
wasn't converted to a symbol *first*. For
reasons of organizing and managing a flash doc - always
convert shapes/images to a symbol forst -
then apply motion tweens.
If you delete these "tween" symbols in the library - the
animation on stage will be lost -
animations (specifically symbols) reference the symbols in
the library.
Search help docs for "symbols" to learn how Flash works in
this regard.
~~~~~~~~~~~~~~~~
--> Adobe Certified Expert
--> www.mudbubble.com
--> www.keyframer.com
~~~~~~~~~~~~~~~~
MarkSLC wrote:
> In my Flash document library I noticed all these Tween
entries ( Tween 1, Tween
> 2, Tween 3, etc.). I didn't expressly create them or
name them, they just
> appeared. Can someone tell me what's up with this?
Should I keep them? Delete
> them? I'm pretty new at Flash. Thanks.
>

New contacts not appearing in contact list after ios upgrade

I recently updated my iphone to the latest ios, since then when I have saved a new contact to my phone, even though it appears with the new contact, say in recents, it does not appear in my contacts list?

I added the contact from the "Recents" tab. It now shows in "recents" as that persons name - rather than just the phone number, but doesn't appear in my contact list. Same thing happened when I saved a new contact from a message I received & also when I saved from a contact that had been SMS'd to me.

New episodes not appearing in iTunes

I have uploaded eight episodes total and only one is showing up in iTunes. I checked my feed on feedvalidator.org and the feed works fine. I also subscribed to the podcast and I am able to download all eight episodes but only the first episode shows up in iTunes on our podcast page. Since I am able to subscribe to the podcast and see all eight episodes I assume I am just waiting on iTunes to update my podcast page. Is that what is going on?
The podcast name is 'GQ on the law' and the website for the feed is http://gqonthelaw.podbean.com/
Any help you can offer is very much appreciated. Thanks!
Clint

Your iTunes Store page is at
http://itunes.apple.com/gb/podcast/gq-on-the-law/id533007710
and the feed is at
http://gqonthelaw.podbean.com/feed/
(please always post these when you have a question to save detective work). The feed seems to be OK - I'm afraid it's just a question of waiting until the Steore catches up. It usually takes 1-2 days for new episodes to appear, but the Store (which caches the feeds and visits them periodically to checkfor updates) may check for feed which haven't been updated for some time less frequently - it's two months since the previous episode wasa published. It should update eventually.

New Photos not appearing in iPhoto but are in Show Contents

Hello,
I am have a few issues with iPhoto.
1. My last two imports of photos do not appear. the Last import is showing photos from back in 2013. If I Show Contents I can drill down and see in Master, Original a 2014/04/12 & 13 folder with sub folders and all the pictures. I made a not of the file names and back in Iphoto I tried to search for the image name but it did not retrn any results
2. I have had to force quit iPhoto 2-3 times in the past two days
3. Today when I open iPhoto, the Events do not show photo is is a black box. If I scroll up and down it then shows some photos, like I would nomally see.
Do this issue seem to indicate a problem with iPhoto, is there an index type issuse.. can I rebuild iPhoto in some way
For point 1, can i delete the folders in the "Show Content" option and reimport them?
Thanks

For point 1, can i delete the folders in the "Show Content" option and reimport them?
No. If you know the file name of the photos that are not showing do a search form them with the search tool:
If the image shows up Control (right) - click on it and select Show Event from the contextual menu.
If it does'nt kdo the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - Run Option #4, Rebuild Database.
OT

On Lion OS why do new icons not appear on the desk top either from drag and drop of scanning onto

There seems to be an error on Lion OS which I installed recently. If you drag files onto the desk top they disappear. However, they can be found in finder. If you scan direct to the desk top they also do not appear. Is there a bug?

Sounds to me like you have a corrupt plist file.
First thing I would try would be to simply relaunch your Finder and see if that sorts your problem.
>ForceQuit>Finder>Relaunch
If not navagate to com.apple.desktop.plist and delete.
Finder>GO>(option Key)Library/Preferences/com.apple.desktop.plist
or in Finder shortcut ( ⇧⌘G) copy and paste:
~/Library/Preferences/
delete the com.apple.desktop.plist
Relaunch your Finder again.
The deleted plist will rebuild itself to default setting after Finder relaunch
Report back on your sucess or failure.

New topic not appearing in merged index

I have used @Peter Grainge’s “Merging Help” document for a few years now (at least since RoboHelp 8)
Now using RoboHelp 10. Internet Explorer 9.
I created the topic. Created a Map ID for the topic
Added to the index.
Saved the project.
Generated the parent (parent already had the child project in its TOC from years back). Content setting for Index is: “Default Index”. Navigation setting for Preferred Format is: “DHTML”.
Generated the child. Content setting for Index is: “Default Index”. Navigation setting for Preferred Format is: “DHTML”.
Copied the parent and child whdata, whgdata, whxdata folders to folders outside the project along with the generated results for the parent and child.
TOC is synchronized, Index appears, but the new topic does not.
Did I miss a step?
I did not add the topic to the browse sequence.

That narrows things down a lot. Close the project and save a copy of the index file somewhere. Open the project index file in a text editor. Can you see the index keyword in there? Does the entry look correct compared with other entries? If not correct it.
If still no result, try adding another keyword.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

New lot not appearing in qa32 - v urgent

Similar Messages

Maybe you are looking for