New LR3 64 bit install misbehaving!

Hello folks, I haven't been on the forum here for quite a while, but I'm stumped!
Recently I upgraded me workstation to Win7 64 bit, meaning I had to reinstall all my software.
Well,I made it through some minor glitches, but LR3.6 is giving me problems. What happens is that my grid/loupe view have no relationship to the filmstrip in the Library module!
So, if I open a folder or collection in the Library module, the first image is selected by default in the filmstrip, the grid, or showing in the Loupe view. But, if I click on another image in the film strip, it shows as selected in the film strip but not in the preview window, not in the grid view (the first/original is still selected), or the selected pic won't show up in Loupe mode (again just the original) and if I'm in the grid mode and double-click a pic to show it in the Loupe mode, well, you guessed it, the original still shows.
FYI, I can click on a pic then go to the Develop module and the Develop module "plays well" with the film strip.
I have a laptop with LR3.6 and Win7 64, and no problem there.
And, I've been a happy LR user since '07 and have never seen this behavior!
So does anyone know if this is a setting I'm ignorant about, or is this "wrong" behavior and maybe I need to reinstall?
I hope someone has a clue!
Thanks, Tony

Ah, well, I decided to reboot my computer. So either that or the restart of Lightroom made the problem go away -- case closed!

Similar Messages

I have windows 7 64 bit but the new itunes will not install because it can't find itunes64.msi. I have searxhed evertwhere on my pc. In addition, I can't uninstall the itunes and reinstall for the same reason.

I have windows 7 64 bit but the new itunes will not install because it can't find itunes64.msi. I have searched evertwhere on my pc. In addition, I can't uninstall the itunes and reinstall for the same reason. I can't upgrade for my icloud account.

Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

Problems installing plug-ins (and even Adobe updates) to Photoshop CS5 Extended on a new Win7 64-bit laptop.Instead, a message box pops up on the CS5 screen saying "could not complete your request because it is not the right kind of document."

Problems installing plug-ins to Photoshop CS5 Extended on a new Win7 64-bit laptop. (Same CS5 and plug-ins installed OK several years ago on a Vista laptop. Now I'm just trying to migrate everything over to the new laptop.) Even some Adobe updates won't install. Instead, a message box pops up on the CS5 screen saying "could not complete your request because it is not the right kind of document." Any solution?

CS5's automatic update mechanism is broken, perhaps because it is no longer updated and can't cope with the newer ways of updating.
So this means you will have make a list of the updates that failed, go here: Product updates
and manually download/install from there.
Gene

Thunderbolt port not working in new Windows 8.1 32 bit install

I have a new HP Zbook 15 G2 that came with 64 bit operating systems for both Windows 8 and 7. I chose to install the windows 7 version, and the thunderbolt port is recognized properly and works fine. Howver due to the need for video capture in a 32 bit system, I chose to install a new windows 8.1 32 bit system on a new ssd. The install went great and everything is updated and working except the thunderbolt port. I have searched for a compatible driver, but I cannot find one. Is there a way to get this thunderbolt port working in this os?

I had a similar issue after upgrading my windows 8 os to 8.1. The volume bar would move, but the actual volume coming out did not change. Downloading the latest windows 8.1 audio driver from Lenovo fixed it for me.
My system: Yoga 11s (4th gen i5), upgraded 8GB DDR3 & 256GB SSD

Is there a 64 bit install for Adobe Reader?

Hello,
I want to make a note that I did a search on the form, using the following text
"Is there a 64 bit install for adobe reader?"
And I did not find my answer. That is why I'm posting this as a question.
So, with that out of the way....
I am getting ready to build a new computer for myself, and will be running Windows 7 Enterprise 64 bit. Before I begin, I want to make sure I have all of my software that I want installed, and I am doing research on each program to see if there is a 64 bit version that can be installed. What I would like to do is have as many as my programs that I install be 64 bit as possible. I know that not every program will be 64 bit, but I did want to get as many of them as possible to be 64 bit applications.
As I do want a PDF reader on my computer, and I have used Adobe Reader for years, I started looking on the web site to download the current version. However, I did not see any place that I could download a 64 bit version of Adobe Reader.
That is why I'm here asking. Is there a 64 bit version of Adobe Reader that I can download? If so, where is it on the web site?
This does lead me to a follow up question. Is there a 64 bit version of the Flash Player, as well as the Shockwave player? If so, where can I download them from as well.
Thanks in advance,
--Brian Plencner
[signature deleted by host]

Again, I think you need to check the Microsoft web page, as I was able to find 64 bit versions of IE8 for download.
The URL to access the page is
http://windows.microsoft.com/en-US/internet-explorer/downloads/ie-8
From that page, I am able to select a 64 bit version of IE 8 for the following Operating Systems
-- Windows XP 64 Bit
-- Windows Vista 64 Bit
-- Windows Server 2003 64 Bit
-- Windows Server 2008 64 Bit
Windows 7 is not listed as an option as it already comes with IE8 installed by default.
Looks to me that Microsoft has already released a 64 bit version of IE8.
In fact, I went ahead and downloaded IE8 for Windows 2003 Server x64 bit, and looked at the details of the file. Each microsoft download has a digital signature associated with them, showing a date and time of when the exe was built.
According to what is shown below, IE8 for Windows Server 2003 has been around since Sunday, March 08, 2009.
So, what has adobe been doing since March of 2009? IE8 has been 64 bit for well over 2 years now (it will be 3 in March of 2012). While I know that it does take time to develop new applications, I don't think it would take 3 years for Adobe to come up with a 64 bit version of Reader that could have been built under the 64 bit platform.
--Brian

How can I get my HP DeskJet 6540 to recognize the new ink cartridges I installed?

Hi everyone. I have an HP DeskJet 6540 printer and I replaced the ink cartridges. After I replaced the cartridges, I aligned them and then did a test print. I noticed that the blank ink didn't print. I opened system preferences, and then I opened the printer utility. It says, "Device Status : Pen Failure." Current Supplies Levels says, "The current levels for the selected printer are shown below...Cartridge on the left (tri-color 97) is unknown and the the cartridge on the right (black 96) is missing." Oh, I forgot to mention that the print cartridge light on the left side is flashing. I went to the HP support website and it says that the problem could be an incorrect print cartridge, incompatible print cartridge, or problem with the (left/right) print cartridge. The solution they offered was to remove, inspect and reseat the problem cartidge. It also said to clean the problem cartridge contacts. I did that and it still gives me the same results. I even reset the printer but still got the same results...
So the next thing I try is the OTHER cartridges listed as compatible with my printer which is 94 (black) and 95 (tri-color). I bought the new cartridges, placed them in the printer and I still got the same message from the print utility. I took the latter cartridges back and got a refund and explained that none of the compatible cartridges are working with my printer. I kept the 96 and 97 cartridges in the printer and the light on the left continues to flash so now I'm here asking if anyone knows how I can get my printer to recognize the new ink cartridges I installed? Are there any other solutions that I have besides throwing the printer out of the window? :-)
Thanks everyone ;-)

With all that you have done it does sound like the printer has a fault. If you haven't tried turning off the printer for several minutes, then this would be worth trying (maybe you have done this when you say reset the printer?).
If the cartridge light on the printer flashes when you turn the printer back on then it sounds like a hardware fault - not the driver or the operating system. And this is not usually something a user can resolve so it would need repair. And for the cost of a new printer, why would you bother.
If you plan of sticking with HP and getting another model that can use the 96 & 97 cartridges (let's face it, they often cost more than the new printer), then take the two existing cartridges to the store and see if they will let you check they are okay. No point throwing them out also if they still have a fair bit of ink still in them.

There isn't a new Bridge CC to install via the CC menu app today? Mac 10.8.5 Bridge CC 6.0.1.6

New applications available today for PS CC 2014, AI CC 2014 etc. but no new Bridge application to install? I installed the PS 2014 version but I just checked the Bridge version that is installed and it is 6.0.1.6.
The CC menu "Apps" tab say that Bridge CC is up to date, shouldn't it be version 6.1 bit 6.0.1 ?
Mac 10.8.5
Bridge CC 6.0.1 / ACR 8.4.1

uninstalled Bridge - applications/Utilities/Adobe Installers
restarted CC.app installed new Bridge, then updated via CC.app
Bridge is now 6.1.... but ACR is still 8.4?

Legitimate newly purchased Premiere Elements-10 32-bit install files not available

Friends:
I purchased an $1100 Nikon camera and the deal included OEM PS Premiere Elements 10.
Legit purchase with a CD and legit Serial #.
Can't install because what is Adobe's fault, not the camera vendor's and certainly not mine.
Adobe's own published notice:
"The 64-bit version of Adobe Premiere Elements 10 only installs on Windows 7 64 bit. If you have Windows XP 64 bit or Vista 64 bit, it's necessary to install the 32-bit version. Because the Adobe Download Assistant automatically downloads the 64-bit version in error, it's necessary to download the 32-bit version manually through alternate means."
The problem is that the same holds true for installing on XP Pro SP3 and Adobe makes no mention of it in the above admission.
Then, Adobe's own Solutions 1, 2 & 3 for manual download all fail, even after fussing for days over it.
Even Solution 3, the last ditch option, fails perhaps because Elements 11 is out and Adobe has killed the 10 download Ftp sites.
Files I am unable to download from Adobe (without entrapment by so called Free Dowload sites) are:
http://trials2.adobe.com/AdobeProducts/PRE/10/win32/PremiereElements_10_LS15_win32.exe
http://trials2.adobe.com/AdobeProducts/PRE/10/win32/PremiereElements_10_LS15_win32.7z
How can I solve my dilemma, being denied my right to learn Elements from a legally purchased 10 and being
forced to purchase 11 instead on top it. Fair?
I am requesting Adobe politely to make it possible to download the Adobe recommended two files withou hassles.
I must mention in this context my own (and thousands of others') sad experience with Flash updates. Just follow
my own (and others') posts in Adobe forums. Plus, just read the Internet posts along these lines:
"It's impossible to download anything from Adobe. I have given up and I have given up on Adobe products."
Not that I want to, but I am forced into echoing the same sentiment.
Can anyone help, please ?
Thanks,
Pradip A.

Hello Mr. Wright:
The download now works. Appreciate your help.
The ...7z file is 1.37 Gb long. I have super high speed Fibre Optic Internet connection with Bell. I rarely have the ocassion to download files of this size. After downloading more than 1 Gb, the transfer hung - either at the Client end, or at the Server end. Bell is sending tech Thursday to mitigate some line noise they detected. Hopefully, the stars will fall into the right place before long.
Regards,
Pradip Acharya
Date: Tue, 13 Nov 2012 11:54:11 -0700
From: [email protected]
To: [email protected]
Subject: Legitimate newly purchased Premiere Elements-10 32-bit install files not available
Re: Legitimate newly purchased Premiere Elements-10 32-bit install files not available created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
You can find the 32-bit installer at http://prodesigntools.com/photoshop-elements-10-direct-download-links- pse-premiere-pre.html. Please make sure to complete the Very Important Instructions section prior to clicking on the link to download the file.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4844309#4844309
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4844309#4844309
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4844309#4844309. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

New 945GCM5, unable to install sound device

Hi all, please help,
I used the parts on the list below for a friends PC whose old motherboard was fried by power fault, some parts used, some new.
Anyway, I installed all the parts into his case along with the old hard drive. Formatted and installed Windows XP and then started to install the drivers from the CD for the Intel chipset, Intel onboard VGA drivers, Realtek NIC and Realtek HD Audio driver.
All the drivers installed and recognised the devices except the sound drivers. No matter what I do I can't get windows to install the drivers, it just won't recognise the drivers as belonging to the device.
The device shows up in Device Manager as PCI Device with the yellow exclamation mark to show a problem, when I disable the onboard sound in BIOS it disappears so it is definitely the sound device (onboard Realtek ALC888 chip, I believe).
What I have tried so far,
1. Tried install from CD.
2. Downloaded latest drivers from MSI, and tried install.
3. Downloaded latest drivers from Realtek, and tried install.
4. Tried to update driver from driver tab of device in Device Manager with the above drivers.
5. Formatted and reinstalled XP over again, and tried 1 to 4 again.
Is there a problem with the motherboard? Am I wasting my time?
Is there a way to force the install of the drivers?
Sorry if I've gone on a bit too long! Any help would be much appreciated, I've spent ages trying to fix it!
MB: 945GCM5 V2 (MS-7267 v4.2)
CPU: Intel Celeron D 352+ (3.2GHz, 533MHz FSB, 512Kb L2 Cache, LGA775)
RAM: Crucial 2X512MB, (PC2-4200) 240 pin DIMM DDR2
PSU: Casecom ATX500W
HDD: Samsung SP1203N (master on IDE1)
DVD: NEC DVD/RW ND-3500AG (slave on IDE1)
BIOS: Latest Version H.70 (no settings changed)
OS: Windows XP SP3, v.3264
No overclocking

Quote
OS: Windows XP SP3, v.3264
Your problem may have to do with SP3. There are known problems with SP3 and KB88111 / Universal Audio Architecture (UAA) High Definition Audio class driver.
Try this:
http://www.msfn.org/board/XP-Service-Pack-3-support-t108378.html&st=20&p=720616#entry720616
If that doesn't work, try again with SP2 only.

Firefox 11.0 32bit, Win7 64 bit, FP 11.2.202.233 64 bit install finishes, lists only 11.2.202.228

Hello---
I have Firefox 11.0 32 bit running under Windows 7 Home Premium 64 bit SP1 with all current Windows updates.
I am trying to install Flash Player 64 bit Non-IE installer, version 11.2.202.233.
I close Firefox before installing, installation says it completes successfully, loads Firefox, says Flash Player is working.
I load Add-ons Manager, check installed version of Flash Player, it lists as:
11.2.202.228
Which is obviously the previous version.
I have tried this repeatedly, with exact same result.
I have also tried the links available on Filehippo.com,
on the off chance the Bootstrap Downloader was causing the problem.
The full Non-IE 64 bit install package yielded exact same results as described above.
I would like to complete the install of the new version properly but it doesn't appear to be working.
I have no Antivirus products installed, and I am allowing the Bootstrap Downloader through my Software Firewall,
download and install both register as 100% successful so Firewall is not the issue.
Thanks,
Ferenc

As reflected in my poste (copy below), I am getting the same thing on multiple Windows PC's, both 32 and 64 bit.
BTW, As indicated below, I see Firefox reporting the older version of Flash when I go to the Adobe test page. Where do you see this in Firefox Add-Ons Manager? I cannot see any listing for Flash anywhere in there. Can you please be more specific. Thank you.
=====
http://forums.adobe.com/thread/989773
26 Views 0 Replies Latest reply: Apr 14, 2012 9:21 AM by Evan H. Katz
Evan H. Katz
1 posts since
Apr 14, 2012
0
Apr 14, 2012 9:21 AM
Firefox 11 Not Reporting Correct Version of Flash v. 11.2.202.233
This question is Not Answered.(Mark as assumed answered)
Today (April 14, 2012) I installed the new Adobe Flash v. 11.2.202.233 on four computers (several Mac and several PC/Windows).
Eveything went fine except that Firefox does not seem to have the new Flash on any of the Windows PC's (it worked fine on Mac). That is, when I go to the Adobe test page (http://www.adobe.com/software/flash/about/), it is reporting that Firefox is using the immediately prior version 11.2.202.228. However, all other Windows browsers (e.g., Opera, IE, etc.) all report the correct version on that test page.
And I checked Windows Programs and Updates and it shows version 11.2.202.233 installed.
So, why is Firefox 11 showing the old version? Anyone have any ideas and hopefully a fix?
Adobe, you should fix this.
Evan Katz (EKatz at CrawfordVentures.com)

New Apple 64 bit Windows 7 BootCamp Drivers!

I, like several hundred thousand others have been patiently waiting for the promised 64 bit Win 7 boot camp drivers. I have still heard no announcement since the one that said they would be available before the end of 2009.
Well, today I purchased a new 2.53Ghz Mac Mini at the Atlanta Apple store, and was surprised to find that the installed OSX was the current 10.6.2, be even more surprised to see that the boot camp drivers on the install disk were dated in November. Another identical Mac Mini purchased in November had boot camp drivers dated in July.
I went ahead and partitioned for boot camp, and ran the 64 bit Windows 7 OEM installation. It ran just fine. I was really surprised to find that the boot camp setup program on the new Mac Mini disk installed 64 bit drivers without hesitation, and it seems to work just fine.
So, I guess they will be in general release quite soon, but I am happy to have mine, and will use it to install my other versions of Windows 7 on my MacBook Pro and IMac.
Finally!!!

After running the boot camp assistant, I get the same message that you have received, that Boot Camp allows the running of Windows XP or Vista. Windows 7 is not mentioned.
I am not sure what that really means, though, since that is a message from within OSX 10.6.2, which is unchanged. The problem for me has previously been with the Windows Boot Camp drivers after the installation of 64 bit Windows 7, when I got a message to the effect that the version was not supported, and it would not run the driver installation program on the Windows 7 side of Boot Camp. I never had a problem running the MS 64 bit Windows 7 installation disk program, I just couldn't get the needed drivers to load in the prior version of the 3.0 driver which is dated in July. I do not have the build on the older version that was supplied to me with the prior Mac Mini purchased in November.
At this point, when I run the 3.0 Boot Camp installation drivers after installing 64 bit Windows 7 from the MS install disk, it installs normally, and seems to be running just fine. I cannot, of course, vouch for whether these are the final drivers for Boot Camp, and I rather suspect they are not.
But at least they allow me to install a working version of 64 bit Windows 7, which I have not been able to do since Windows 7 left beta.

Tried to open a file I created in Numbers a while ago which I modified on 11/4/13 and got a message that I needed a newer version of Numbers. When I went to the Mac App Store it shows that the new version is already installed. Any suggestions?

Tried to open a file I created in Numbers a while ago, which I modified on 11/4/13, and got a message that I needed a newer version of Numbers. When I went to the Mac App Store it shows that the new version is already installed and there doesn't seem to be a way to reinstall it. When I checked "About Numbers" on my MacBook it shows "Numbers '09 version 2.3". Any suggestions as to how I can get the new version installed?

Are you launching Pages from an icon in your Dock? Installing the update does not change the Dock icons & it does not remove the older versions. Go to your Applications folder & launch the new Pages from there.

HT4097 My iPad mini says it requires version 10.7. I have 10. 6. 3 - When I try to update to 10.7. it says a newer version is already installed.

My iPad mini says it requires version 10.7. I have 10. 6. 3 - When I try to update to 10.7. it says a newer version is already installed. How do I get my I tunes to accept my IPad mini?

Are you using a Mac computer...?
If so... On the Mac...
Click on the Apple icon.. Top left in Finder...
 > About this Mac > Version...what does it say?

I am trying to reinstall iTunes but everytime I try to reinstall it, it is telling me that I can't because I have a newer version of Quicktime installed. The problem is that I cannot uninstall this, please help.

I have just purchased an iPhone 4, but it wasn't connecting to my iTunes, so I took advice and uninstalled iTunes. But when I am trying to reinstall iTunes, it keeps telling me that I cannot because I have a newer version of Quicktime installed. I cannot find this newer version anywhere, and have gotten rid of the Quicktime folder, but it is still refusing to install iTunes.
Please help, I have tried everything.

But when I am trying to reinstall iTunes, it keeps telling me that I cannot because I have a newer version of Quicktime installed.
That's usually caused by damaged QuickTime installation configuration information on the PC.
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

What query should I use to find all versions of Office 2013 64-bit installed on client computers?

What query should I use to find all versions of Office 2013 64-bit installed on client computers? Could someone create a custom query? I need all of the client computers names and which ones have any Office 64-bit components. Thank you so much! I really
appreciate it!

Hi,
You could edit the following query to meet your requirement.
SELECT     dbo.v_R_System.Name0, dbo.v_GS_OPERATING_SYSTEM.Caption0 AS [Operating System],
                      dbo.v_GS_OPERATING_SYSTEM.CSDVersion0 AS [OS Service Pack], arp.DisplayName0,
                      CASE WHEN arp.version0 LIKE '11.0.6361.0' THEN 'SP1' WHEN arp.version0 LIKE '11.0.7969.0' THEN 'SP2' WHEN arp.version0 LIKE '11.0.8173.0'
THEN 'SP3' WHEN
                       arp.version0 LIKE '12.0.6215.1000' THEN 'SP1' WHEN arp.version0 LIKE '12.0.6425.1000' THEN 'SP2' WHEN arp.version0 LIKE '14.0.6029.1000'
THEN 'SP1' ELSE '' END
                       AS 'Service Pack', arp.Version0
FROM         dbo.v_Add_Remove_Programs AS arp INNER JOIN
                      dbo.v_R_System ON arp.ResourceID = dbo.v_R_System.ResourceID INNER JOIN
                      dbo.v_RA_System_SMSInstalledSites AS ASSG ON dbo.v_R_System.ResourceID = ASSG.ResourceID INNER JOIN
                      dbo.v_GS_OPERATING_SYSTEM ON dbo.v_R_System.ResourceID = dbo.v_GS_OPERATING_SYSTEM.ResourceID
WHERE     (arp.DisplayName0 LIKE '%Microsoft Office%edition%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Standard 2007%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Enterprise 2007%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Professional%2007%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Standard 2010%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Enterprise 2010%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Professional%2010%' OR
                      arp.DisplayName0 LIKE 'Microsoft Office 2000%' OR
                      arp.DisplayName0 LIKE 'Microsoft Office XP%') AND (arp.DisplayName0 NOT LIKE '%update%') AND
                      (arp.DisplayName0 NOT LIKE '%Microsoft Office XP Web Components') AND (dbo.v_R_System.Operating_System_Name_and0 NOT LIKE '%server%')
AND
                      (arp.InstallDate0 NOT LIKE 'NULL')
ORDER BY dbo.v_R_System.Name0, arp.DisplayName0, arp.Version0
Full details:http://social.technet.microsoft.com/Forums/systemcenter/en-US/7baeb348-fb63-4115-8d76-2c884d18f708/sql-query-to-check-ms-office-service-pack-level?forum=configmgrreporting
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

New LR3 64 bit install misbehaving!

Similar Messages

Maybe you are looking for