New M5000 server - Can't get bge0 to work in the OS

Just recently powered up a new M5000 server. Went through the setup process of setting the networking details of the management card - which I believe also works through ethernet0 (LAN#0). That is working just fine and is what I have used to access the system console. Single domain, nothing odd in the configuration.
The pre-installed Solaris sees bge0 and bge1. It also shows the ppp connection for the dscp.
if config shows a normal adapter config but without the RUNNING flag. cfgadm shows the drivers properly loaded. There are cables connected to both NIC cards. The same result, btw, on the bge1 card. The NIC's show activity LED's so there is definitely a physical connection there.
What else can I provide to get assist anyone in helping me solve this problem?
Thanks
Norm Dressler

Hi all, I'm new to the forum
Have installed the above mentioned server running the x86 platform with Solaris 10 1/08 with broadcom ethernet adaptor cards.
My network connections are giving issues. bge0 and bge1both show physical activity and these are my configs
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 192.168.1.170 netmask ffffff00 broadcast 192.168.1.255
ether 0:11:25:22:1f:26
bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 10.0.0.1 netmask ffffff00 broadcast 10.255.255.255
ether 0:11:25:22:1f:27
My default router also exists
# vi /etc/defaultrouter
192.168.1.254
~
The hosts file
# vi /etc/hosts
::1          localhost
127.0.0.1 localhost
192.168.1.170 hostname1      loghost
10.0.0.1      hostname1
~
~
And the device files
# vi /etc/hostname.bge0
hostname1
~
~
# vi /etc/hostname.bge1
hostname2
~
~
All these including restart procedures aren't working.
I dont seem to be able to get to other devices on the network yet the local TCP/IP stack behaves just OK. I can ping all the interfaces but cannot ping any device on the network.
During install too, I attempted to acquire a dhcp address via the network from a dhcp server that serves IPs to our network but failed thus proceeded to static addressing.
Any advice please?

Similar Messages

I have a pioneer 50 inch plasma   I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.   The receiver has two HDMI inputs in the back.

I have a pioneer 50 inch plasma + I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.
The receiver has two HDMI inputs in the back. However they say they are not for PC's. Furthermore they must be set up by going to the home menu.    I tried everything, but I can not get the receiver to talk to the Apple TV. I even tried a connector that uses an HDMI to the Apple TV that has the other side of the cable as 5 RCA cables. I could not get the receiver to see the Apple TV.   I have a newer TV in the house, it has no problem talking with the Apple TV. But this older system seems to be handicapped in its ability to talk with the newer Apple TV system.
My Email is [email protected]
Do you have any suggestions
Thanks
Bob

I could not access the Apple TV on the television.   If I put the Apple TV directly into by TV, I have an external sound system (entertainment system), therefore I worry that I would by pass the audio.
Thanks for taking your time to attempt to help!   Any more suggestions would be greatly appreciated.
Bob

I'm trying to have existing Exchange accounts setup on my new iMac and can't get it to work.

I have existing Exchange accounts setup on my iPhone and iPad to access my work email. I'm trying to do the same on my new iMac and can't get it to work. I have it setup the same as my iPad and it asks me for my password over and over...any suggestions?
<Re-Titled By Host>

Hi mwatts18,
As a preliminary troubleshooting step, you should reference the information in the following article:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/TS3276
I would especially suggest that you delete the account and re-add it, making sure that you are entering the correct password when you add the account. Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

I can't get Illustrator to work in the Yosemite Beta. Can anyone help?

Hi there,
I can't get Illustrator to work in the Yosemite Beta. Can anyone help?
Much appreciated,
Jon

Thanks so much for reaching out!!!!
Here’s what I am experiencing more specifically:
1. Illustrator is not showing up in my Application folder.
2. My creative cloud app manager says that Illustrator is installed.
3. I try to download it from Adobe.com and it never initiates the download.
Does that ring any bells?
Thanks so much for your help!
Grateful,
Jon
Jonathan Bailey
Co-founder at Lightstock
(214) 284-2597
@jonathanrbailey
On Wed, Oct 1, 2014 at 5:08 PM, Monika Gause <[email protected]>

How can I get Live TV working on the new Android app

I have FIOS for internet and TV but do not use the Verizon router for WIFI (it is too slow and does not cover enough of my house). I just downloaded the new Android version of the My FIOS app with Live TV, but it will not let me view TV and tells me that I have to be connected to the FIOS router. The router I use for WIFI is connected to the FIOS router via ethernet. The app has asked for and received my Verizon credentials. So why won;t the app let me watch Live TV?

I have the same setup and the same issue.
Looks to me like the app isn't smart enough to make the double hop to the VZ router.
I changed my connection to connect directly to the VZ router and at least it now attempts to connect but still cannot get it to work - probably the now the signal is so bad that it never makes a connection.

New iPod Touch, Can't get iTunes to work, extra headaches

Hello,
This is my first day in the Apple world: I caved and thought it would be good to get a new mp3/video player after my last one died. I ended up getting a 4th Gen Black iPod Touch - not sure if the color matters, but why not?
Anyway, my second problem (first being the weird packaging, of tape through plastic then stuck on) started with iTunes: the thing just would NOT download. Every time I tried, the website kept saying "There is a problem with this Windows Installer package. A program required for this install to completecould not be run. Contact your support personnel or package vendor." That's just great: I can't get any music or video ONTO my iTouch without iTunes...right?
After browsing around I found an older version of iTunes that seemed to work. Yay! But not really. Nobody ever mentioned that .flac and .avi files can't be imported into iTunes at all...so I had to go hunting online for third party converters. This took care of THAT problem...
However, now that conversion is up, the older version of iTunes won't pick up my iPod Touch and Sync it. There is actually a "Sync iPod" button under "File" tab, but it's grayed out and I can't use it.
Not entirely sure if this is why, but according to a few people, when a new iTunes comes out, the older one stops functioning as fully as it originally did, forcing people to upgrade their iTunes in order to make it work like normal.
I tried to find a third party program to pick up my iPod Touch so I could upload files, but no luck. I feel like an idiot for not knowing how to turn source code into a program, and the binary installers I did find were user-hostile (ie. Right clicking to bring up a menu actually plays the movie and there's no stop button, you have to end task from the task manager). Windows Explorer only shows one folder in my iPod Touch, which is empty and four letters long, which gives no clue as to what it is.
So here's my big question: now that I finally am fully ready to upload my files to my iPod Touch, I can't. Why?
Is it my version of iTunes? Why can't I download iTunes' newest version? Why does updating from the older version yield the same result (though I'm sure both installers are the same)? Is there another way to get all my media onto my device?
Thanks in advance...talk about a four hour headache...

I've used the Reset Network Settings feature in my iPod Touch after every failed attempt to connect to my wireless network. I've also reset the wireless access point and router after making changes to them.
It appears that my Touch is finding the wireless network, accepting the security password/key, and connecting to the wireless access point and router (I get a full signal on the strength indicator). However, the Touch appears to be acquiring the IP Address automatically, right? Thus, it gets the IP Address starting with "169". If I can manually set up the TCP/IP settings, I believe I can get it to connect. Is there a way to set up the TCP/IP settings manually?

I bought a magic mouse today, they told it would work with the new iPad, I can't get it to work for me, does anyone know how or if it works?

I bought a magic mouse, was told it works with the iPad, how can I get it too?

A mouse, which is a pointing device, will not work with an iPad...there is no cursor for the mouse to move around. You must use the touch screen.

HT4929 OS 10.5.8: Can't get mail to work using the recommended icloud settings

Grandma has a G5 imac running 10.5.8 and a .mac account under my master account. Moved her to icloud today, and can login via icloud.com and can see her mail there. Read the article, and using 'Mail' (Vs 3.6)on her mac, deleted her old .mac account, and tried to set up a new account manually, using the settings in the article:   imap.mail.me.com, SSL on, her usual user name, and her password (which, btw, works fine on the icloud.com site)
Also, for outgoing, used smtp.mail.me.com, SSL, etc, etc
Tried it 5 times, doesn't work.
Watched a youtube video, where it worked, followed exactly, didn't work! Help, anyone?   Thanks

I found the answer to this problem on a Nov 2011 posting. Amazing that the current icloud migration notices don't clarify this:
If you were to start a brand new icloud account, they would require at least 8 characters, upper and lower cases, including numbers. If however you are migrating a .mac or .me account to icloud, your old password may not meet those requirements. So, icloud keeps rejecting the attempt to set up an account via the 'Mail' app.
You need to go to   http://appleid.apple.com     to sign in with your old password, then change to one meeting the new requirements. Do not use http://iforgot.apple.com
Thanks to DendeNYC!!!!

I have a xD-PictureCard that I want to load pictures onto, from my iPhotos. The reader is a FinePix can I get it to work on the Mac. when I try it wont install the software. Is there any way i can load pics onto the SD card.

I have a xD-PictureCard (SD Card) that works in a picture frame. I have used it in the past on a Windows computer, now having an apple I want to change the pics and cannot. When I reload the discs for Mac they won't install. Is there anything I can do to put the pics on the SD card, I don't want to throw away the picture frame it cost a lot of money.

This should be perfectly possible and without loading any software at all.
Get a Card Reader for the XD card, and plug it into the Mac. It will then appear on the desktop. Drg the files to the Card. Make sure you keep the folder structure used on the Card - don't change that.
Regards
TD

Can I get my InDesign work to the web or to Dreamweaver?

I am helping a production company with their web sites. At present, a staff member there has created hundreds of pages for print in InDesign. He also went so far as to create how they want the web sites to look and he did all of his work in InDesign. Now, we need to get all of that InDesign work to the web, hopefully without having to create it all again in Dreamweaver.
So, how can I get all of these hundreds of pages that are already done in ID, over to DW without having to recreate them all?
In ID, I DO NOT SEE an export to Dreamweaver like so many forums state.
Also, I do not see a PACKAGE --- Export feature as I saw on another post. So, I must be missing something. I'm working in CS5 Design Premium.
We tried copy and paste and we tried export (that got us the text but nothing else) and we've tried everything else we can think of.
Any ideas? I know lots of people have to have tons of stuff in ID that needs to go to the web after the fact.
A little help here...
Thanks
Cliff

I'd be one of the last people to suggest that it's a good idea to use InDesign for Web design, but if that is where you're starting from, with CS5.5 it isn't entirely hopeless. You can use the Edit All Export Tags command on the paragraph styles fly-out menu to map styles to sensible HTML tags (headings to h1, sub-headings to h2, ...) and add classes where appropriate to hang some styling on. Provided that your documents use a consistent set of styles, you'd then just have to create a single CSS stylesheet that you could use for every HTML document you exported. You could import the mappings into all the documents so you'd only have to do it once.
If the documents don't use styles consistently, of course, your case is hopeless.

Can anyone get lion to work with the older intel core duo iMacs?

Has anyone been able to get Lion to run on the older Intel Core Duo iMacs?

http://osxdaily.com/2011/04/08/hack-mac-os-x-lion-for-core-duo-core-solo-mac/

New computer how can I get my old purchases on the new computer?

I got a new computer, but don't know how to get my itunes to transfer my purchases over to new computer and don't want to lose all my music... can someone help?

Go to the iTunes Store and select "Purchased" from the Quick Links side bar on the right. Go through all the tabs to download again for free

I can't seem to get my Windows 7 Box to "see" the NAS where my music and movies are stored. This ran fine on W XP. After I installed iTunes on my new machine, I can't get it to "see/recognize" the NAS drive. 5 other computers can. Any Ideas ?

I have a mix of Apple and Windows Boxes. The primary NAS is a 2TB Buffalo Unit. The back-up NAS is a QNAP with 6TBs (set up as Raid 5). Until I removed my old 32 Bit Dell machine today, all the rooms in the house got excellent delivery of audio or video, via Apple TVs, which then run into DACs and amps, and the rest of the gear. The 32 Bit Box was failing on some boots, so I got a new machine. I installed 64 Bit iTunes on it, but cannot get it to recognize the NAS Box. It's like the setting took, as I can see it, however, it "appears" that iTunes is looking elsewhere for the media. I would really prefer not to reload all 850 CDs, and redownload the 56 movies from iTunes.
Is there something that changed in 64 Bit iTunes ? years ago, iTunes would sometimes boot and really want to find the music under Documents and Settings..... but that seemed to sort itself out.
Bill O 6TB

I have a mix of Apple and Windows Boxes. The primary NAS is a 2TB Buffalo Unit. The back-up NAS is a QNAP with 6TBs (set up as Raid 5). Until I removed my old 32 Bit Dell machine today, all the rooms in the house got excellent delivery of audio or video, via Apple TVs, which then run into DACs and amps, and the rest of the gear. The 32 Bit Box was failing on some boots, so I got a new machine. I installed 64 Bit iTunes on it, but cannot get it to recognize the NAS Box. It's like the setting took, as I can see it, however, it "appears" that iTunes is looking elsewhere for the media. I would really prefer not to reload all 850 CDs, and redownload the 56 movies from iTunes.
Is there something that changed in 64 Bit iTunes ? years ago, iTunes would sometimes boot and really want to find the music under Documents and Settings..... but that seemed to sort itself out.
Bill O 6TB

Upgraded to Mavericks and installed new iphoto but can't get iphoto to work

I have not been able to open my iphoto library with the current version after installing Mavericks and purchasing/installing iphoto 9.5
Here's the system info: iMac (from Dec. 2007)
2.8 GHz Core duo
4 GB SDRAM
OS X 10.9.1 (as of yesterday)
Iphoto 08 (7.1.5) lived on a network drive ( Lacie cloud drive) shared between a pc and a mac.
Upgraded to 9.5 yesterday
I used time machine backup before installing Mavericks and proceeded to try to upgrade iphoto. However, I did not make a backup of my system after this installation and before I installed the new iphoto. Does Time machine backup iphoto files located on a network drive? Does it matter that the backup was made with snow leopard and not Mavericks?
I followed instructions on a thread indicating that iphoto Library upgrader 1.1 should be used to prepare my old library prior to opening with iphoto 9.5.
When I double-clicked the upgrader it gave me this message:
Your library can open with the current version of iPhoto and does not need to be prepared with this tool.
I noticed that the iphoto icon has already changed from orange to blue.
OK- great! So I go to the freshly installed iphoto and try to open my library and get this message:
The photo library needs to be upgraded to work with this version of iPhoto.
Your photo library will not be readable by previous versions of iPhoto after the upgrade. The upgrade process for very large libraries may take an hour or more to complete.
Alright, so I click the upgrade button and I get the beachball of death for about 15 minutes and then see a message that says:
Examining photo library- Examining with the beachball of death goes on for another 10 minutes and then iphoto just crashes and closes.
Back to searching through threads- Ah- try option + cmd while opening iphoto to rebuild the database but then get this message AGAIN:
The photo library needs to be upgraded to work with this version of iPhoto.
Your photo library will not be readable by previous versions of iPhoto after the upgrade. The upgrade process for very large libraries may take an hour or more to complete.
And so, the cycle continues....
After reading through a few other discussion I discovered that the iphoto library should have been on a drive formated as Mac OS extended (journaled)
So- I format an external harddrive as Mac OS extended (journaled) and proceed to copy the iphoto library (234 GB) onto the external harddrive and after about 30 minutes I received this message:
The operation can’t be completed because an item with the name “iPhoto Library” already exists. I click OK and everything stops and shuts down.
Is it possible to get rid of Mavericks and go back to my original iphoto 08 using the time machine backup? If so, should I then use the upgrader before installing Mavericks and the new iphoto?
At this point I have no clue how to proceed. I am trying not to panic but this process is starting to drive me a little bananas and my brain is slowly, but surely, melting away.
Please help save my sanity. Please.
Thank you.

The problem is the library has been damaged from sitting on the Network Drive, and frankly, returning to the old OS won't change anything, nor will downgrading iPhoto. You're going to have this issue once you try and move the Library, or update it in any way, and - even if you stick with the old version of iPhoto, you're going to start having issues just saving edits, sharing and so on.
So, you're between a rock and a hard place.
I've no idea if TM backs up material on a NAS, but I do know that it can be set to back up externald rives. I'm somewhat surprised that you don't know, as this is your back up system that you created and the easiest route out of this situation. NOw there's only one way to find out.
So, my first effort would be to try restore the Library from TM to the correctly formatted drive:
http://support.apple.com/kb/HT4927?viewlocale=en_US&locale=en_US
will help with that.
If that doesn't work or is not possible, your next effort is to try rebuild the Library to the correctly formatted drive:
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
If that doesn't work, then you're recovering the masters from the Library and starting over from scratch.

New M5000 server - Can't get bge0 to work in the OS

Similar Messages

Maybe you are looking for