New Mac - Migration Assistantat not working...metadata?

Hi there,
Got myself a new Mac and Migration Assistant just didn't play ball. Not sure why - could have been me upgrading fro a 10.4 PPC G5 to Intel 10.5...
Anyway, ended up dragging and dropping across the network. Got all my music, but no metadata - playcounts etc. The old Mac is still in operation so I can access file son it etc.
Any ideas on how I can get the metadata appended to the songs on my new Mac?
Thanks,

Here's how to get the metadata accross. On the new Mac, you're going to have to start over with movin your library. Go to Home-> Music-> iTunes and delete everything there.
On the old Mac, go to Home-> Music-> iTunes. Copy everything in that folder to the same location on the new Mac. This will put all your music (that was in your iTunes music folder; you'll have to copy files that are in other places separately) into iTunes, and keep all your metadata, games, artwork, etc.

Similar Messages

TS2972 I can see the song titles in itunes shared library on my new imac but songs will not play. I have a pc with wifi network that the main music library is on. tried saving songs from pc to an external drive then to new mac but thats not working eithe

attempted to transfer itunes music from pc to new imac. didn't work. apple suggest using sharing method. main library of music is on pc. did those steps and shared library shows up on mac but when you click on the song to play it doesn't play or maybe ther is no content? any suggestions?

Hi there,
It sounds like your purchased content is not transfering via a flash drive. It may be easier to re-download this contnet directly from iTunes. Take a look at the article below for mor information.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
-Griff W.

New Exchange Migration Does Not Work Properly After Old Exchange Services Shut Off

Moved Exchange 2013 SP1 mailboxes, system mailboxes, public folders and OAB to new server with Exchange 2013 SP1. Followed all the suggestions here:
https://social.technet.microsoft.com/Forums/en-US/1bdf67a1-ad0e-4e96-922f-3778d6bd8e98/move-exchange-2013-to-new-virtual-server-including-settings?forum=exchangesvrdeploy
Problem is when we shut off the old exchange server services, no mail flows and can not reach OWA. It seems as though the servers are "coexisting". I say coexisting because all the firewall rules point to the new server, all the settings in ECA/ECP
point to the new server, all the DNS records point to the new server. We need to be able to run exchange on the new server without the old server running. Is there something I left off?

I would hold up on decomming the old environment until you make sure you have all the dependencies removed from it. I have done a number of migrations to 2013 and I always shutdown the old environment for atleast a day to make sure I caught everything.
When you say you can't reach OWA is that internally or externally? As for the mail flow thing, I think you might need to check your send connectors and receive connectors. These don't get created/updated
with Also, if you have a 3rd party hygiene solution (like a postini or mimecast) you will need to contact them and have them allow the new public IP for the Exchange 2013 environment (or setup a NAT Rule that translates old public IP to new Exchange
Server. )
Ok, i turned off the old server and email DOES flow to and from intranet/internet. And i can get to most OWA pages. However, there is at least one that i can not make it to. We host email here and every domain has this syntax:
https://mail.theirdomainhere.tld
Like i said, the external DNS records for this particular domain does reflect the public ip of our router. Our router then sends that connection to the new exchange server.

Bought new mac pro, does not work with sims 3.

I bought a mac pro 13" today with 2,4 Ghrz, 4 GB RAM. I bought sims 3 pets and installed it. But I can't play it properly. All the settings are on low, and there are no details. When I set it on high my sims flashes, and the game goes slowly. What can be the problem??

http://forum.thesims3.com/jforum/posts/list/407986.page this is where you should be asking this question. seems like they need to fix some bugs with Lion.

Bought a new Mac, migrated data, now CS4 doesn't work. Why?

I bought a new Mac, had the Apple guys migrate my data and apps to it. Now CS4 doesn't work.
I researched a bit and found that I SHOULD have deactivated and uninstalled CS4 from my old Mac. I've now done that.
But do I have to uninstall CS4 files from my new Mac now--and reinstall? Will that work?

Hi,
I have a question related to one you answered above: "bought a new Mac, migrated data, now CS4 doesn't work."
My situation is a little different. I am hoping you can help me with it. I hope I am not violating any protocols by asking you specifically? A year ago I reinstalled my Mac's operating system. My CS4 is on my computer under "Previous System." I am unable to open it from there and I do not want to attempt migrating it for reasons noted above. I did try to reinstall it as you suggested to hbrady67 by dowloading from CS4 products with my serial number but I got this message: "Upgrade Check We looked in the default location for qualifying products installed on the machine, but none were found. You may verify upgrade eligibility now by completing the fields to the right. 1) Select a product you already own. 2) Enter a serial number for this product. CS4 wasn't in the list of selections. The protocol suggested won't work for me since I am not doing an upgrade but trying to reinstall what I already have. Can you direct me on where to go/what to do? Thank you very much. Bergi.
I found the solution to this problem. I was able to download the trial version of what I have and enter the serial number from there. However, it still asked for a serial number from previous software: "your setup is for an upgrade version of Adobe Creative Suite 4." (I entered the serial number that I have for CS2. And it was accepted. Thank you. Bergi

Adobe Illustrator CS6 serial number does not work on my new MAC. It does work on my old MAC.

I have Adobe Illustrator CS6 installed on my new Mac but the serial number does not work.
Do I need to remove the program on the old Mac first?

Thanks for you reply
Then I do not understand why the serial number does not work? I have tried to type it several times.
Regards
Einar Tyholdt
9. jan. 2015 kl. 16:16 skrev Monika Gause <[email protected]>:
Adobe Illustrator CS6 serial number does not work on my new MAC. It does work on my old MAC.
created by Monika Gause in Illustrator - View the full discussion
You can install it on two computers simultaneously, so uninstalling is not needed if it's the only other installation.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7080891#7080891 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7080891#7080891
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Illustrator by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

ITunes on new Mac Mini does not show shared libraries on network or songs on NAS drive

iTunes on new Mac Mini does not show shared libraries on network or songs on NAS drive
The latest version of iTunes on a 3-month old Mac Mini (8 gig RAM, OS 10.10.2) does not see any of the shared iTunes libraries on a MacBookPro (MBP) (OS 10.9.5) and a 14-month old Mac Mini (OS 10.9.5). And a network shared drive/media server does not appear as well. I have a Gigabite Ethernet G4 and on it, the MPB and the "old" mini I can see the various shared music libraries and NAS, but not on the new Mini.
The little house with a music note inside it that I see on the upper left corner of the iTunes 12.1 window on my MBP does not appear on iTunes 12.1 on the new Mac Mini. I have gone through all the iTunes preferences and can not find where I can turn on this feature. The new Mac Mini is on the local network and I can reach the internet successfully.
I have been using iTunes since its beginning (still have a PowerTower Pro with a working copy of SoundJam), so I am not a newbie, but this has me baffled.

May I add, that I gave full rights to the user at the Mac Mini to access and change data on the server drive for ITunes Media.

Do I have to buy Lion or snow lepoard or is there a way to updated from OS X 10.4.11?? I have a new ipod that will not work without the ne itunes, but the new itunes will not install without a newer vesion of Max OS X. Help please :)

Do I have to buy Lion or snow lepoard or is there a way to updated from OS X 10.4.11?? I have a new ipod that will not work without the ne itunes, but the new itunes will not install without a newer vesion of Max OS X. Help please

Need to know your Mac model. If it's a PowerPC, the max OS is Leopard 10.5.x. If it's an Intel procesor, you can upgrade to Snow Leopard (for $29) & later to Lion.
*Mac OS X 10.5 Leopard installation system requirements*
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store *but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753)*.
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
 Cheers, Tom

MAC Authentication does not work

My MAC Authentication does not work.
I have a ACS 3.0 server set. the MAC address is set in the user name field and in the password field.
I can ping the ACS, I can ping my AP, I can ping my client.
I don't want WEP and I don't want LEAP just MAC. So I set my authentication to "Open with MAC" My client has WEP set to NO WEP and authentication to OPEN
I have the latest drivers for both AP and my 350 Client.
I see that the client is associating and disassociating back and forth non stop. My AP log is full with the following message:
Station 0009.7c9f.xxxx Authentication failed
this is my config:
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname GOM_1200IOS
aaa new-model
aaa group server radius rad_eap
aaa group server radius rad_mac
server 10.1.2.197 auth-port 1812 acct-port 1812
aaa group server radius rad_acct
aaa group server radius rad_admin
aaa group server tacacs+ tac_admin
aaa group server radius rad_pmip
aaa group server radius dummy
aaa group server radius wlccp_rad_infra
aaa group server radius wlccp_rad_eap
aaa group server radius wlccp_rad_leap
aaa group server radius wlccp_rad_mac
aaa group server radius wlccp_rad_any
aaa group server radius wlccp_rad_acct
aaa authentication login eap_methods group rad_eap
aaa authentication login mac_methods local
aaa authentication login wlccp_infra group wlccp_rad_infra
aaa authentication login wlccp_eap_client group wlccp_rad_eap
aaa authentication login wlccp_leap_client group wlccp_rad_leap
aaa authentication login wlccp_mac_client group wlccp_rad_mac
aaa authentication login wlccp_any_client group wlccp_rad_any
aaa authorization exec default local
aaa authorization ipmobile default group rad_pmip
aaa accounting network acct_methods start-stop group rad_acct
aaa accounting network wlccp_acct_client start-stop group wlccp_rad_acct
aaa session-id common
enable secret xxxxxx
username Cisco password xxxx
ip subnet-zero
iapp standby timeout 5
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption key 1 size 40bit 7 9DF1C10BF11A transmit-key
ssid GOM_1230
authentication open mac-address mac_methods
speed basic-1.0 basic-2.0 basic-5.5 basic-11.0
rts threshold 2312
channel 2462
station-role root
no cdp enable
dot1x reauth-period server
dot1x client-timeout 600
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
no cdp enable
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 172.16.43.45 255.255.240.0
no ip route-cache
ip default-gateway 172.16.47.254
ip http server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag/ivory/1100
ip radius source-interface BVI1
access-list 700 permit 000a.b74c.e8c9 0000.0000.0000
access-list 700 permit 0009.7c9f.d6e0 0000.0000.0000
access-list 700 permit 0006.25b1.2f79 0000.0000.0000
access-list 700 permit 000a.b78b.2d19 0000.0000.0000
access-list 700 permit 000b.5f6e.77c8 0000.0000.0000
access-list 700 deny 0000.0000.0000 ffff.ffff.ffff
access-list 701 deny 000b.5f6e.77c8 0000.0000.0000
access-list 701 permit 0000.0000.0000 ffff.ffff.ffff
no cdp run
snmp-server community GOM_AP1230 RO
snmp-server enable traps tty
radius-server local
group AP1230
user brazil nthash 7 1249523544595F517972017912677A3055325A25770B08770D5C5B4E4478087605 group AP1230
radius-server host 10.1.2.197 auth-port 1812 acct-port 1812 key 7 00233C2B
radius-server retransmit 3
radius-server attribute 32 include-in-access-req format %h
radius-server authorization permit missing Service-Type
radius-server vsa send accounting
bridge 1 route ip
line con 0
line vty 5 15
end
What is wrong?
Thanks very much for your help.

I figured out what was wrong so thank you for stopping by.
I will publish the config for other people to see.
Regards,

10.4.4 Mac Help does not work

I just upgraded 10.4.3 to 10.4.4. Now Tiger Mac help does not work. Other software help does work, at least those I have checked like Word, Safari, and a few others I have checked. But in the Finder going to help in the Menu bar does brings up the help window, but try to click a link like What's new in Tiger or typing a query into the search window produces nothing. All the software seems to be working fine, at least what I have checked. I have redownloaded and re-installed making sure virus software is off to no avail.
Any help would be appreciated.

I tried the steps mentioned before, and thought I would give them one more try. Initially, I had success in that the Help Viewer opened to the default Mac Help view, and when I typed in a find term, lo & behold a list of results appeared! Alas, my visions of success vanished when I clicked on one of the results, then View.....nothing happened!
I returned to the main menu, and found none of the links would work, and neither would the search function!
It appears a link may work the first time, but none after that.
I also noticed that (repeating the Cache & Preference removal steps) that they repopulated with the files when Mac Help was initiated, and, as before, would allow one link acivation to occur, but none after.
I suspect there may be a conflict with some other applications Help feature, but made sure to activate ONLY the Mac Help with no other Application having been run after restart. The only other possiblity is that some toolbar non-Mac OS X help apps like Magic Menu, Quicken, & iPod conflict, but these are all I have!
If any one having this Help Viewer problem has similar installations, or knows of any conflicts with these; or, how I can temporarily disable/remove the associated help without uninstalling them, please post a reply.
Powerbook G4 (17") Mac OS X (10.4.4)

My new mac mini does not see usb drives, but in hardware info the usb is visible

my new mac mini does not see usb drives, but in hardware info the usb is visible
i'tried several usb flash drives even brand new ones, they are visible onder hardware info but they are not on the desktop nor in the finder.
what is wrong and doe anyone has a solution ?

It does not show up in disk utility, its only visible through systeminformation.
When you plug in the USB flash drive and then refresh systeminformation it becomes visible.
To remove it I shut down the computer because I cannot eject the USB device anywhere.
After starting up again when I have removed the flash drive it has gone from the systeminfo USB list.
By the way my USB mouse and keyboard are working fine, I also changed ports of these and they still keep on working so I don't think the USB ports are defect.
I guess it some kind software problem, and because I'm new to Apple I do not know much about it how to solve this.

My new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?

my new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?

A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare. They will help you.
Best.

My New Tab Page does not work at all. I just have the empty squares with nothing in them at all?

My New Tab Page does not work at all. I just have the empty squares with nothing in them at all?
I know how to use about:config & have had the usual problems with newtab page tiles but this is more like a bug- using 33.0.1. Doesn't show tiles icon in top right corner just shows a gear that is used to hide the empty tiles that I can't fill with sites. First it would only show 2 rows of 4 columns even though I had it set to 5 & 6 then few days later for no reason they went empty with a serrated line around the tiles & can't drag from the bookmarks---- really bloody annoying!!!!!!! Possibly a setting in the about:config but i can't fig it out?

Reset Firefox to its default state
If you're having major problems which you can't resolve, start fresh with only your essential information.
Troubleshooting Information
This page contains technical information that might be useful when you're trying to solve a problem. If you are looking for answers to common questions about Firefox, check out our support website.
Application Basics
Name Firefox
Version 33.0.1
Update History
User Agent Mozilla/5.0 (Windows NT 6.1; WOW64; rv:33.0) Gecko/20100101 Firefox/33.0
Profile Folder
Enabled Plugins about:plugins
Build Configuration about:buildconfig
Memory Use about:memory
Multiprocess Windows 0/1
Crash Reports for the Last 3 Days
Report ID Submitted
All Crash Reports
Extensions
Name Version Enabled ID
Adblock Plus 2.6.5 true {d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}
Adblock Plus Pop-up Addon 0.9.2 true [email protected]
Skype Click to Call 7.3.16540.9015 true {82AF8DCA-6DE9-405D-BD5E-43525BDAD38A}
Trend Micro BEP Firefox Extension 8.0.0.1173 true [email protected]
Trend Micro NSC Firefox Extension 6.8.0.1120 true {22C7F6C6-8D67-4534-92B5-529A0EC09405}
Trend Micro Toolbar 7.0.0.1243 true {22181a4d-af90-4ca3-a569-faed9118d6bc}
Graphics
Adapter Description Intel(R) HD Graphics
Adapter Drivers igdumd64 igd10umd64 igdumdx32 igd10umd32
Adapter RAM Unknown
Device ID 0x0046
Direct2D Enabled true
DirectWrite Enabled true (6.2.9200.16571)
Driver Date 1-30-2013
Driver Version 8.15.10.2993
GPU #2 Active false
GPU Accelerated Windows 1/1 Direct3D 11 (OMTC)
Vendor ID 0x8086
WebGL Renderer Google Inc. -- ANGLE (Intel(R) HD Graphics Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote true
AzureCanvasBackend direct2d
AzureContentBackend direct2d
AzureFallbackCanvasBackend cairo
AzureSkiaAccelerated 0
Important Modified Preferences
Name Value accessibility.blockautorefresh true
accessibility.typeaheadfind.flashBar 0
browser.cache.disk.capacity 358400
browser.cache.disk.smart_size_cached_value 358400
browser.cache.disk.smart_size.first_run false
browser.cache.disk.smart_size.use_old_max false
browser.cache.frecency_experiment 1
browser.places.smartBookmarksVersion 7
browser.sessionstore.upgradeBackup.latestBuildID 20141023194920
browser.startup.homepage www.google.com
browser.startup.homepage_override.buildID 20141023194920
browser.startup.homepage_override.mstone 33.0.1
browser.tabs.loadInBackground false
dom.mozApps.used true
extensions.lastAppVersion 33.0.1
font.internaluseonly.changed true
gfx.direct3d.last_used_feature_level_idx 1
keyword.URL http://www.bing.com/search?FORM=UP97DF&PC=UP97&q=
media.gmp-gmpopenh264.lastUpdate 1413750166
media.gmp-gmpopenh264.version 1.1
media.gmp-manager.lastCheck 1414375733
network.cookie.prefsMigrated true
places.database.lastMaintenance 1414404204
places.history.expiration.transient_current_max_pages 102059
plugin.disable_full_page_plugin_for_types application/pdf
plugin.importedState true
plugin.state.npmedia 0
plugin.state.nptimegrid 1
print.printer_Canon_MG2100_series_Printer.print_bgcolor false
print.printer_Canon_MG2100_series_Printer.print_bgimages false
print.printer_Canon_MG2100_series_Printer.print_colorspace
print.printer_Canon_MG2100_series_Printer.print_command
print.printer_Canon_MG2100_series_Printer.print_downloadfonts false
print.printer_Canon_MG2100_series_Printer.print_duplex 3997817
print.printer_Canon_MG2100_series_Printer.print_edge_bottom 0
print.printer_Canon_MG2100_series_Printer.print_edge_left 0
print.printer_Canon_MG2100_series_Printer.print_edge_right 0
print.printer_Canon_MG2100_series_Printer.print_edge_top 0
print.printer_Canon_MG2100_series_Printer.print_evenpages true
print.printer_Canon_MG2100_series_Printer.print_footercenter
print.printer_Canon_MG2100_series_Printer.print_footerleft &PT
print.printer_Canon_MG2100_series_Printer.print_footerright &D
print.printer_Canon_MG2100_series_Printer.print_headercenter
print.printer_Canon_MG2100_series_Printer.print_headerleft &T
print.printer_Canon_MG2100_series_Printer.print_headerright &U
print.printer_Canon_MG2100_series_Printer.print_in_color true
print.printer_Canon_MG2100_series_Printer.print_margin_bottom 0.5
print.printer_Canon_MG2100_series_Printer.print_margin_left 0.5
print.printer_Canon_MG2100_series_Printer.print_margin_right 0.5
print.printer_Canon_MG2100_series_Printer.print_margin_top 0.5
print.printer_Canon_MG2100_series_Printer.print_oddpages true
print.printer_Canon_MG2100_series_Printer.print_orientation 0
print.printer_Canon_MG2100_series_Printer.print_page_delay 50
print.printer_Canon_MG2100_series_Printer.print_paper_data 1
print.printer_Canon_MG2100_series_Printer.print_paper_height 11.00
print.printer_Canon_MG2100_series_Printer.print_paper_name
print.printer_Canon_MG2100_series_Printer.print_paper_size_type 0
print.printer_Canon_MG2100_series_Printer.print_paper_size_unit 0
print.printer_Canon_MG2100_series_Printer.print_paper_width 8.50
print.printer_Canon_MG2100_series_Printer.print_plex_name
print.printer_Canon_MG2100_series_Printer.print_resolution 7602290
print.printer_Canon_MG2100_series_Printer.print_resolution_name
print.printer_Canon_MG2100_series_Printer.print_reversed false
print.printer_Canon_MG2100_series_Printer.print_scaling 1.00
print.printer_Canon_MG2100_series_Printer.print_shrink_to_fit true
print.printer_Canon_MG2100_series_Printer.print_to_file false
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_bottom 0
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_left 0
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_right 0
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_top 0
privacy.sanitize.migrateFx3Prefs true
privacy.sanitize.timeSpan 2
storage.vacuum.last.index 1
storage.vacuum.last.places.sqlite 1412311800
Important Locked Preferences
Name Value
JavaScript
Incremental GC true
Accessibility
Activated false
Prevent Accessibility 0
Library Versions
Expected minimum version Version in use
NSPR 4.10.7 4.10.7
NSS 3.17.1 Basic ECC 3.17.1 Basic ECC
NSSSMIME 3.17.1 Basic ECC 3.17.1 Basic ECC
NSSSSL 3.17.1 Basic ECC 3.17.1 Basic ECC
NSSUTIL 3.17.1 3.17.1
Experimental Features
Name ID Description Active End Date Homepage

Videos (eg, YouTube, New York Times) do not work on my Retina Display MacBook Pro. There is sound but only empty space where the video should be. Help?

Videos (eg, YouTube, New York Times) do not work on my Retina Display MacBook Pro. There is sound but only empty space where the video should be. Help?

Did you install Flash Player?
http://get.adobe.com/flashplayer/

HT1203 i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

It is almost as if the program does not exist on my computer. If I search for it, the only thing that comes up is the installer. I cannot find it anywhere despite the fact I have installed it numerous times, uninstalled it and conducted a fresh install, and the Adobe website checks says that it is installed.

New Mac - Migration Assistantat not working...metadata?

Similar Messages

Maybe you are looking for