New Mac Mini Backup

Just bought a new mac mini i7, do i have to buy mountain lion from app store to get a back up image in case i want to reinstall. or is there a way to reset to factory settings.

Welcome to the Apple Support Communities
Go to  > About this Mac and see Version. If it's 10.8.x, you have Mountain Lion, so you can reinstall OS X for free with Internet Recovery. However, you can't download Mac OS X from the App Store because your Mac needs a special OS X version that it's not available in the App Store

Similar Messages

  • How do I create a backup  DVD  OS disk for my  new mac mini ?

    how do I create a backup  DVD  OS disk for my  new mac mini ?
      in case of failure HD etc
    no disks came with it

    No disk-version of Lion, but a Lion Thumb Drive http://store.apple.com/us/product/MD256
    For the downloaded OSX Lion form the Mac App Store you can use this http://www.macupdate.com/app/mac/39701/lion-diskmaker to make yourself a disk.
    And have a read here http://www.afp548.com/article.php?story=getting-lion-installers on how-to get/make a machine-specific OSX Lion installer disk.
    Stefan

  • I cannot install Lion to a backup drive for my new Mac Mini

    I just bought the new Mac Mini with an i7 processor last week. I wanted to format a backup drive for it. When I tried to use the Lion Recovery partition on the new Mac Mini, I keep getting an error message that says it's incompatoble with the current model.
    I also tried to use the Lion thumbdrive I purchased from Apple to see if that can be used, but it also give me the incompatible message.
    Is there a special version of Lion that's only for the new Mac Mini's?
    Any help is appreciated!

    Read this, it will explain it: http://support.apple.com/kb/HT4905
    Mac mini (Mid 2011), MacBook Air (Mid 2011): Use Lion Recovery instead of OS X Lion USB Thumb Drive
    Last Modified: September 01, 2011
    Article: HT4905
    Summary
    Learn about using Lion Recovery or the built-in OS X Lion recovery partition rather than OS X Lion USB Thumb Drive with computers released after OS X Lion.
    Products Affected
    MacBook Air (13-inch, Mid 2011), MacBook Air (11-inch, Mid 2011), MacBook Air (Mid 2011), Mac mini (Mid 2011)
    Use Lion Recovery to restore Mac computers released after OS X Lion. If you attempt to use the OS X Lion USB Thumb Drive, a message will appear stating that you cannot install this version of OS X on your computer. This is correct behavior to make sure you install only the correct and most up-to-date version of Mac OS X on your computer.
    Note: You can also use the Lion Recovery Disk Assistant on your Mac to create a bootable image to make sure you recover the correct version of OS X Lion. To use the Lion Recovery Disk Assistant, you need to have your own USB drive.
    Additional Information
    If you have a network connection, you should receive the appropriate version of Mac OS X when using the built-in Recovery HD partition on Macs running Lion.
    Learn more about Lion Recovery.

  • Whats the best way to transfer everything from my old macbook pro to a new mac mini, i have a external hard drive which i backup to regularly via time capsule

    whats the best way to transfer everything from my old macbook pro to a new mac mini, i have a external hard drive which i backup to regularly via time capsule

    Check out > OS X Lion: How to use Migration Assistant to transfer files from another Mac

  • Problem migrating to new Mac mini Server from Time Machine Backup

    I sell my old Mac mini Server and after I purchase the new one (unibody). I had the Time Machine Backup but I'm not able to restore it to the new mac mini. I started it with the Server Install DVD into it and I went to Utility menu to choose "*Restore from Time Machine backup*" but it said that *it was not possible to restore the backup to this machine because its a different hardware, and suggested to use Migration*. So I restarted it and when it asked me to choose between "setting up a new server" or "transfer information from an existing server" I chose this last. In the next menu didn't appear any Time Machine backups so I mounted the time machine backup and copied the Latest hd backup to an external firewire hd and I connected it to the new one. In the migration menu list appeared my backup but there was a *yellow triangle icon* over it and the message "*Migration is not supported from servers which are configured to use dynamic network addresses. Configure the source system to have a manual network address and try again*". But how can I config a static address into my backup if I can't restore it into a machine? I don't have anymore the old mac mini to restore the backup and make any change in the configuration!
    Any one can please help or give me suggestions?
    Many thanks

    I solved it!
    I changed the network settings by editing /Library/Preferences/SystemConfiguration/preferences.plist
    So I successfully restored my SL server installation, but now I have an issue with Ethernet and SD reader. See this post if you are interested:
    http://discussions.apple.com/thread.jspa?messageID=11709463#11709463

  • Unable to backup to external hard drive with new Mac Mini

    I have been using a 1TB iOmega MiniMax external hard drive to backup my Mac Mini that was running on OS X 10.6.8.  I recently replaced the Mac Mini with a newer model running on OS X 10.9.5.  I successfully recovered all my files from the backup hard drive onto the new Mac Mini.  However, since then I am not able to   do either an automatic Time Machine backup or a manual backup.  I'm wondering if I need to update the iOmega MiniMax driver to be compatible with the newer OS X.  So far I have not been able to locate any updated drivers.  The new Mac Mini is able to recognize the old data that were previously backed up, but will not complete a new backup.  Any suggestions are appreciated.

    Thanks for the help.  When I got the new Mac Mini, I was able to restore all my files from the iOmega HD backup.  But since then each time I try a TM backup I see the in work wheel spinning (in Finder) but no backup is made.  No error messages are given.  I will try the trouble shooting list you sent.  Thanks again.

  • Time machine client backup restore to a new mac mini server?

    I just bought a new Mac Mini server and its up and running. My question is can I restore the Time Machine backup from my MacBook Pro to the server drive? When I select restore it wants to erase the server drive, is that a good idea?

    This is a bit of a guess... But I Imagine you would have to start with the workstation OS install DVD first, and go from there at the appropriate point. Any chance you have or could make a CCC backup instead? I am assuming you could boot a mini server from a backup of mini non-server. Then you could copy it over. This is probably worth a phone call to Apple TAC

  • External backup drive will not mount on new mac mini. still works fine on the old one. new one is running mavericks

    I just bought new-to-me mac mini running OSX mavericks.
    Trying to migrate from old mac mini using simpletech external hard drive.
    It still mounts on my old mac mini (system 10.5) but will not mount or show up when I plug it in to the new mac mini running mavericks.
    Any ideas?

    BDAqua wrote:
    What exactly shows in System Profiler>Hardware>USB for those drives?
    Boot from the Install Disc & see if they show up, not grayed out in Disk Utility.
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    We were thinking along the same lines. While at home I dug up a firewire enclosure and put a bootable GUID formatted drive in it (that I had in one of the usb enclosures) and started her computer holding down the option key and then chose to boot from the external firewire. All usb drives are now mounting upon connection. I asume that her drive has bad sectors on it (even though the SMART status says it's OK) and is not loading all the drivers properly for USB to mount. I was suspicious from the beginning that the OS was corrupt when she first had me look at it. It was at that point that I booted it in target mode, connected to my Macbook Pro, and then CCC'd to a usb drive that I had. I then had a couple of difficulties installing the new OS. Should have known......
    I am now going to put a new drive in it for her and she'll be up and running.
    Thanks so much for your help and thoughts that got me thinking as well.
    pax

  • How can i sync my iTunes library from my iPhone with my new mac mini

    Recently my hard drive failed on my mac mini.  I had burned a bunch of CDs on the old mac mini and then sync'd it with my iphone.  Now the CDs are on my iphone but not on the new mac mini.  How can I sync my itunes library from my iphone to my new mac mini?

    The iphone is not a backup device.
    You need to copy everything from the backup copy of your computer computer to your new one.

  • I'm attempting to transfer files, address book, etc from an external hard drive to my new Mac-mini using migration assistant.  The external drive is showing up on my desktop but Migration Assistant is not seeing the drive when searching for devices

    I'm attempting to migrate files, address book, maile, etc to my new Mac Mini using an external hard drive and Migration assistant.  I followed the instructions on using Migration Assistant to do this but Migration Assistant is not seeing the external drive, which is displayed on my desktop

    I've been chasing this problem all afternoon. I had to reformat my internal drive on my MBP and reinstall Mountain Lion   Start up assistant wouldn't see my extrnal drive with the Time Machine files on it.  After many tries, I skipped the restore there and let the system boot.  I could see my external drive from Finder and the files looked OK.  I was told to use Migration Assistant and it had the same problem.
    I saw a hint on one of these posts that the icon that you see and is label Macintosh HD is actually your backup disk and it is telling you that it has a copy of your internal Macintosh HD.  I went ahead and told it to continue and it started to restore my apps, settings, and documents.  It's been going for a couple of hours, and is close to being done.  I expect to see my old system restored when it is finished.
    Wish that Apple would put some type of note that it is seeing the backup. That is most confusing and seems to be a problem for lots of users.
    It's been a month or so since your post  Did your get it to work?

  • I was able to copy all my files from my Time Capsule, but that is all they are...files. How do I get my new Mac Mini to emulate my other Mac?

    I was able to copy all my files from my Time Capsule, but that is all they are...files. How do I get my new Mac Mini to emulate my other Mac?

    Doggiemommie,
    Copying files is not a good idea.
    The "other Mac" was backed up onto Time Capsule using the Time Machine. On your new Mac you should restore the old user - rather than copy files manually.
    This usually happens during the initial setup of the new computer or you can do it later using Migration Assistant.
    Please note, it is possible to damage backup file on the Time Capsule when you browse it and copy files manually.
    Hope this explains.
    TZ

  • How do I move all files from an old PPC to a new Mac Mini?

    How do I move all files from an old PPC to a new Mac Mini?

    The new mini has a Firewire 800 port. Likely the PPC version only has Firewire 400.  The OP will need a converter cable which is why I was asking first about what hardware is available and how much is being copied.
    Probably go with using the external hard drive if you decide all you want are data files.
    If you want to migrate:
    Kappy: A Basic Guide for Migrating to Intel-Macs - http://discussions.apple.com/message/10257343
    Mac OS X 10.3, 10.4: Transferring data with Setup Assistant / Migration Assistant FAQ - http://support.apple.com/kb/HT1554
    Setting-up a new Mac from an old one or its Backups - http://web.me.com/pondini/AppleTips/Setup.html

  • Help! Can't install SSD in my new Mac Mini Server (2012)

    Previously I've purcahsed Mac Mini servers and removed one of the two drives, replacing it with an OWC SSD. The hardware change was not hard to do and resulted in incredibly good computers for my employees to use which allowed us to retire several old, slow and abandoned-by-Apple Mac Pros. There were no issues with reformatting the computers after they had SSDs put in.
    Today I took delivery of a new Mac Mini server, and started to do the same thing, removing the top HDD and sliding in my SSD, since I have many of them around. Unfortunately, the OS would NOT let me format the disks separately or remove the RAID. The volumes (the original 1 TB that was inside and my 480GB SSD) were both colored red when I booted into Internet Restore mode and ran Disk Util, something I've never seen before, and all it would do was say "there was a problem with your disk, would you like to revert it to a working state?" which in this case means Disk Util forcing my drives back into a RAID whether I want them that way or not. (At one point it fused my SSD and the 1TB drive into a single logical drive that had the correct size but didn't show separate sections, and couldn't be de-RAIDED at all, even when I connected to another computer with the Mac Mini in Firewire target mode.)
    I gave up and put a 240 SSD in the lower bay, resulting in a 760GB RAID of two mismatched SSD sizes, which isn't what I wanted but I guess it will do. So far it seems to be working.
    My question is, why in the heck is Apple forcing me to run my computers as a RAID and/or not letting me break the system into one hard drive and one RAID, which is what I want? (Having the backup disk right inside the computer is very handy.)  Is this some feature to keep us from "making our own" Fusion drives? If Apple is deciding we can't hack or do anything interesting with Mac Minis, this will the last one I purchase, and I'm sure there will be others who do the same.
    Since replacing one HDD with an SDD is likely to be the most popular mode imaginable for Mac Minis, can anyone tell me if they got a similar setup to work, and if so what did you do? Can you post the steps here for others who will be in this situation?

    I'm not sure how or what is different between the Standard 2012 Mac Mini and the 2012 Server...? However it looks like your Server also uses Fusion like or similar to the regular Mac Mini's.
    "The version of Disk Utility that comes with Fusion Drive is unique. Earlier versions of Disk Utility can't be used with a Fusion Drive."
    Have a look at > Mac mini (Late 2012) and iMac (Late 2012): About Fusion Drive
    and > Special Note for Adding an SSD to a 2012 Mac mini. | Other World Computing Blog

  • Imac has crashed..need new hard drive....had external drive connected...was using time machine.....so...itunes file should be on external drive....how do i import them to my new mac mini?

    my iMac has crashed...was told I need a new hard drive.....meantime I bought a mac mini.....I had an external drive connected to the mac....and was using time machine for backups....so....how do i move itunes music files to my new mac mini from the external drive?

    Turn Time Machine OFF temporarily in its preference pane. Leave the window open.
    Navigate in the Finder to your backup disk, and then to the folder named "Backups.backupdb" at the top level of the volume. If you back up over a network, you'll first have to mount the disk image file containing your backups by double-clicking it. Descend into the folder until you see the snapshots, which are represented by folders with a name that begins with the date of the snapshot. Find the one you want to restore from. There's a link named "Latest" representing the most recent snapshot. Use that one, if possible. Otherwise, you'll have to remember the date of the snapshot you choose.
    Inside the snapshot folder is a folder hierarchy like the one on the source volume. Find one of the items you can't restore and select it. Open the Info dialog for the selected item. In the Sharing & Permissions section, you may see an entry in the access list that shows "Fetching…" in the Name column. If so, click the lock icon in the lower right corner of the dialog and authenticate. Then delete the "Fetching…" item from the access list. Give yourself read access if you don't already have it. Click the gear icon below the list and select Apply to enclosed items from the popup menu.
    Now you should be able either to copy the item in the Finder or to restore it in the time-travel view. If you use the time-travel view, be sure to select the snapshot you just modified. If successful, repeat the operation with the other items you were unable to restore. You can select multiple items in the Finder and open a single Info dialog for all of them by pressing the key combination option-command-I.
    When you're done, turn TM back ON and close its preference pane.

  • I have been sync'ing my iPad  2 with Windows XP. Now I have a new mac mini and want to switch to this new computer.  How do I save the info on my pad?

    I have been syncing my I Pad 2 with a pc running windows xp.  Now I have a new mac mini and want to switch the syncing to the mac.  What do I do to protect the information and purchased apps on my I pad? 

    Backup and Restore
    http://support.apple.com/kb/ht1766

Maybe you are looking for