New Mac Mini not seeing my Apple TV

I just got a new Mini and used the migration assistant to migrate my accounts and files from my old Mac to the new one.
However, when I launch iTunes, my AppleTV is not showing in the left-bar or the Preferences. It used to show and sync just fine with my old Mac (G4 MDD Dual 1.25GHz).
I have the latest update running on the AppleTV (3.0.1) and am running the latest Mac OS (10.6.2) and iTunes (9.0.2). My library is still named the same, since I migrated my old account settings.
Is there anything I need to reset/change for iTunes to see the AppleTV?
P.S. I have "Look for Apple TVs" checked in the iTunes Preferences.
Thanks

Go to your TV menu and reset the synch for the new computer. I had the same problem when I got a new Mini. Not sure if it is due to the new computer or Snow Leopard. Even though the library & network names are the same, seems the TV knows the computer itself is different. Kill the current synch & set up a new one just like you did when the TV was new. You can use the same names. You will get a new pass-code to enter on iTunes when you do. The big negative is everything on the TV is dumped and has to be re-synched. If your library is very large, do it overnight.

Similar Messages

ITunes on new Mac mini not recognizing my 1st gen iPod

I just got a new Mac mini. It has iTunes v6.0.4. My 1st generation iPod is v1.5. When I buy a song and attempt to transfer it from the 'Purchased' folder to my iPod, I'm getting an error message that says, 'Some of the songs in the iTunes music Library were not copied to the iPod because you are not authorized to play them on this computer.' Do I need to plug my iPod into the computer I was using before and click on 'Deauthorize Computer' before I try to use this one?
Mac mini Mac OS X (10.0.x)

You need to authorize your new computer.
See this.
http://docs.info.apple.com/article.html?artnum=93014

Which adapter do I need to connect my new Mac Mini to my old Apple Cinema HD monitor?

I have a perfectly good Apple Cinema HD monitor (model M8536), but it has an ADC connection, and my new Mac Mini isn't compatible with it. I've bought a new screen for the Mac Mini, but there are going to be times when I need to run two screens in parallel on the Mini. Can anyone tell me which adapter I need to do this? I've looked at the Apple DVI to ADC connector (M8661LL), but I'm not sure this is what I need, and they're quite pricey, even second-hand on eBay, so I don't want to make a mistake!
Thanks!

Thanks, dwb ... unfortunately I don't think I'd get very much for my old display, it's so old (> 10 years)! But it still works perfectly, and I'm loathe to throw it away ... and there are going to be times when I need the two screens, so even though I've bought a new 27" Philips monitor, it would be good just to buy an adapter to hook up the old screen ...

Itunes / mac mini not seeing ipod

When I plug my ipod into the mac mini (usb) my mac doesn't recognize or see it. That means I can't update any songs on my ipod from my itunes library. I've tried:
- resetting the ipod,
- uninstalling and reinstalling itunes,
- plugging the ipod directing into the usb port on the mini base and the monitor usb port,
- putting the ipod in disk mode and
Still my mac does not see the ipod.
Upgraded to iTunes 7.2 a few weeks ago. It's been working fine the last couple of weeks.
Please - help!!!

All I can think of:
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

New Mac Mini, Not so new LCD HDTV Monitor, no mac support

I have been attempting to set up a Mac Mini with a Maxent LCD 26" HD TV I can't get either the RGB or DVI-D input to accept signal. I have purchased DisplayConfigX and SwitchResX_X. Maybe they could work, but I can't get a signal to stay on long enough to change the settings as listed in other posts. I have tried booting in safe mode as DisplayConfigX instructions suggest. But still only am able to see the screen until gear starts spinning with apple logo, resolution changes spontaneously to one that I suppose is unsupported and I get the unsupported display and a beautiful blank blue screen. I tried manually inputting the resolutions the monitor manual lists, while connected with an lcd pc monitor. But I can't get the Maxent LCD TV monitor to stay on. It appears that if I could get the Mac Mini to send this resolution signal to the Maxent I would be able to delete any unneeded settings and that would be it.
Perhaps Tom Fussy can help me.I have been at this for over two weeks now. So I have become super frustrated. Of course Maxentusa.com offers no Mac support. But state that if Mac mini is supposed to work with PC that it should work with my Mac Mini. My LCD TV is about 6 months old I could still return it for maybe a Sharp Aquos, if that $300 dollar more TV would work. I am happy with the Maxent otherwise. Keeping it, and having it work with Mac Mini Is my choice. Of course Apple offers no support for the Maxent monitor and directed me here. This is my first discussion group post. School me if I have not followed the rules completely.

I was able to get the settings for Maxent using Gregory's software to force 640x480. Here are my settings
DDC block generated by SwitchRes X for display
MX-26X3
0 1 2 3 4 5 6 7 8 9 A B C D E F
0 | 00 FF FF FF FF FF FF 00 34 38 35 08 06 44 00 00
1 | 0C 0F 01 03 0F 3A 20 78 88 00 0D 00 00 00 00 00
2 | 00 47 4A BD CE 00 31 59 45 59 61 59 81 80 81 C0
3 | D1 C0 01 01 01 01 FF 1D 56 EA 50 00 20 30 46 28
4 | 55 00 40 44 21 00 00 18 8C 0A D0 8A 20 E0 2D 10
5 | 10 3E 96 00 40 44 21 00 00 18 00 00 00 FD 00 3C
6 | 55 1F 45 0B 00 0A 20 20 20 20 20 20 00 00 00 FC
7 | 00 4D 58 2D 32 36 58 33 0A 20 20 20 20 20 00 2D
Valid DDC block: checksum passed
EDID Version........1.3
Manufacturer........MAX
Product Code........13576 (3508) (0835)
Serial Number.......17414
Manufactured........Week 12 of year 2005
Max H Size..........58 cm
Max V Size..........32 cm
Gamma...............2.20
DPMS Supported Features:
Standby
Display type:
RGB color display
Input signal & sync:
Analog input with: 0.700V / 0.300V
Serration Vsync
Sync on green
Separate Sync
Composite Sync
Color info:
Red x = 0.000 Green x = 0.000 Blue x = 0.000 White x = 0.280
Red y = 0.000 Green y = 0.000 Blue y = 0.000 White y = 0.290
Established Timings:
800 x 600 @ 60Hz
640 x 480 @ 75Hz
640 x 480 @ 72Hz
640 x 480 @ 67Hz
640 x 480 @ 60Hz
720 x 400 @ 70Hz
1024 x 768 @ 75Hz
1024 x 768 @ 70Hz
1024 x 768 @ 60Hz
800 x 600 @ 75Hz
800 x 600 @ 72Hz
Manufacturer Reserved Timings:
Standard Timing Identification:
#0: 640 x 480 @ 85Hz (3159)
#1: 800 x 600 @ 85Hz (4559)
#2: 1024 x 768 @ 85Hz (6159)
#3: -768 x -614 @ 60Hz (FFFF8180)
#4: -768 x -432 @ 60Hz (FFFF81C0)
#5: -128 x -72 @ 60Hz (FFFFD1C0)
Monitor Description blocks:
Descriptor #0 is Timing definition:
Mode = 1366 x 768 @ 60Hz
H. Active...............1366 pixels
H. Blanking.............234 pixels
V. Active...............768 lines
V. Blanking.............32 lines
HSync Offset............70 pixels
HSync Pulse Width.......40 pixels
VSync Offset............5 lines
VSync Pulse Width.......5 lines
Pixel Clock.............76.79MHz
Horizontal freq.........47.99kHz
Vertical freq...........59.99Hz
H Image Size............576mm
V Image Size............324mm
H Border................0 pixels
V Border................0 lines
Non-Interlaced
Sync: Digital separate with
* Negative vertical polarity
* Negative horizontal polarity
Descriptor #1 is Timing definition:
Mode = 720 x 480 @ 60Hz
H. Active...............720 pixels
H. Blanking.............138 pixels
V. Active...............480 lines
V. Blanking.............45 lines
HSync Offset............16 pixels
HSync Pulse Width.......62 pixels
VSync Offset............9 lines
VSync Pulse Width.......6 lines
Pixel Clock.............27.00MHz
Horizontal freq.........31.47kHz
Vertical freq...........59.94Hz
H Image Size............576mm
V Image Size............324mm
H Border................0 pixels
V Border................0 lines
Non-Interlaced
Sync: Digital separate with
* Negative vertical polarity
* Negative horizontal polarity
Descriptor #2 is Monitor limits:
Horizontal frequency range.......31-69 kHz
Vertical frequency range.........60-85 Hz
Maximum bandwidth unspecified
Descriptor #3 is Monitor name:
MX-26X3
Mac Mini 1.42 g, superdrive, ATI 9200 Mac OS X (10.4.2)

Mac mini not seeing keyboard

I came home yesterday and my Mac Mini 2012 would not wake up. I did a forced shut down then powered it back up. I got the grey screen with login, but could not enter anything from my Logitech K760 bluetooth keyboard. No messages, just no response. The apple Magic Mouse was working so I shut it down and tried again. Still no keyboard.
Additional Mac Mini info: Intel i7, Samsung 840 SSD, 16GB Kingston RAM. Everything has been in place for over a year with no issues. I have time machine on external FreeAgent GoFlex USB 3.0. It has been 2-4 weeks since any third party software has been added. I do not recall there even being any updates for anything this last week.
Here is a couple observations:
1a. Mac Mini OFF, keyboard ON
1b. Turn Mac Mini ON, Mac Mini acts as if there is no keyboard, but no messages, no errors.
2a. Mac Mini OFF, Keyboard OFF
2b. Mac Mini ON, Keyboard still OFF; Bluetooth Setup Assistant window opens, "There isn't a keyboard connected" says....Looking....
2c. Turn Keyboard on; push button, Make Discoverable; Computer - Keyboard found - ID's Logitech K760; Setup Assistant window closes.
2d. Still no keyboard input; push any key and Keyboard goes into pairing mode.
Notes: Keyboard will pair and work with other devices. I used it to type this up on my ipad. The bluetooth mouse works. Attached a USB keyboard to my Mac Mini with result of no keyboard input.

All I can think of:
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

HP P1102w and new Mac Mini not talking...

Hi All,
This is a similar issue to all the other threads involving the P1102w and Lion. It is a little different in that the printer is already on the network and running successfully with 2 other minis, 2 iphone 4s, and 2 ipad2s... it just wont work with the new mini.
I have read over many threads and seen lots of different answers and solutions but I didnt want to just jump in and start messing things up when there is (maybe) a simpler fix.
I know that the printer firmware is up to date, at least to a month ago when I installed it the first time. I do have a windows laptop if the solution is to do the HTML config I saw in another thread.
So, if anyone can point to the solution to this isue I would be forever greatful.
Thank you for your time in this matter.
Cheers,
Alex

See if it's related to this...
The 2012 macs (and later apparently) not waking normally from sleep after hours being in sleep. (noted here ...
http://www.xlr8yourmac.com/archives/feb13/022813.html#2012macswontwake
"Why 2012 iMac/2012 Mac Mini won't Wake After Hours of Sleep (Hibernates/Powers Off)")
The sleepimage file still reappears even if never slept. Delete it (hibernate off, etc) - within minutes its back.
A note on that here - http://www.xlr8yourmac.com/feedback/Chameleon_SSD_Optimizer.html
About iMac sleep...
http://forums.macrumors.com/showthread.php?t=1529750
Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"

Home Sharing from Mac mini not working to Apple TV anymore

Hi there,
My Mac mini (2010 version) is being used as a home theatre. I have been able to connect to my Mac mini through the "Shared" tab in the Finder on my iMac and MacBook Pro along with my Apple TV through Home Sharing on iTunes, up until yesterday.
When I try accessing my Mac mini shared folder in Finder, it just says "Connecting" for a very long time, before it tells me "Connection Failed."
On my Apple TV, which is a big problem because my entire iTunes library feeds my Apple TV, it just doesn't show up anymore at all.
Are there any solutions to any of these problems?
Thank you so much,
Marcus Cyganiak

have you tried rebooting your mini ?
you also might want to try booting into _*safe mode*_, repairing permissions using *disk utility* while in it, then rebooting normally.
JGG

My new mac mini not recognizing usb dac

mac mini stopped recognizing external usb dac. i've reloaded osx 10.7.3 and run 10.7.3 combo. nothing, it appears audio mini setup is not working. the dac lists in devices in finder, but nothing in audio devices. have downloaded driver numerous times....nothnig.
can anyone help?
thanks

sorry...been away for a hile. it appearsbthatbit fixedbitself......until the power went out earlier today and its now doing the same thing. itnwill not connect to the dc. it is a eastern electric dac plus.

Decided to upgrade from an old PowerBook G4, mostly for eyesight issues. Bought a new Mac Mini and hooked it up to an Apple A1267 Cinema Monitor. I cannot even figure out how to turn them on. Help please.

I am exhausted just getting to the point of being allowed to ask my question. I recently decided to upgrade from an old PowerBook G4 that we have used for years, and am using now. I bought a new Mac Mini and a reconditioned Apple A1267 Monitor that was working beautifully when hooked to a slightly newer PowerBook in the store. Both the Mini and the monitor are plugged in, and attached to each other but I feel light a dolt. I cannot even figure out how to turn them on or even get a power light to come on. Can someone help me?

How is the Mini coonected to the momitor?
Does the power button n the mini not work?

How to connect my studio display with a Apple display connector to my new mac mini

How can I connect my studio display with a Apple display connector to my new mac mini?

https://discussions.apple.com/message/8315498#8315498

How do I plug a VGA monitor into a new mac mini?

How do I plug a VGA monitor into a new mac mini?
Why do Apple change everything all the time?

You need an adaptor, HDMI to DVI is included in the package, take HDMI to VGA or thunderbolt which, in case of monitor, is the same as minidisplay port to VGA. Apple has always upgraded the best output port, unfotunately monitor manufacturers have not done the same.

Connected to new Mac mini display doesn't work

Connected a new Mac mini to a 20in apple Cinema Display and display does not work

How are the two TVs connected to the Minis?
Tell us more about the "problem" TV.
Are the Minis in the same location with both TVs? I ask because maybe interference is causing the problem. If the Minis are in same location it cold be cause by interference generated by the TV

Can the new Mac Mini run OSX 10.7.5?

I have the new 1.4GHz Mac Mini w/4GB Ram. I bought a Mediasonic external 4 bay drive. It's connected by USB 3.0. One of the drives in the enclosure is my old HD with Mac OSX 10.7.5 installed. I've tried booting up from that drive through the USB 3 connection with no luck. Is it an external drive issue or does the new Mac Mini not support that old of an OS? Any thoughts are appreciated. Thanks!

Not outside of a product such as VirtualBox, Parallels Desktop, or VMware Fusion; Mac OS X 10.7.5 doesn't contain the drivers needed to boot that Mac model.
(115966)

I'm attempting to transfer files, address book, etc from an external hard drive to my new Mac-mini using migration assistant. The external drive is showing up on my desktop but Migration Assistant is not seeing the drive when searching for devices

I'm attempting to migrate files, address book, maile, etc to my new Mac Mini using an external hard drive and Migration assistant. I followed the instructions on using Migration Assistant to do this but Migration Assistant is not seeing the external drive, which is displayed on my desktop

I've been chasing this problem all afternoon. I had to reformat my internal drive on my MBP and reinstall Mountain Lion Start up assistant wouldn't see my extrnal drive with the Time Machine files on it. After many tries, I skipped the restore there and let the system boot. I could see my external drive from Finder and the files looked OK. I was told to use Migration Assistant and it had the same problem.
I saw a hint on one of these posts that the icon that you see and is label Macintosh HD is actually your backup disk and it is telling you that it has a copy of your internal Macintosh HD. I went ahead and told it to continue and it started to restore my apps, settings, and documents. It's been going for a couple of hours, and is close to being done. I expect to see my old system restored when it is finished.
Wish that Apple would put some type of note that it is seeing the backup. That is most confusing and seems to be a problem for lots of users.
It's been a month or so since your post Did your get it to work?

New Mac Mini not seeing my Apple TV

Similar Messages

Maybe you are looking for