New mac mini, now I get generic tiffs in bridge, no raw in PS cc

Hi,
I just replaced my 2006 pro mac with a 2012 mini. I am getting generic tiff icons in bridge, these are created in lightroom. I received some tifs from a friend and the correct icons show. Also my icons show properly in the finder.
#2 Photoshop can't open Sony arw raw files but lightroom can??
Use CC and mavericks.
thanks
Steve

Hi,
I just replaced my 2006 pro mac with a 2012 mini. I am getting generic tiff icons in bridge, these are created in lightroom. I received some tifs from a friend and the correct icons show. Also my icons show properly in the finder.
#2 Photoshop can't open Sony arw raw files but lightroom can??
Use CC and mavericks.
thanks
Steve

Similar Messages

  • I cannot install Lion to a backup drive for my new Mac Mini

    I just bought the new Mac Mini with an i7 processor last week. I wanted to format a backup drive for it. When I tried to use the Lion Recovery partition on the new Mac Mini, I keep getting an error message that says it's incompatoble with the current model.
    I also tried to use the Lion thumbdrive I purchased from Apple to see if that can be used, but it also give me the incompatible message.
    Is there a special version of Lion that's only for the new Mac Mini's?
    Any help is appreciated!

    Read this, it will explain it: http://support.apple.com/kb/HT4905
    Mac mini (Mid 2011), MacBook Air (Mid 2011): Use Lion Recovery instead of OS X Lion USB Thumb Drive
    Last Modified: September 01, 2011
    Article: HT4905
    Summary
    Learn about using Lion Recovery or the built-in OS X Lion recovery partition rather than OS X Lion USB Thumb Drive with computers released after OS X Lion.
    Products Affected
    MacBook Air (13-inch, Mid 2011), MacBook Air (11-inch, Mid 2011), MacBook Air (Mid 2011), Mac mini (Mid 2011)
    Use Lion Recovery to restore Mac computers released after OS X Lion. If you attempt to use the OS X Lion USB Thumb Drive, a message will appear stating that you cannot install this version of OS X on your computer. This is correct behavior to make sure you install only the correct and most up-to-date version of Mac OS X on your computer.
    Note: You can also use the Lion Recovery Disk Assistant on your Mac to create a bootable image to make sure you recover the correct version of OS X Lion. To use the Lion Recovery Disk Assistant, you need to have your own USB drive.
    Additional Information
    If you have a network connection, you should receive the appropriate version of Mac OS X when using the built-in Recovery HD partition on Macs running Lion.
    Learn more about Lion Recovery.

  • I recently purchased new Mac Mini with Lion installed. Now I can't get iTunes to sync iCal from my iPod Touch (3rd gen) to my Mini.

    I recently purchased a new Mac Mini with Lion installed. I downloaded the latest version of iTunes. Now I can't get iTunes to sync iCal from my iPod Touch (3rd gen) to my Mini. Everything else syncs great, and iCal syncs from my Mini to my Touch. My Touch has the latest iOS installed. I have tried rebooting my Touch, removing the sync calendars option from iTunes>Info and checking it again after applying and closing iTunes, and restarting my Mini. Any help will be appreciated!

    Ongoing thread with the same question https://discussions.apple.com/thread/3209335?tstart=0
    Stefan

  • I cannot get the new mac mini to wake from sleep and trigger the displays - this is the second mac mini I have had and both have had the same issues. It worked before on my macbook extremely well...

    I cannot get the new mac mini to wake from sleep and trigger the displays - this is the second mac mini I have had and both have had the same issues. It worked before on my macbook extremely well...
    Using 2 displays, connected via HDMI and thunderbolt
    Been on to support a number of times now - is anyone experiencing the same issues?

    BUMP.
    I actually showed this to Apple geniuses when I took my computer to the apple store, and it's still here. In console it says:
    kernel[0]: Previous Shutdown Cause: -128
    I don't know if that's related or not, but maybe helps?

  • I just got a new Mac Mini, and now when I try to import photos into Lightroom, iPhoto try to load them first, then Lightroom can't find the files.  Big problem.  What to do?

    I just got a new Mac Mini, and now when I try to import photos into Lightroom, iPhoto ties to load them first, then Lightroom can't find the files.  Big problem.  What to do?

    Simple:
    File -> Export to get your photos out of the iPhoto Library. In the Export dialogue you can set the kind to Original and you'll get back exactly what you put in.
    Apps like iPhoto2Disk or PhotoShare will help you export to a Folder tree matching your Events.
    Once exported, you can then trash the iPhoto Library - just drag it from the Pictures Folder to the trash and empty it.
    After that, if you're entirely neurotic about it, just put the iPhoto app in the trash and empty it.
    Regards
    TD

  • Created 3 partitions on new Mac Mini, deleted one, and now Bootcamp wont boot anymore! Need help please!

    Here's my dilemma.  I have a new Mac Mini - a week old.  I installed Windows 7 on it using Mac's Bootcamp assistant.  I then set up and configured my Windows 7 world and everything worked fine.  No issues logging in between Lion or Win7 via the restart/option key procedure.  Well, yesterday I split my Mac HD partition one more time to create a third partition (was created as an "extra", e.g. possible future partition for another operating system).  After creating it, I then decided that I didn't really need it.  So I deleted it in Disk Utility and attempted to drag the Mac HD partition line downward so as to "fill in the gap" and reclaim the lost hardrive space.  It seemed as if I could reclaim about 1 gig or so, but I figured...oh well. 
    Well, the Mac HD partition seems to work just fine, but now I've noticed that I can't get into the Bootcamp partition anymore.  It wont boot.  If I try to verify the partition [doesn't even give me "repair" as an option), then it fails and gives me the following error message: "verify volume failed.  invalid request."  When I go to the Startup Disk option in my System Preferences section, it displays the bootcamp partition as a folder and not as a drive anymore.
    I'm assuming that I messed up some permissions or lost some vital links during my attempted resizing/reclaiming of harddrive space.  How do I fix this without having to reload either all of my Mac info or all or my Win7 info?  I'd hate to consider the last two days of my life loading this crap up a complete loss. 
    Thanks in advance!

    Hi surroundsound,
    you can't put more partitions on internal HD once you install winOS with Boot Camp.
    The sure fix is to delete the windows partition (with Boot Camp Assistant, not Disk Utility), then getting rid of the extra partition (with Disk Utility).
    then you can re-install your win& (recreate the win. partition with Boot Camp) - don't add any partitions after.

  • Cannot get new Mac Mini to detect TV

    I've just got a new Mac Mini which I wanted to connect to my TV via HDMI. I used to use my Macbook to connect to it using mini DVI to HDMI and it worked fine but the Mac Mini doesn't detect it at all. I've tried changing the resolution and various other things but no luck. Any ideas how to get it working?

    Install the recent EFI firmware update for your mini that was just released. It should be available through software update. Do one power cycle of your mini after this firmware update.
    Power your mini off. Power on the TV and switch to the specific HDMI port connected to your mini. Now, power on the mini. See if this TV first scenario and the firmware update resolve your TV detection and HDMI picture.

  • I have a new MAC MINI and I want to install a second monitor.  I have one connected to the HDMI and it works.  I can't get a signal to the other one.  It is connected from the thunderbolt to its HDMI port.  How can I make it work?

    I have a new MAC MINI and I want to install a second monitor.  I have one connected to the HDMI and it works.  I can't get a signal to the other one.  It is connected from the thunderbolt to its HDMI port.  How can I make it work?

    Could be a bad cable or bad Thunderbolt port.
    You have 90 days of free telephone support on a new device. You can call them at 1-800-MY-APPLE. Have your Mini's serial number handy
    You can also make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • I was able to copy all my files from my Time Capsule, but that is all they are...files. How do I get my new Mac Mini to emulate my other Mac?

    I was able to copy all my files from my Time Capsule, but that is all they are...files. How do I get my new Mac Mini to emulate my other Mac?

    Doggiemommie,
    Copying files is not a good idea.
    The "other Mac" was backed up onto Time Capsule using the Time Machine. On your new Mac you should restore the old user - rather than copy files manually.
    This usually happens during the initial setup of the new computer or you can do it later using Migration Assistant.
    Please note, it is possible to damage backup file on the Time Capsule when you browse it and copy files manually.
    Hope this explains.
    TZ

  • I'm new to Mac. I have an iPhone and a Mac Mini.  My original iTunes was on a Windows computer that crashed.  So, all of my iTunes Music and Movies are gone.  How do I get the movies and music from my iPhone to the new Mac Mini?

    I'm new to Mac. I have an iPhone and a Mac Mini.  My original iTunes was on a Windows computer that crashed.  So, all of my iTunes Music and Movies are gone.  How do I get the movies and music from my iPhone to the new Mac Mini?

    If you still have the crashed Win computer, you may be able to recover your music and movies from the hard drive. If you have a friend with a hard drive USB connection kit and a PC, they should be able to help.  Otherwise, check locally for computer services that might do that for you (I think Best Buy Geek Squad may be able to help). If the drive itself is in good shape, it shouldn't be too expensive. 

  • My computer broke down and now i bought a new  Mac,  how can i get my music back from iTunes??

    my computer broke down and now i bought a new  Mac,  how can i get my music back from iTunes??

    Unless you subscribe to iTunes Match , Apple does not keep a backup of your iTunes library.  Even then it is not the library as it exists on your computer, but some version of the media, and only media files, not playlists.  Even then not all media are definitely available since anything removed from the iTunes Store since you purchased it is not available for re-download.
    FAQ: Why iTunes Match Can Not Be Used as a Backup - https://discussions.apple.com/docs/DOC-4112
    Using Match as a backup for iTunes - https://discussions.apple.com/message/17039436#17039436
    In your case it sounds like you will have to obtain non iTunes purchases from their original source or a backup you may have made at some time in the past.

  • The programs open tab ( list of programs open on comp) is always popping up on middle of screen whenever I go near the mouse.  HELP!!!  Have turned it off recently and moved it, a mac mini, now on new plug in and set up it now does it.

    The programs open tab ( list of programs open on comp) is always popping up on middle of screen whenever I go near the mouse.  HELP!!!  Have turned it off recently and moved it, a mac mini, now on new plug in and set up it now does it.
    Yes I have turned it off and restarted it, ubnplugged mouse and plugged it back  in.
    Have not updated it in a little bit
    running mavericks, which I dislike.10.9.1
    This is a new problem,
    Why where and what do I need to do to fix it? Please.
    Thanks for your help community, You guys are awesome, better than the guys n girls at Apple!!
    I have also noticed the drop down menu arrow on Numbers Tabs has dissappeared since move.
    you know the invisible arrow that appears in the additional tabs pages in "Numbers program"
    Especially an inconvenient for previous Numbers users as you all know.
    any word on New Numbers Tutes at all??
    You'd think with a Billion dollars they could make a 10 min clip saying here are changes guys, go enjoy new layout.....  Just saying...  not.
    anyway Hi and any help out there tonight is GREATLY APPRECIATED.
    Cheers Jason.

    If the reset doesn't work:
    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug (very important)
    5. Release Home button.
    ON COMPUTER
    6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
    7. Select "Restore iPad"...
    Note: Data will be lost

  • MacPro backed up to Time Machine, added Mac Mini now get "The backup disk image "/Volumes/Data/Jerry Booher's MacBook Pro.sparsebundle" is already in use." error when Mac Pro tries to back up

    MacPro backed up to Time Machine, added Mac Mini now get "The backup disk image “/Volumes/Data/Jerry Booher’s MacBook Pro.sparsebundle” is already in use." error when Mac Pro tries to back up

    It is standard Mountain Lion error due to the networking ability which is comparable to wet string. (actually that was lion.. it dried out some with Mountain Lion.. higher in the hills perhaps!!)
    See C12 and C17
    http://pondini.org/TM/Troubleshooting.html
    But many people are suffering the same issue..
    And the above is even a little out of date.. you might need to do a reset to the TC.
    Welcome to Apple's beta program for everyone.

  • New Mac Mini won't open DVD Player, I get an error

    This is a brand new mac mini (latest model bought two days ago), just opened and tried to open DVD player without any media on the DVD drive and the DVD Player doesn't open and I get this error:
    There was an initialization error.
    A valid video device could not be found for playback (-70017)
    What could that be?
    Wilfredo.

    No. The DVD Player always open even if there is no media in the drive.
    The problem was the Region. I needed to set the region on the drive, but the error message never told what was the problem, I had to figure it out myself.
    Wilfredo.
    Message was edited by: Wilfredo Nanita

  • I just bought a new Mac mini and can't remember my password to get into the computer. Is there anyway I can unlock my computer without loosing all my files, especially all my photos?

    I just bought a new Mac mini and can't remember my password to get into the computer. Is there anyway I can unlock my computer without loosing all my files, especially all my photos?

    Hi Jeff,
    Reset Password 10.7, 10.8...
    http://reviews.cnet.com/8301-13727_7-20087723-263/how-to-run-the-password-reset- utility-in-os-x-10.7-lion/
    Then Reset your Keychain...
    http://support.apple.com/kb/TS1544

Maybe you are looking for

  • How to deal with 0...n or 1...n mappings?

    Hi all, I'm relatively new to BPM. I've already made several processes that are working fine. However, I'm now stuck because, for the life of me, I'm not able to understand how to deal with data mappings of nodes of a cardinality greater than 1...1.

  • Installed Macromedia FlashPlayer successfully - cannot watch video on CBS website

    I installed the Macromedia FlashPlayer - it said that it was installed successfully. I restarted the computer & tried again to watch an episode of How I Met Your Mother - and it takes me to the same screen that says "The Innertube Broadband player re

  • File properties to document characteristics

    Hi Experts, In my project PLM 7.0, I have a requirement that I don't know if is possible. Each info document will have only one file original attached, ¿Is possible to read the metadata of the file and pass them to document characteristics? Best Rega

  • This approval workflow is killing me

    I know this should be simple, but here is what I am trying to accomplish: User 1 submits his expense report through an infopath form. Manager 1 gets form, reviews and approves or rejects it. If it is approved, it goes to: Director 1 gets form, review

  • Problem with removed profile

    i had a configuration profile set up for e-mail. I've since removed the profile but the e-mail remains and I can't delete it. Where the delete button should be it says it's been installed by a profile. The e-mail account is a POP account and it's cor