New Mac Mini Tiscali Router HELP!!!

Hi
My Dad has just bought his first Mac - a Mac Mini, presumably running Tiger. He is with Tiscali and had a USB modem (Sagem), but went to buy an ethernet adaptor today and the guy in the shop told him it was an old modem and sold him this new Router - an Edimax AR-7084gA. Consequently, any support I could find for Tiscali is now now good as it was concerning the Sagem modem. My Dad's getting very frustrated and I've tried to get him connected, but I'm doing it by phone as he lives miles away and I'm at work and I'm about to cry!!! I feel somewhat responsible as I told him to buy a Mac!
Please can someone tell me what to tell him to do over the phone - even the most obvious stuff. In the Network bit, he's selected the 'Built in Ethernet' option and in TCP/IP he's selected the Using DHCP etc and all the IP addresses and router things have come up, but he can't get any further. Are we doing something really stupid? Do we have to put in phone numbers or anything? The install disc for the router doesn't seem to work but I don't think he needs to do that anyway, as it's obviously seeing the router. It's really hard for me because I'm using an older OS than him and my windows don't come up with the same things.
I've used Macs for years and have set them all up in our office, but it's always been really easy.
Please, please help - no matter how obvious you think you're being, I'm sure it will help.

I would support the move away from the USB modem, but the new one needs some setting up. I just checked and you might like to look at this page, if you have not already done so.
I am pretty certain that all of these modem/routers have a configuration page hard wired into the device and this needs to be accessed using a browser. It may also be a good idea to try with an Ethernet cable before the WiFi as this is one element out of the equation.
Check with the manual, but the access to the configuration page is probably either at 10.0.0.2 (that is all that you need to put in the browser URL space) or at a number beginning with 192..
The 10 series or the 192 series are healthy: you are on the way. A series beginning 168 means that the IP number is self-assigned.
What you have here, "Built in Ethernet' option and in TCP/IP he's selected the Using DHCP etc and all the IP addresses and router things have come up, but he can't get any further" is right.
But it may be that he is not connected to the system without account details being entered: the method may depend on the particular IP.
You may also need DNS numbers for his connection.

Similar Messages

Having trouble using a Samsung LCD HDTV with my new mac mini...help?!

I have a brand new mac mini running snow leopard. I am trying to use a samsung HDTV (1080i). I've got the display connected and it is working but the font on the windows is not very crisp at all...it is actually hard to read. I've adjusted the resolution in my settings to all the different options. When I use the 720p option the font gets a little better but the windows are HUGE, when I use 1080i the windows shrink to the correct size but the font gets worse. Anyone have any ideas?

Be sure to designate the HDMI input on the Samsung TV as a 'computer' source. This seems to help how it presents the image on the TV. The other thing to adjust is the font smoothing settings, via System Preferences > Appearance.

My D420 is not working on my new Mac Mini I need help

I have a new Canon Printer D420 . I love the machine works great
the price was great. It worked good on my old Imac for a few weeks then
I bought a new Mac Mini and now I can't get it to work. I reloaded my
solfware taht came with it..... need help
thanks
Ray Land

Hi Ray Land,
We can help narrow down the cause. What operating system are you using on your new Mac Mini?
If you are running the Mountain Lion OS, you can download the latest driver here. An important note is that the current print queue must be deleted before installing the new driver. This will ensure proper communication.
If this doesn't work or you need further assistance, please contact us here.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

New mac mini user needs help with games!!!!

We have a mac mini with osx 10.4.5 we have some older games that are compatible with Mac and say for 7.5 or higher but when we try to play them it says not supported on this system. Can any one help us out?
Thanks!!!!

Is it an Intel Mini, or a G4 ??
Mac OS X is completely different from OS 9 and the previous versions of the Mac OS. While OS 9 can run OS 7 apps, OS X will not. However, you can install a copy of OS 9 on your drive, and although you cannot boot directly in OS 9, you can run OS 9 apps from within OS X through an application called Classic. That is, assuming your have a PowerPC Mini, as new Macintels don't support Classic anymore.

Which new Mac Mini to buy?

I'm looking to buy the new mac mini. Please help me decide which one that I should buy based on my uses. I will use this computer for app development, internet browsing, some photo editing, and maybe even for games. I know that I will at least need the mac below:
2.5GHz : 500GB
2.5GHz dual-core Intel Core i5
4GB memory
500GB hard drive1
AMD Radeon HD 6630M
OS X Lion
But what upgrades should I invest in? With my uses will it be worth getting the 2.7GHz Dual-Core Intel Core i7 and the 750GB Serial ATA Drive @ 7200 rpm??
If not just say so and tell me what your opinion is.
Thanks in advance.

>With my uses will it be worth getting the 2.7GHz Dual-Core Intel Core i7 and the 750GB Serial ATA Drive @ 7200 rpm??
Yes and yes if you plan on doing photo editing and games. I would also get 8 gigs RAM, but by all means get it aftermarket.

Airport Express problems with new MAC MINI and DLINK router SOLVED

Hi just thought I would post this as it may well help others experiencing similar frustrations with new core duo mac mini and wireless connection or quality problems across the network / internet etc
I have a 3 week old, new mac mini core duo 1.8ghz 2gig ram, 120gb disk - First Mac, connecting to my exisiting wireless network via DLINK ADSL Router 2MB Broadband also one windows laptop and pc also wireless on the network and two airport express potins to stream itunes to
Problem was briefly
Mac worked fine, but the network connection just far too slow, laptop and pc, 1800+ kbps downstream mac mini 90 - 150kbps (http://www.adslguide.org/tools/speedtest.asp)
also if i ping the router directly from terminal (ping -c 20 192.168.1.1) average response 12+ ms with 20% packet loss, yet laptop and pc avg 2ms no losses
Spent 2 evenings on frustrating calls of more than 1 hour each (due to being cut off , then ring back and closed etc etc) and carrying out a the helpdesk troubleshooting (I am an IT consultant I think I am above this level), eventually an archive and install of the os as well
last night I call for the third time, insisting I dont wish to carry out any further troubleshooting, and want it replaced and resolved or my money back
I receive a call back from product specialist (not sure if thats mac mini specialist or airport) but we resolved the issue (his knowledge far superior to the help desk do this do this attitude)
between us we carried out the folowing and resolved the problem and I am now very happy
mac now downstreaming also in excess of 1800kbps (as expected for 2mb broadband)and no packet loss
This problem was resolved by switching off the turbo option hidden away in the routers settings, under wireless configuration
Supposed to improve performance, but its rubbish and will make hardly any difference under mac os to the speed but will certainly affect your mac mini performance(you may have a similar setting switched on in your routers and mac os dont like it)
We stumbled across this by first disconnecting one of the airport express devices from my dlink network, and using it on its own default apple wireless settings, effectively making it a standalone wireless network, and not via the dlink router
we then carried out the same ping with the ip address of this device (from airport admin utility default 10.0.1.1) and the results were fantastic 2ms avg no package loss
this established it was something with the router, and how we then interrogated the routers settings and found the turbo on option within wireless configuration
you may not be able to replicate this if you dont have an additional network you could join (such as airport express), but probably worth checking your own router settings for something similar
Hope that may be of assistance to others, sorry that its a bit long winded and garbled, but I'm just so excited to finally get my new mac working as i would expect it to
Also perhaps insist on speaking to a product specialist immediately that the helpdesk are unable to help you

Hello macfar14. Welcome to the Apple Discussions!
For just streaming iTunes and/or for sharing a USB printer, the AirPort Express Base Station (AX) just needs to be configured as a wireless client ... which you already attempted to do.
Just to be sure nothing was missed, here are the basic steps to do this:
Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing wireless network's Network Name or SSID>
o Wireless Security: <select the encryption type of the existing wireless network>
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked)

Just got a new mac mini and I can't figure out how to authorize it. Help!

Just got a new mac mini and cannot figure out how to authorize it. Help!
m

Link your phone number and Apple ID for use with FaceTime and iMessage

HT1554 Apparently, I don't know my "com.apple.smig keychain" password. And I'm in the middle of setting up my new Mac mini. I transferred data from my MacBook and what I thought was the password isn't working! Help!!

Apparently, I don't know my "com.apple.smig keychain" password. And I'm in the middle of setting up my new Mac mini. I transferred data from my MacBook and what I thought was the password isn't working! Help!!

Hello,
See if this helps...
Mac OS X 10.4 Help, I forgot a password in my Keychain
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1960.html
Mac OS X 10.4: Keychain Access asks for keychain "login" after changing login password...
http://support.apple.com/kb/HT1631
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544

Cannot install windows 7 on brand new mac mini with 256 g sdd? Please help.

Cannot install windows 7 on brand new mac mini with 256 g sdd? Please help.
Have tried all tricks found on the net and followed every advice from apple support.
Still black screen with blinking curser when mini is rebooting following partitioning via bootcamp.
Very nice and fast mashine, wouldnt like to return it.
thanks allan

Is that an Apple SSD?
what model is it?
Is there a firmware update if non Apple?
Lion is not server version.
Windows is ? ISO or retail?
Google macmini Windows 7 SSD Apple Boot Camp

I just bought a new Mac mini but cannot complete the set up and I could not pair my apple wireless keyboard with mac min. Can someone help?

I just bought a new Mac mini but cannot complete the set up, as I could not pair my apple wireless keyboard with mac min. Can someone help?

Bluetooth: How to set up your Apple Wireless Keyboard

Decided to upgrade from an old PowerBook G4, mostly for eyesight issues. Bought a new Mac Mini and hooked it up to an Apple A1267 Cinema Monitor. I cannot even figure out how to turn them on. Help please.

I am exhausted just getting to the point of being allowed to ask my question. I recently decided to upgrade from an old PowerBook G4 that we have used for years, and am using now. I bought a new Mac Mini and a reconditioned Apple A1267 Monitor that was working beautifully when hooked to a slightly newer PowerBook in the store. Both the Mini and the monitor are plugged in, and attached to each other but I feel light a dolt. I cannot even figure out how to turn them on or even get a power light to come on. Can someone help me?

How is the Mini coonected to the momitor?
Does the power button n the mini not work?

I have just switched from windows and bought myself a new mac mini, only had it a few weeks and already getting message not enough free space. Help, surely cant be out of space already

I have just switched from windows and bought myself a new mac mini, only had it a few weeks and already getting message not enough free space. Help, surely cant be out of space already

It sounds unlikely of course. But from your question it's hard to tell what might have filled your HDD. Are you constantly on file sharing or has filled the drive with movies?
Best way to tell is to start checking what folders occupy space. "Get Info" for the HDD and its subfolders is a way to start checking where the data in question resides.
And as BGreg say, call Apple support is also a good way to begin with.

HT1338 My new mac mini can't find my Powershot S410 digital camera. Therefore I can't import any photos from it to iCamera. Can anyone help?

My new mac mini can't find my Powershot S410 digital camera. Therefore I can't import any photos from it to iCamera. Can anyone help?

My new mac mini can't find my Powershot S410 digital camera. Therefore I can't import any photos from it to iCamera. Can anyone help?

Help connect my new Mac Mini with my stubborn HP Printer!

I just got a used, but cleaned up Mac Mini. My HP Deskjet 6980 printer, worked flawlessly with my old G4. Right out of the box, i didn't need to install a driver, i just hooked up the USB ( most simple of the 3 connection options), and it worked fine. Now that i have a new Mac Mini, i hooked it up, it recognizes the HP printer in System Prefs, but when i try to print i just get page after page of strange code. I installed the printers' installatin cd (which, i didn't even need on my first computer), and It still won't print. Again when i hit "print"... just endless code.
What can I do. I am not totally computer computer literate or familiar with all the terminology, so please, keep it simple. Thanks so much for your help.

You don't say, but first thing we need to know is whether you have a G4 Mini or and Intel Mini. (Intel Mini has 4 USB ports on back, G4 has 2 USB ports.)
If you have an Intel Mini, odds are you need to download the latest drivers for Mac OSX 10.4 (Tiger) from the HP site. The drivers on the old CD probably won't work right with an Intel Mac. And you may have to uninstall all the HP stuff you have already installed from the CD.

I have a new Mac mini and are using an Acer monitor. Unfortunately, the Acer will not show any image on a startup from cold. It does however work completely correctly when restarting from 'sleep' condition. Can anyone help? Thanks in anticipation.

I have a new Mac mini- changed from Windows XP. I have a peculiar problem. I use an Acer monitorwith the Mac which works fine when the Mac is 'un-sleeped'. But, if I have shutdown the Mac the Acer does not recognisethe start up - at least it shows nothing on screen. When I have shut down - nowknowing the problem, I use an old Samsung monitor to cope with the start up -it does so fine - and then put the Mac to 'sleep', then change monitors andrestart the Mac - the Acer is now fine. I am using the same cables for theSamsung and the Acer. The Acer had no problems with my old Windows system -from sleep or shut down. I really do not think there is anything wrong with theAcer - could it be some sort of recognition problem? Please can anyone assist.Donald Picton

I posted the same question a day ago with no response. I'm using an Acer x193w. You actually don't have to switch monitors to get it to work. Just make sure you turn off the monitor after shutting down the Mac mini (actually push the power button on the monitor, not just let it go to sleep). If you turn on the monitor (push the power button on the monitor), then power up the Mac mini, the monitor is recognized. The issue didnt exist with Snow Leopard for me. It only started after I started using Lion. Hope this issue gets fixed In a future OS update.

New Mac Mini Tiscali Router HELP!!!

Similar Messages

Maybe you are looking for