New mac mini w/HP monitor issues - 1st apple

just purchased mac mini, hooked up to HPw19e monitor via VGA adapter cable. Montior had previously been greta, now font is fuzzy and can't calibrate to fix. If I get a DVI / HDMI cable to monitor instead, will that help?
frustrated - thanks for any help, new to macs as was looking forward to the out of the box experience...

1440 x 900 (the native pixel resolution of that display) is the ONLY resolution that will give you a sharp display. Are you using that resolution?
DVI/HDMI will be a little sharper, but even VGA should be pretty good. If it's fuzzy, there's a settings problem.

Similar Messages

New Mac mini & Formac 1740 monitor issue

I've just bought a new mini, hooked it up to my TV using HDMI and all was good. However when I swapped it over to my Formac 1740 display using the HDMI-DVI connector all I get is a blank screen, as if the monitor isn't getting a signal. The Formac runs a powered ADC-DVI converter with the DVI connector being DVI-D. I then tried a Thunderbolt-DVI. Still no display. It works perfectly fine on my old PC.
Any ideas on how I get the Mini to work with the Formac?

Hello, multiple Adapters may not work in certain situations, but when connected to he TV, can you set a
1,280 x 1,024 resolution, then try he Formac?
Can you hook both up at once & look in the Displays prefpane?

New Mac Mini and suitable monitor

As I have a MacBook Pro and iMac, I'm thinking of buying the top Mac Mini and using it with an hdmi monitor. What concerns me, and is vital, is that the image I'm going to be looking at is as good as it can be. Obviously the Mac Display Monitor is absolutely brilliant, but my budget doesn't run to that. Has anyone got any direct experience they can share over purchasing, say a Samsung with hdmi etc, and the image quality it delivers?

Are you interested in a TV monitor or a computer monitor ?
I have a Dell U2412M (24 inch) monitor, does not have HDMI, but hooked up both to try out, a Mini Displayport to Displayport cable and later a DVI to DVI/HDMI adapter cable and both of them worked just fine. The monitor cost me $299.00 on sale at the Dell Business site, but looking around you can get it for slightly less.
MacMini 2011 has both a HDMI input and Displayport input

Wireless Keyboard don't connect with new mac mini

Hi,
I just received my new Mac mini server 2011 and bought an Apple wireless keyboard (already have a magic mouse). At first start up of my Mac mini picks up my magic mouse and I can use it but does not pick up my wireless keyboard? Is this normal? Am I missing a trick with the keyboard? Do I first need to use a normal USB keyboard to configure my Mac mini and then when Lion is setup it will install the driver for the wireless keyboard?
Regards,

I just bought new Mac mini w/ wireless keyboard and track pad. During initial setup it would not pair to keyboard but it di see trackpad. I could not complete setup, I have no control. Brought home USB keyboard from work and resumed setup. I'm stuck again. In setup it's asking for a trackpad click to continue. The trackpad will scroll, but will not click. The whole system is two days old and nothing works I tried to contact support through the lengthy online screening process and apple ultimately say the new system doesn't qualify for free support.
Totally ******. I'm back to using my old pc.. What to do with this expensive boat anchor from apple?
Really could use some help here
Thanks

I need to do a reset on my new mac mini so I can return this to the apple store

I need to wipe my personal files off this new mac mini before I return to the apple store. a factory reset

Click here and follow the instructions.
(115451)

New Mac Mini/OSX not recognizing Apple extended keyboard

I recently purchased a new Mac Mini. I also purchased a Apple (extended) Keyboard (usb cable connected with 10 key pad and full F keys).
When I initially plugged in the keyboard the OS setup screen indicated that it didn't recognize the keyboard. I tried setting it up several times, it doesn't seem to "see" the correct keys as I try to set it up. When prompted to "press the key to the right of the SHIFT key, when I do so I get a sound, no other response and the setup goes no further.) Some keys do not function properly (for example the sound up and sound down keys do not work). The general input for the keys work (I am typing this text with it), but it seems weird that an Apple device does not recognize another Apple device.
Is there something I need to do to complete setting up the keyboard? Are there any articles about this particular problem? I wasn't able to find any in the forum or help files.
Thank you,
Tim Kern

Thank you for the reply SilverSkyRat,
I checked the settings and USB ports for the keyboard connection. Still no-go with the "configure your keyboard" recognizing keys on the keyboard. I have also been trying to use the sound up and sound down keys and they do not function either. I will try another keyboard later today.
Thank you again for your reply.
Cheers,
Tim

Decided to upgrade from an old PowerBook G4, mostly for eyesight issues. Bought a new Mac Mini and hooked it up to an Apple A1267 Cinema Monitor. I cannot even figure out how to turn them on. Help please.

I am exhausted just getting to the point of being allowed to ask my question. I recently decided to upgrade from an old PowerBook G4 that we have used for years, and am using now. I bought a new Mac Mini and a reconditioned Apple A1267 Monitor that was working beautifully when hooked to a slightly newer PowerBook in the store. Both the Mini and the monitor are plugged in, and attached to each other but I feel light a dolt. I cannot even figure out how to turn them on or even get a power light to come on. Can someone help me?

How is the Mini coonected to the momitor?
Does the power button n the mini not work?

Using ADC Monitor with the new Mac Mini

My husband has an Apple monitor with an ADC connection. I would like to purchase the new Mac Mini, but would like to use his current monitor. I know there is an ADC to DVI adapter, but the new Mac Mini uses the Mini Display...could I use yet another adapter? I am trying to save money, but don't want to the display quality to be really poor. Space is not an issue. Any help would be greatly appreciated.

I have located that, but my concern is the DVI connection to the Mini Display connection on the Mac Mini. My understanding is that they are different.

I have a new Mac mini and are using an Acer monitor. Unfortunately, the Acer will not show any image on a startup from cold. It does however work completely correctly when restarting from 'sleep' condition. Can anyone help? Thanks in anticipation.

I have a new Mac mini- changed from Windows XP. I have a peculiar problem. I use an Acer monitorwith the Mac which works fine when the Mac is 'un-sleeped'. But, if I have shutdown the Mac the Acer does not recognisethe start up - at least it shows nothing on screen. When I have shut down - nowknowing the problem, I use an old Samsung monitor to cope with the start up -it does so fine - and then put the Mac to 'sleep', then change monitors andrestart the Mac - the Acer is now fine. I am using the same cables for theSamsung and the Acer. The Acer had no problems with my old Windows system -from sleep or shut down. I really do not think there is anything wrong with theAcer - could it be some sort of recognition problem? Please can anyone assist.Donald Picton

I posted the same question a day ago with no response. I'm using an Acer x193w. You actually don't have to switch monitors to get it to work. Just make sure you turn off the monitor after shutting down the Mac mini (actually push the power button on the monitor, not just let it go to sleep). If you turn on the monitor (push the power button on the monitor), then power up the Mac mini, the monitor is recognized. The issue didnt exist with Snow Leopard for me. It only started after I started using Lion. Hope this issue gets fixed In a future OS update.

Seeking new Mac Mini monitor advice

I'm about to purchase a new Mac Mini i5. Any advice on an alternative monitor to the Apple 27 inch Thunderbolt monitor? I'm replacing an old 2006 24" iMac. Mahalo!

Unfortunately, GKaya, I don't have any advice beyond what you might find in some of those posts. I received my Mac mini on 12/14/12, and the Mac mini EFI firmware update had just come out 12/10/12. So I never had any flickering issues with a 26" 1080p Vizio TV or now a 27" 1080p AOC monitor, each in turn connected via HDMI. And I have not had the "crushed whites" issue that a few folks still have. I'm not sure what the issue there is. I didn't do anything out of the ordinary to avoid it. I just plugged the TV and the monitor straight into the mini's HDMI port with an Amazon Basics HDMI cable and used the default monitor settings.
And the picture is great. I eventually calibrated the picture with the AOC, but in the end, it made a very subtle difference, a matter of preference in brightness and temperature, not quality.
There are reports that the beta off OS X 10.8.3 fixes the remaining HDMI graphics issues, so here's hoping that you'll be rescued soon.
John

New Mac Mini with Lion Video Problem With Dell E228WFP monitor

Just purchased a new mini Mac 2.3 with Lion pre installed. I connected to my old Dell E228WFPI monitor via the Mini Display to VGA adapter. The mini mac worked fine for an hour until I put it to sleep. It would not rewake. After rebute the gray screen and apple logo appear with clock, but after clock screen to black and monitor goes to power saver mode. Took unit to apple store twice and could not resolve problem by changing resolution or other methiods. Finally, we learned that the system works fine using Belkin HDMI to DVI cable. This Dell Monitor had DVI connector. Hope this helps...

How can a computer that's been turned off (and I mean completely OFF) get a network request? Only a sleeping computer should react to such a request. If you're sure you shut down (Apple Menu, Shut Down), then only an internal power supply or logic board problem should cause this. The only way it could be software is if Lion is not shutting down the computer but is instead putting it to sleep. Is it a new Mac Mini? If so, you should have it replaced or repaired.

How can I connect a new mac mini to my old vga monitor? There doesn't seem to be a mini display port

I have an old monitor with VGA port, and was wondering if anyone knows how to connect this to the new mac mini. Older mac minis have the mini display port, and if that were the case I would use the mini display port to VGA adapter, but this new mac mini doesn't have one. It just has the thunderbolt port or HDMI port for displays... I've been looking for an adapter to connect my display to one of these but cannot seem to figure it out. Any advice? Thanks in advance.

The Thunderbolt port is the one to use; you use the same mini-DisplayPort adapter you used for the older minis.
Regards.

Which adapter do I need to connect my new Mac Mini to my old Apple Cinema HD monitor?

I have a perfectly good Apple Cinema HD monitor (model M8536), but it has an ADC connection, and my new Mac Mini isn't compatible with it. I've bought a new screen for the Mac Mini, but there are going to be times when I need to run two screens in parallel on the Mini. Can anyone tell me which adapter I need to do this? I've looked at the Apple DVI to ADC connector (M8661LL), but I'm not sure this is what I need, and they're quite pricey, even second-hand on eBay, so I don't want to make a mistake!
Thanks!

Thanks, dwb ... unfortunately I don't think I'd get very much for my old display, it's so old (> 10 years)! But it still works perfectly, and I'm loathe to throw it away ... and there are going to be times when I need the two screens, so even though I've bought a new 27" Philips monitor, it would be good just to buy an adapter to hook up the old screen ...

New Mac Mini thunderbolt to DVI adapter issues

Hi there,
I'm working on a new studio installation. We have a new Mac Mini that we're trying to connect up to a 30-inch Cinema HD display with DVI input. We have a Kanex C30 Mini DisplayPort to Dual-Link DVI adapter that plugs into the Thunderbolt port and one of the USB ports (for power) on the back of the Mini, but despite our best efforts we aren't getting anything on the display. Going Mac - adapter - display results in about 7/8ths of the screen going white and displaying two green and misshapen Apple logos for about 5 seconds before it goes blank.
Ultimately we want to run it over quite a long DVI cable and currently have an Extron signal booster in place, which works perfectly from the Mac Mini's HDMI output through an HDMI to DVI adapter. However we're already using the HDMI output to feed another monitor.
So two questions really:
1. Can the Mac Mini feed two separate displays of different sizes? The 30-inch over Thunderbolt to DVI and another Apple 24 inch display over HDMI to DVI.
2. Does anybody have any experience with the Kanex or can you recommend an adapter that will work for us?
Any suggestions would be greatly appreciated. This whole process has been a very long headache!
Many thanks,
Josh

Hi Josh,
It should work, but not Mirrored of course, just Extended Display...
Video Card:
HD Graphics 4000
VRAM Type:
Integrated
Details:
This model has an Intel HD Graphics 4000 graphics processor that shares memory with the system. Also see: What type of video system is provided by the Aluminum Mac mini models? Which are integrated and which are dedicated? Can the video be upgraded?
Standard VRAM:
512 MB*
Maximum VRAM:
768 MB*
Display Support:
Dual Displays
Resolution Support:
1920x1200*
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600*
Details:
*This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
http://www.everymac.com/systems/apple/mac_mini/specs/mac-mini-core-i7-2.6-late-2 012-specs.html

I have a new MAC MINI and I want to install a second monitor. I have one connected to the HDMI and it works. I can't get a signal to the other one. It is connected from the thunderbolt to its HDMI port. How can I make it work?

I have a new MAC MINI and I want to install a second monitor. I have one connected to the HDMI and it works. I can't get a signal to the other one. It is connected from the thunderbolt to its HDMI port. How can I make it work?

Could be a bad cable or bad Thunderbolt port.
You have 90 days of free telephone support on a new device. You can call them at 1-800-MY-APPLE. Have your Mini's serial number handy
You can also make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

New mac mini w/HP monitor issues - 1st apple

Similar Messages

Maybe you are looking for