New Mac mini won't see old Apple Keyboard/Mouse

Just got a brand new macmini, got my apple display plugged into it and working, turned it on. It recognized my apple wireless mouse for a couple clicks, then when I got the screen to enter in the serial number, it wouldn't recognize my keyboard. And now it doesn't recognize the mouse either.
I brought home a Logitech wireless keyboard/mouse combo from work and was able to setup the server that way, but it still won't recognize my Apple brand keyboard/mouse that worked fine on my old PowerBook. I've rebooted several times.
Any ideas?

Hello mc:
The devices, if paired with another system, need to be deleted from the Bluetooth preferences (you need to disconnect them in the BT preference pane and then delete them). Then a restart should begin the connect/pair sequence.
BT devices may only paired with one system at a time.
Barry

Similar Messages

  • My new mac mini does not see usb drives, but in hardware info the usb is visible

    my new mac mini does not see usb drives, but in hardware info the usb is visible
    i'tried several usb flash drives even brand new ones, they are visible onder hardware info but they are not on the desktop nor in the finder.
    what is wrong and doe anyone has a solution ?

    It does not show up in disk utility, its only visible through systeminformation.
    When you plug in the USB flash drive and then refresh systeminformation it becomes visible.
    To remove it I shut down the computer because I cannot eject the USB device anywhere.
    After starting up again when I have removed the flash drive it has gone from the systeminfo USB list.
    By the way my USB mouse and keyboard are working fine, I also changed ports of these and they still keep on working so I don't think the USB ports are defect.
    I guess it some kind software problem, and because I'm new to Apple I do not know much about it how to solve this.

  • Suddenly Mac mini won't "see" external drives. Possible related to OS software update to 10.6.8?

    Suddenly Mac mini won't "see" external drives, neither Firewire nor USB. Possible related to OS software update to 10.6.8? Worked fine under 10.6.4. Any advice? Thanks.

    Turns out it was nothing to do with the OS update, it was just a loose cable plug connecting my FireWire/USB hub to the computer. But your tip is a good one -- I'd been wondering why the external drives (even when mounted properly) weren't showing up in the sidebar. Thanks!

  • New mac mini won't accept dvd's/cd's in the combo drive

    Hello friends:
    i have a new mac mini that I bought about 2 months ago (Intel, 2.0 ghz). Everything was working fine until I went to put in a DVD today. The combo drive won't accept a disc. It's not that it won't read the disc, it physically won't suck it into the drive. Instead it just sits there. If I try and push it in, nothing happens... it just bounces back out at me as if pushed by a spring. And, no, there isn't already a disc in the drive.
    Can anyone suggest how to get my combo drive to work again?

    Hi jrm27,
    I have an older Mac Mini 1.66 GHz, but I haven't seen this problem.
    I take it that the disc does go in a little way. I would think that that rules out that the drive thinks there's a CD already in the drive. I know that when I have a CD or DVD in the drive, the little doors (they're really there) are closed and won't let me insert a 2nd CD.
    I presume that you have restarted your system since this started to occur?
    When the system is rebooting, hold down the mouse button. This is supposed to force eject a CD. It might also trick your system into thinking there's no CD there, or resetting something.
    Try different types of CDs or DVDs, just to make sure that there's not something screwy with the media that you are using. Try an old-fashioned music CD or something.
    Are there any sounds the drive makes?
    David

  • New mac mini won't start up...

    I just got my new mac mini today and it won't start up. After some research I discovered that the icon on the screen is telling me to put batteries in my mouse. There are batteries in my mouse. I shut it down and restarted it again, making sure my wireless keyboard and mouse were turned on. That didn't work. Then I tried turning them on after I started the computer. That didn't work either. I'm sad.

    I have had the same issue (new Mac Mini, client OS, new wireless keyboard and trackpad ... connected using HDMI cables through my receiver to my TV).
    First I got stuck on a spinning doughnut right out of the gate. Phone tech support told me I needed a wired keyboard. While I didn't like the idea, I went down to the apple store to buy that and they told me there was something wrong with the Mini and to bring it in. Today I did took the unit in; they discovered a faulty harddisk and replaced the unit without much hassle (nice).
    Before leaving the store, I told them what phone support had to say about requiring a hardwired mouse and keyboard for setup. They told me it used to be necessary but that is not so nowadays. I happily left the store expecting no other issues.
    Now here I sit. My trackpad is recognized but my keyboard is not. I can't get past the nearly indecipherable screen showing me how to power up these devices for discovery and pairing because it doesn't recognize the keyboard. And since I don't have a wired keyboard anywhere in my house, I'm looking at my 60 minute roundtrip to the apple store. sigh
    I'm most upset about that part. If they'd simply set my expectations that I need a wired solution for setup, I wouldn't like it but at least I'd know and wouldn't spend endless time wasting gas simply to get to step 2 of setup.
    I've been a big fan of the iPhone an iPad but I have to say that Windows PC setup (while a tad slow) is MUCH more straightforward than this. At least I have some workaround options that get me moving. Works out of the box, my @#$.

  • New mac mini won't pair with new wireless keyboard

    How do you set up a new mac mini with a new wireless keyboard bought separately ... computer does not see the keyboard.
    I've seen this question asked before but the only answer seems to be to get a usb keyboard for set up. So do I need to go out and buy another keyboard to complete the set up or is there a way around this
    Thanks.

    see > New Apple Mac Mini and Apple Wireless Keyboard Un-boxing - YouTube
    If you missed the setup, most any cheap'o generic USB keyboard will work with the Mac Mini.

  • New Mac mini won't recognize iPhone or iPad w/o cord

    My new Mac Mini doesn't seem to want to sync with my iPad 2 or my iPhone 4s without plugging them into the mini with a cable. Why is this, and can I change some settings to make it recognize them without a cable?

    Upgraded to Lion a few months ago, and work remotely from home using Timbuktu Pro which I've used for years.Have been using Lion for the past few months without problems. In the past few weeks if the remote computer, a mac mini  (at my office) is not accessed, the screen appears to be gray when viewing remotely and I cannot wake it up. Energy saver preferences are set to wake up with network access, never go to sleep, keyboard is an Apple USB as well as USB mouse. I had used a bluetooth mouse & thought that might be the issue, so I disconnected it at the end of the day although Bluetooth is still on. Tried disconnecting an external drive (USB) but that didn't make a difference. The only way it will wake up is if someone at the office physically clicks the mouse a few times, then it wakes up. I've tried sending a fax to the remote computer as the office fax machine is connected to the remote computer; the fax is received as it shows up in the Dropbox, but that doesn't wake the mac mini. Very puzzled as all worked well until a few weeks ago. Display has not been changed (DVI), have not added new peripherals although I do have a powered hub connected to the remote computer which I haven't tried disconnecting. Bottom line is that nothing has changed other than Lion upgrades. As so many people are having a problem, I suspect this is a Lion issue. The remote mac mini is approximately 2 years old. I upgraded the RAM about 6 weeks ago to 8 GB (Crucial) and haven't tested that, but it was working fine after the RAM upgraded until recently.

  • Specs of new Mac Mini worse than the old Mac Mini?

    I just looked at the new Mac Mini, released today I think, but it seems that you can no longer select SSDs, and the highest-spec Mac Mini had TWO SSDs available - not available anymore!
    Also, I waited for this update with the hope that MORE RAM would be available - I really want a 32GB machine to run as a slave, and I need LOTS of RAM for this machine, but there's no option for that without buying the Trash Can Mac Pro, which has all sorts of features that I DON'T need.
    What is the go with Mac Mini specs going BACKWARDS?
    Also, any advice would be great. I'm considering having a PC made for my slave computer, but I'd rather not do that, PCs suck. lol.
    Thanks!

    The new Mac mini does support 'flash' storage aka SSD storage. The difference is that the Apple listed options for the new Mac mini for flash aka. SSD storage now use the PCIe interface and not the old SATA interface. PCIe is much faster than SATA.
    The new Mac mini does support a 'Fusion' drive, this is Apple's 'hybrid' drive approach which combines a traditional hard disk with a 128GB of Flash storage. Since the new Mac mini does support a Fusion drive and a Fusion drive includes a traditional hard disk we can safely deduce that the new Mac mini does have at least one traditional SATA drive bay.
    What is not yet clear is how many PCIe flash storage connectors it has and how many SATA connectors it has. It could be for example that the 1TB flash storage choice is actually made up from 2 x 512GB, however since the new Mac Pro also lists the same PCIe flash storage choices of 256GB, 512GB, and 1TB and the new Mac Pro only has a single PCIe SSD connector it is highly likely the new Mac mini also only has a single PCIe connector.
    While it would be nice if it still had the option of two SATA drives and also a single PCIe flash drive, I think it is more likely that there is only one SATA connector. This makes internal RAID1 less practical, not only would it now be very hard to get two matching capacity 'drives' but even if you did they would be at vastly different speeds. One can still use external RAID storage.

  • How do I pair my new Mac mini (mid 2011) and white Apple Wireless Keyboard (2003)?

    I just bought a new Mac mini (mid 2011) and can not set it up via my Apple Wireless Keyboard (2003). I'm disheartened but not surprised that my Bluetooth 4.0 Mac isn't backwards-compatible with my Bluetooth 1.0 keyboard. But I can't find any documentation confirming the fact that my non-paired, but tested & perfectly functioning keyboard will not work with current Macs.
    I was however, able to locate a tech support doc (http://support.apple.com/kb/HT4112) that mentions my Apple Wireless Keyboard (2003) is not compatible with iOS devices. (Which is not critical because iOS provides a non-physical keyboard. Aside, it would be lovely were Apple to add a non-physical keyboard to Mac OS X, if only so new desktop owners can continue to set up their Macs in a pinch.)

    I just bought a new mini mac (lion 2011) with a wireless keyboard.  I could not get the mac to recognise the keyboard.  Spent several hours back with the Genius team who replaced keyboard and mac but did not get anywhere.  They gave me a wired keyboard, was able to configure the mac and then it recognised the wireless keyboard.
    Seems this is a problem with the new mac/OS

  • New Mac mini won't come out of sleep because trackpad won't connect

    I have a new Mac mini with a trackpad. When Mac is in sleep mode I can't wake it as trackpad and keyboard won't connect. On occasion they do but the Mac takes ~5mins to fully wake.
    Andy

    I have a new Mac mini with a trackpad. When Mac is in sleep mode I can't wake it as trackpad and keyboard won't connect. On occasion they do but the Mac takes ~5mins to fully wake.
    Andy

  • New Mac Mini won't open DVD Player, I get an error

    This is a brand new mac mini (latest model bought two days ago), just opened and tried to open DVD player without any media on the DVD drive and the DVD Player doesn't open and I get this error:
    There was an initialization error.
    A valid video device could not be found for playback (-70017)
    What could that be?
    Wilfredo.

    No. The DVD Player always open even if there is no media in the drive.
    The problem was the Region. I needed to set the region on the drive, but the error message never told what was the problem, I had to figure it out myself.
    Wilfredo.
    Message was edited by: Wilfredo Nanita

  • New Mac Mini won't recognize passcode for wireless keyboard

    Just unboxed my new Mac Mini and have started the install process.  Made it to the wireless mouse ok, then the keyboard.  It finds the keyboard, gives me the passcode, then I enter it and press enter as requested, and nothing happens.  It just spins through the process again and again.  I have installed new batteries, turned all things on and off at random, and turned off bluetooth on all other devices that might be interfering.  Any ideas?

    Take the batteries out of the keyboard
    Turn off the computer
    Put batteries back in keyboard and hit the power button on the side
    wait 5 seconds
    turn on mini
    go back through the setup process
    works every time for me

  • New mac mini system will not recognize wireless keyboard and trackpad.

    My brand new mac mini system will not initialize properly.  The return on the track pad are not being recognized, although scrolling is. Any others find this?  Support could not figure this out on the phone.  They sent me out to get new batteries and now they are closed.  Batteries have been changed and still nothing.

    My Mac MINI gave me one heck of a time trying to get it  to recognize my Bluetooth mouse and keyboard. both Apple brand.
    I finally had to connect an old USB mouse and keyboard to get the silly thing to connect. 
    Don't forget to repair permissions. 
    I also had to shut the computer down and start it back up a couple of times before it would connect.  I think it has to do with the new Bluetooth 4.0 wireless technology.
    I also turned off my Bluetooth devices and turned them on again, then I pulled the batteries out a couple of times and tried again and again.
    I also put in new battries even thiough the ones I replaced were about a week old.
    Finally, the MINI recognised the mouse and keyboard.
    I wish I could tell you which thing did the trick.

  • Brand new mac mini won't boot

    I bought a mac mini for my teenaged daughter because the lap top options simply weren't in our price range. I have a high end dell monitor that is about five years old. It hasn't been used regularly so I felt this was a good fit. I was reassured by several that my peripherals would work with the mac mini... no problem. We had to buy a new keyboard, mouse and adapter for the monitor. This took several days and two trips to two different stores to accomplish. We finally got everything set up and working properly or so we thought. The system struggled to download office suite for mac. The system stopped working completely after attempting to download norton anti-virus for mac. Now the system won't boot at all. I've only tried to turn the system on and off to get it working again. I had it up for five minutes yesterday but again it shut down for no reason and now I can't get it back up at all. I usppose a trip to the Apple store is next on the list. Any suggestions are appreciated.

    That is good news...the genius bar folks are generally great to deal with.  Especially when you make an appointment and don't get all upset while waiting for someone to get free
    As was said at the outset, be careful about software you install, not all is really good or necessary.  If in doubt, just pose a question on here and you will get sound advice.  We are all fellow users, many of whom have learned the hard way.
    Keep in mind, this is a Mac OS X machine, not Windows which has everyone in the world writing viruses to attack.
    Have a Happy New Year.

  • Mac Mini won't boot past Apple logo and spinning wheel

    Hello,
    I have a Mac mini (late 2009) running 10.8.2. Today, I tried to log into the computer. It accepted my username and password, but then the screen turned gray instead of logging in. I left it like that for about twenty minutes, then gave up on waiting and Ctrl-Command-Power rebooted it. It then wouldn't reboot: it gets to the Apple logo and spinning loading wheel, but won't go past there.
    So I went into single-user mode and was able to access the HD fine. I ran a filesystems check using the recommended syntax (/sbin/fsck -fy, I think). It said that the volume looked okay, and that it had been modified. I took this as a good sign (that it had been repaired) and typed "reboot" to restart the machine. I held Command-Shift-V to perform a Verbose Safe Boot.
    The computer makes no further progress after the following four lines:
    vboxdrv: fAsync=0 offMin0x809 offMax=0x2bc3
    VBoxDrv: version 3.2.12 r68302; IOCtl version 0x140001; IDC version 0x10000; dev major=34
    VBoxFltDrv: version 3.2.12 r68302
    VBoxAdpDrv: version 3.2.12 r68302
    I'm assuming all the instances of "vbox" are in reference to Oracle's VirtualBox VM. I do have VirtualBox installed, but haven't used it in a while (months), so I don't see why it's suddenly causing a problem.
    To clarify, the computer doesn't "hang" after these lines: I can still type text into the terminal. The entire log is being saved to /dev/console, so I could probably grab it from Single-User Mode if necessary.
    Everything else seems to be working properly: even the wl0 drivers are loaded.
    Does anyone have any suggestions about how to fix this, or at least disable VirtualBox so the computer can start?
    Thanks!
    WC

    Cult of Mac post:
    When the Apple Logo appears your Mac has found a valid system disk, and Mac OS X begins loading.
    Apple Logo with Spinning Gear
    Once the spinning gear appears the BSD kernel (Darwin) has assumed command and begins loading device drivers.  Shortly thereafter it transfers command to the almighty (and controversial) launchd process.  Such are the workings of UNIX.
    What this means for us mortals is that when a Mac stalls at the Apple logo or the logo with a spinning gear, it probably has a corrupt Mac OS X installation.  It may also be having trouble accessing an internal or external hardware component, but this is less-likely.
    Rebooting your Mac in Safe Mode can sometimes get things working well-enough that a second, normal reboot then works normally  Hold down the Shift key at startup to boot in Safe Mode.  DiskWarrior is also worth a shot (this is by far my most used disk utility).  If that doesn’t work, an Archive & Install may be needed.
    Read more at http://www.cultofmac.com/50685/how-to-fix-common-mac-startup-problems-macrx/#CGI mG3jeGEBtysX1.99

Maybe you are looking for

  • Problems syncing photos from iPhoto

    I am having a big problem syncing phtos/albums from iPhoto to my iPad2.  for some reason I have an album in iphoto that only wants to sync half the photos, the ones that I actually had to edit a little, all I did was rotate the pictures, but those ar

  • Hyperlink in obiee email reports

    Hi, Well I have a question on hyperlink in obiee dashboards. The requirement is to email obiee Report or dashboard with Hyperlink enabled on date column which opens up PDF from the server for that date. End user will not access obiee analytics at all

  • Adobe Acrobat 11 shutting down

    Adobe Acrobat 11 shuts down when I am cutting and pasting between 2 PDF's from a network drive. Software update and reinstall have already been performed. Windows 7 Enterprise is the OS on a networked PC.

  • Ports stopped working.

    I used to use port 8001 for a lot of things. Recently, the port stopped working. I triple checked all my router settings and port 8001 is still forwarded. I tried other ports. I rebooted. I tried shutting off my firewall. Nothing worked. I really nee

  • Two column telephone directory style report

    Does anyone have an example of a two column telephone directory style report (2.0,2.5,3.0 or 6.0) that they would be willing to share? Thank you. Bill Harman null