New Mac Owner, connection problems...

Hi,
This past month I bought a new Macbook Pro (The 2.5ghz 15" one.) and a iMac (The 20" 2ghz one.) Lately I've been getting connection problems where the connection just randomly drops every 3-10 minutes.
The router is 2 rooms away from the MBP and its in the same room as the iMac. I've only known of one connection problem with the iMac. The MBP drops constantly.
My router is a Linksys WRT54GX2 v2 with the latest firmware. (1.00.08)
Before I had the Mac's I had a Sony Vaio FS920, and it would never drop a connection.
What I've tried so far:
_On the router:_
*Wireless > Advanced Wireless Settings:*
Basic Rate Set #2
Transmission Rate Auto
CTS Protection Mode Disabled
Auto Channel Selection Auto
Beacon Interval 50
DTIM Interval 2
Fragmentation Threshold: 2306
RTS Threshold: 2307
Preamble Type: Long
Network Density: Low
Compression: Disable
Concatenation Auto
*Wireless > Wireless Security:*
Security Mode: WPA/WPA2 Personal
WPA Personal: Enable
WPA 2 Personal: Enable
Encryption Algorithms: TKIP+AES
*Wireless > Basic Wireless:*
Wireless Network Mode: MIXED
Wireless Channel: 6 - 2.437Ghz
Adaptive Channel Expansion: 2 - 2.417Ghz
_On the MBP:_
Airport is on the top of the connection lists
The SSID is on the top of the conenction list
Did the CommandOption+RP twice on reboot for PRAM.
Can anyone help me out? It seems the only thing that is letting me back online every day is the fact that I have to reset the router and the cable modem... There has to be a easier way?
Thanks,
nG.
Message was edited by: Hajimari

I believe the problem you are having with dropped connections is a known issue with Leopard. From what I have read, Apple will be issuing a fix with the 10.5.3 release. Of course, since Apple doesn't publicly discuss future updates, we'll just have to see if this does get fixed.
Keith

Similar Messages

  • I participated in getting the free download of Mountain Lion for new Mac owners. It took me three days to finally get a code to do it and when I tried downloading it, the estimated time was 74 days 17 hours. Now an error occurred. What do I do?

    I participated in getting the free download of Mountain Lion for new Mac owners. It took me three days to finally get a code to do it and when I tried downloading it, the estimated time was 74 days 17 hours. Now an error occurred. What do I do? I am very frustrated and just want the great software to download in a resonalbe time!

    Take your Mac to a location with a fast, relaible Internet connection that will be all yours during the duration of the download.
    If you want to complain, PLEASE call Apple and do so.
    Internet only downloads of OS X is completely stupid, it assumes everyone has reliable Internet everywhere and /or no data caps.

  • I am a new mac owner and want to purchase Office for Mac.  Thought I was told it could be purchased thru the mac store for approx $80 (word, excel, powerpoint).  It is priced at $150 at the mac store.  Any advice?

    I am a new mac owner & want to purchase Office for Mac.  Thought I was told I could get it through the mac store for approx. $80 (word, excel, powerpoint).  However, it looks like the cost is actually $150.  Is there a better deal?

    Here it is from a trusted vendor of Mac goodies for US$100:
    Microsoft Office 2011 Mac: Home/Student Edition. Single User License.
    I also see the Mac version offered about every other week at Staples for about the same price.
    Understand that the 2011 "Home/Student" edition does not come with a mail client.MS dropped Entourage with the 2011 version.
    I am running Office 2008 on a Late 2010  i7 Quad iMac and a Core 2 Duo MBP (both are at OS 10.6.8) and I have no complaints. If you want the Entourage Mail client, you can still get Office 2008 from the vendor I linked.
    I wonder if someone quoted the US$80 price thinking of Apple iWorks.

  • Are there any classes Apple store offers for new mac owners

    Are there any classes Apple store offers for new mac owners, Are there any classes Apple store offers for new mac owners

    Yes.
    One to One is just $99 for a full year and is available only at the time you buy a Mac from the Apple Retail Store or the Apple Online Store
    http://www.apple.com/retail/learn/one-to-one/
    http://www.apple.com/retail/learn/one-to-one/terms.html
    http://store.apple.com/us/browse/campaigns/onetoone

  • New Mac Pro USB Problems!

    It seems the new Mac Pro cannot recognize certain devices.  Such as my Access Virus Ti synthesizer-  users cannot get the Mac to recognize the USB connection from the Virus.  Please help.  I'm losing my mind after 7 hours trying to figure it out and the only indication is that the USB ports on the new mac are possibly incompatible...  Please tell me I can still use my $3000 instrument with my new $4500 mac pro which i just bought SPECIFICALLY to use with this VIrus Ti synthesizer!
    Link to Virus Ti user forums showing other people with the same problemhttp://www.virus.info/forum/index.php/Thread/5522-MacPro-trashcan-and-TI-Anyone- got-it-working/?postID=28004&highlight=trash%2Bcan#post28004

    From what you said it appears that the synthesizer is not compatible. That would be a problem for the synthesizer manufacturer to resolve.

  • Transferring library from old PC to new MAC...problems

    Hi, this is my first post as I am new to mac. I am trying to transfer my itunes library from my PC to my new mac, and I followed the instructions posted here to use your ipod to transfer music from one computer to another. At the very last step it says to connect ipod and it wants to sync it to an empty library on my new computer. If I copied the itunes folder from my old computer to my ipod, and then to my new computer into my Music folder, how to I get that into my itunes library on my new computer?
    Thanks so much for any help to clarify this!
    Tonya

    Click here, follow the instructions, and point iTunes to the location of the library you moved.
    (30668)

  • Hi folks, I have my new mac mini connected to my telly (HDMI) and want to set it up. It didn't start the set up assistant

    Hi folks, I've got a new mac mini and want to start using it. I put it on my HDMI telly and connected it to magic trackpad and wireless keybord, both are working fine. I can see the mac dashboard but I cannot click anything! The pointer moves where I want it to but nothing reacts and the setup assistant didn't start either.
    Any idea what I can do?

    The following article may be of help.
    http://support.apple.com/kb/ht3924
    Oops, I see this article has been referred to already.
    Message was edited by: John Lockwood

  • New Macbook - Airport connection problem

    Hi All, wondering if someone can help.
    I have just bought a new MacBook (yesterday) and have been trying to connect to the wireless network that I currently use with my Powerbook.
    I can connect the new MacBook to the Airport Express to play AirTunes and access other computers on the local network, but cannot access the internet.
    I am able to access the internet from my Powerbook on the same wireless network, and not sure why a brand new mac cannot access the internet via the same connection.
    Thankyou for any help
    MacBook Core 2 Duo   Mac OS X (10.4.8)  

    There have been hundreds of posts on this forum and others regarding the latest batch of MacBooks with Atheros chipsets in the Airport Extreme Cards, which are 802.11n ready cards, currently running in b/g operation only.
    We all are hoping for an Apple firmware/driver update, that will hopefully remedy the woeful inadequacy of connectivity with these cards.
    It's too bad you don't have access to the router, as you could try updating the firmware.
    I originally had quite a lot of difficulty with my new MacBook and connecting to my current network, so I'll list off a couple things that I tried and hopefully one will work for you.
    -Turn off interference robustness if it was on.
    -Install (or reinstall) this update if you have a Core 2 Duo MacBook->http://www.apple.com/support/downloads/airportupdate2006002.html
    -Try and add the network manually in your System Preferences->Network->Airport settings. Choose Preferred Networks, and then the '+' button, add the network in that way. Maybe your MacBook will smarten up after that.
    -Reset PMU and PRAM: Turn off your computer, and take out the battery. Flip over your MacBook, and hold down the power button for 5 full seconds. Restart, and before the startup chime hold down CommandOption+PR at the same time, until your MacBook reboots a second time, then release the keys.
    -Drag com.airport.preferences.plist to the desktop from the root Library/Preferences/SystemConfiguration/ folder and restart, then try to connect to the network. If you are successful, trash the file, as it was re-created on boot. If this fails, you can replace the file from the desktop.
    Hope the above steps can help you in your quest to connect. Please write with what worked or didn't work for you, as there are many visitors in your same boat, unfortunately.

  • New Mac Mini USB problem

    I have a brand new Mac Mini (December, 2011, 10.7.2) as well as an older Mac Mini (circa 2005, 10.6.4).
    I bought a new GearHead USB wireless mouse to go with the new mini.
    The mouse works fine on the old Mini (and also on a Windows PC).
    On the new Mini, the mouse works until the Mini hibernates or powers down. On wake-up, the mouse doesn't work until I unplug and replug the USB transmitter.  This is the case on all USB ports on the Mini, as well as on the keyboard and monitor USB ports. It doesn't matter which port I use or which port I unplug and replug into - I always need to unplug and replug the transmitter to get it to work after power- or hibernate-cycle.
    Note that I have also tried a Logitech USB wireless mouse and an Apple Bluetooth mouse and they both work fine on both the new Mini and the old Mini.
    The problem is only occurs between the Gearhead brand USB mouse and New Mac Mini (10.7.2).
    I assume that the problem is that the mini is powering down the USB port and not refreshing it after power cycle, until I unplug and replug the transmitter. Alternatively, I suppose, the transmitter could be asserting itself early in the boot process before the Mini is awake enough to hear it.  In either case, it seems that the band-aid fix is a command-line to force the OS to refresh the ports, but I can't find any reference to such a command.
    Thank you for any help you can provide.

    Hello,
    I assume that the problem is that the mini is powering down the USB port and not refreshing it after power cycle,
    To me it seems like when the usb is powered down the trnasmitter loses the signal with the mouse, i think your mini is perfectly fine, even though the mouse works fine on the old mini I think its how the transmitter handshakes with the new mouse on the new mac mini. Do you have a new mouse of the same brand that you can test and see if it has the same issue...
    If so then it forsure the transmitter... not the mini... else take your mini in for health check.
    good luck, let me know how u go...

  • New Mac mini audio problem - beeping from audio output

    Hi Apple fans
    Please help me. I recently purchased a new Mac mini from my local store. It's three-and-a-half weeks old as of today.
    It's an i5 2.3 with 8 GB of corsair RAM.
    I like to watch movies and TV on it and have the audio connected to an external amp and speakers via the headphone output.
    After a reboot today I lost the sound through that output. All that I hear through it now is an electronic beeping, six notes, descending in pitch, repeating.
    I have no idea what it is, other than annoying since this happened on a brand new computer. Not looking forward to the idea of losing my mini for a week as Apple figure it out, but it may be all that's left to do.
    Maybe somebody here can help me out - anyone have an idea what's going on? I did an fsck -fy already, and there seems to be nothing wrong, based on that check. For completeness sake, I ran the sound over a USB sound card, and the beeping noise was not there, and sound worked fine. Ditto for the internal speaker - no weird noise there, this seems limited to the headphone out port. I've tried different cables, and even amps, and a set of small speakers without amp. The noise is there when using the headphone jack, and it's absent when using the wee internal speaker or USB-based sound. Please help?
    I captured the sound on a video which I've uploaded. It's kind of jarring, so keep your hand on the volume button.
    http://www.youtube.com/watch?v=mUt8miCYcJQ
    http://www.youtube.com/watch?v=mUt8miCYcJQ
    Thanks much for any input - it would be very much appreciated.
    Pascal

    Hi Pascal,
    Certainly strange, but I have no ideas other than having it looked at by Apple.

  • Help a new Mac owner out with my iPhone

    Yesterday I purchased the new 13.3 Macbook, and so far I'm learning what all the new computer has to offer. I'm a new mac user, and all of this is new to me... heck, I'm just not very savy when it comes to ANY computer.
    I'm at the step where I need to sync my iPhone to iTunes. I plugged in the phone, hit sync, and when it was finished - all my contacts were there, but all of the applications are gone.
    Only the original ones remain, the ones that were there when I purchased the phone.
    Is there a setting I'm missing here?

    In regards to iTunes content, an iPhone can be synced with an iTunes library on a single computer only. When syncing iTunes content with iTunes on another computer, all iTunes content on the iPhone will be erased first.
    You need to transfer your iTunes library from the computer you were syncing iTunes content with for your iPhone to your new Mac. If you live near an Apple Store, the store will help you do this with a new Mac purchase. The same for photos and any other data available on your previous computer that you want/need available on your Mac.

  • HT2518 I am a new Mac owner trying to transfer files from my pc. When I go to migration assistant, and hit "continue, a screen comes up that says "Mig Assistant wants to make changes. Type your password to allow this. What is my "password"? Or how do I ge

    I am trying to transfer files from my old pc to my new mac. When I go to migration assistant, and hit the continue button on the introductory screen, I get a message that says M Asst wants to make changes - type your password to allow this.   What is my password or how do I set one up for this?

    When you set  up your Mac you had to enter a admin password to set up your user account.
    If you did not enter one then try using the  "blank window" as your password. ie Just hit return with nothing entered.
    If that does not work try this reference:
    http://reviews.cnet.com/8301-13727_7-20087723-263/how-to-run-the-password-reset- utility-in-os-x-10.7-lion/?part=rss&tag=feed&subj=MacFixIt

  • Potential new mac owner

    I am looking to get a new computer. Thinking about the new mac mini, mainly for the cost. My question is will this be enough computer for me? Primarily will be used for internet, photos, music and some video editing (standard). Storage wise I'm okay with, my main concern would be the speed. My old "pc" would take forever when viewing/editing pics. BTW, I'll be using it on a Vizio 21-inch display. Thanks in advance for your input.

    Hi there
    The Mac MIni is an excellent choice for what you want to do - I use both Mac and PC and even though my PC on paper is the 'faster' computer (PC is 2.4Ghz Dual Core vs 1.83Ghz Dual Core Mac) I find my Mac Mini is the better performer. A lot of this is down to the superior operating system and the applications you get with the Mac. If my older Mac Mini can cope ok with music creation, video & photo editing I think you'll find the new breed of Mini's will be more than adequate for your needs.
    Also I use a 22" monitor and find that the Mini can cope very well with the higher resolution displays.
    Hope this helps
    Jonty

  • UGH! Help!New Mac owner and I'm about to throw it out the window! Won't stay connected wirelessly to the internet.

    I purchased a MacBook Pro 13":
    Processor  2.8 GHz Intel Core i7
    Memory  4 GB 1333 MHz DDR3
    Graphics  Intel HD Graphics 3000 384 MB
    Software  Mac OS X Lion 10.7.3 (11D50b)
    I have AT&T DSL with the 2wire wireless connected directly to the dsl line.  There is no base computer.  I owned a netbook prior to this and had several people use there pc laptops wirelessly before.  Now I can't seem to get my Mac to stay connected wirelessly.  My iPhone 4, touch and satalite still maintain perfect wireless connection as they did before. I called apple , they said it was my internet, I called AT&T they said it was the Mac.  I have a similar post on AT&T, hopefully someone can help!  This is NOT how I wanted my first Mac experience to go!!!  It is vital I stay connected because I remote in to work constantly and can not be interrupted.  Someone PLEASE help!!

    Recommended settings for Wi-Fi routers and access points
    Troubleshooting Wi-Fi issues
    Potential sources of wireless interference

  • Mac Air connection problems

    So I just got my new MBA yesterday. Wifi connected in the apple store. I get home and it's not working. My iPad has been working no problems. My cousin has a pro and that's been working with no issues. I've  been on the phone with Mac support for 30 mins and their final diagnostic is that my network has been hacked that's why it's not connecting. Is this real?

    Within the Displays preference pane in System Preferences is a choice whther to extend your desktop, or mirror your desktop. Apparently, the current selection is to "extend the desktop".
    Set the preference to "mirror the desktop", so that your internal display shows the same image as your external display.

Maybe you are looking for

  • Problems with importing text messages from PC Suit...

    Problems with importing text messages from PC Suit 7.1.18.0 to my Nokia 5800  I am trying to import a csv file that contains text messages (Note that this file was created using PC Suit 7.1.18.0) to a subfolder that I have created to My Folders but P

  • How to include images/icons for a jar file

    Hi, I need to create a jar file which will contain my application. My source code (.java) files are in "app" folder. I compiled that using javac -d . *.java and one package("appl") was created. I have all icons and images related to my application ar

  • Heartbeat possibilty in JMS receiver channel?

    Hi, Does anyone know if it is possible to define a heartbeat interval in JMS receiver channels. Is there maybe a possibility in the additional JMS paramters fields? We need this to prevent connections being shut down by firewalls due to long inactivi

  • JSpinner in JTable: commit edit

    Hi all, I have a JSpinner in a JTable, with corresponding renderer and editor. All works good, but now I want that when the user changes the value of the spinner this change is immediately committed (and not only when the user goes to another cell in

  • Font recommendations when working with video

    I notice some fonts look jagged & lame when working in FCP/Motion and some look better. Is there a general rule of thumb to follow on what kind of fonts are recommended, and what not? How do I tell if a font is OK to use, or not (other than just tryi