New Mac Pro - need to run using 10.4 operating system

I need to run a UNIX based program (Gaussian) on a new Mac Pro. According to the Gaussian website (http://www.gaussian.com/gbrochures/g03_onmacs.htm) their program is only supported for Intel systems running on 10.4 OS (and not 10.5). Is it possible to purchase a new mac running 10.4, or alternatively how easy is it to downgrade the 10.5 OS to 10.4?
Thank you in advance for your answers.
Rob

Gaussian sure is a blast from the past! In my previous life I did some work with Gaussian 88 and our typical runs lasted about 12 hours each. When the MFLOPS gods were with us, we could do one in about 6 hours on the Cray X-MP down in Austin. It's quite amazing that this can now be done on the computer sitting under my desk!
As far as your question goes, it looks like you will have to wait for Gaussian to build a Leopard compatible version for Intel-based Macs. In the mean time, I have read that it's possible to install SuSe Linux on a Mac Pro on a separate partition. Assuming that your license allows you to use the Linux binary, it might be possible to use it. You would have to reboot to do a Gaussian run, so it's not the most elegant solution, but it's the only way I can see it working.
Good luck with your number crunching!

Similar Messages

I got a new Mac Pro and I am using my 30 inch cinema display. It has been flickering grey sometimes and then will stay grey and I have to reboot... this is very annoying..help. I have reset the pram and that seems to help for a bit but then it starts up

I got a new Mac Pro and I am using my 30 inch cinema display. It has been flickering grey sometimes and then will stay grey and lock up my computer and I have to reboot... this is very annoying..help. I have reset the pram and that seems to help for a bit but then it starts up again...and please don't tell me to check for software updates:)

I got a new Mac Pro and I am using my 30 inch cinema display. It has been flickering grey sometimes and then will stay grey and lock up my computer and I have to reboot... this is very annoying..help. I have reset the pram and that seems to help for a bit but then it starts up again...and please don't tell me to check for software updates:)

I have tried to download version11.1 to my itunes so that I can transfer all my info to my new iphone 5 c i am using an imac operating system 10.6.8 OSX it will not allow me to download this !x

i have tried to download version11.1 to my itunes so that I can transfer all my info to my new iphone 5 c i am using an imac operating system 10.6.8 OSX it will not allow me to download this !

What error message ar eyou getting. Why do you say it will not allow you to download?
Verify you meet all the system requirements:
Mac computer with an Intel Core processor
OS X version 10.6.8 or later
400MB of available disk space
Broadband Internet connection to use the iTunes Store

About to purchase new Mac Pro - Need Advice

I am about to purchase a new mac pro and have some questions
I am planning to use final cut pro as well as Edius on Boot Camp.
I intend to edit footage in HDV from a sony Z1 and also from the new sony - pmw -ex3 which i will be planning to edit in HD and 24p.
1) the default config for the mac pro is dual 2.8.ghz processors, what advantage gain will i get i upgrade to 3.0 or 3.2, is the extra power worth the money? will this give me more real-time editing
How many layers of HD 1920 x 1080 from the sony pmw-ex3, will i be able to edit in FCP 6.0 without any problems? would you advise more ram
2) i prefer to work from RAID 5 drives and keep system drive separate, this is how i have worked on in PC/Windows environment. Can anyone confirm if i can have one JBOD drive for the system and 3 drives configured as a RAID 5 drive?
Will i be able to use a boot to run windows and also be able to use the RAID 5 drive on windows side?
3) Is anyone using the 3ware RAID 5 side car? what is experienece is this compatible on the windows partition from boot camp
4) How will i be able to preview HD footage?
5) Do i need to invest in a better Graphics
Thanks in advance

Hi,
Here are a few answers.
1. The Mac Pro 2.8 GHz model performs so well that it is difficult to justify paying 28% more for 7% of additional processor power in the case of the Mac Pro 3.0 GHz or 56% more for 14% additional processor power with the Mac Pro 3.2 GHz model. You might see a small 5-10% increase in performance when compressing video with the 3.2GHz model but it certainly would not be worth paying 50% more to me. In addition, Amazon has the 2.8 on sale for $2599 after an easy rebate:
http://www.amazon.com/exec/obidos/ASIN/B000VR4F2Q/arizomacinusergr
That is a $200 savings off the retail price.
2. If you want to use boot camp I would NOT recommend the Apple RAID card. Boot camp does not work with this card which leaves you wondering why you bought the card and how to get around this HUGE limitation. Instead, I would recommend the Areca ARC-1221x, HighPoint RR 3522 or the ARC-1680x if you want a SAS card. All of these cards have new firmware available that provide awesome performance and boot capability with the Mac Pro 2008. I would also get a SeriTek/2eEN4 4-bay and 1TB Samsung HDs. This gives a solid, quiet 4-bay enclosure that can support RAID 5 with any of the cards and you can add a second enclosure later if you want to use all eight external ports with RAID 6 (for added redundancy and increased volume size). This leaves the internal bays available for Boot Camp, Mac OS X, backups or mirrors and provides RAID 5/6 capability that can be configured to perform almost twice as fast as the Apple RAID card and provide double the redundancy with RAID 6. Links with more information are found here:
http://firmtek.stores.yahoo.net/sata2een4.html
http://www.newegg.com/Product/Product.aspx?Item=N82E16822152102
http://www.amug.org/amug-web/html/amug/reviews/articles/highpoint/3522/
http://www.amug.org/amug-web/html/amug/reviews/articles/areca/1221x/
http://www.amug.org/amug-web/html/amug/reviews/articles/areca/1680x/
3. The 3Ware RAID 5 card is not a top pick in the Macintosh market. The options outlined above will provide much better performance and RAID 6 capabilities.
4. You can view the the HD footage on the monitor.
5. You may want a better graphics card but I would try the stock card first. I was surprised how well the ATI radeon HD 2600 XT card performs with Apple applications.
Have fun!

Does anyone know if a new Mac Pro needs to come out soon?

Hey everybody..
I'm using mac pro from 2007 and i want to replace it for a new one.
everytime i bought a mac product, 2-3 months after a newer came out (it was like that with my macbook pro, iPhone 1,3,3gs,4s, iPad2).
I guess all i want is to know if apple will ever put out a new mac pro?
is it still apple's flagship?
I don't want to buy mac pro as it is because a lot of new technology is missing, like usb 3, thunderbolt, HDMI ect.
I thing apple didn't came out with new mac pro from 2009.
Please Help,
Niv

There was no new model, it was just a change in default processor from 2.8 to 3.2GHz, that was all, and it is otherwise totally the same, still runs 10.6.8 if needed too.
The need for TB is miniscule on a workstation. There are some attempts to get storage arrays but then you already can add SAS/SATA, and you can install higher end graphic video like GTX 670 if needed. More video processing than any TB - which is a nice product, just more aimed it seems toward notebook users and such.
And there are the constant where is TB threads.
Intel is even reconsidering their Xeon roadmap due to when they can have new models, DDR4 around the corner.
If there is a desire that is needed it is probably SATA 3.1 if anything.

New Mac Pro: What are You using to connect your eSATA external drives to you nMacPro?

Hi,
I have some eSATA external HDs that I would like to use with my 2013 New Mac Pro.
I was just wondering what other have been using to connect their nMPs to eSATA devices and how well it has worked. I have seen a USB3 to eSATA cable from NewEgg.... which seems like a good idea ... if it will work.
Thanks!

LaCie TB HUB has two TB ports which is good for daisy chain. Has two esata ports also. I connect a Voyager bought from OWC to one sata port and that's where my bare 2.5 and 3.5 hard drives reside when I need them. The other sta port has a Pioneer 207 blu ray drive. When I sleep my 2013 Mac Pro I turn off the power to the Voyager and the Pioneer. All work flawlessly.

New Mac Pro & Need to backup e-mails/mailboxes/etc...

Hey all...
Just got a new Mac Pro and I need to know what the sure fire way is to copy over my mail.app information from the older Mac. I know there is a FAQ on the topic but for some reason I remember trying to back-up my mail data (including emails/rss feeds/mailboxes/accounts) and really had some trouble so I'm coming to you for a "sure-fire" way to do this. I have a lot of saved emails and would hate to see them gone.
Please Advise! Thanks!!

+Why not just clone the drive and then you'll lose nothing?+
I'm going from one TB worth of data between two 500GB drives to one 320GB drive. I'm swapping out the 2nd drive as that contains all my Music/iTunes files but the main 500GB drive is staying in the older Mac G5. And besides... I want to reinstall some apps and get a clean/fresh start (no clutter) on the new Mac. My only other concern is my iTunes Playlists and library files... But I guess that is a question for another forum.
Cheers!

I just bought a new MacBook Pro and it came with the old operating system, how do I upgrade it to the latest one without having to purchase it?

Hi,
Im a new Mac user. I currently just bought a new MacBook Pro. The first computer I got apparently had a problem with the flex, so I had to go change it for a new one. The first one had the latest operating system, the second one the store gave me didn't, yet it's still a brand new computer, so I don't see why I should have to pay for the new operating system, which should already come with my brand new computer. So I am trying to contact apple so they may give me permission to download it from the app store for free, due to this inconvenience and first bad experience. The vendor tells me that sometimes new computers may come with old operating systems because they're from an old batch of new computers. Oh and by the way, I'm from Honduras, and bought it at Jetstereo, in Tegucigalpa (the capital). This store is a licensed distributor.
Hope someone can help me,
Ankie Zapata

Go to the Mac App Store main page and click on Support under Quick Links.
(82704)

Transition advices to new Mac Pro needed

hi everyone ... I would like to ask your opinion in how to transition from my old Mac Pro to the new one that will arrive soon.
my main concern is my old habit in using the 4 hard-drive slots of my old MP for so many years now:
disk 1: contains the operating system with basic data
disk 2: contains my main data I use every day for work
disk 3: time-machine backup
disk 4: bootcamp
basically I would like to keep a similar setup but so far I have seen only raid systems available for Thunderbolt 2 storage devices and I don't see the possibility to use a raid system and splitting it up the desired way.
1) in your opinion would it be a good solution to buy 3 external Thunderbolt HDD housings and use my existing HDD's?
2) so far I have seen only Thunderbolt 1 housing's without HDD's. but am I right that 10GB/sec is enough for read/write data transfer-speed?
3) or should I change my old habit and get used to a Raid-system and use Thunderbolt 2? (but what to do with bootcamp and time-machine?)
my second concern is about my 2 displays I use that are connected via DVI:
4) will a "simple" DVI adapter to Mini DisplayPort do the job in connecting my displays or do I need a special adapter?
and finally your advice for all the CD/DVD's:
5) what device would you guys recommend for reading and burning CD/DVD's with the new MP?
looking forward to the new MP but very afraid of all the needed extra devices and cables with the "mess" they will be creating around my work-aera!
anyway a BIG thanks in advance for your tip's and helpful input!

Same issue here. Here's my suggestion:
1. Purchase a Pegasus2 R4 empty RAID from the Apple store. Thunderbolt2. Move your drives there. If you want to keep your same setup, you're done, but then you are losing the advantage of not having the redundancy of RAID, such as RAID5, RAID10, or RAID6.
2. Purchase Apple's minidisplay port to DVI adapters for $99 ea.
3. Lots of options for CD/DVDs. Here's one that was designed for the new MacPro: http://www.numac.co or use the existing ones in your old MacPro, as explained below.
While I wait for my MacPro to arrive, I am using a MBAir 2013, a MacPro 2006, a 30" cinema display, a bluetooth keyboard & trackpad, and a Pegasus2 with four new 4TB drives (Seagate NAS) in a RAID6 yielding 8TB of storage with dual redundancy (two drives can fail out of 4). The old MacPro is connected via wifi file/display/CD&DVD sharing. The MBAir is connected to the Pegasus2 which also is connected to the cinema display. The MB Air's lid is closed and accessed with Apple's bluetooth keyboard and trackpad. Not only do I have 8TB of new storage, but I can access all the drives in the old MacPro. The two CD/DVD drives on the MacPro remain available, if needed. I will get rid of the old MacPro once the new one arrives and replace the MB Air with the new MacPro, so I will need to buy an external CD/DVD drive. 8TB of storage is enough.

Buying a new Mac Pro, need help with Screen

Hello everyone, Im getting a Mac Pro, and I need a good lcd monitor to go with it. At the same time I would like to be able to have a LCD screen in my room to watch tv. Is it possible to watch tv with the Apple displays, any other displays or should I buy a LCD TV that has capabilities to be connected to a computer. I read a post that suggested a Dell screen to somebody for the purpose of watching tv.
Please any advice would be appreciated.
Gonzo

Elgato <http://www.elgato.com> lets you watch a record TV programs on the Mac's screen.
There are some non-Apple monitors with video, as well as DVI inputs. Some even contain TV tuners and speakers.
Some TVs can be used as computer monitors but there are potential problems:
Low resolution
Overscan (menu bar and dock off the screen)
Computer display not filling screen
Non-square pixels
Interlacing

Using a 30" Cinema Display with new Mac Pro

Hello Everyone:
I just purchased, and waiting to arrive a new 2014 8 core Mac Pro which is an upgrade to my 2009 quad core Mac Pro. I currently use a 30 inch Apple Cinema display which has the DVI connection. I was thinking that I would use a DVI to HDMI adapter and plug the 30" into the HDMI port on the new Mac Pro. I have since heard that people have been having issues with this older monitor getting it to work properly with the new mac pro. some have suggested buy the $99 mini display port to DVI adapter and using that, but I don't believe there is a mini display port on the new mac pro.
I have considered buying a new thunderbolt display because I am assuming that it will have a much better image quality than the older 30 in display but I hate the fact that it's a 27" and I would be giving up the 3" in size. I do a lot of video and audio recording editing and love the extra screen real-estate. Can anyone confirm a couple of things for me?
1. Will the 30 inch display work with a new mac pro and can I use the DVI to HDMI adapter?
2. Does the new Thunderbolt display have a much better image quality than the 30 in display and because its newer, will look that much better with the mach pro?
Thank you in advance.

1. Will the 30 inch display work with a new Mac Pro?
Yes.
Can I use the DVI to HDMI adapter?
Not if you want full resolution. You need a Mini DisplayPort to dual-link DVI adapter
<http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter>
It plugs into a Thunderbolt port (and USB port) on the computer.
2. Does the new Thunderbolt display have a much better image quality than the 30 in display and because its newer, will look that much better with the Mac Pro?
No, it has more pixels (in the vertical direction), but they are spaced a bit more apart, so you don't want to be as close to the display.

Two questions about my new Mac Pro

Just got my new Mac Pro up and running and have two questions (issues)
First, I had to buy the DVI to ADC Display adapter to hook up my Cinema Display but now I can't turn the computer on from the monitor like I use to. Is that right? It's no big deal to have to turn it on at the computer itself, just wondering if anybody else is having this happen.
Also, the audio out at the back of the computer doesn't work. I've tried plugging in my speaker as well as my headset and nothing. If I plug either of those into the headset jack in the front of the computer all is well. Any thoughts?
Otherwise, I sure do love my Mac Pro!
Thanks.
jamie

I had to buy the DVI to ADC Display adapter to hook up my Cinema Display but now I can't turn the computer on from the monitor like I use to. Is that right?
ADC has pins for power control and the power light. DVI does not have these signals so the display's power button cannot turn on the computer when used with a DVI to ADC adapter.

Premiere Pro CC and the New Mac Pro (2014)

I'm expecting delivery soon of a new Mac Pro, nicely loaded, which I purchased mainly because of all the work I do with video. Yet, I read in a review that Adobe Premiere Pro isn't optimized to take advantage of the new Mac Pro, won't run faster, and I'm better off using Apple's Final Cut.
1. Is this true?; and
2. If so, will Premiere Pro be updated any time soon to run best on a 2014 Mac Pro?
My new Mac Pro will have the following configuration:
3.5GHz 6-core with 12MB of L3 cache
32GB (4x8GB) of 1866MHz DDR3 ECC
1TB PCIe-based flash storage
Dual AMD FirePro D700 GPUs with 6GB of GDDR5 VRAM each

My main problem is that when i export using gpu open gl it crashes hard boot the mac pro. A 3 min timeline with 4k footage n a bunch of color grading. I get lucky if the timeline is shorter. But i think it is a gpu issue n my mac must be fixed. Currently under apple tech support. N my case is unique. No one has had the same issue and that makes it harder for me to figure the isse and to apple figure the issue.
If i export using software only mercury then the export goes smoothe no mattrr how long. But that defeata the point of owning a mac pro with 2 GPUs
Enviado desde mi iPhone
El 29/03/2014, a las 01:51 p.m., BanksMeador <[email protected]> escribió:
Re: Premiere Pro CC and the New Mac Pro (2014)
created by BanksMeador in Premiere Pro - View the full discussion
I have had my 12 core 2014 Mac Pro for a couple of weeks now, and I'm not very impressed with Premiere CC performance with 4K R3D on a 1920 x 1080 timeline.
I understand that there may be an update soon that will take adantage of the CPU's and GPU's when it comes to the complex task of de-bayering the R3D footage, but it's just not there now.
I get similar playback performance to what I experienced on my 09 Mac Pro tower.
Any insights on getting better playback performance in this scenario would be greatly appreciated.
Thanks!
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6253414#6253414
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6253414#6253414
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6253414#6253414. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Pro at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Suggestion for Apple: MacBooks as terminals for the new Mac Pro

Suggesting Apple to enable using MacBooks as terminals for the new Mac Pro if connecting through the thunderbolt.
I am planning to get a new Mac Pro this month and use it as a 'portable' workstation since it weighs only 5kg.
I am working on scienctific research which requires travels quite often.
I want to have a workstation with me when I'm off-site so that I can work without worrying about the network connection.
It would be great if I can use Macbook Air as a display, keyboard and touchpad for the Mac Pro.
I will be fully geared by taking a Mac Pro and a MacBook Air with me where ever I travel.

I don't know much about Thunderbold connections.
Especially how does it combine PICe and DisplayPort signal together.
I would like the MacBook serve as an external screen and an external PCIe video card to the Mac Pro, together with its touchpad and keyboard connected to the Mac Pro as an external USB keyboard and touchpad.
In this case, one may not even boot into the OS on the MacBook side, just need proper drivers in the Mac Pro side for the 'external PCIe video card', keyboard and touchpad.

AMD Crossfire, Boot Camp, and the new Mac Pro Issue

Hello, all.
I have a new Mac Pro (Late 2013) with 6 cores, 32 GB RAM, and dual D700 AMD graphics cards. I'm using an older 30 inch Apple Cinema Display (with the dual link DVI adapter). I've successfully installed Windows 8.1 under Boot Camp. Here's my problem...
I understand that for the new Mac Pro under Boot Camp enables AMD CrossfireX by default from multiple sources online. However, it's disabled on mine, and every time I try to enable it (and hit "Apply" in the AMD Control Center), it disables again.
Is Crossfire only available for use with a Thunderbolt Display attached? Could that be the problem? Or is the AMD Control Panel lying to me?
Now, games in Windows are still running well... But I'd like to take full advantage of the dual graphics cards in the new Mac Pro with Crossfire. Any help is greatly appreciated, thanks!

Fixed it!
So, not only would Crossfire not enable under Windows 8.1 on my Mac Pro in Boot Camp... But Windows started crashing massively. I was about to wipe Boot Camp entirely and try a clean install (even though the only three things I'd installed were Windows itself using Apple's exact instructions, Steam, and Skyrim), but decided in a last ditch effort to try disconnecting and reconnecting peripherals.
Turns out the culprit was my Belkin Thunderbolt Express Dock.
Disconnecting the Belkin Thunderbolt dock not only stopped Windows from crashing, but now I can enable Crossfire, as well!
Now, this is especially strange since I have read elsewhere that people have no problems using the Belkin dock under Boot Camp with other Macs... This issue is probably isolated to using it in Boot Camp with the new Mac Pro. But disconnecting the dock from my Mac Pro has solved not just one but all of my Boot Camp issues. (Of course, using the Belkin dock under OSX on my Mac Pro is no problem.)
Long story short, if you have a new Mac Pro and plan on using Windows 8.1 under Boot Camp, don't have the Belkin Thunderbolt Express Dock attached.
I'm going to contact Belkin and tell them what I've discovered.
Hope that helps y'all.

New Mac Pro - need to run using 10.4 operating system

Similar Messages

Maybe you are looking for