New Mac Pro / Premiere Pro CC / Open CL - Known issue??

Hi all
I've been using Premiere Pro CC on a new Mac Pro since it was delivered in January. After some initial teething issues and system crashes everything was running VERY nicely until the last update (build 33) but since then I have been encountering all kinds of issues.
PP is now constantly freezing and crashing not only the software itself but the entire system requiring a reboot. Whenever I need to render I get all kinds of weird and wonderful glitches in the images and I've had to turn off GPU accel through Open CL just to get the system workable again.
So my question - are these known issues with build 33 or is something else going on??
Another issue unrelated to Open CL (i think) is that XML import / export now appears to be bugged to the point of being unusable. Very very frustrating!

Hi simonspear,
Please check the forum discussion which states the same issue. Hope it helps.
Render & Export Glitching
Regards,
Vinay

Similar Messages

The project was saved in a newer version of Premiere Pro and cannot be opened in this version

I edited a project on CC on one computer and saved it on my external. My friend took the same project to edit it on her computer under her own name and licence. Both of us recently upgraded to CC. But the same project that worked a few hours back on Premiere Pro CC, does not work now also on Premiere Pro CC and I received a message saying: The project was saved in a newer version of premiere pro and cannot be opened in this version." Can you please help us.?
Message was edited by: Kevin Monahan
Reason: Your title was too long.

Hi alexxxkid,
You should be able to import the xml into an earlier version.
Backward compatibility has never been there with Premiere and it is always recommended not to update in the middle of a project.
As far as the crash is concerned, please tell me more about it so that i can help you to the best of my knowledge.
Thanks,
Rameez

"The project was saved in a newer version of premiere pro and cannot be opened in this version." - Except it wasn't!

Last night I saved a project I've been working on for a couple of days. It's been fine all along. Today, when I went to open it, it's no longer listed in the recently opened files on startup and i get this message:
"The project was saved in a newer version of premiere pro and cannot be opened in this version."
Except it wasn't! I use Premiere CC and it's been fine all along. I can no longer open it at all...
Any thoughts? Very frustrating!

One more item. In using PP CC2014 for the first time with this project, I have run into multiple issues making this project very frustrating. When adding a sequence to the master sequence, I have to render the audio each time in order to see all of the audio waves. You have to keep doing this over and over, even though you've already rendered a sequence already.
I am getting error messages when rendering the project saying there are issues compiling the movie. Getting same type error message if I try to export. I narrowed it down to two sequences keeping the program from rendering without the error messages. They each had a tiff file. I deleted them and they rendered. Not sure what this issue was with these particular files since I have other tiff files in the project. Once the rendering of all sequences was done, all the individual sequences were closed and the master was the only one open. I didn't close them. So now to edit any of the sequences I have to go back and open them.
The only thing this project has in it are titles created in PP, a few graphics, mostly tiff tiles and some jpeg and the dissolve effect. That's it. Seems like they should have done more with this version before putting it out there. Maybe that's why there are two separate applications for PP? Who knows. I will be uninstalling PP CC2014 when this project is complete.

F9 or file-new-title freezes premiere pro v2.0

f9 or file-new-title freezes premiere pro v2.0. So I have installed it new on a dell precision 670 xeon 3.6ghz, 3 gig ram, 500gighd. I formatted the hd installed wxpsp3, installed adobe premiere pro v2.o and everything was working fine. One week later the user can not use f9 or hit new title without freezing the program and hitting esc. to get out of trying to create title to use ppro. I have ran repair and it does not work. No new updates have been inistalled. I have top uninstall and install fresh each time. Help please I do not use this I just install over and over and over.

The freeware, FontFrenzy, will help detect corrupt fonts, and can repair some. I use Extensis Font Doctor, not freeware, and it does a good job.
By chance, do you have SunMicro System's Open Office? If so, uninstall the Deja Vu font, and try again. It, and some others, just do not play well with Titler, even when most other Adobe programs have zero issues.
Good luck,
Hunt

New mac and logic pro 9

Last week my old G5 died and I,m looking at getting a new mac and logic pro 9.
My G5 had logic pro 7 and 8 installed on it. I was wondering do I need to install
those back on my new mac so I can upgrade to logic 9 or could I just install logic 9 on my new computer. I have the key that came with logic 7 and that's what I used to install logic 8 with. I really don't want to put those on my new computer. Also will logic 9 load my logic 8 songs.
Thanks for your help,
Chuck Floyd

Chuck Floyd1 wrote:
Last week my old G5 died and I,m looking at getting a new mac and logic pro 9.
My G5 had logic pro 7 and 8 installed on it. I was wondering do I need to install those back on my new mac so I can upgrade to logic 9
No.
or could I just install logic 9 on my new computer.
Yes.
I have the key that came with logic 7 and that's what I used to install logic 8 with. I really don't want to put those on my new computer.
Why not? You could install just the apps, they do not take much space and you know for sure you can always open your old projects.
Also will logic 9 load my logic 8 songs.
In principle, yes. But it can vary, depending on what you use(d) in those L8 projects (environment alterations, 3rd party plugins etc etc). If they won't load, use L8. I'ld advise you to install both L7 and L8, just in case. Just skip the samplecontent etc on both installs, do only the apps themselves.
regards, Erik.

I have a new IMAC with a Maverick platform (I can update to Yosemite). I did all graphics on a G5 Power PC (very old), in Freehand (very old)... How can I open old Freehand files on this new Mac? Can I still open and work in Freehand on this new Mac?

I have a new IMAC with a Maverick platform (I can update to Yosemite). I did all graphics on a G5 Power PC (very old), in Freehand (very old)...
How can I open old Freehand files on this new Mac?
Can I still open and work in Freehand on this new Mac?

Let me see if I've gotten this right! You want to remove an account from BOTH machines? Do this for your new machine first, then for the other.
Click the Apple logo on the top left of the screen, System Preferences, Users and Groups (under Systems), unlock the lock in the window if its locked (you need to know the password), select the user that you wish to remove, and click the - sign next to the + sign for Login options. A window will pop up with some options. Select Delete this user and securely, and click 'Delete user'.
After this, do an update from the App Store.
Thats all there is to it.
For the other machine repeat the process except for one thing. Before you delete the user in this case YOU, you will have to give Administrator priviledges to your son bu checking the box 'Allow user to administer this computer'.
Do NOT do anything from Finder ... if you dont know how to fix the consequences of the problems caused.
There is no need to unauthorize your iTunes account on your new machine. Do it on the old machine though.

Tried to download adobe flash several times on our new Mac and it will not open in any internet sites that we have tried.

Tried to download adobe flash several times on our new Mac and it will not open in any internet sites that we have tried.

test to see if it's installed, Flash Player Help

When I try to open a project it says that it has been saved with a newer version of premiere pro when I have the latest one...

this project was given to me by my work partner who works on adobe premiere pro cc but on a pc, i'm on a mac, is that the issue ?
thanks alot

Mac or PC are not the issue.
There is Premiere CC and the newer Premiere CC14.
You cannot open CC14 in CC14 (8.0) and CC.

"The project was saved in a newer version of premiere pro and cannot be opened in this version." How can I keep the projects interchangeable?

I recently updated my Premiere Pro CC at home to 2014.1 and now can't open my projects at school where they are using Premiere Pro CC 2014. (which was up to date last week) Since I don't know how long it will take for them to update all of the computers, (based on past experience) How can I make my project compatible between these 2014 versions?
I've tried to export the project as a Final Cut XML file, but didn't have luck with that.

Hi Benjamino5,
There is no backward compatibility in Premiere Pro. It's not ever been a feature. The only way backward is by using XML but it sounds like you had problems with that. Please let us know your specific issue here: http://adobe.ly/ReportBug
I was speaking about forward compatibility. A number of people have had problems updating the project file with this version. While it should not cause too many issues, it is a general rule of thumb to never update your project file to a new version part way through a project.
It's rather unfortunate that this formerly hardcore stance (to not update project files until done) has been forgotten or is simply not known to many editors, both new and old. Updating a project file should never be done unless absolutely necessary. As a former instructor, I would make sure that all my students were aware of this potential project killing issue.
Backward compatibility is a long standing feature request. Make that in the same place as the bug report. Hope that helps.
Thanks,
Kevin

New update for Premiere Pro? 6.0.1

http://blogs.adobe.com/premiereprotraining/2012/05/premiere-pro-cs6-6-0-1-update-bug-fixes -and-improved-opencl-performance.html
Is this new or have peolpe been using it?

New since today.

BUG: Inputting decimal places into new duration preferences (Premiere Pro 2014.2)

So, I checked the release notes for the newest version of Premiere Pro CC (2014.2). I was happy to see the ability to switch between frames and seconds when choosing the default durations of transitions and still images.
Immediately found a bug. Decimal places don't work correctly after switching units.
Open Preferences.
Switch Video Transition Default Duration units from the default Frames to Seconds. Try to insert a decimal place using the keyboard. It doesn't work.
Hit OK to close the Preferences, with Video Transition Default Duration now set to seconds
Open preferences again and change the units back to frames. Now try to input decimal places. No matter where the text cursor is, the decimals just get added to the end of the form field.
This seems to affect all three form fields (not just Video Transition, but Audio and Still Frame as well).
Really weird bug, and I'm not sure how you guys at Adobe missed this one...
Anyone else having this bug? I'm on Windows 7.
If so, can someone please file an official bug report? I'm at work and low on time, but I felt like I needed to bring this up to make sure I'm not the only one in this boat.

I've reproed this issue and logged a bug report.
A workaround is to toggle the Unit setting, click Okay to close Preferences, then reopen Preferences and adjust the Value. Sorry for the inconvenience.
I urge you to submit your own bug report (Adobe - Feature Request/Bug Report Form). The more customers who report an issue, the higher the odds that a fix will make it into the next release...

This file was saved in a newer version of premiere pro

I have students in our iMac video lab encountering this error on a number of workstations. But it's not all students. Some of the students have Macs at home others have PCs. The students have CC2014 at home and our video lab has CC2014 as well. The software is up to date in the lab.
Additionally I have uninstalled and reinstalled the software, but the problem still remains.

Weird things happen at times, but it definitely sounds like a case where one system is up to date and the other is not. Double check your version # in the "About Premiere Pro" box. The current version of PrPro CC is 2014.2 (aka. 8.2.) build 065. The current version of CS6 is 6.0.5 (001 (MC: 264587)).

New mac mini, logic pro x...best way to set up?

Hi folks. Ive a new mac mini i5 and i want to download logic pro x. Id love any advice. For example, i presume that loading the program onto the main hardrive and content for samples onto another is the ususal way to increase speed and cpu but how do i go about this with the mini? anyway, any advice from mini owners with lpx would be appreciated. Cheers.

johnwaxie wrote:
Hi folks. Ive a new mac mini i5 and i want to download logic pro x. Id love any advice. For example, i presume that loading the program onto the main hardrive
I presume you are downloading Logic Pro X from the App Store in which case there is no option of where to install the application. It will be installed in the /Applications folder on the boot drive.
johnwaxie wrote:
and content for samples onto another is the ususal way to increase speed and cpu
Assuming you have an external hard drive with a high speed (Firewire 800, USB 3SS, or Thunderbolt) interface and a 7200 rpm HD, you might see some I/O speed improvement due to a lack of conflict on the bus, but if you new Mac mini has a Fusion drive, which ends up being almost as fast as an SSD (Solid State Drive), and any speed improvement from moving the data to an external drive would be probably be marginal at best. If you want to increase CPU speed then get the upgrade Mac mini with the 2.6GHz quad core i7 processor and no matter what processor you get, max out the RAM memory at 16GB. Apple is awfully proud of its RAM so you might consider getting the additional RAM from Other World Computing or Crucial and save $100 or so.

Investing in new laptop-Will Premiere Pro CS6 run OK?

I'm planning to buy a computer with the following specs:
NVIDIA GeForce GT745, Core i7-4700MQ, 8GB RAM, 1000GB HDD/SSD
Will this PC meet the performance requirements for Adobe Premiere Pro CS6?

I believe that the 1TB laptop drives are all 5400 rpm drives and therefore they are not really suitable for any video editing. Now if you do not mind upgrading yourself or having a real computer store do it for you you could possibly get by, but really you need an absolute minimum of two 7200 rpm drives or SSD's to satisfactory be able to do any video editing. Was this by any chance the .Lenovo IdeaPad Z710 Laptop - 59400478? It does not have a second drive bay, you have to remove the DVD drive to install a second hard drive or SSD.
See this forum entry
Message was edited by: Bill Gehrke

Final Cut Pro - Premiere Pro 1.5

Hi there!
i working in TV and we got new MAC Pro with Final Cut and Captured with final cut pro then these files taked in post production to premiere pro on PC workstation with Matrox RTX-100 these captured files in Final Cut in PC workstation are without original tape timecode when importing in Premiere Pro 1.5 - how to solve this problem? there are any issues? - yes you say - bay another MAC for post production man, but this is not the way to go!
Please help me, maybe there are some codec, DV format or any other way to go and capture in Final Cut ond move these DV files in Premiere with Tape Timecodes?
Thanks! and please help if somebody cnow how to help
(sorry for my bad English)
Message was edited by: cosmo-lv

Ou, if that will be that simple, huge of tapes - this is for daily news and - i capture tapes, then later come to work post manager on that PC based workstation, this is time question, we need work fast and this is problem for capturing again
before i had PC Old Matrox DigiSuite IBM PC - then all timecodes be in place and no problems, but since we got Macintosh , we had lot of Problems - more problems as we can imagine bofore
why this is so dificult?
Message was edited by: cosmo-lv

New Mac Pro / Premiere Pro CC / Open CL - Known issue??

Similar Messages

Maybe you are looking for