New Mac Pro: Will I need to toss out my esata RAID systems?

Can't wait to buy the new MacPro. However, I have 3 RAID systems, hooked up to ESATA RAID controllers. Will I be able to use these with the new mac pro? is there like a thunderbolt-estata raid converter?

There are several ThunderBolt to eSATA boxes avaiable:
http://eshop.macsales.com/item/Lacie/9000186/
This converts to ExpressCard34, then you add an eSATA expresscard to it:
http://eshop.macsales.com/item/Sonnet%20Technologies/ECHOPROE34/
http://eshop.macsales.com/item/Sonnet%20Technologies/SATAIIE1PE34/
This one is not quite available, but some online resellers are taking orders:
http://www.sonnettech.com/product/echo15thunderboltdock.html

Similar Messages

I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

I tightened all HD screws and it didn't help. With the machine running and side of the case off, I physically stopped both the video card fan and the front case fan with my finger for a couple seconds and the noise continued. I also took all hard drives out one by one and rebooted each time. Again, the noise continued until I took out the Mac HD in Bay 1, rebooted, and I had a very quiet, silent machine. The issue is the hard drive in bay 1 that shipped with the computer, it's without a doubt causing the hum/woosh sound. I still need to know if I can safely swap the Mac HD from bay 1 to bay 4 without any issues to the operating system. I would like to try that to see if it dampens the noise but I also want to make sure this swap won't screw up my machine at all.

My new Mac Pro will not recognize my old Canon video camera

My new Mac Pro will not recognize my old Canon video camera

We've used the 400 to 800 firewire cables with limited success in the past...dropped frames was the main problem. Only used them until the Sonnet FireWire PCIe Card came in to allow a 400 firewire.

New mac pro upgrade advice needed or keep the old clunker

I have a 2008 mac pro with only 8gb ram
I am use the computer for FCP and Logic as well
as photo editing. It is not my livelihood I am just a serious hobbiest.
My option is to go with a new Mac Pro probably 8 core with 1 TB
I would have to get an enclosure for my 4 thunderbolt internal drives.
I also have 2 firewire 800 2T external drives.
My monitor is a 30 inch cinema display
so an 8 core with 64gb plus 4k monitor and upped graphics card is $11,600 add my buisness discount i am probably
looking at around $11,000
My other option is to keep the clunker add a 1TB SSD PCIe card form owc and add 8gb ram this will
cost me $1,400. I am really only throwing away the $200 for increasing the ram as
the PCIe ssd drive can be salveged and used in the new mac pro if I bought an pcie/ thunderbolt enclosure.
Tha advantage of going this route is I could use the clunker for another year allowing time
for the kinks in the new mac pro to be ironed out as well as the advantage of faster chips in next years model.
The other issue I have is a use a Universal Audio PCI card with 4 sharc processors to run specific plugins that need that
card in logic. That card will no be compatible with the new Mac pro and the replacement cards are over $1000 that are compatibe
Just looking for some advice do you think the SSD PCI card and ram will keep me happy with the performance to hold off upgrading for
a year or shoul I just put the clumker out of its misery?

radman wrote:
Just looking for some advice do you think the SSD PCI card and ram will keep me happy with the performance to hold off upgrading for
a year or shoul I just put the clumker out of its misery?
On this page Apple compares the 2012 Mac Pro (12-core) to a 2013 Mac Pro (12-core). The new Mac Pro performs about 3x faster at rendering. You didn't say how many cores your Mac Pro has but you could expect about a 4-5x faster performance increase.
I would have some questions for you:
How much time do you spend waiting on your current Mac Pro?
How much money are you willing to spend for a 4-5x increase?
I have a 2010 Mac Pro with a 960 GB OWC Mercury Accelsior E2 PCIe SSD, program launches and computer restarts are much faster. Compressing video takes the same amount of time as it did when I booted from a hard drive. I can't read or type email any faster, iTunes plays music just as fast as it always has with a hard drive.
I would use Activity Monitor to monitor your computer's memory use while you work with FCP and Logic to see if you are maxing out your memory then adding more may be the way to go.
I use my Mac Pro for recording over-the-air TV and compressing that video into an Apple TV usable format. I've found that having a dedicated drive for capture works well. Also, when I compress the video my capture drive becomes a dedicated source drive for Compressor and I write the output file to a separate dedicated drive. This ensures I maximize data flow and keep all my cores nearly fully utilized. I tend to do the processor intensive tasks (compressing video which can take hours) at the end of the day when I know I won't be using the computer (or only doing light work on it such as email or web surfing).

Just bought new Mac Pro, will I be able to install my PPC apps?

Hello,
Just ordered a new Mac Pro Dual 2.0 online today. After reading a lot of posts on here, I'm wondering if I made the right decision and should have bought a Dual G5 Quad instead. Will my PPC apps install at all on the new Mac and will they run? I do a lot of audio work and I'm already noticing that there is a pretty long wait with the UB updates. Not really looking forward toward the hassle of updating everything all over again...Do you think the MP was a better investment than a refurbished G5 Quad? I assume I'll be able to install Logic Pro from my 7.0 DVD's and then upgrade to 7.2 or does it not work this way? I'm hoping that the upgrade to Logic 7.2 is not a paid upgrade. Since I just bought online yesterday, do you think they'd let me cancel before shipping?
Shane

PPC applications will run on Intel Macs through the Rosetta emulator. You will see a speed hit, however. Rosetta runs about 30 percent slower than native apps due to the emulation hit. The exception will be Java applications. Java applications that use the JNI libraries need to be converted to universal binaries in order to run on an Intel Mac. The other exception will be applications that require plug-ins and/or startupitems or install special frameworks. These will need to be universal binaries or they simply won't work on an Intel Mac.
If possible you will want to upgrade your PPC apps to their universal binary versions if such versions are available.
A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3 or G4 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior (does not work), TechTool Pro (pre-4.5.1 versions do not work), SuperDuper (newest release works), and Drive Genius (untested) may not work properly on Intel-Macs. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Written by Kappy with additional contributions from a brody.

HT4413 To transfer everything from my Mac mini to a new Mac Pro do I need two displays? Once I have confirmed my mini is open while pressing T can I then disconnect my Cinema Display from the mini and connect it to the Pro to continue the transfer?

Can I set up my Mac mini to transfer its contents to a new Mac Pro and then disconnect my Cinema Display and use it connected to the Pro to complete the transfer? Do I actually need two displays to manage the transfer?

It helps have 2 monitors, so that you can monitor data XFER, just my experience. If nothing else it allows you keep am eye on what is going on.

Looking to run autodesk inventor on a new mac pro* will it work?

Looking to run autodesk inventor on a new mac pro* using boot camp and windows.
Will it work or am I waiting my time?

As an alternative, though not an ideal FCS box, the Intel iMacs should be fine, and should fit into the same budget range as the MacBooks.
For serious FCP work, I wouldn't recommend an iMac, but for the purposes you've outlined, it should be acceptable, for the most part.
EDIT: My comment above is in reply to your comment about school purchases, not your original post about carrying around two laptops.

Prepare the drool cloths! New Mac Pro will make Aperture SCREEEAAAAMMMM!!!

Shipping TODAY
New Mac Pro
1.6 -2.1 faster than current PPC Quad
2.6 Ghz dual DuoCore
256 MB ram
Superdrive
$2499
All quad, up to 3ghz
Up to 16 GB memory
Up to 2 TB SATA internal storage with FOUR internal drive bays
4 PCI Express slots
Graphics up to radeon x1900 or FX4500
HOLY SMOKES!!!

Looks like a nice machine.
Bit dissapointed with the graphics options though - in the PC world you can get dual on one card Nvidia 7950GX2 cards which would absolutely destroy anything you can get for this machine.
I wonder if you could just buy a Radeon 1900XTX card and pop it in, if it would use the same drivers as the XT card.
On the memory front does anyone know if it NEEDS ECC RAM? ECC ram is hideously expensive and I'd really want 4gb for aperture.
CPU looks great and is actually very well priced, the Xeon's are very expensive chips.
notice also the tech specs for the screens have increased, and prices dropped.

Looking to buy a new mac pro will there be a i7 version?

I have an iMac 24" and looking to get a mac Pro as my needs have changed.
I have compared an iMac and 2.66GHz Quad-Core Intel Xeon "Nehalem" processor ( two (friends) side by side and I have to say there is nothing in it, my initial thoughts were the Imac has better graphics and seems faster using Photoshop and final cut.
Does anyone know if they will make a i7 version (non xeon) and if the price will drop as the Mac pro seems to be so very expensive since the introduction of the i7 Imac in the region of £800 I'd say.

http://store.apple.com/us/browse/home/specialdeals/mac/mac_pro
No, Mac Pro = Xeon, and there is quad 3.3GHz BTO $1200 extra.
You were looking at 2009 Mac Pro? sounds like 2006-7 model possibly.
Whether you need more hard drives and memory then an iMac Core i5 is up to you.
http://www.amug.org/amug-web/html/amug/reviews/articles/intel/macpro-2009/
http://www.barefeats.com/imi7.html

Has Apple provided any information about when a new Mac Pro will debut?

Has apple provided and indication of when a new Mac Pro might debut?

Thank you. The A in Apple is for ambiguity.

New Mac Pro: What are You using to connect your eSATA external drives to you nMacPro?

Hi,
I have some eSATA external HDs that I would like to use with my 2013 New Mac Pro.
I was just wondering what other have been using to connect their nMPs to eSATA devices and how well it has worked. I have seen a USB3 to eSATA cable from NewEgg.... which seems like a good idea ... if it will work.
Thanks!

LaCie TB HUB has two TB ports which is good for daisy chain. Has two esata ports also. I connect a Voyager bought from OWC to one sata port and that's where my bare 2.5 and 3.5 hard drives reside when I need them. The other sta port has a Pioneer 207 blu ray drive. When I sleep my 2013 Mac Pro I turn off the power to the Voyager and the Pioneer. All work flawlessly.

When the new Mac Pro's with E5 Processor coming out? Please help

Hello People.
I am in desperate situation at the moment. I had a late 2008 Mac pro which i recently sold and bought the new 8core 2.4ghz Mac pro from best buy about a week ago. As soon as i bought it, i found out that Apple is coming out with a new Mac Pro loaded with the new xeon E5 processor. My question is that when Apple is coming out with the computer since the rumor said its coming out in the beginning of March. I paid $3400 for the new computer and i really want the one which has all the new stuff in it. I have about 2 weeks left to return the computer to Best Buy and at the moment don't know what do.
Does anyone has answer to my question?
Thanks

Seeing no one, not WSJ or ComputerWorld or CNBC, just speculation. For all we know it will be another mid-Summer too..
I do think the 2.4 8-core is a ''weak' system choice. More apps and more productive to go with a higher clocked 6-core or something.
I'd direct attention to www.macperformanceguide.com that argues, if you need it don't postpone for what might be.
http://macperformanceguide.com/blog/2012/20120319_1-MacProNowOrWait.html
Even if there was an annoucement it often takes time to sort out, ship, etc.

2013 new Mac Pro will not boot up from and external hard drive

New 2013 MAC PRO running Yosemite will not not see a bootable external hard drive when starting up using option key? Same External hard drive will boot up on 2013 Mac Book Pro running Yosemite.

Reading between tea leaves sometimes leaves some things to imagination.
You used SuperDuper latest version that was recently upgraded for Yosemite on a laptop running 10.10 (or even 10.9.3+) that is in a X-brand USB3 drive enclosure, not bus powered btw, moved it to the nMP and plugged it into a direct port, not going through a hub (monitors have hubs of course and there is only one real bus+controller on the nMP that ALL USB3 travels through.
Thunderbolt and self-powered would be nice but they cost a bit more.
I have read where Carbon Copy Cloner (now v 4.x) worked where others failed. I use to use both but have used CCC since its inception and use back in 10.2.2 forward along with SD! for a few years based on comments here.
Drivers missing? someone compared system extensions and found the ones needed for say the nMP are not there? how about running a 10.10.1 combo update and see if that changes - we USE to be able to apply updates to a system that we were not booted from, very handy (could update a sparse disk image of a system that way, one created with CCC).
WD Passports seem popular with laptop users, but they come here to this forum complaining that it doesn't work, disappears off the bus (spins down goes to sleep, acts like a green drive acts).

New Mac Pro will not start

Hi,
After doing the last update from apple my Mac Pro (late 2013) won't start up.
I installed the update this morning and every thing was working fine. After (ironically enough playing watch dogs) my Mac Pro went to sleep and never woke up. I have fanatically tried everything in my capacity to make it go on again without any result.
The lights in the back goes on but there is no chime or fan noise from the mac. The screens does not go on either.
I have tried to unplug the screens and tried every configuration possible with screens and without. Keyboard and no keyboard.
But the only result I get is the ligths in the back going up, and then down again...
I need help!

I think it is plugged in since the OP said "The lights in the back goes on"
Ho Lee MACkeral wrote:
Have you unplugged the Mac Pro?
You may also wnat to try zapping the PRAM and reset the SMC.

My new macbook pro will not download Mavericks, says it does not meet system requirements. Help!

Mavericks will not download on new macbook pro. says it does not meet system requirements. What?
Thank you! Sales associate said it needed to be downloaded. I am new to Macbook. Thanks again!

It already has Mavericks installed on it. There's nothing to download.

New Mac Pro: Will I need to toss out my esata RAID systems?

Similar Messages

Maybe you are looking for