New Mac PRO - Windows 8 Pro Ensure that the disk's controller is enabled in the computer's bios menu

Hello all,
I got a new Mac Pro 2013, and am trying to install windows 8 using the Boot Camp Utility. It creates a 200GB partition, partitioned in FAT. Having done this on my other computers, I usually hit advanced options and then reformat the partition as NTFS. I then install. When i format, I still get this error:
Windows 8 cannot be installed - ensure that the disk's controller is enabled in the computer's bios menu. I'm not sure how to get past this step. I am trying to boot from the windows 8 CD and run setup after I partition the drive. I have the USB key with the apple setup files on it.
What am I missing?

Apparently installing via an ISO fixed this issue for me.

Similar Messages

New mac and logic pro 9

Last week my old G5 died and I,m looking at getting a new mac and logic pro 9.
My G5 had logic pro 7 and 8 installed on it. I was wondering do I need to install
those back on my new mac so I can upgrade to logic 9 or could I just install logic 9 on my new computer. I have the key that came with logic 7 and that's what I used to install logic 8 with. I really don't want to put those on my new computer. Also will logic 9 load my logic 8 songs.
Thanks for your help,
Chuck Floyd

Chuck Floyd1 wrote:
Last week my old G5 died and I,m looking at getting a new mac and logic pro 9.
My G5 had logic pro 7 and 8 installed on it. I was wondering do I need to install those back on my new mac so I can upgrade to logic 9
No.
or could I just install logic 9 on my new computer.
Yes.
I have the key that came with logic 7 and that's what I used to install logic 8 with. I really don't want to put those on my new computer.
Why not? You could install just the apps, they do not take much space and you know for sure you can always open your old projects.
Also will logic 9 load my logic 8 songs.
In principle, yes. But it can vary, depending on what you use(d) in those L8 projects (environment alterations, 3rd party plugins etc etc). If they won't load, use L8. I'ld advise you to install both L7 and L8, just in case. Just skip the samplecontent etc on both installs, do only the apps themselves.
regards, Erik.

When I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

when I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

Hi
And without info - it's near to impossibly to help. Try my general troubleshooting note:
Troubleshooting note
When iMovie doesn't work as intended this can be due to a lot of reasons
iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
problem in iMovie Cache folder - trash Cache.mov and Cache.plist
Creating a new User-Account and log into this
This forces iMovie to create all pref. and cache files new and error free
Event or Project got corrupted - try to make a copy and repair
a Codec is used that doesn't work (even though iMovie and/or iDVD tries to / they fail in the end)
version miss match of QuickTime Player / iMovie / iDVD
preferences are wrong - Repair Preferences
other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
USB-flash-memories - usually do not work
Net-work connected hard disks - usually do not work (most often not fast enough and WRONGLY FORMATTES as DOS etc)
iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie. When iMovie starts-up it first look trough this iPhoto library and if faulty it all Halt’s.
This You do by
First - close iPhoto
Secondly - on start up of iPhoto - Keep {cmd and alt-keys down}
Thirdly - now select all five options presented
THEN - WAIT a long long time (>20 hours are not strange)
free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
Screen must be set to million-colors
Third-party plug-ins doesn't work OK
Run "Cache Out X", clear out all caches and restarts the Mac
Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
(I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
buenrodri wrote
I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
Last resort: Trash all of iMovie and re-install it
Yours Bengt W

Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. Thanks.

Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. I am getting lots of spelling errors as the MacBook laptop screen is too small. Thank you so much! .

Contentmom6 wrote:
Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work.
Normally, you just connect the monitor to the MacBook using a VGA adaptor that you can buy from an Apple Store. Now try System Preferences > Displays > Detect Displays. You should now be able to select a display mode for the monitor. If it still doesn't work, then I'd check that everything is properly connected. I've had problems with colours disappearing due to a faulty connection in the VGA adaptor.
Bob

Cannot select a music into slideshow and book slideshow presentations. In the older Mac this was easy. With new Mac OS X 10.6.8 it should work as I can stop the slideshow with cursor but pop up window for choosing music is dead. I cannot drag music into i

Cannot select a music into slideshow and book slideshow presentations. In the older Mac this was easy. With new Mac OS X 10.6.8 it should work as I can stop the slideshow with cursor but pop up window for choosing music is dead. I cannot drag music into it. Preselected music just goes on.

I am talking about iPhoto. In my old Mac even in Books choosing slideshow gives a pop up where you can select a music from I tunes library. In this new one I can stop the slideshow with cursor and it shows music option but it is, as I said dead. Does not response at all to commands.

When i update my iPhone 4s through iOS 7 with my mac, i tunes told me that an upgrade was necessary to sync with the new iOS 7 and of course i updated my iTunes to the ultimate version but my mac didn't work with this version of i tunes. What can i do

when i update my iPhone 4s through iOS 7 with my mac, i tunes told me that an upgrade was necessary to sync with the new iOS 7 and of course i updated my iTunes to the ultimate version but my mac didn't work with this version of i tunes. What can i do

Hello,
Only option is upgrading your Mac's OSX, since Apple will not allow iOS to go backwards.
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 4GB at least, more if you can afford it)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
Other countries...
http://support.apple.com/kb/HE57
It looks like they might still have it...
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA

I did not realize Ilife was already on the new mac, and installed I life from a disk. Now Iphoto has a circle with a slash, when trying to open is says (you can open iPhoto because is may be damaged or incomplete. ?

I did not realize Iife was already on the new mac, and installed I life from a disk. Now Iphoto has a circle with a slash, when trying to open is says (you can open iPhoto because is may be damaged or incomplete. ?

This sounds different than with my IOS devices, since I am able to see the photos even with a connection to the Internet.
Do you mean without a connection to the internet? With a connection it's logical you would be able to see the PS.
The following is from iCloud: Photo Stream FAQ
Can photos be saved or downloaded from a shared photo stream?
Yes. Once photos are shared, anyone who can view the shared photo stream can download and keep the photos permanently.
On a device using iOS 6 or later, you can save photos to the Camera Roll. On a Mac, using iPhoto 9.4 or Aperture 3.4, you can save photos from the shared stream to your local Photo Library or any other location on your Mac. On a Windows PC, you can copy photos from a shared photo stream to any folder. On the web, photos can be downloaded directly to your computer from the detail view of each photo.
This tells me that the image files are not on the HD unless the subscriber chooses to download them.

Macbook Pro will not read CD. Comes up with the message "The disk you inserted was not readable by computer"

Macbook Pro will not read CD. Comes up with the message "The disk you inserted was not readable by computer"
Is it a hardware problem or a software problem?
Any help solving this would be appreciated

Hello M1ckyD,
The article linked below details a number of troubleshooting steps that can help resolve issues with your Mac's Optical Drive.
Apple Computers: Troubleshooting the slot-loading SuperDrive
http://support.apple.com/kb/HT2801
Cheers,
Allen

I bought games and music on my ipod touch and then bought a new mac, but i updated my ipod on the new mac and lost all of my games and music and they arent on my computer or my ipod touch:( The apps i bought are not on my old computer either!! please help

bought games and music on my ipod touch and then bought a new mac, but i updated my ipod on the new mac and lost all of my games and music and they arent on my computer or my ipod touch:( The apps i bought are not on my old computer either!! please help!!! I don't want to buy them all again!!

- You can redownload yur apps at no additional cost. See:
How to redownload purchased apps from the App Store
- You only get one download of music and it is up to you to make a backup. However, sometimes if you explain what happens the iTunes store may allow a redownload of music. You can contact them by starting here and selecting the appropriate topic:
Apple - Support - iTunes

I've just got a new Dell with windows 7. When I try to download itunes it says the windows installer can't be found

I've just got a new Dell with windows 7. When I try to download itunes it says the windows installer can't be found

When your username includes a Charakter like "acson te graf" zhere is a Problem for Windows to find your installiert-Files. Yust Build another Username like "Dummy", give admistration rights, change to this user and install iTunes on this accout. Now you can Return to your Old account an use iTunes.
I am still surching how to change the username in Windows but still no idea.

There is an unclosed comment block in the SQL statement. Ensure that there are balanced "/*" and "*/" comment markers in the SQL statement.

I get this error - when I try a Multi-line comment entry - by using the /* and */
"There is an unclosed comment block in the SQL statement. Ensure that there are balanced "/*" and "*/" comment
markers in the SQL statement."
Even though I am entering both the /* and the */.
I tried it many way - in the same line, in different lines etc..
like
/* Select xxx from xxx */
or
Select xxx from xxx
or
/* Select xx from xx
Please help anyone..! ;=(

But When I do a Help/About I see that it is
the SSMSE's Help About screen says "SQL Server 2005"
However I downloaded and installed SQL Server 2014 last night and was entering queries..
Most Select Queries work fine..
the -- comment line works fine..then I stumbled on the /* - */ does not work.
Thanks.
Well, you have two different version of SQL Server installed on your machine. Please connect again from SSMS to the SQL Server 2014.
T-SQL Articles
T-SQL e-book by TechNet Wiki Community
T-SQL blog

I just downloaded photoshop elements 7.0 to a new box and it tells me that my serial number is not valid. the adobe support team says the number is valid, but that they can't help me

i just downloaded photoshop elements 7.0 to a new box and it tells me that my serial number is not valid. the adobe support team says the number is valid, but that they can't help me

Which operating system are you using?
When you say downloaded, where did download pse 7 from?
Do you have the original install disk or original download for pse 7?
I believe the serials won't interchange between the disk version of pse 7 and the electronic down load version.

First question - I have Acrobat 9 on my desktop and the license seems to have been messed up. I tried to download and fis but I asked me for a disk. I don't have any idea where the "disk" is. Can I get the license update without that disk?

First question - I have Acrobat 9 on my desktop and the license seems to have been messed up. I tried to download and fis but I asked me for a disk. I don't have any idea where the "disk" is. Can I get the license update without that disk?
Second question - In anticipation of not being able to do that, I bought (at University bookstore) Acrobat XI Pro - do I need to uninstall the 9.0 Pro version before I try to install the XI version?

If you still have your serial number for Acrobat Pro there is a link to the installer here: Download Acrobat products | 9, 8

I was trying to sync my itouch with my new mac, and some songs won't download because they are not authorized for this computer. But even after my computer was authorized they still won't sync. How do I fix this?

I was trying to sync my itouch with my new mac, and some songs won't download because they are not authorized for this computer. But even after my computer was authorized they still won't sync. How do I fix this?

I have the same problem. It is only with tv shows and only with programs I have downloaded after the software update.
Apple support sent me the above link too....but it doesn't solve the problem...my computer is authorized and the content is in my library and will play on my Mac air, but it will not sync the tv shows, it keeps saying my computer isn't authorized for it.
No answers here, but you are definitely not alone with this issue.

Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).only have one disk to select and my partition map scheme is GUID partition

just bough OSX Mountain Lion, my laptop operating with v10.6.8. Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).only have one disk to select and my partition map scheme is GUID partition table. 24.44gb disk available.

Verify your computer can run Mountain Lion:
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Open Disk Utility and verify the drive is partitioned using GUID and formatted Mac OS Extended, Journaled. If it is then do this:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Now try installing Mountain Lion.

New Mac PRO - Windows 8 Pro Ensure that the disk's controller is enabled in the computer's bios menu

Similar Messages

Maybe you are looking for