New mac set up problems with time machine

Bought a new 21 inch mac yesterday and going through set up I tried to use my time machine disk at the appropriate point  (when it asked me) to copy the data. Now the mac refuses to move on, after it rebooted I get the apple sign and the swirling thing despite a pram reset and booting in safe mode.
Any ideas on how I can force the mac to go back to original settings, it's literally just come out of the box and problems happened at the time machine part on set up.

Startup your Mac while holding down the Option key.
That should launch the Startup Manager window where you can select the startup disk then click Restart.
If that doesn't work, startup your Mac while holding down the Command + R keys.
From there you will have access to the built in utilities to restore OS X using OS X Recovery.
There is an option to restore from a Time Machine backup using OS X Recovery, but in this case, just restore OS X first. Get your Mac working again before using Time Machine.

Similar Messages

  • I bought a new mac and i migrate with time machine...but the backup was a little bit old and weren't save the latest modify i made in my website.. is it possible take the uploded site in iweb? sorry but i don't speak english very well.

    I bought a new mac and i migrate with time machine...but the backup was a little bit old and weren't save the latest modify i made in my website.. is it possible take the uploded site in iweb? sorry but i don't speak english very well

    But what can I cut and paste? the html code or image and text directly?
    depend on which template you used.
    if you use iweb photos page template then you need to search for my photos page solutions in this forum.
    @ot: cut and paste from the online version
    @rw: You can drag an image from the website to the Desktop
    have your try your methods in iweb photos page?

  • New Mac-user need help with time machine

    Hi. I have jut got rid of everything that reminds me of a pc, and installed an Imac + one macbook and a macbook pro in the house. I have also installed an airport extreme and connected an external 500gb drive + a printer to it. The idea was to use this network drive as a network backup disk for the different machines.
    My question is: Can Time machine use this networkdisk to backup the different machines connected to the network? If so, how do I set it up. Right now this disk is not listed when I try to configure time machine.
    Hope somebody have time to answer.
    Thanks.
    terjem

    Unfortunately even though Apple had touted the AEBS USB2 HD use with TimeMachine (TM) they pulled it from the Leopard TM feature list about 1 week before releasing Leopard GNBuild 9A581.
    At this time Apple does not support use of the AEBS USB HD for use TM.
    I strongly suspect we will see this feature return in one of the next two updates Apple releases for Leopard.
    In the meantime be patient and I don't recommend you use a hack to circumvent the current TM limitation.

  • HT1338 problems with time  machine and parallels desktop,  mac osx mountain lion 10.8

    have a good day, i have been problems with time  machine and parallels desktop, dont work in mac osx 10.8, i upgrate two mac´s (macbook air, imac), in the two machines shows problems, could you help me please.
    two machines have good ram memory (macbook air 11.1 2010 early , imac 2009 late).
    i am waiting for your help.
    thanks.
    Jesus.

    Take a look here:
    http://pondini.org/TM/Troubleshooting.html
    Specifically, you'll probably want to try item #A5 on that page, but there's a lot of other info there that may be useful.

  • Another problem with Time Machine

    This is the second time I have experienced the following problem with Time Machine. After 2 months of backups it gets to a point where backups fail and I cannot enter time machine. In each instance I have only used 110GB of the 500GB space.
    Is there a better solution to fixing this problem than deleting the sparsebundle? That seems to be the only way to get it to back up again.

    backup is failing again:
    Oct 28 08:39:58 MBA /System/Library/CoreServices/backupd[8307]: Starting standard backup
    Oct 28 08:40:02 MBA /System/Library/CoreServices/backupd[8307]: FSMatchAliasBulk returned 0 while resolving alias to backup target
    Oct 28 08:40:07 MBA /System/Library/CoreServices/backupd[8307]: Backup failed with error: 19
    Oct 28 09:22:57 MBA /System/Library/CoreServices/backupd[8464]: Starting standard backup
    Oct 28 09:22:58 MBA /System/Library/CoreServices/backupd[8464]: Network mountpoint /Volumes/MPTC not owned by backupd... remounting
    Oct 28 09:22:59 MBA /System/Library/CoreServices/backupd[8464]: Network volume mounted at: /Volumes/MPTC-1
    Oct 28 09:22:59 MBA /System/Library/CoreServices/backupd[8464]: Backup requested due to disk attach
    Oct 28 09:23:28 MBA /System/Library/CoreServices/backupd[8464]: Disk image /Volumes/MPTC-1/MBA_001f5bd2c764.sparsebundle mounted at: /Volumes/Backup of MBA
    Oct 28 09:23:32 MBA /System/Library/CoreServices/backupd[8464]: Backing up to: /Volumes/Backup of MBA/Backups.backupdb
    Oct 28 09:23:32 MBA /System/Library/CoreServices/backupd[8464]: Backup requested due to disk attach
    Oct 28 09:25:44 MBA /System/Library/CoreServices/backupd[8464]: No pre-backup thinning needed: 242.1 MB requested (including padding), 351.94 GB available
    Oct 28 09:41:34 MBA /System/Library/CoreServices/backupd[8464]: Copied 990 files (72.4 MB) from volume MacBook Air HD.
    Oct 28 09:41:35 MBA /System/Library/CoreServices/backupd[8464]: No pre-backup thinning needed: 159.6 MB requested (including padding), 351.94 GB available
    Oct 28 09:44:09 MBA /System/Library/CoreServices/backupd[8464]: Bulk setting Spotlight attributes failed.
    Oct 28 09:46:13 MBA /System/Library/CoreServices/backupd[8464]: Copied 879 files (2.2 MB) from volume MacBook Air HD.
    Oct 28 09:47:18 MBA /System/Library/CoreServices/backupd[8464]: Starting post-backup thinning
    Oct 28 09:49:15 MBA /System/Library/CoreServices/backupd[8464]: Deleted backup /Volumes/Backup of MBA/Backups.backupdb/MBA/2008-10-27-090710: 351.94 GB now available
    Oct 28 09:50:46 MBA /System/Library/CoreServices/backupd[8464]: Deleted backup /Volumes/Backup of MBA/Backups.backupdb/MBA/2008-10-27-061332: 351.94 GB now available
    Oct 28 09:52:53 MBA /System/Library/CoreServices/backupd[8464]: Deleted backup /Volumes/Backup of MBA/Backups.backupdb/MBA/2008-10-27-050805: 351.94 GB now available
    Oct 28 09:52:53 MBA /System/Library/CoreServices/backupd[8464]: Post-back up thinning complete: 3 expired backups removed
    Oct 28 09:52:53 MBA /System/Library/CoreServices/backupd[8464]: Backup completed successfully.
    Oct 28 09:53:11 MBA /System/Library/CoreServices/backupd[8464]: Attempt to eject diskimage failed with status: -47, dissenting pid: 0
    Oct 28 10:23:16 MBA /System/Library/CoreServices/backupd[8603]: Starting standard backup
    Oct 28 10:23:19 MBA /System/Library/CoreServices/backupd[8603]: Network volume mounted at: /Volumes/MPTC-1
    Oct 28 10:23:27 MBA /System/Library/CoreServices/backupd[8603]: Disk image /Volumes/MPTC-1/MBA_001f5bd2c764.sparsebundle mounted at: /Volumes/Backup of MBA
    Oct 28 10:23:27 MBA /System/Library/CoreServices/backupd[8603]: Backing up to: /Volumes/Backup of MBA/Backups.backupdb
    Oct 28 10:23:28 MBA /System/Library/CoreServices/backupd[8603]: Error: (-50) Creating directory 2008-10-28-102328.inProgress
    Oct 28 10:23:28 MBA /System/Library/CoreServices/backupd[8603]: Failed to make snapshot container.
    Oct 28 10:23:33 MBA /System/Library/CoreServices/backupd[8603]: Backup failed with error: 2
    Oct 28 10:23:33 MBA /System/Library/CoreServices/backupd[8603]: Attempt to eject diskimage failed with status: -47, dissenting pid: 0
    Oct 28 11:23:16 MBA /System/Library/CoreServices/backupd[8729]: Starting standard backup
    Oct 28 11:23:16 MBA /System/Library/CoreServices/backupd[8729]: Network volume mounted at: /Volumes/MPTC-1
    Oct 28 11:23:20 MBA /System/Library/CoreServices/backupd[8729]: Disk image /Volumes/MPTC-1/MBA_001f5bd2c764.sparsebundle mounted at: /Volumes/Backup of MBA
    Oct 28 11:23:20 MBA /System/Library/CoreServices/backupd[8729]: Backing up to: /Volumes/Backup of MBA/Backups.backupdb
    Oct 28 11:23:21 MBA /System/Library/CoreServices/backupd[8729]: Error: (-50) Creating directory 2008-10-28-112321.inProgress
    Oct 28 11:23:21 MBA /System/Library/CoreServices/backupd[8729]: Failed to make snapshot container.
    Oct 28 11:23:26 MBA /System/Library/CoreServices/backupd[8729]: Backup failed with error: 2
    Oct 28 11:23:26 MBA /System/Library/CoreServices/backupd[8729]: Attempt to eject diskimage failed with status: -47, dissenting pid: 0
    Oct 28 11:24:05 MBA /System/Library/CoreServices/backupd[8729]: Stopping backupd to allow ejection of backup destination disk!
    Oct 28 11:24:11 MBA /System/Library/CoreServices/backupd[8747]: Backup requested by user
    Oct 28 11:24:11 MBA /System/Library/CoreServices/backupd[8747]: Starting standard backup
    Oct 28 11:24:11 MBA /System/Library/CoreServices/backupd[8747]: Network volume mounted at: /Volumes/MPTC-1
    Oct 28 11:24:12 MBA /System/Library/CoreServices/backupd[8747]: Disk image /Volumes/MPTC-1/MBA_001f5bd2c764.sparsebundle mounted at: /Volumes/Backup of MBA
    Oct 28 11:24:12 MBA /System/Library/CoreServices/backupd[8747]: Backing up to: /Volumes/Backup of MBA/Backups.backupdb
    Oct 28 11:24:12 MBA /System/Library/CoreServices/backupd[8747]: Error: (-50) Creating directory 2008-10-28-112412.inProgress
    Oct 28 11:24:12 MBA /System/Library/CoreServices/backupd[8747]: Failed to make snapshot container.
    Oct 28 11:24:17 MBA /System/Library/CoreServices/backupd[8747]: Backup failed with error: 2
    Oct 28 11:24:17 MBA /System/Library/CoreServices/backupd[8747]: Attempt to eject diskimage failed with status: -47, dissenting pid: 0

  • I am having problems with Time Machine and having enough space to finish my last back up.

    I am having problems with Time Machine and having enough space to finish my last back up.

    Take a look at this link, http://support.apple.com/kb/HT1427

  • Problems with Time Machine restore

    Hi - am hoping someone can help me.
    My laptop got stolen last week and I bought a new one yesterday. The old one was kind of messy - I'd had it for a while and had been living with some weird error messages and that sort of thing - so I only wanted to transfer certain files - photos, music, movies and a few documents - to the new one from Time Machine via an external hard drive.
    I set up as a new user and chose to use Migration Assistant to transfer the files afterwards. It seemed to work fine but on closer inspection no files created after 2008 (ie any new music or photos) transferred. It's the photos I'm mostly worried about as I used Senuti on my iPod to recover the music and the video files were saved to the same external hard drive Time Machine was using but seem to be accessible. When I 'browse other Time Machine disks' and go into the last backup the Pictures folder has the little red minus/stop symbol on it, so I'm thinking it might be a permissions issue? I've tried restoring that folder but nothing changes.
    I'm wondering if I need to go back to migration assistant and start again but transferring everything this time? Will that even make a difference? Am hoping the files aren't lost forever (I'm a mum)!
    Please don't tell me how hopeless I am at all this or get narky - I know it and I'm already in a world of misery about the stolen mac and missing pics...

    Supermonk61 wrote:
    I recently had to do a restore all with time machine. I made sure everything was backed up before hand and ran the Leopard install disk. Went to utilities and did a restore all from time machine backup with no problem. Chose the date I wanted of March 24, 2009 and began running the restore which took about 2 hours. When everything came back up it seemed to have restored no problem but it used one of my backups from a year ago.
    Hi, and welcome to the forums.
    Why do you think it restored the wrong backup?

  • Problem with Time Machine, running Snow Leopard

    Hi all,
    Last week I had a new hard drive fitted into my iMac 8,1, after which Snow Leopard was reloaded (10.6.3 from the disc, updated to 10.6.8), followed by the restoration of data via Time Machine from my external hard drive. Whilst my Mac is now running beautifully, I am having problems backing up with Time Machine.
    When I run a backup, it prepares about 100,000 items, then starts to backup, usually about 650mb. It crawls along in kb until it gets to about 1mb, then jumps quickly to the end, but then it adds extra mb on the end. Then it suddenly starts again "preparing x items....." and off it goes again.
    I have tried repairing the backup disc, and it appears to be ok. I even erased it and started again. Time Machine did a full backup (139gb) in about 2 hours, then immediately added another 640mb at the end - strange, but I do at least have a full backup from yesterday. But now, everytime I run backup, it looks for the same sort of figure (650-700mb) and then goes round in circles.
    Any help would be very much appreciated!
    Thanks, David

    Hi Eric
    Thank you for your reply.  Here are the screenshots for each change:
    Having prepared about 95,000 items, the backup of 612mb begins
    14 minutes later a message appears
    Another 3 minutes and another message. You will see from this screenshot that the backup figure has changed to 613.1mb
    Another 30 seconds and it all begins again....
    And finally, 7 more minutes pass, another 96,000 items are prepared, and another 604.8mb backup begins.
    I might add, that between posting this morning, and your reply, I also went into disk utility, chose the top leve of the external drive, clicked on the partition tab, charged current to 1 partition, renamed the drive, erased it, and did a full back up of 139GB. After 137GB it started again, looked for 602mb, backed them up and finished the backup, which is why TM states that the last back up was at 18:16 today.
    Thanks again
    David

  • Problem with Time Machine Backup or Maybe Not Time Machine

    The problem manifests after a Time Machine backup.
    I have an iMac 24-inch, Early 2008. iMac 8,1
    Intel Core 2 Duo, 4GB RAM.
    Last week I purchased two  4-Terabyte G-technology G-Drives. Each drive is equip with FireWire 800 and USB 3.0/2.0. In general use they seem to work fine on the iMac.
    I designated one drive as a Time Machine Volume. This is where the problem happens.
    Time Machine will do the initial backup just fine. Then it runs once per hour with no problem. Intermittently however, Time Machine will fail and report :
    “Time Machine couldn’t complete the backup to “hard disk name”.
    Unable to complete backup. An error occurred while creating the backup folder.”
    Interestingly enough if I try to open a folder on the Time Machine volume using the Finder I get:
    “The operation can’t be completed. An unexpected error occurred (error code -50).
    If I try to eject the volume I get the irksome “Cannot eject volume because it’s currently in use by one or more programs.”
    To resolve this I’ve tried everything, from the banal verifying permissions, to swapping the two G-Drives around, swapping out all the cables, etc.. When the error occurs I go into the shell and check with lsof and always find no software apparently holding or using that volume.
    Very frustrating
    I can force eject the volume, then remount the volume and things are back to normal. Same with restarting.
    This happened under OS X Mountain Lion and is now happening under a clean install of Mavericks.
    I thought that even though I don’t see any MDS  related processes using the drive, it might be spotlight, so I told spotlight not to index the volume. Problem still happens.
    I’ve found that one person had almost this exact same problem at:
    https://discussions.apple.com/thread/4756742
    His solution turned out to be replacing the G-Drive with another brand new G-Drive.
    Unfortunately, I cannot return the drives to the Apple store because the boxes were tossed out. I also don’t relish trying to explain that the drives work just fine until some glitch that occurs either just before or just after a Time Machine backup.
    Does anyone have any suggestions?

    You can also contact G-Drive while the drives are under warranty (one year I believe).
    I have the same problem using Time Machine with the 2T G-Drive and my MacBook Pro. G-Tech emailed me a Firmware Update Utility app and, when that didn't solve the error message problem, they sent me a replacement drive and new cables, twice. The problem persisted; I get one or two backups each day and then the error message. I also can't copy anything to the drive and have to force eject it, so G-Tech suggested I see how well it worked with the USB cable.
    Time Machine works flawlessly with the USB cable and the G-Drive, so G-Tech suggested it is a problem with my Firewire 800 port. I worked with Apple Care over the phone, doing all the tests suggested in Eric's post - testing with Disk Utility, Time Machines interface with my User Accounts, the Operating System, then resetting Time Machine, etc. and then I took it to the Genius Bar so they could run the tests themselves. All looked like it should be fine (but they were using a 1T G-Drive and all testing was done within 30 minutes)...when I got home, after two good backups, I got the error message again.
    Apple Care finally suggested I make a Genius Bar appointment and sit at the store working with my MacBook, the G-Drive and Time Machine running until I got the error message, to prove the only thing left that could possibly be the cause of the problem, is the port.  I did this last Wednesday.
    It is 9 days later and I got my computer back this afternoon...the logic board was replaced because the Firewire 800 port is attached to it...I got my first Time Machine back up at 5:34pm...and the error message again at 7:34pm.
    The only solution, it seems, is to use the USB cable instead of Firewire. USB and Thunderbolt seem to be the direction Apple is taking, which is why so many people have been posting about this problem, here and elsewhere, with no real solutions from Apple. See this article:  http://www.infoworld.com/t/mac-laptop/how-cope-the-end-of-firewire-205957
    I hope the USB works for you too.

  • Problem with Time Machine back up

    Hello all,
    Grateful for anyone's help with this issue.
    Firstly, a summary of specs:
    Mac OS X 10.7.
    Late 2007 Macbook 13inch
    External hard drive - LaCie 1TB D2 Quaddra
    Issue - When trying to back up my 2007 Macbook it fails! When I back up my 2011 MacBook Pro (to the same external hard disk) it works fine!
    I have reviewed a whole load of advice on here, some I am able to understand others that I unable too! Sorry! Now stuck so thought I would post on here in the hope sometime might be able to give me some advice.
    I have downloaded a widget which helped me view the error message details (found that advice on the excellent Pondini website).
    The error message was:
    Starting standard backup
    Backing up to: /Volumes/Mike/Backups.backupdb
    Backup content size: 136.3 GB excluded items size: 8.2 GB for volume Macintosh HD
    153.65 GB required (including padding), 465.32 GB available
    Waiting for index to be ready (101)
    Stopping backup.
    Error: (-47) SrcErr:NO Copying /Applications/Address Book.app/Contents/MacOS/Address Book to /Volumes/Mike/Backups.backupdb/Mike surname removed’s MacBook/2012-12-26-120325.inProgress/560DC4C6-DFCE-48AA-B430-457C461AEA0F/Macin tosh HD/Applications/Address Book.app/Contents/MacOS
    Copied 9 files (774 KB) from volume Macintosh HD.
    Copy stage failed with error:11
    Backup failed with error: 11
    To be honest this is pretty much gooblygook to me! But I did try to locate the file that was causing the problem (Address Book) and excluded it from the Time Machine backup, I then received this error message:
    Starting standard backup
    Backing up to: /Volumes/Mike/Backups.backupdb
    Backup content size: 136.3 GB excluded items size: 8.3 GB for volume Macintosh HD
    153.62 GB required (including padding), 465.32 GB available
    Waiting for index to be ready (101)
    Stopping backup.
    Error: (-47) SrcErr:NO Copying /Applications/adidas miCoach Manager.app/Contents/Frameworks/QtCore.framework/Versions/4/QtCore to /Volumes/Mike/Backups.backupdb/Mike surname removed’s MacBook/2012-12-26-120325.inProgress/65EE1FE8-D548-4CAD-AEC7-9B6A4C12FAD9/Macin tosh HD/Applications/adidas miCoach Manager.app/Contents/Frameworks/QtCore.framework/Versions/4
    Copied 12 files (2.7 MB) from volume Macintosh HD.
    Copy stage failed with error:11
    Backup failed with error: 11
    So I then excluded miCoach, but it failed again! This time with this message:
    Starting standard backup
    Backing up to: /Volumes/Mike/Backups.backupdb
    Backup content size: 136.3 GB excluded items size: 8.3 GB for volume Macintosh HD
    153.59 GB required (including padding), 465.32 GB available
    Waiting for index to be ready (101)
    Stopping backup.
    Error: (-47) SrcErr:NO Copying /Applications/Adobe Flash Player 9/Install Flash Player 9 UB.app/Contents/InstallerData/Installer.data to /Volumes/Mike/Backups.backupdb/Mike surname removed’s MacBook/2012-12-26-120325.inProgress/B7A9D12A-B391-4AD7-907D-01828917DF39/Macin tosh HD/Applications/Adobe Flash Player 9/Install Flash Player 9 UB.app/Contents/InstallerData
    So I excluded Adobe Flash Player, and....failed again, this time blaming the Calculator
    Starting standard backup
    Backing up to: /Volumes/Mike/Backups.backupdb
    Backup content size: 136.3 GB excluded items size: 8.3 GB for volume Macintosh HD
    153.59 GB required (including padding), 465.32 GB available
    Waiting for index to be ready (100)
    Stopping backup.
    Error: (-47) SrcErr:NO Copying /Applications/Calculator.app/Contents/Resources/Calculator.icns to /Volumes/Mike/Backups.backupdb/Mike surname removed’s MacBook/2012-12-26-120325.inProgress/60CC7EAA-FCE7-4FC3-B946-8B999E574797/Macin tosh HD/Applications/Calculator.app/Contents/Resources
    Copied 2760 files (27.1 MB) from volume Macintosh HD.
    Copy stage failed with error:11
    Backup failed with error: 11
    The way this is going I will not have any information left to back up!!
    Any advice warmly received.
    Merry Christmas

    miketangokilo wrote:
    Error: (-47) SrcErr:NO Copying /Library/Application Support/GarageBand/Instrument Library/Sampler/Sampler Files/Steel String Acoustic Guitar/50B-1GA1-B2.aif to /Volumes/Mike/Backups.backupdb/Mike Surname removed’s MacBook/2012-12-26-120325.inProgress/8614198B-1C54-4CF1-8C24-DDD9692FB82C/Macin tosh HD/Library/Application Support/GarageBand/Instrument Library/Sampler/Sampler Files/Steel String Acoustic Guitar
    We don't know exactly what error (-47) means.  Apple used to publish lists of error code, many years ago, before OSX, but very few now.  It's clearly something to do with the file named, but just what isn't clear. 
    But we do know that SrcErr:NO means the error is not on the "source" -- ie, your Mac.  It seems to be a problem writing the file to the TM drive. 
    So first, if you haven't yet, run Repair Disk on that TM partition, just to be sure it's ok.
    Also, be sure the disk has either the GUID (preferred) or APM partition map scheme.  Click the top line in Disk Utility's sidebar, and that will be shown at the lower right.  If it's MBR (Master Boot Record), that's a Windows setup, and sometimes doesn't work well with Time Machine, especially if there are multiple partitions.
    Prior to OSX, error -47 meant the file was busy.  If that's still true, something may be trying to access it while it's being written.  If you're running any anti-virus apps on that Mac, or anything else that might be looking at the backup drive, exclude the TM drive from it, or, better, turn it off.  Antivirus apps can interfere with TM backups -- some can even damage them.

  • Problem with Time Machine/Finder not finding and (keeping) remote drive

    I have a Mac Pro and hooked 2 Western Digital My Book 750GB drives via Firewire onto it to use as my time machine backup for the two MBP's in the house.
    The problem I run into may be more network related than Time Machine related. I have the file sharing turned on in Mac OS 10.5.2. I am able to select Mac Pro in Finder on each MBP and then under that select my Time Machine drive. Then within Time Machine I can select the My Book as my Time Machine drive. At this point I have no problem using Time Machine.
    Where the problem occurs is if I use Finder to browse other drives such as an Internal Drive I have in my MBP or my Mac Mini's drive it no longer can find the Time Machine drive. It just is like it loses sight of it somehow. All I need to do is once again go to Finder/Mac Pro and then select the specific Time Machine drive and then Time Machine is fine again.
    How can I get around this? It seems i have to make some type of permanent logon or so to this drive.

    1. try plugging in directly (think you did this already)
    2. try a different cable - switch to the one you know works.
    3. try a different port on the case.
    4. does the faulty one power up at all? can you hear the drive spinning?
    5. try switching to the good power adapter if you are not seeing action under #4.
    there may also be a reset button on the board or case.
    if these are not working, then the bridgeboard has died in the case. there is a board that the drive plugs into that gives you the firewire, usb connections, etc. the drive likely hasn't failed, you just need a new bridgeboard or case, as I doubt maxtor will sell you just that part. the drive can be pulled & put into another case.
    check out macsales.com if you need a new case.

  • Problems with time machine and external hard drive

    Hi all
    In 2009 with my imac I bought a WD external hard drive which the computer says is 148GB formatted. I recall that the hard drive contained folders with files for the running of the hard drive when I bought it - and after it had been plugged in to a mac and used as a time machine, it no longer worked on windows computers.
    Now I have used 195 GB on my computer's internal hard drive and wish to stop using the external hard drive as a time machine and instead use it for swapping files between computers and the like.
    How can I wipe the time machine back ups and start using it as per usual again? do i need to obtain the WD files from somewhere?
    thanks in advance
    Nick

    Hi Nick,
    Avoid the WD files completely, not needed & often a problem.
    You need to erase the Drive, & to use it on both Format it MS-DOS/FAT32, on the Mac or PC, but will have a 4 GB filesize limit, as well as other limitations.
    One option not mentioned yet is MacDrive for your PCs... allows them to Read/Write  & Format HFS+, so no need to reformat it...
    http://www.mediafour.com/products/macdrive/

  • Can I do a fresh install of os x to new SSD and restore applications with time machine?

    I am upgrading to a new ssd.  I have my current system backed up with time machine.  Can I install/format (extended journaled) and then recover my time-machine stored application to my new ssd?

    "BTW, you should NEVER use the Finder to copy items from TimeMachine. Use the TimeMachine application to recover files and applications."
    I don't know how to use the finder to copy files.  I am assuming I will be propted to use the TimeMachine application as a part of the clean install from snow leopard ( I am not upgrading to lion as of yet...).  I will have my mac os x disk, time machine partition on a seperate external hard drive, BlacX 2.5/3.5 HDD usb docking station and new blank crucial m4 ssd at my avail.  save for my wits...

  • Problem with Time Machine backup

    Hi all,
    i've been really excited about Lion and managed to get it and install it in under 50 minutes!
    It works great, even with my Office:Mac software, antivirus software and so on, fantastic considering other people have had issues.
    The one issue I seem to have is Lion working with its own application! Namely Time Machine!
    I have a 3Tb Western Digital My Book Live NAS which I bought a few weeks ago. I only use it for backing up my Macbook Pro and my Wifes Macbook and its been faultless with Time Machine, however when I try and continue running this with Lion I get an error saying;
    The network backup disk does not support the required AFP features
    From what I can find on the web this seems to be something to do with the NAS as apposed to Time Machine however I would have thought this would have been addressed before people like myself had the problem - After all i'm sure everyone will agree, back-ups are extremely important!
    If anyone has any suggestions how I can fix this I would be greatful
    Matt

    HI all,
    wow, thanks for all the fast replies, at least it seems i'm not the only one having these issues.
    I contacted apple support about this and there suggestion was to connect the disc up to my laptop and run diagnostics on it, however as its a NAS I only have an ethernet connection so that makes it difficult to connect directly. As it is I also logged a call with Western Digital and they have come back to me with a similar comment that Alex Lui has made in this discussion, namely that it is going to be fixed but not until August time.
    I've managed to sort out my back-ups all be it using Western Digitals WD Anywhere Backup software which does make me feel a little bit safer (even though its having to back up everything and says that will take approx 34 hours!)
    I'd have hoped Apple would have seen this coming, especially as I would guess its not only Western Digital drives that have this incompatability, however I suppose they were up to their eyebrows with other stuff they had to sort out before they could release Lion.

  • Video Problems with Time Machine

    I have a Mac Mini G5 with 1 GB RAM and 23" Cinema HD display. At highest resolution, Time Machine has problem with displays. The graphic is distorted and constantly flickering.
    When I drop the resolution from Millions color to Thousands color, the graphic display fine and Time Machine works fine.
    What is causing this display issue? Is it the onboard video card? How do I permanently fix this problem so that I can take full advantage of my Mini?
    Thanks,
    Simon

    Power Mac G5,PowerPC G5, 2.3 GHz, Memory: 4.5 GB, Geforce 6600 video, 30 inch Cinema display and having same issue with Time Machine video flickering and jumping about. "Fixed" by changing to thousands of colors on display but this is not an acceptable solution. Strange thing is that it has worked/looked ok for a little while. Help anyone?
    Additionally, InDesign CS2 does NOT work with Leopard on my machine. Crashes when save as or export is used.

Maybe you are looking for

  • Mac Mini to TV display

    I am trying to play 1920x1080 output from FCE via new MacMini (2.0 GHz, 1GB)to TV set. I am not having much luck. Trying to output several different formats, including AIC, but not much luck. Is anyone doing this? If so, what is your setting - Format

  • Tax configuration

    hai everybody when ever i m trying to maintain record for tax type mwst it is giving an error called "tax code in taxinj is invalid" can anybody guide where i have to search to fix this and maintain taxes for my docs thank you so much

  • Thinkpad T500 display error

    Hello, I have a serious problem with my new Thinkpad T500 NK145GE: If I view something with fast motion (e.g. a video clip from a concert, with spotlights etc.), I can see vertical break. Here is an example of it: Example This break is not static or

  • Xserve Raid will not mount - fibre channel link down

    I came back from being out of town and my Xserve is running, but will not mount on the G5 tower via fibre channel. It was powered off and up again and still nothing. Apple tech says to reset raid controllers, however, I have sensitive data on the dri

  • Satellite L300 - Can I replace the battery?

    Hello, I need your help. I have a Toshiba Satellite L300 and I have a problem with the battery, it discharges in a short period. The battery model no. is pa3534u-1brs. I wonder if I can replace this battery with other one that lasts more than 2 hours