New mac user with a simple question

i just got my new macbook a couple of months ago and was wondering how to burn cds from my itunes library? also can i burn dvds? i have the basic model with an upgrade of ram
thanks

Is there anything useful here or here?
(17313)

Similar Messages

New Mac User - probably a simple question.

I am a new mac user. I bought two macs to basically ichat my new daughter with her grandparents. This is the setup
1. Macbook 2.0 / 2 gig ram with built in isight. Ethernet DSL connection 6 mps down/768 up.
2. Mac Mini G4 / 1 gig ram with external isight. Ethernet DSL connections 2 mps down/384k up.
The quality just is very poor on the mac mini side. They can barely make out my daughter. The quality is acceptable on the macbook side. I have read the forum and tried the things I could understand. Under the connection doctor, the macbook side is getting 30fps and the mini is getting only 15fps.
Besides upgrading the mini to a intel based higher processor, is there anything we can do to get better video quality?
I tried this new software SIGHTSPEED and the video quality is amazing on both ends.

Hi Amit,
The quicktime setting should not be on Automatic or the very top setting of Intranet/LAN as they both have problems with iChat.
Your download speed means you should use the 1.5meg/T1/Intranet/Lan setting.
Don't forget the restart of iChat if you have to change the setting.
If his download is 1.5 meg to 3 meg (half yours) he should also use the 1.5meg/T1 setting.
Is there any chance he is doing a download at the same time or other internet use ?
Are there other computers at his end that are on line ?
There is a vauge chance that the modem at one end can not handle the current speeds you are supposed to get from the ISP. However this is likely to show up in Speed tests when it is a lot lower than what you (both) are paying for.
Test site http://www.bplspeedtest.com/broadband-speed-test.php use the button with the red and green arrows.
12:12 AM Monday; August 14, 2006

New Mac user-External Hard Drive question...

Just purchased my 1st Mac/the new Mac mini. Arrived today & am very impressed.
Set-up, right out of the box, was incredibly SIMPLE and I cant believe what a little dynamo this thing is! I've thought about 'switching' to a Mac from PC for quite a while, but was always a little nervous, so I've patiently watched & waited from the sidelines- until now - and it was well worth the wait.
My 'question' is, can anyone recommend a good external hard drive I can use interchangeably between my PC & my new Mini? Still using the PC until I get completely acclimated with Mac platform/etc - I'd like something with at least
1TB storage. Thanks!

derosky wrote:
I'm a new Mac user. My question is: Do I need a external hard drive to create a back up? Can I create abackup on a DVD or Hard Drive in MB. Please explain this to me. When I want to configure Time Machine it displays me no Drives to create a back up.
Time Machine requires an external hard drive
You can back up by other means to CDs or DVDs
If you are a .MAC customer you get a decent backup program that backs up to your iDisk and/or to CD-DVD
You would NOT want to back up to your internal drive since that would accomplish nothing - a dead or messed up HD is no good for either the beginning part of the other part where the backup is
LN

Brand new Mac user with a brand new Mac problem!

Hi Everyone --
I am a brand new Mac user... I've only had my MacBook Pro 13" for three days. My Mac has been continuously freezing while I use it. When it freezes I only have safari running so I know its not from application "overload". Once frozen, I cannot move the mouse, "esc" or use any commands. Essentially my only option is to force it to shut down by holding the power buttong down. Please let me know if anyone has any idea how to fix this! With school coming up I cannot afford for my computer to be freezing every 20 minutes!
Thanks in advance.
-Rachel

Well... I'd still take it back - let them know that you received it as a gift three days ago. They may still replace it for you or they may take it in for repair. Just be nice and explain that you don't expect a new MBP to function as it is (or malfunction) and let them, at least, run diagnostics on it. As it's so new, there may be something simple that they can fix as you wait. Did your boyfriend already register the machine with Apple or did you? They may take the registration date into account...
But I'd take it to the Apple Store, regardless...
Clinton

New mac user have a few questions

Hi everyone i made the switch to mac today and i have a few questions
1. How easy is it for me to update the Nvidia graphics drivers when Nvidia releases them ?
2. Should i bother with Antivirus software ?
3. what are some good sites for wallpapers and stuff - (wants to make his make look good)
4. Any tips for a new mac user please feel free
thank you for your time and help
mike

Hi mike and welcome to Discussions and the world of Apple,
4) have a read/look at the following for a better feeling for your Mac
http://www.apple.com/support/mac101/
http://www.apple.com/support/switch101/
http://www.apple.com/findouthow/mac/
Was a 'switcher' myself 4 years back and learned alot from them.
Regards
Stefan

HELP!~ new mac user with MAJOR external hard drive/iTunes problems

Hi everyone,
I hope you can help me out. I just got my new Powerbook Pro 2.0. It is really nice, but I am having a **** of a time with iTunes. I had an old Sony Viao and my friend turned me on to mac. So here I am, new computer and new 80G iPod. I have 120G of music on my external hard drive that played music right from the HD on my Vaio with no problems (until I upgraded to iT7.0, then the music ran choppy, but thats another issue). No, thinking that the Mac and iTunes will work perfectly together, I plugged in my External HD, turned on all the equipment, the mac finds the HD and I can see the music. Good. So, I change the location on the preferences to find the music on the ExHD and nothing. Then, I read all the forums and all and try EVERYTHING, moving the .xml file to the dektop, restarting iTunes, changing the location again, NOTHING works. I am about as frustrated as I can be. With over 26,000 songs that I cannot listen to.... I am about to regret this discision to get the mac. Any ideas? I also tried copy the files in the iTunes folder on the mac to the folder on the ExHD, but i don't know how on mac (there is no copy and paste command when you right click the mouse). I know my frustration is because I am new and dont know all the tricks yet.
I wish I could just call my buddy, but I am in Afghansitan fighting the taliban and he is in Hawaii. Any help is GREATLY appreciated.
Thanks
MBP 2.0 Mac OS X (10.4.8) Brand New Mac user.......

Select your ext HD and do a key board command - CMD+I (Get Info - File Menu). Under the Ownership & Permissions tab - do you have read and write access? If not give yourself that access. You may be prompted for your admin password.
If your ext HD is the same one you used with the Vaio then I am thinking your ext HD is formated as a FAT32 and not a NTFS. Mac can read NTFS but not write to a NTFS format disk. If it is FAT32 then Mac can read and write. If it is a HFS+ format (Mac format) then there is no issue of read and write unless the disk is locked.
To copy files from one HD to anorther on a Mac - all you need to do is select and drag to the new location.
Check the Help Menu's of iTunes and the Finder. There is wealth of info built into your Mac OSX.
MJ

New Mac user with iSight Problem

I have a MacBook Pro 17". I can't seem to get the built in iSight camera to work in iChat. I've tried the camera using Photobooth and iMovieHD and both of those allowed me to use the camera but when I try to use the camera in iChat...even just to see the video preview screen it tells me that my computer does not support video conferencing. Any thoughts? I'm a brand new Mac user so I'm not familiar with any of this software or hardware. Thanks.

Welcome to Discussions, clhockey
(1) Verify that your system meet all the requirements listed in this article for what you want to do:
http://docs.info.apple.com/article.html?artnum=306687
(2) Check your broadband speed (up and down) using this site: http://www.speedtest.net/.
Other than your browser, do not have any app that use the internet running while you test.
(3) Check (and adjust if necessary) to see that your System Preferences > QuickTime > Streaming > Streaming Speed is set to 1MB or higher.
(4) Quit ALL applications. Then launch iChat only and see if it works for you.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.10) G5 DP 1.8 w/Mac OS X (10.5) External iSight

New Mac user with some questions!

Hello everyone, I fairly new to mac! (I came from the Dark Side....PC)And here is how this happen. I was searching a local web page of people that sell used computer and searched for a couple of days when I came across a G5 1.6 being sold for parts (DEAD G5 No Power issue), everything was in it but the HD. I thought I would pick it up for the $150.00 the seller was asking thinking I could possible purchase parts to fix it! LOL well that was a BIG heck no!! Well remember I have $150.00 in this already. Well after seeing all the problems everyone was having with the G5's and the dreaded no power "DEAD G5" threads every where I was getting a little worried if I wasted the money on a doorstop. I talked to a few people and look around on the net again to see how much used "working" G5 1.6 were going for, I saw a few that were inflated in price and saw some that were fair in price.
So with the research I did (and still a little worried if I did the right ting) I took the G5 to the apple store and had them look at it. They told me it could be the Logic board, CPU, and or PSU and was given a paper with the parts and labor as a est. $1083.00 was the price for the above parts to be replaced, I felt like I was being robbed. But I told them to look at it and call me with the issues before any work was done!
Ok as of right now I have $150.00 in it already plus the $100.00 Diag fee. No biggie at least the case is worth $250.00 for a PC case!(LOL) Just joking guys!!
The next day the local Apple store called me and told me it was the logic board, and when they get the new board in they would be able to test the CPU. So I told them to replace the Logic board.... Later that day the call came in saying the CPU and PSU were good and they installed Tiger on it for me for free. So far at the 1st visit to the apple store when I dropped off the G5 I was like dang I'm not enjoying this, but now afer a logic board replacement and level 2 tech it came to $535.00.
So
$150.00 (Purcased from seller)
$ 60.00 (160gb SATA HD)
$535.00 (Logic board & Level 2 Labor)
$745.00 total cost
Now here is the question!
Was it a smart thing to get the logic board replaced?
Will this G5 1.6 handle Final Cut Pro for 1080i footage captured with a Sony HDV-fx7?
Be Honest with me, I want to know if I was a goof ball or not!!
Thanks for you help
Mike Perry
Georgia Army National Guard
Support The Troops!
"Liberation Of Kuwait"
"Operation Enduring Freedom"
"Operation Uphold Democracy"

Hi MikePerry-
In accounting terms, your expense to repair the machine is considered "sunk cost." Even if you got totally hosed (and you did not) what's done is done.
You can check eBay for comparable setups.
This setup will be able to handle the stated editing needs.
I don't know you well enough to fairly establish any goofball factor
Luck-
-DaddyPaycheck

Help needed for a new Mac user with his photo and video librarys

after swopping my Ericson for an iphone a year ago. then taking delivery of an iPad on launch day. I have finally taken the plunge and swopped my windows pc for a lovely 27" iMac... what have I been doing all these years using windows? using the Mac is a joy.
As I get more involved with their products I am constantly fascinated (and frustrated) by Apples way of doing things. this situation is no exception and I need Apple people with Apple experience to help me make a decision.　
I am looking at software to organise my photos and videos. I have approximately 7000 photos residing on a windows home server. in addition to that there are some 200 or so HD videos taken with either my Sanyo Xacti camcorder or Sony DSC W300 camera. both cameras I think produce MPEG format
my first experience was iPhoto. great for the `price' but not very flexible. single libraries, poor editing facilities. and because I have files referenced and not copied to my iPhoto library, if I deleted from the library its not deleted from the server (and vice versa). this leads to images being displayed in the library that don't exist etc.
then I downloaded the Aperture 3 trial. great until I came across the `Unsupported file format' situation with the MPEG videos that strangely enough, iPhoto will recognise and play (the Apple way of doing things).
1. should I put the photos on the Mac instead of the server?
2. Is there a better way of managing the images for deletions etc
3. should I stick with Aperture because of the editing
4. is there a better software or way of managing the videos
sorry for the ramble but its all new to me

had a good session on all three of the recommended programs and now have a better understanding of the excellent advice I have been given.
iPhoto
great `free' program that is easy to use but somewhat limited on features. think I would always be looking to upgrade from here (feels a bit boring)
Aperture
really enjoyed using this but at £170! a hefty price tag considering its limited file support. fortunately its only my camera video clips (MPEG) that it wont view. my camcorder files (MP4) are fine so this is looking better as a one stop solution.
Elements
much more than just a image touch up. considering what it can do.. very good value at around £60. teamed with iPhoto it becomes even more attractive.
My issue still remains with the masters file location.
I would prefer to keep all my media on the external server to ensure I have a fail safe recovery option. its a 4TB 5 disk affair which contains all the family music, video images and DVD's etc (likely to change to a Mac server in the future!)
one feature that I cant find, (even in Aperture which surprises me), is the ability to automatically manage deletions from referenced locations? i.e. delete a file from the server and when aperture opens up the thumbnails are updated. or, delete a referenced master in Aperture and an option comes up to delete the referenced file on the external drive.
how would a professional photographer or studio using Aperture manage this process (or would they use something else?)
forgot to mention that through our student facilities i can get a discounted copy of Photoshop CS5 for around £175 which is close to Aperture. is this a worthwhile option or overkill
Message was edited by: buttons129

First-time Mac user with Migration Assistant woes

I'm a new Mac user with a MacBook Air. Still trying to get the migration process completed after three days so I can start using my computer. Looks nice, at least. Three questions:
1. After a 36-hour migration attempt from a PC over Wi-Fi, and with 2 hours to go, I'm getting a "Reconnecting to Mac" window on the PC. If it reconnects, how long could it take? It's still sitting there after 15 minutes.
2. If I cancel the migration process, do I have to start over and cross my fingers for another 36 hours, or does it pick up where it left off?
3. Is there any way to get a faster file transfer, say by Ethernet cable (I have the adapter), USB, anything. This is becoming painful.
I have verified the Wi-Fi connection is up and running. I can connect and reach the internet from my PC.
I don't want to schlep to the Apple Store. I bought this on Apple's assurance that the migration process would would work. If it doesn't, I'm returning it.
Thanks.

Steve, you don't have to run Migration Assistant right away. You can set it up as if you weren't going to migrate anything. You can start using your Mac right away.
Later, you can run Migration Assistant any time you want.
Depending on when you cancel MA, it is probable that whatever it did up to that point will be lost. 36 hours is unreasonable.
After you start using your Mac and are comfortable that it works to your satisfaction, connect the two with an Ethernet cable. Make sure it's a Category 5e or Category 6 patch cable (most are today). Then run MA. That ought to work and nothing will be faster.
For what it's worth I never got MA to function properly upon initial setup. It ought to work in theory but mine would get stuck at about the 99% point. Running it after initial setup has always been more reliable. I don't know why.

May be slightly simple question from a new Mac user: Why can't I quit safari? I cannot quit it from top menu bar neither to do it from dock? All other apps are working normally.

May be slightly simple question from a new Mac user: Why can't I quit safari? I cannot quit it from top menu bar neither to do it from dock? All other apps are working normally.

Or you can actived the right button on your magic mouse and click on they icon in the dock. then you select "stop" and it's out of your dock.
Greetings
*update: Sorry, my mistake! I didn't read your message correct! Sorry for the inconvience!

Stacks and other simple issues..... for new Mac user

My first computer was a commodore 64 with DOS commands and I've been a PC user ever since. You guessed it, Friday I went to the Apple store and bought an iMac! I was up and using it in minutes so I am impressed. However there are a million little things I just can't figure out or that take hours, for example at the Apple store the docking bar when you ran your mouse over the icons they jumped up. Well after a few hours I figured out how to make mine do that! (so cool).
At the store they showed me "stacks" where i put my mouse on something and I could see, pix or documents or e-mail I had somehow saved there, very handy but if my Mac can do that I sure don't see how.
Here are my two questions:
1) how do i make stacks work (is it some program i don't have?)
2) is there a web site or book or something with all the easy stuff (tips and tricks) in it a brand new Mac user should know? (i hate to keep bothering you all with simple questions)
Thanks, Susa

Welcome to Mac.
1) Just drag any folder to the right hand side of the dotted line (the Trash side) of Dock. Then click. Or click and hold on the stack and choose how your stack displays.
2) take a look at Mac 101 and Switch 101. There's a wealth of info there.
Books? "The Missing Manual Leopard Edition" (coming soon) by David Pogue.
-mj
[email protected]

I am a new mac user and have a 15 macbook pro (non retina display). I am having an issue with safari "freezing" ...it will work fine for a while and then I will open a new tab and attempt a website that won't load and after that it seems no website will.

So yes like mentioned above...i am a new mac user...have only had it about four days and have had a windows based system always before this. The issue I am having is that I will be in safari and it will work perfect for a while and then i will open a new tab and attempt another website and it will either be extremely slow or will give the error that it cannot connect to the server, however, when i run diagnostics my internet is fine. The only solution i have found is to reboot and geeksquad has been unable to replicate the problem while connected to my computer to try to do so. Does anyone have any suggestions or anyone else with this problem? If you have a "fix" please try layman's terms because again I have no idea about macs haha. Thanks,

So yes like mentioned above...i am a new mac user...have only had it about four days and have had a windows based system always before this. The issue I am having is that I will be in safari and it will work perfect for a while and then i will open a new tab and attempt another website and it will either be extremely slow or will give the error that it cannot connect to the server, however, when i run diagnostics my internet is fine. The only solution i have found is to reboot and geeksquad has been unable to replicate the problem while connected to my computer to try to do so. Does anyone have any suggestions or anyone else with this problem? If you have a "fix" please try layman's terms because again I have no idea about macs haha. Thanks,

Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. Thanks.

Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. I am getting lots of spelling errors as the MacBook laptop screen is too small. Thank you so much! .

Contentmom6 wrote:
Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work.
Normally, you just connect the monitor to the MacBook using a VGA adaptor that you can buy from an Apple Store. Now try System Preferences > Displays > Detect Displays. You should now be able to select a display mode for the monitor. If it still doesn't work, then I'd check that everything is properly connected. I've had problems with colours disappearing due to a faulty connection in the VGA adaptor.
Bob

Hello everyone. As a new Mac user, I would really like to know the easiest way to move my music files from my old PC to my MacBook? Do I move only the files, the entire iTunes and how? I have a lot of music so it is not a solution with iPod/iPhone.

Hello everyone. As a new Mac user, I would really like to know the easiest way to move my music files from my old PC to my MacBook? Do I move only the files, the entire iTunes and how? I have a lot of music so it is not a solution with iPod/iPhone.

Your best option is to post this in the iTunes forum.
Ciao.

New mac user with a simple question

Similar Messages

Maybe you are looking for