New Macbook air 2014
I just bought a configured Macbook air with 8Gb from an APR store an supposed it was a 2014 model since it had a 1,4GHZ processor. to my surprise i enter the system information and it tells me i have a Mid 2013 model??? why is that??
Charlie East wrote:
the 2013 shouldnt have the 1,4GHZ processor acoording to specs, so is my mac a transition model? or just skizofrenic?
2013 I5 is 1.3GHZ
(1.3GHz)
If you have a 1.4GHZ, then you have a 2014 Air. Simple
Once again, the folks in this thread are complicating things
Similar Messages
-
New MacBook Air 2014 Wi-Fi Problems
Today I've got my new MacBook Air 13", my old one (mid 2012) has been broken.
With my old one (with Mavericks installed), I had no problems with my wi-fi at home.
I haven't changed a thing, but my new one is not capable to connect.
So I tried from WPA2 to no protection - just to test it -, because after entered the password it always prints: timed out (Zeitüberschreitung).
But with no protection it also doesn't work. :/
Has anyone got an idea?
WLAN - Specs:
Signalstrength: FULL (the router is just 4 meters away).
Router: Netgear WGT624 v3 (with latest firmware)
SSID is not hidden, Channel is 6, Mode is "auto" which means (b+g).
Protection is WPA and WPA2 (tried only WPA2, does not work)
Access Control is turned off - until I get the MBA back into it
DHCP is enabled
Other devices like Android Smartphones (Android 4.x) and HP Printer (Deskjet 6840) work
MBA - Specs:
Out of the box
Downloaded the latest update for Mavericks (10.9.3) and installed (other PC and USB-stick)Thanks alot for the reply.
Did it that way. Everything is fresh again in Network Configuration Window.
But it still does not connect.
Another thing I tried now: I started the network assistant. After selecting and entering the password, it says: password wrong. But it is not, definitely. (changed it to a little bit easier one on the router for a test, same error message).
So I've got two different error messages:
When I select the WLAN out of the AirPort-Symbol and then enter the password, it says: timelimit reached (Zeitlimit überschritten)
When I use the Network Connection Window and start the assistant the error message is: wrong password (Falsches Passwort).
Tried also with static ip and DHCP (both works on the router with other devices and both has worked also with the old MBA). Same two error messages. I have no other WLAN to test it today.
Is there a way on the console so I can see all of the output? Maybe the Windows hiding messages from me ... I'm wondering about the two different error messages.
With all possible thanks for your help! -
When will a new macbook air 2014 be presented?
I have been planning to buy macbook, and air seems to be the most appropriate for my needs, but theres no retina display in it. So I wonder if it will be presented soon and is it worth waiting?
discussing future products etc is not allowed on the board.
the 2014 model came out with a faster I5 and lower price just a short time ago. -
Loading Adobe Photoshop on my MacBook Air (2014) without an optical drive
My lab at the University already has Adobe Photoshop. I am wondering how do I download it on my new MacBook Air (2014) without an optical drive.
Another query is about the usability of photoshop on MacBook Air. Mine is a 1.4Ghz, 128gb, 8mb (RAM) MAB. I am not a heavy user of Photoshop, but I need it once in a while for improving images from experiments. These images are mostly kept in a dropbox. I am wondering if the above specification sufficient.
Any help would be appreciated. ThankDownloads for most Adobe applications are available thru the following page:
Download and Installation Help -
https://helpx.adobe.com/download-install.html
As far as your machine versus the software goes, check the following for whatever version of Photoshop this involves:
System requirements | Photoshop -
USB 3.0 external drive extremely slow on Macbook Air 2014
Dear Apple Support Team & Folks in Apple Community,
Seriously, I have a problem with my new Macbook Air 2014 which has equipped with USB 3.0 port. I read through the forum and hardly find a solution for this.
Recently, I plugged in my USB 3.0 external drive and expect that it would reach the same file transfer speed as that on my PC. Instead of 625 MB/s (5 Gbit/s), it was hardly reaching 60 MB/s (480 Mbit/s) to my surprise! Sounds like Macbook Air doesn't recognize USB 3.0 device properly. I have tried Western Digital and Seagate devices but failed to get reasonable transfer speed on my Macbook Air.
I tried it again with my USB 2.0 external drive on Macbook Air and only got the transfer speed around 15 - 20 MB/s which is disappointing.
Any patches or Firmware updates would be appreciate!
I have OS X 10.9.3 already with EFI and SMC update patched by App Store.I would be interested to know which consumer grade non-raid external harddisk that could reach 6xx mb/sec.
The speed you mentioned should be normal, since most of these are 5400rpm drives (asumming it is 2.5 inch). -
My new MacBook Air locked up during my first attempt to migrate information from my old PC
I began the set up process for my new MacBook Air (2014). I got as far as the Migration Assistant. At first, my old PC (6 year old HP with Windows Vista) seemed to be communicating with my MacBook and transferring data. There was a lot of time remaining on the countdown to completion of the transfer, so I went to bed while the computers kept migrating data. I woke up, and the migration connection was lost. My MacBook screen is saying it is "transferring data to the Mac"- but the screen is the same, and the connection has obviously been lost. It seems to be locked up. I cannot get out of the screen to do anything! I would rather start the set up process all over without migrating any data at this point, and just start using my new MacBook. Help! How do I turn off the whole MacBook and start again?
Never mind! I realized that I needed to hold the power button down for longer than I thought to get the laptop to turn off. I turned it off, then back on, and was able to begin the process all over and am now up and running! Hoorah!
-
New Macbook Air 11" 2014 Model Display Hinge Loose and exacerbated by extremely poor service
I have bought a new MacBook Air 11 from Ezone on the 3rd of October. When I opened the product, I realised that the hinge seemed to be loose and would fall back on its own when tilted. That's when my troubles started.
I went to the Maple Apple Authorised Service Center at Santa Cruz, Mumbai and was told that the product was fine and that the screen tilt was 'normal'.
I then happened to visit some other stores and noticed that the MacBooks on display didn't swing back the same way.
I returned to the Service Center again and was told again that it was 'normal'. When I demanded to see the manager, I was told he had left for the day. I rang him and was told that I should come and see him the next day and he would provide a speedy resolution to the problem.
I rang the store that I'd purchased it from and they told me that they would be happy to replace the product provided the service center gave a certificate called DOA.
The next day was an even more harrowing experience. When I reached the manager's office, he tried telling me again that the product was 'normal'. When I explained to him that none of the in store models were like that, he said that to give the certificate, he would need at least 2 days as there was a 'process' to be followed. The 'process' is to merely record how the display flips back when tilted back.
I tried to call Apple Customer Care and spoke to Nishant and then Ravi (who told me that he usually never spoke to customers directly but as a special case was speaking to me since I'd had a bad experience!).
Ravi, assured me of a ideal resolution within 24 hours.
And so today, I received a call from Nishant, who informed me that because of the nature of the inconvenience, Apple had decided to offer 2 solutions: 1. They would ship a new machine from Singapore directly to my home address but that would take 4-5 business weeks. I was fine with that solution although I didn't understand the merit of sending a new laptop from Singapore. However, he then told me that I would FIRST have to submit the laptop and ONLY THEN would they ship it out to me. So essentially, I would be without a laptop for next month and a half! In short, a ridiculous solution. 2. The second solution was that I would have to give my BRAND NEW laptop (less than 2 weeks old!) to the service centre, they would repair it and return it in a few days. So we were back to square one. When I tried to understand the escalation process, I was curtly told that there was no escalation and this was Apple's response and resolution to my problem.
So, I, the unhappy customer, was given no choice except to turn in my machine to the service centre whereas, GLOBALLY, Apple would have replaced the machine if it was less than 2 weeks old!
Absolutely pathetic experience with no keenness to help except have longwinded calls that provided no solution whatsoever.
And this to a customer who's just bought a brand new machine and is expecting a spectacular experience! Even Lenovo or Sony offer onsite support, so the Apple experience is a terrible, terrible letdown.
I feel cheated and downright stupid for having paid such a premium for a product with manufacturing defect followed with such extraordinarily poor service!bump
-
Retina Display - New MacBook Air Release Date
Anyone know when the new MacBook Air will be available within the UK? I'm looking at purchasing one and don't want to buy, only to find out the new version comes out a few days later...
Hey CCSMG,
Thanks for the question. Are you referring to the new MacBook Air that was released this past week? If so, they are available in the UK as of today:
MacBook Air - Buy MacBook Air Notebook Computers - Apple Store (UK)
http://store.apple.com/uk/buy-mac/macbook-air
Apple (United Kingdom) - Apple Press Info - Apple Updates MacBook Air
http://www.apple.com/uk/pr/library/2014/04/29Apple-Updates-MacBook-Air.html
CUPERTINO, California—April 29, 2014—Apple today updated MacBook Air with faster processors and lower prices, making the perfect everyday notebook an even better value. Now starting at £749, MacBook Air features powerful processors, fast flash storage, 802.11ac Wi-Fi, up to 12 hours of battery life and Apple’s iLife and iWork apps, giving you everything you need to handle all your work, all day long.
Thanks,
Matt M. -
I am attaching an etrecheck report on my virtually new Macbook -Air to help diagnose the problems facing as regards Gmail - drafts get corrupted ; Error messages appear while composing emails & revolving Beachball shows up in various programs !
Also for a brand new machine it operates much slower than my husbands older Mac Airbook !
Hardware Information:
MacBook Air (13-inch, Mid 2013)
MacBook Air - model: MacBookAir6,2
1 1.3 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 5000 - VRAM: 1024 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
System Software:
OS X 10.9.1 (13B42) - Uptime: 11 days 16:27:24
Disk Information:
APPLE SSD SD0256F disk0 : (251 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 250.14 GB (219.37 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
Apple Internal Memory Card Reader
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.microsoft.office.licensing.helper.plist
[not loaded] com.teamviewer.teamviewer_service.plist
Launch Agents:
[not loaded] com.teamviewer.teamviewer.plist
[not loaded] com.teamviewer.teamviewer_desktop.plist
User Launch Agents:
[loaded] com.google.keystone.agent.plist
User Login Items:
iTunesHelper
3rd Party Preference Panes:
Flash Player
Internet Plug-ins::
SharePointBrowserPlugin: Version: 14.1.0
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
Flash Player: Version: 11.9.900.170 - SDK 10.6
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 537 - SDK 10.9
User Internet Plug-ins::
WebEx64: Version: 1.0 - SDK 10.6
Bad Fonts:
None
Old applications:
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4
/Library/Application Support/Microsoft/MERP2.0/Microsoft Error Reporting.app
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4
/Library/Application Support/Microsoft/MERP2.0/Microsoft Ship Asserts.app
Time Machine:
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 232.96 GB Disk used: 28.66 GB
Destinations:
rakesh [Network] (Last used)
Total size: 2
Total number of backups: 5
Oldest backup: 2013-12-12 03:23:43 +0000
Last backup: 2013-12-28 15:14:40 +0000
Size of backup disk: Excellent
Backup size 2 > (Disk size 232.96 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
2% WindowServer
2% hidd
1% EtreCheck
1% Microsoft Word
0% SystemUIServer
Top Processes by Memory:
131 MB softwareupdated
111 MB mds_stores
98 MB Microsoft Word
90 MB Finder
86 MB Google Chrome
Virtual Memory Statistics:
119 MB Free RAM
1.56 GB Active RAM
1.63 GB Inactive RAM
569 MB Wired RAM
6.31 GB Page-ins
7 MB Page-outsAlso here's the log before it happened. As you can see there is no activity from 9:48 to 10:00 am when the sound occurred.
23/02/2014 9:48:12.792 am ntpd[52]: FREQ state ignoring -0.145411 s
23/02/2014 9:48:15.258 am WindowServer[96]: _CGXHWCaptureWindowList: No capable active display found.
23/02/2014 9:48:20.000 am kernel[0]: AppleCamIn::systemWakeCall - messageType = 0xE0000280
23/02/2014 9:48:20.000 am kernel[0]: ARPT: 61.319378: AirPort_Brcm43xx::powerChange: System Sleep
23/02/2014 9:48:20.000 am kernel[0]: ARPT: 61.319390: wl0: powerChange: *** BONJOUR/MDNS OFFLOADS ARE NOT RUNNING.
23/02/2014 9:48:20.000 am kernel[0]: AppleCamIn::systemWakeCall - messageType = 0xE0000340
23/02/2014 10:00:04.000 am bootlog[0]: BOOT_TIME 1393167604 0
23/02/2014 10:00:06.000 am syslogd[17]: Configuration Notice:
ASL Module "com.apple.appstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
23/02/2014 10:00:06.000 am syslogd[17]: Configuration Notice:
ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd". -
Why is Macbook air 2014 used 15 days, the battery is lost 2,5% ?
Dear Sir or Madam,
I just bought a new macbook air Early 2014 and the first time charging and calibrated 3 times. Every it time i try charging 8 hours right , but now my battery is only 97,5%, so I was really disappointed in the quality of products.
The second, when i turned my mac display from white blue and after switch to white yellow. I check display it produced by Samsung vendor " LS "
Help me please feedback as soon as possible. The macbook air just active August 21,2014
Hien DuongNo current production Mac battery requires "calibration", so whatever you did is a waste of time and will not help. Discharging it completely more than once a month or so will needlessly reduce its longevity.
Read: Apple Portables: Calibrating your computer's battery for best performance
It is not possible to make any determination regarding its battery in such a short amount of time. Over the long term, its full charge capacity will decrease. Over the short term, it can either decrease or increase. What you are describing is not abnormal. -
New MacBook Air running really slow?!?!
Hello everyone,
Im new here and I hope I will find some help.
I got A new MacBook Air ( 1.4 GHz Intel Core i5 ) before xmas, on the 20th of Dec 2014... everything was ok, Im not moving it from its table...
Since I got it, I find it really SLOW when browsing the net... my old one was like 5 years old, with an almost dead battery and it was working like it was new.... and my Bf's MacBook Pro is 2 years old and its working more than fine!
Is it me being unlucky with it ??? Is it Yosemite??
Do I have to go to have it checked ?
Thanks in advance.
OanaYou have to take the computer to the Apple store to have it checked out.
Try resetting PRAM, SMC and staring up in SafeMode.
Reset PRAM. http://support.apple.com/kb/PH18761
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Start up in Safe Mode. http://support.apple.com/kb/PH18760
Best. -
Dear Everyone,
The first i want said sorry about my english is not good
I just bought a 13" MBA a 20 days ago, after 2 weeks of usage, i noticed the hinge were kind of loose whenever i lift the MBA up, the screen/display will tilt backwards easily. Thus i call to the service centre to ask about it issue , the technician mentioned that he will tighten the hinge and do not worry but But I think a new product within 20 days of purchase, but must go to a service center, it is so bad
Anybody encounter the same issue as well? Should i go to the service centre for repair it ? Actually if not better more and do not want use apple computer anymore, default i love machine and OS software and even used over 3 years from the macbook pro, Retina and now macbook air 2014. The first is battery and now hinges is loose.
Regards,
Hien DuongIt's under warranty. Take it in for service.
-
GPU panic on MacBook Air (2014) with Yosemite
Hello, my new MacBook Air (system details below) has been having intermittent GPU panics when using Safari. These seem to be correlated with sites on the Gawker network (e.g. http://www.gawker.com, http://www.lifehacker.com) when they play a pop up video ad. Here's a slice of the report from the console:
Event: GPU Reset
Data/Time: Mon Dec 8 19:44:05 2014
Application:
Path:
OS Version: Mac OS X Version 10.10.1 (Build 14B25)
Graphics Hardware: Intel HD Graphics 5000
Signature: 13
Report Data:
===========================================================================
Intel GPU Hang Summary
version 1.0.0
===========================================================================
-- Summary of Status for ALL Rings --
MAIN Ring is hung in a batch buffer <-- ROOT CAUSE!
MEDIA Ring is idle
BLT Ring is idle
VEBOX Ring is idle
The problem seems similar to this one: Kernel GPU Reset, Yosemite, MacBook Pro 13 Retina Early 2013
Sometimes the system recovers on its own, most recently I had to hold down the power button to restart.
Details of my system:
MacBook Air (13-inch, Early 2014)
1.4 GHz Intel Core i5
8 GB 1600 MHz DDR3
Intel HD Graphics 5000 1536 MB
OS X 10.10.1 (14B25)
Safari Version 8.0 (10600.1.25.1)The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies. -
Brand new MacBook Air came out of box damaged?
I purchased a new early 2014 13" MacBook Air last week, and I'm already having troubles with it.
I noticed the minute I opened it that there was a small chip on the edge of the laptop near the trackpad and decided to just deal with it cause I thought the genius bar workers might blow me off or accuse me of somehow doing it. Tonight I was working on assignments when I shut the laptop and realised that the screen was very very slightly misaligned on the edges, and then when I flipped it over I found that the bottom casing had lifted on one side near the plastic hinges.
It hasn't left my room and I am very gentle with all my apple products. No one else has touched it, either.
I feel like if I pay $1,400, the product I buy should be pretty flawless?
I'm just looking for reassurance that going to the genius bar is the best thing to do (I've booked in for Saturday). I am also wondering if they replace it, will they give me a refurbished product instead of a brand new MacBook Air?
Thanks ☺️You have a 14 day return policy if you purchased the MBA from Apple. If your MBA meets that criteria, return it.
Ciao. -
I have just bought a new Macbook Air several month ago, and i realize that my iMac is very very slow compare with the macbookair, what should i do to faster my iMac,
This few point happen slow at my iMac:
When Restart it is very slow.
When search spotlight or search a file using finder.
When Running iPhoto, iTunes, iMovie. Especially iPhoto
When transfering image from my phone to iphoto.
When Open New Application.
When working in multi application when swich between application, sometimes it was hang for a few second.
Sometimes typing aslo slow and the text wont come out and the cursor hold a few second.
I think above 7 points was very annoying my working, especially when in a rush.
Model Name: iMac
Model Identifier: iMac12,1
Processor Name: Intel Core i5
Processor Speed: 2.5 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 4 GB
Boot ROM Version: IM121.0047.B1F
HD Capacity: 499.25 GB (499,248,103,424 bytes)
Running OSX 10.9.2
Could anybody help me to solve this problem, i am guesing maybe my HDD not working properly, or if i change to SSD it will be better? but how?
Thanks to all of you that willing to help me.1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 300 25 5120 KiB/s 1024 85 \\b% 10240 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 50 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[45]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}')printf("%s (UID %s) is using %s '${p[$2]}'\n",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p ' ' {sub(/^ +/,"")};NR==6;NR==13&&$2< '${p[10]} ' 1,5d;/[Bmy].*:/d;H;$ { g;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6 { H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ s/ *:$//;x;s/\n//;/Apple|Genesy|Intel|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;} ' ' s/^.*C/C/;H;$ { g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' '/(sh|ng|ic)$/p' ' $3~/[0-9]:[0-9]{2}$/ { $4="";gsub(" "," ");gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}')print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR==2'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' ' s/^.{52}//;s/ .+//p ' ' /Launch[AD].+\.plist$/;END{if(NR<100)print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' '/\.(framew|lproj)/d;/plist:|:.+(M.+exec|scrip)/s/:[^:]+//p' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/;END{if(NR<100)print "/System/"};' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\//d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a)print "CPU: "a;if(b)print "I/O: "b;if(c)print "Net: "c" (KiB/s)";if(d)print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' /lR/ { if($2<='${p[25]}')print $2;} ' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2.+/,"",a[n-1]);b=b"\n"$2" "a[n-1]" "a[n]" "$1;c=c$1;} END { d="sort";print b|d;close(d);if(c)print("\n\t* Code injection");} ' ' NR!=4{next} {$NF=int($NF/10240)} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L)f=f"\n\t"$0;} END { F=FILENAME;if(!f) f="\n\t[N/A]";"file -b "F|getline T;if(T!~/^(A.+ E.+ text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n\t...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' '/:/!p' ' /:/{$0="'"${p[28]}"'"};1;' ' $0;END { if(NR<100)print "com.apple.";} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status '-F bsd -k Sender kernel -k Message CReq "Beac|caug|dead[^l]|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN" -k Message Ane "SMC:" -o -k Sender fseventsd -k Message CReq "SL"' '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' '{/,}L*/Lo*/Diag* -type f \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;' '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf} /u*/lo*/e*/per*/*/* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n 'syscall::'${p[33+j]}':return {@out[execname,uid]=sum(arg0)} tick-10sec {trunc(@out,1);exit(0)}'";done;l=(Restricted\ files Hidden\ apps RAM POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP RSSI Profiles 'Elapsed time (s)' Root\ crontab User\ crontab 'Global login items' 'User login items' );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;};for i in 0 1;do eval ' A'$((1+i))'() { v[0]=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "${v[0]}" ]];};A'$((3+i))'() { v[0]=` while read i;do eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "${v[0]}" ]];};A'$((5+i))'() { v[0]=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "${v[0]}" ]];};';done;A7(){ v[0]=$((`date +%s`-v[3]));};B2(){ v[$1]="${v[0]}";};for i in 0 1;do eval ' B'$i'() { unset v[0];((v['$((i+1))']==0))||{ v[0]=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v[0]=` paste -d: <(echo "${v[$1]}") <(echo "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v[0]=`grep -Fv "${v[$1]}"<<<"${v[0]}"`;};C0(){ echo "${v[0]}";};C1() { [[ "${v[0]}" ]]&&printf "${f[$1]}" "${l[$2]}" "${v[0]}";};C2() { v[0]=`echo ${v[0]}`;[[ "${v[0]}" != 0 ]]&&C1 0 $1;};C3() { v[0]=`sed -E "${s[0]}"<<<"${v[0]}"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;A0;{ A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;D13 0 $((N1+2)) 3 2;D13 0 $((N1+3)) 4 3;D22 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;A1 4 19 11;B4 0 0 44;C3 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&D22 11 17 17 20;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 52 0;B4 0 5 54;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 52 6;B4 0 7 54;B3 4 0 22;A3 14 6 52 0;B4 0 8 54;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 53 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 53 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&D13 21 0 32 19;D23 14 1 48 43;D23 14 2 48 44;D13 14 3 49 5;D22 4 4 50 0;D13 4 5 32 1;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D23 22 9 37 7;B1&&D13 10 42 32 41;D23 20 42 32 42;D13 25 37 32 33;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;D22 32 31 43 38;B1&&for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;B1&&D22 29 35 46 39;A7;C2 40;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At or near the top of the results, there will be a line that begins with "System Version." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.
Maybe you are looking for
-
How can I return to the previous screen in safari? the arrow is often grayed out.
how can I return to the previous screen in safari? the arrow is often grayed out.
-
I want my username to appear when I start typing, so I don't have to type the whole thing in each time. But I mistakenly typed my password before the username was entered, and now a username with my password appears in the list when I enter the first
-
Camera connector, nikon 3200, 0 pictures
I have a fifth generation video ipod, 30 GB, software version 1.1.2 and tried syncing pictures from my Nikon 3200 using the camera connector. It has worked fine for two imports of a few (50) pictures but on the third import, it seemed to stop during
-
How do i get my wifi to show up, how do i get my wifi to show up
i cant get my wi fi to show up on my i pod touch
-
Changing the size of a widget?
Dear Friends, I found a cool hack to drag a widget on to your desktop, http://www.askdavetaylor.com/dashboardwidgets_on_my_mac_os_xdesktop.html but the widgets are rather large to keep open all the time. Does anyone know how to change the size? I am