New macbook air (OS X) won't wake up from sleep

My brand new macbook air running on OS X Mav will often times not wake up from sleep, causing me to have to force it to restart in order to be able to do anything. Once it's awake it works perfectly until it falls asleep again. Any tips on things I should try?

Failure to wake from sleep is not normal regardless of the Energy Saver settings.
The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

Similar Messages

Macbook Air 13" Mid2011 won't wake up after sleep again after replacing logic board

I have replaced my logic board a few days ago for the issue of not waking up after sleep.
It was good when I was in store and the same night.
1 day later, when I put the laptop to sleep by clicking the sleep menu item, I cannot wake it up by all means in the next morning!!!!! Again!!!!!
I hooked it with a 22" LCD monitor via thunderbold to HDMI+HDMI to DVI. Will that cause issue?
I'm not sure when this will end, I cannot just keep replacing my logic board!

I have a Macbook Air and it also frequently (6 times out of 10) will not wake from sleep mode, only way to revive it is to hold down power button for 10 secs and force a restart. VERY FRUSTRATING!
I also occasionally use an external Apple 24' Screen (Non LED) and find that the MBAir will often freeze when you plug that into it or unplug it from it.. Perhaps I have a hardware fault on the MB Air? Or will this be fixed in software?

Macbook (White - old model) - Won't wake up from sleep sometimes when I close the lid

Sorry if showing the specifications of my Macbook is necessary
But lately, when I'm just going to take a break from my Macbook for a bit, I just close the lid
Sometimes, I just return in 5 minutes, and open the lid. The black screen never goes away, and the sleep indicator light always is lit, and doesn't pulse.
Many times, I've had to reset my computer via holding the power button for 5-10 seconds, which is much more damaging than a clean shutdown.
This has accumulated damage to my battery (as shown by coconutbattery - it's been draining it from 97% (after calibration) to 91% (After calibration)) and who knows how much it's done since then?
Does anyone know how to solve this problem?

After doing the hard shutdowns (holding the power button for 5-10 seconds to force quit the MacBook) I would open Disk Utility and Verify the integrity of your File System with First Aid.....
.....I would try an SMC reset to see if the sleep issues can be sorted out....look under (Power) for the specific items that the reset helps....
http://support.apple.com/kb/HT3964?viewlocale=en_US&locale=en_US

Why does the sound to my MacBook Air stop working after it wakes up from sleeping?

When I leave my headphones in the headphone jack and then close the computer to sleep, when it wakes back up the sound will not work.
It doesn't work with the headphones in or out, it is just completely disabled. I tried muting and unmuting and and toggling the volume but the only thing that works is restarting the computer.
Obviously, the sound works after restart but it is an inconvenience due to the tone on restart which is not the greatest noise when trying to work with a sleeping baby in the house (Which is why I use headphones in the first place.)
Any help is much appreciated.

Plug in the headphone and remove it
1. Reset PRAM. http://support.apple.com/kb/PH4405
2. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
Remove the logitech mouse receiver if you have one.
Update Boom, Windows Media Player and all other third party plug-ins.

Does final cut 5 work on 10.7 lion as it was but i bought a new macbook air and it won't install now ?

does final cut 5 work on 10.7 lion as it was but i bought a new macbook air and it won't install now ?
i had it work on my second gen mba but now it wont work

Hi David
I meant to say 5.1 the problem I've got is it's saying it does support ppc software but I have got the intel version but for some reason won't install from disc but if I transfer from time-machine backup it works
But then it won't read my project it's so strange just don't get it

MacBook screen goes gray and won't wake up from sleep - 10.6.2

We have a MacBook Alum running 10.6.2 with 4gb ram.
We recently upgraded to 10.6.2 from Leopard and this issue started to happen.
It seems that as the MacBook goes to sleep or goes to the screensaver mode, the screen goes gray and won't wake up from sleep or screensaver mode without a hard reboot.
Is Apple aware of this issue? It did not happen with the previous version of Leopard. This issue arrived when we upgraded to Snow Leopard. Other than the sleep issue, SL is rock solid. Kudos to Apple for producing a great OS!

Hi GrooveDaddy,
Have you contacted AppleCare via telephone to make them aware of this issue? It definitely doesn't sound like normal behavior. What sort of troubleshooting have you done so far on the issue? What sort of settings do you have on your screen saver? Password protected? Custom iPhoto slideshow?
What if you manually sleep the machine by closing the lid or engaging it via software (via the Apple menu) does the screen have the issue in both scenarios?

Just bought a new macbook air, how can i install my iphotos from my mac desktop to the air

just bought a new macbook air, how can i install my iphotos from my mac desktop to the air
Bill

Connect the two Macs together (network, firewire target mode, etc) or use an external hard drive formed Mac OS extended (journaled) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
LN

My early 2008 MacBook won't wake up from sleep

My early 2008 MacBook won't wake up from sleep periodically. I will have to hold the power button down and then restart when it acks up. It did this twice yesterday & once today.

Try resetting the PMU (power management unit).
Remove battery and power adapter.
Hold down power button for 10 seconds.
Reinstall battery and attach power adapter.
Hold down Command-Option-P-R, a total of four keys, and press power button. Don't release the keys.
Continue holding the four keys until you hear the startup sound twice, then release.

MacBook won't "wake" up from sleep, when being folded

When I "fold" computer it goes to sleep. But, when I flip up the screen again, my Mac won't "wake" up from sleep mode anymore.
Do anyone know how to fix this problem?
BR
Christian
I have a MacBook 2.26 GHz Intel Core 2 duo, Snow Leopard 10.6.8.

I've solved my problem.
I have reset my MacBook's PRAM settings.
It's very easy: link: http://support.apple.com/kb/HT1379
Resetting PRAM and NVRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Your computer's PRAM and the NVRAM are reset to the default values. The clock settings may be reset to a default date on some models.
Hope this helps
Best regards,
Christian

It won't wake up from sleep after I open it. If I close it and then open it, it doesn't wake up for at least 5 minutes.

just upgrade my macbook air to yosemite. now when i physically close the computer and open it back up, it won't wake up from sleep mode. I tried pressing the power button, but it wouldnt turn on. Then once it somehow turned on by itself, I tried a PRAM and SMC reset. Then I tried closing and opening the computer again and I still had the same problem. nothing has worked. when i do get the computer on, i randomly goes into sleep mode again. I've check the settings for display and it says after 45 minutes of nothing it will sleep.

Step 1
Take all the applicable steps in this support article. That's the starting point for any further efforts to solve the problem. Please read the whole article carefully (some of it is hidden by disclosure triangles) and don't skip any of the steps, including the ones under the heading "Additional troubleshooting." If you don't understand any of the steps, ask for guidance.
Step 2
If you're running OS X 10.8.5 or earlier, from the menu bar select
           ▹ System Preferences... ▹ Accessibility
If the checkbox at the bottom marked
          Enable access for assistive devices
is checked, uncheck it and test.
If you're running OS X 10.9 or later, select
           ▹ System Preferences... ▹ Security & Privacy ▹ Privacy ▹ Accessibility
If any applications are listed on the right and have a checked box next to them, uncheck all the boxes and test. You may first have to click the padlock icon in the lower left corner of the window and authenticate as an administrator to unlock the settings.
Step 3
In the Energy Saver pane of System Preferences, uncheck the box marked
          Put hard disks to sleep when possible
Step 4
This and the next step must be taken as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that heading, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You may see one or more reports with a name that begins with "Sleep Wake Failure" followed by a date. Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
Step 5
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ Diagnostic and Usage Messages
In the search box in the window's toolbar, enter "powerd" (without the quotes.)
You may see one or more lines like this:
com.apple.message.signature: Platform Failure
If you do see that, and you did everything in the preceeding steps, then you're dealing with an internal hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Won't wake up from sleep mode

I have only had my iMac for a couple weeks and four times now it won't wake up from sleep mode. I have to use the on/off button for a response.

Since you have a new machine, I would call Apple immediately and have them deal with the problem.

G3 Bronze Keyboard won't wake up from sleep

I have a hand-me-down Powerbook G3 Lombard 400 Mhz (bronze keyboard), with a dead main battery. It works great with the power adapter, and has just enough charge for me to move it from one outlet to another without shutting down. I'm trying to set it up for use as an Itunes server connected to my home stereo, which is fine because it will always be plugged in.
The problem is that the laptop won't wake up from sleep. This morning I noticed that the display and HD seemed to be sleeping, but the fan/processor buzzing noise was still going (there were no lights other than the little green light on my PCI card). I couldn't figure out any combination of keyboard or power key strokes that would either wake it up or shut it down. I unplugged it, waited half an hour or so, and it finally shut down. I then plugged in, hit power, and it started and booted perfectly (after the expected disk check for abnormal shutdown). Then this afternoon, the whole thing was sleeping (I think -- no sound, no lights other than PCI card light), and again it wouldn't wake up. Again, I unplugged, let it power down (waited for the PCI light do die), the replugged and it started up just fine.
Any idea what gives? Or what I do when it's sleeping? Right now, I have changed the power saving settings so that it never goes to sleep, but I'd really like to let it sleep when people forgot to turn it off...
thanks!

aldpol,
There are many causes for sleep issues and you just have to wade through them one at a time.
You can always force a Lombard or newer powerbook to shut down by pressing/holding the power button until it turns off. As you have noted, this is an undesirable process since you can corrupt the HD.
I would start the troubleshooting in this manner:
1. Unplug all peripherals (PC cards, mouse, everything).
2. Reset the power manager:
http://support.apple.com/kb/HT1431?viewlocale=en_US
3. Now put the powerbook to sleep via the Special menu, wait a minute or so, then wake.
4. If no success, restart while pressing the shift key until you see the message 'extensions off', then release. Now test sleep/wake.
If number #3 is successful, one of you peripherals is probably the troublemaker. If still having issues, please post back with more details if possible.

Does anyone know what to do when a apple mac book pro screen won't wake up from sleep?

Does anyone know what to do when a apple mac book pro screen won't wake up from sleep? I have tried to restart it and it still won't come on.

Try this, which is located in your macbook pros user manual.

X1C won't wake up from sleep mode using keyboard

Hi...so finally got my X1C today. One thing I am noticing is that the machine won't wake up from sleep mode when I press any key on the keyboard -- it only wake up by pressing the power key. This is a bit unexpected to me. Is it by design, and is there any way to change this?
Thanks for your help.
Solved!
Go to Solution.

Does it awaken from stand-by if you press the Fn key? That's been the ThinkPad standard for as long as I can remember.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

NEW COMPUTER USING WINDOWS 7 WILL NOT WAKE UP FROM SLEEP MODE. I HAVE TO MANUALLY TURN IT OFF AND BACK ON.

New laptop with Windows 7 does not wake up from SLEEP MODE. I have moved the computer, moved the cursor, pushed every key on the keyboard, moved the space bar but nothing wakes it up. I always have to manually turn the computer off and then
turn it on again. I have searched the FORUM but don't see anyone having my problem. I have searched under SLEEP MODE in GETTING STARTED WITH WINDOWS 7 but I don't find where they address the different modes. Any suggestions?

Hi, I would suggest you to check allow this device to wake the computer have a tick mark.
Here are the steps:
1. Click Start, type Device manager in the search box.
2. Go to Device manager.
3. Click on keyboard, it will display your keyboard, right click and go to properties.
4. Select Power management.
5. Check Allow this device to wake the computer.
Follow the same procedure for mouse, restart the computer and check if it works properly.
I also suggest you to update your display drivers, you can logon to the manufacturers website and download the latest drivers and install.
For more information:
http://support.microsoft.com/kb/266283
Also I suggest you to run the Power troubleshooter to adjust your computer's power settings, and check if it works properly.
Here are the steps:
1. Open the Power troubleshooter by clicking the Start button, and then clicking Control Panel.
2. In the search box, type troubleshooter, and then click Troubleshooting.
3. Under System and Security, click Improve power usage.
If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
For more information, logon to:
http://windows.microsoft.com/en-US/windows7/Open-the-Power-troubleshooter
http://windows.microsoft.com/en-us/windows7/Sleep-and-hibernation-frequently-asked-questions
If the issue persists, please collect the Power Efficiency Report for further analysis.
Guided Help: Get a detailed Power Efficiency Diagnostics Report for your computer in
Windows 7
Regards,
Leo
Huang
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

New macbook air (OS X) won't wake up from sleep

Similar Messages

Maybe you are looking for