New macbook pro 2011 weak and dropping wireless connection

Just looked throught this part of the forum and found out there are a lot of people out there which seem to have the same problem as me.
I purchased a new modell 2011 MBP on the very first day from our apple store.
At home, sitting directly beside the wireless router I didn´t noticed anything wrong.
I have got beside of the Mac OS a bootcamp Prt. with Windows 7 on it and everythign works fine so far.
Five days after purchased I started traveling on business and at present we are for some weeks in Melbourne. Were having a wireless connection in our appartement and here I have got massiv problems with my connection.
We are having altogether four windows mashines with us, my IPad, my Iphone, another HTC smartphone, and my new Macbook.
All the other devices connecting to our room wireless without problems. The net strengh is not fantastic but the other devices bringing it up to four bars on the windows wireless symbol in the task bar. None of the other computers where ever loosing the connection.
Only my macbook can not make it over three bars and its going on and off. Donwloads fail freuquently because the conection is interrupted more than one times..
In my opinion this problem is even worse on the Windows OS and a bit better but far away from beeing good and acpetable on the Mac Os.
I hope its only a driver issue and there is no hardware problem with the new mashine. Other than this I love the new notebook and I am very satisfied with its performance.

Hi,
I've noticed similar behavior - specifically with the new 2011 MacBook Pro 13 and 17" models (tested) on Cisco infrastructure - using a 1252 and 3500i/e series APs running in dual-band mode, with 5GHz preferred. I've seen the transfer rates when in close proximity to the AP move between 72mbit and 243 - occasionally 300. My 2010 system in the same position is a solid, dependable 300.
They did modify the wireless chipset in the new 2011 MacBook Pros to replace it with a true 3x3 802.11n device. Cisco have long praised the Broadcom chipsets so I will see if their wireless team can advise me on what this new gear is capable of.
I currently look after a very large deployment of wireless LAN equipment so my wireless performance is absolutely critical to my work - the 2010 system was a godsend and a testament to how wireless devices should be built. It looks to me like this could be a software issue so I only hope Apple resolves this ASAP. I'll hang on to my 2010 system for now...

Similar Messages

  • Macbook Pro 10.5.8 dropping wireless connection

    Two days ago my late 2008 Macbook Pro started dropping it's wireless internet connection. AirPort, AirPort Settings, Network Settings, and ISP are all green lit, Internet and Server are Red. If I run diagnostics, I can get it to connect for about 30 seconds berfore it disconnects. Sometimes I can just turn off AirPort and then turn it back on and it will connect, but sometimes I have to set up a new location. The menu bar shows full signal the entire time. It works if I connect with an ethernet cable. No other device in the house (2 PCs, a 2 year old Macbook Pro, and several iPhones) is having this problem. Both the laptop and router (airport express that I've used for more than a year without a problem) software were up-to-date prior to this issue.  I'm not that computer savvy when it comes to things of this nature. I have no idea what's causing this problem, but it's driving me insane.

    Yes it does for a while though at a low level  then it shows the ! no connection.  It restores to normal after a while and works normally for a varying length of time.

  • I have a MacBook pro 2011. And I need help

    hi . I have a MacBook pro 2011. And I recorded some videos on aSony camcorder and the camcorder is not comparable with iMovie. And I only nowhow to use iMovie and nothing else. So is there any movie-transferring downloadI can use so I can use iMovie?

    Have you checked all of the iMovie compatibility articles on Apple Support?
    Apple may not have tested your camera with the current release of iMovie, but it might have done so in prior versions (8 [09], 7 [08], 6 [06], 5 [05], and 4 [04])
    If your camera outputs MPEG-2, there's a solid chance that iMovie 9 will properly read its data, as has happened in the case of one 2007 Panasonic SDR-H18 that was not listed past iMovie 6 (this is my own grandmother's camera, which was only supposed to work with some cheap-as-dirt compositor, from a no-name in Japan that pushed its wares also to Fujifilm, JVC, and Olympus). In '09 my grandmother and I went out for Snow Leopard.  I installed it without delay, but the Panasonic compositor would frequently crash while previewing a clip post-upgrade.  After getting a big runaround from the phone techs, one of them dropped the iMovie hint.  A bit more digging through the Apple boards (right here) pretty much sealed things up.  The camera worked then, and still works today.
    As to other formats, I don't know.  Best I can suggest is to give your camera a go at your new Mac (or the other way around).
    Nate  

  • I'm buying a new Macbook Pro this week and am wondering what is the best way to copy over the software I have from my existing Macbook Pro to the new one? eg. Photoshop and Office etc. I no longer have the CDs.

    I'm buying a new Macbook Pro this week and am wondering what is the best way to copy over the software I have from my existing Macbook Pro to the new one? eg. Photoshop and Office etc. I no longer have the CDs.

    Ya know what I'm on a brand new MBP just about 24 hours old and you know whats been working amazingly for me. I have a 27inch iMac as well and i've just connected it to my network and been dragging files and apps across the network onto my new MBP. Its really working fast and its flawless. You could always do that option, Just go into sharing options and turn them on for both Macs. Then just click and drag. Of course they have to both be on the same network for this to be possible.
    Look at my network.
    Shared is what your looking at.  I click on there see all my computers files and then drag the ones i want form its folder to my MBP folders.  Hope that helps if your looking for a very simple way on a wireless network.

  • Unable to watch Adobe Flash / YouTube - OS X 10.6.6 - New MacBook Pro 2011

    Hello,
    I'm new to Mac family.
    I recently got new MacBook Pro 2011 15" model. However I'm unable to watch videos on YouTube. It shows Adobe Flash Player is out of date. My MacBook Pro software up to date. I tried to download and install latest version of Flash Player from Adobe website. Installation went successful, but nothing works.
    I tried on both Firefox and Chrome builds too. I even restored MacBook Pro to default settings. I'm just wondering, whether Mac supports Adobe Flash Player at?
    Any further help would be greatly appreciated. Thanks.

    Does anyone else have a solution to this issue that does not involve doing a fresh install of Snow Leopard? That solution is not acceptable to me.
    I did a system migration from a Time Machine backup when I purchased my new 2011 MacBook Pro last week. All my applications seemed to be working normally until I attempted to watch a YouTube video in either Safari or Chrome. In both browsers, all I get is a black screen where the video should be playing.
    I downloaded and installed the latest version of the Flash Player for Safari and I am not able to manually update the Flash Player for Chrome since that browser keeps the Flash Player up-to-date automatically. The black screen persists when attempting to watch a video on YouTube. I cleared the site cache for the Flash Player just in case something was buggy there, but the problems remains.
    Any assistance would be much appreciated!

  • Brand new MacBook Pro 2011 got stolen

    sorry I can't find a place post this so I post this here. This unfortunate event happened yesterday. I got my brand new MacBook Pro 2011 from the apple store and I went to pick up takeout at a plaza 10 mins away. My car got broken in and my Brand new MacBook Pro was stolen. I just went to pick up take out for 10 mins only. I m wondering if there is anything that Apple can do such as tracking the serial number? I have the receipt with me luckily.
    Thanks

    i have had my macbook stolen before
    the apple store people will say you cannot do anything
    you have to call tech support, its the tech support people that will flag your serial number on your laptop
    unfortunately with you laptop only being a few minutes new, and they probably stole the whole thing with box and components you have a lower chance of ever retrieving it,
    i feel for you man, i know what it is like to get your mac stolen

  • Brand new Macbook Pro keeps crashing and restarting - Mavericks

    Hey guys, I just got a new Macbook Pro on Monday and my first time turning it on it was perfect, the next day I turned it on and kept crashing and "Restarting due to a problem", it wouldn't even make to to the log in page. Every time I power it up now I get the same issue over and over, once I make it passed the log in it is usually fine but does crash sometimes randomly but not much.
    I have read here that updating to Mavericks has caused this problem but surely when it came with it and is less than a week old it should be fine? (I'm confused as to why the report says my Mac is Mid 2012, I just bought it!!) Also the only software I have installed is Microsoft Office. I do have Silverlight Plug in installed for Netflix which I read can be an issue with Mavericks.
    I downloaded EtreCheck and this is the report I have. Please any help will be great!
    Hardware Information:
              MacBook Pro (13-inch, Mid 2012)
              MacBook Pro - model: MacBookPro9,2
              1 2.9 GHz Intel Core i7 CPU: 2 cores
              8 GB RAM
    Video Information:
              Intel HD Graphics 4000 - VRAM: 1024 MB
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 1.9 - SDK 10.9
              AppleAVBAudio: Version: 2.0.0 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    System Software:
              OS X 10.9.1 (13B42) - Uptime: 0 days 0:20:26
    Disk Information:
              APPLE HDD ST500LM012 disk0 : (500.11 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 499.25 GB (469.68 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              HL-DT-ST DVDRW  GS41N
    USB Information:
              Apple Inc. BRCM20702 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Computer, Inc. IR Receiver
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Inc. FaceTime HD Camera (Built-in)
    FireWire Information:
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Kernel Extensions:
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist
              [loaded] com.microsoft.office.licensing.helper.plist
    Launch Agents:
    User Launch Agents:
    User Login Items:
              iTunesHelper
    3rd Party Preference Panes:
              Flash Player
    Internet Plug-ins::
              SharePointBrowserPlugin: Version: 14.0.0
              FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
              Flash Player: Version: 11.9.900.170 - SDK 10.6
              QuickTime Plugin: Version: 7.7.3
              Silverlight: Version: 5.1.20913.0 - SDK 10.6
              Default Browser: Version: 537 - SDK 10.9
    Bad Fonts:
              None
    Old applications:
              SLLauncher:          Version: 1.0 - SDK 10.5
                        /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
    Time Machine:
              Time Machine not configured!
    Top Processes by CPU:
                   3%          WindowServer
                   1%          EtreCheck
                   0%          firefox
                   0%          hidd
                   0%          coreservicesd
    Top Processes by Memory:
              303 MB          firefox
              57 MB          mds_stores
              41 MB          Finder
              33 MB          Dock
              33 MB          WindowServer
    Virtual Memory Statistics:
              5.80 GB          Free RAM
              1.16 GB          Active RAM
              223 MB          Inactive RAM
              844 MB          Wired RAM
              206 MB          Page-ins
              0 B          Page-outs

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.
    If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

  • I got a new Macbook pro in March and transferred all of my old files into the new macbook from my old one. But ever since then, my iPhoto just does not open up. It says 'error' every time I try to open it, but I am still able to attach the iPhotos saved

    I got a new Macbook pro in March and transferred all of my old files into the new macbook from my old one. But ever since then, my iPhoto just does not open up. It says 'error' every time I try to open it, but I am still able to attach the iPhotos saved to emails. Help! How do I get my iPhoto back?

    Thanks, Sig.
    The old computer is a 2.6 Ghz Intel Core 2 Duo
    The new one is a 2.3 GHz intel core i7
    In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem.  Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page.  Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
    If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them. 
    (I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.)

  • I have a new macbook pro running lion and want to update the software on my ipod touch. My old macbook ran 10.4.11 and won't update - but the new computer says I have to update on the computer I normally sync on or my music will be lost. Solution?

    I have a new macbook pro running lion and want to update to ios 5 on my ipod touch.  My old macbook only has 10.4.11 and can't be updated to lion - and won't update my ipod touch to ios 5.  But the message on my new macbook pro says I have to update on the computer I normally use for syncing or my music will be lost.  Is there any solution for this?

    try exporting your iTunes libary from the old computer to the new one
    take a look at this from apple
    http://support.apple.com/kb/HT4527
    I am not sure you have home shareing with 10.4.11 but if you do it works very nicely
    Mike

  • I have a new Macbook Pro running Mavericks and safari consistently freezes. It takes several 'return/enter' presses to get to the page I requested. I have seen other comments and replies on how to fix (clear cache, clear extensions/plug-ins), to no avail.

    I have a new macbook pro running mavericks and only using Safari as my browser.  75% of my url requests are 'hung up' and freeze.  I have seen other posts and have tried to clear cache, reset safari, remove extensions, but to no avail.
    Any recommendations?

    If it works in a new user account, try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode
    Safe Mode - About

  • I bought a new macbook pro 13inch retina and sometimes the charger doesn't work properly, I dont know if its the charger or my laptop?

    I bought a new macbook pro 13inch retina and sometimes the charger doesn't work properly, I dont know if its the charger or my laptop? i always have to take the charger in or out for it to work ... -.-

    Apple Portables: Troubleshooting MagSafe adapters
    http://support.apple.com/kb/TS1713

  • I have the new macbook pro with retina and I am trying to back up with wd passport for mac and is telling me it is going to take 7days

    I have the new macbook pro with retina and I am trying to back it up, with wd passport for mac and is telling me it is going to take 7days. Any Ideas? Im afraid that means there is something wrong with my hard drive. I have verified the disk and it says everthing is ok.

    It seems to be a common problem that those drives don't perform well, at least not with Time Machine.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Post the messages timestamped from then until the end of the backup, or the end of the log if that's not clear.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into a message.
    Some personal information, such as the names of your files, may be included — edit that out, too, but don’t remove the context.

  • Hello, this might be a basic question, but how do you open QuickTime to record a new webinar? I have a new MacBook Pro with Yosemite and can only get QuickTime to appear in Finder but not actually open to allow me to record something new. Thx.

    Hello, this might be a basic question, but how do you open QuickTime to record a new webinar? I have a new MacBook Pro with Yosemite and can only get QuickTime to appear in Finder but not actually open to allow me to record something new. Thx.

    Hi Winterwilly,
    Welcome to Apple Support Communities. 
    The article linked below answers your question of how to use QuickTime to record something on your MacBook Pro’s screen.
    QuickTime Player 10.x: Record your computer’s screen
    Cheers,
    -Jason

  • Where in NYC can I buy a new Macbook Pro 2011 unibody trackpad and the tools i need to replace it myself?

    I am going to NYC in a week and I'm wondering if there is a store where I can buy a new trackpad for my Macbook Pro 2011 unibody. I would also like to buy the tools i need to replace it myself. I can't find anything when I search the interwebz.

    The problem is that when the machine is closed, it goes to sleep, and in sleep mode, all that goes on is that a bare trickle of power is used to keep the contents of RAM alive.  Networking is definitely not active while asleep.
    Now, regarding ds store's solution, that's a fairly bad idea.  If the machine is just sitting at your desk, you don't need to close it, or if you feel a need to close it you can use Kappy's solution.  (Although, it should be noted that apps like InsomniaX and Caffeine do not, as far as I know, keep a machine awake when the lid is shut.)  If you're worried about passersby seeing your screen, just activate the screen saver instead.  You could even require a password to dismiss the screen saver for added security.
    On the other hand, if the machine is being transported, keeping the lid open and the machine running is not a good idea.  The sudden motion sensor ought to protect your hard drive against damage caused by moving the machine around...  if it's working properly, and I'd rather not depend on an "if" to prevent hardware damage to the machine.  Plus, if it's in a bag and you've forced it to stay running, it could overheat due to lack of ventillation.
    So, long story short: if you're transporting it, close it and deal with logging back in to the network, and if it's on your desk, don't bother closing it.

  • New Macbook Pro (10.6.6) drops airport, "looking for connections"

    Ok, I do shope somene can help as I am getting very frustrated here.
    I just replaced my trusty ibook G4 with a new macbook pro. I have had problems with the airport connection on the macbook-- it keeps dropping the wireless network and saying "looking for connections" every second or two. I can't sync my 1st gen apple tv, and I think the problems may be related. In any case, I had the same problem on my imac G5 when I first got it-- it was completely unusable for a while, and finally a genius at the apple store gave me a fix that involved deleting some preference file, saying that the imac was constantly trying to find a stronger connection and switching between other networks I had used.
    Unfortunately, 1) I don't remember the exact fix, and 2) I have not hooked up to nay other network, so I don;t know why it would be looking. I have required it to ask for permission to switch networks as well, but I guess that doesn't stop it from looking.
    Can anyone help me figure out how to get it to stick with the assigned network & leave the others alone?
    If anyone also has any idea why the apple tv can't connect that might be different, that would also be helpful-- it's telling me I might have port 3389 blocked by a firewall, but I don't, and it was connecting earlier (though it was slow). I can't get a sync on wireless or ethernet.
    Thanks.

    Clare in Chi wrote:
    I have had problems with the airport connection on the macbook
    It might help to reset the connection settings on your Mac using these steps one at a time until the problem is resolved, recognizing that, depending on your problem, not all of these steps will make sense:
    1) Use the AirPort menu bar item to turn AirPort off, then on again.
    2) Try to select your Wi-Fi network from the AirPort menu.
    3) In the Network panel of System Preferences delete the AirPort item from the left column, then add it back.
    4) In the same panel as (3), define a new location and see if you can make that work.
    5) In the same panel, select the AirPort connection item, click the "Advanced" button, select the "TCP/IP" tab, then click "Renew DHCP Lease".
    6) In the folder /Library/Preferences ( not <yourhomefolder>/Library/Preferences), move the folder SystemConfiguration onto the Desktop, then restart your computer. See if you can now make your AirPort connection work.
    These steps may not help, but they'll only take a couple of minutes to try. Before you try these, if you have any special network settings on your Mac for things like DSL credentials, note all your network settings, because the latter steps will destroy them. If you got all the way to the last step, if things don't work any worse than before, you can trash the saved SystemConfiguration folder.
    Can anyone help me figure out how to get it to stick with the assigned network & leave the others alone?
    Open the Network panel of System Preferences, click the lock to authenticate if it's "closed", select the AirPort connection item, and click the "Advanced" button. Click on each of the nearby networks that aren't yours and click the minus sign.
    If anyone also has any idea why the apple tv can't connect
    I'm not sure what to suggest about that.

Maybe you are looking for

  • Why can't you change the .html/.htm filetype icons for Firefox?

    **Before you read this question: NOTICE I am talking about Firefox Icons on Windows, NOT ON FIREFOX BOOKMARKS/PROGRAM!!!!! Read the question then please, please visit the link so you have a better understanding of what I'm asking with this question!!

  • 2 Transport Request for a report

    Hi Experts, I am having 2 Transport requests for the same Z report (classical report). I have transported both of them to quality on after another with different modifications in both of them. Now i want to transport it to Production. I want to know

  • Help with contacts - I'm new and stupid

    Looking at the desription for the Blackberry Desktop Software gets me confused.  I downloaded the latest version 4.6 and I don't see anywhere to "Synchronize your email and organizer information (calendar, contacts, memos and tasks) between your Blac

  • Mail box freezing over last three days.  Why?

    my iPhone 5 mail box has been freezing, periodically, over the last few days.  Messages are sometimes in a frame.  I have done hard resets but the " repair" is temporary.  What is the cause and what can I do? thank you

  • Ipod nano saying my ipod is a removable G disk drive

    I have 2 ipod nanos (one 3rd Generation and other 4th Generation) when i use my 2.0 USB cable and have ITUNES open it comes up as a removable disk drive G and is a FAT32 system. How do i correct this problem. Any help would be appericated thanks.