New Macbook Pro: Airport Card Malfunctioning?

Hello-
I just bought a refurbished MacBook Pro from the Apple Store, and am having some problems with my Airport connection. Diagnostics show that the connection to my Linksys wireless router is working properly, but it is behaving as if I am out of range of the router. If pages in my browser load at all, it takes them a VERY long time. Around the house, the status bar never shows above 3 bars of signal. In fact, even if I place the computer directly alongside the router, signal still shows 3 bars strength. Page load times improve the closer I get to the router, however. And, if I connect via ethernet cable, internet behavior is normal. Did my 'new' refurbished MacBook Pro arrive with a faulty Airport card? Is there a way to test? Both my Powerbook G4 and my wife's Windows laptop are showing full signal strength in all parts of the house with no connection problems, whatsoever.
Not sure if these are clues, but upon receiving this new computer, I elected to transfer all of my files and applications automatically from my older Titanium Powerbook G4 when I was first getting it set up. I did have to change my manually-assigned IP for the new machine so as not to 'compete' with the older machine when accessing my wireless router, but that was the only thing I thought I'd have to do.
Thanks in advance for any help! I hope I didn't buy a lemon.

Just wanted to update with what appears to be my solution to this problem. Bought a new router yesterday (a Netgear Dualband wireless N), and have been up and running fine since. No more hanging, and signal strength is full from anywhere in the house.

Similar Messages

MacBook Pro Airport Card disabled

Hello to everyone,
After the reboot following the last early june updates (10.5.7, Airport Client Update 2009-001 and iLife 09) I have a problem with my macbook pro 17' late 2008 (alu) Airport card : it is disabled and can't be enabled !
The airport internal card is BCM43xx.
To solve this after a few readings (I seem not to be the only one concerned with this problem) I tryed to :
o Make again a combo 10.5.7 update
o Re-install Airport Client update 2009-001
o Create another user on the computer -> not user related
o Delete the /Library/Preferences/SystemConfiguration directory, followed with disk authorisations repairing and a reset with PRAM erase -> The Airport started, but turned disabled again after a few seconds ....
I add the wifi network is made with an Airport Extreme, nothing was changed on this side and my other MacBook Pro airport is running fine (same updates, just an older MBP).
I also tryed to have a look at the console but found no errors, I have a frequent message : +(com.apple.AirPortBaseStationAgent) Unknown key for boolean: EnableTransactions+ but that's all ...
If someone has a few more ideas please help ...
Thanks a lot
Regards.

If this can help, I solved my airport problem by doing a SMC reset of my MBP. The airport card is now detected, with the latest updates.

Macbook Pro Airport Card looses connection if not running a continuous network ping

Okay, I have a crazy issue going on.
Since I upgraded to Mountain Lion, soon after my Airport Card started disconnecting from any network and I would have to turn it off/on to get it working again and then it would die about 45 seconds later. This repeats over and over. I have found that if I run a continuous ping to something else on the network it will stay live and not disconnect. So, my Airport Card will stay connected if I run a continuous ping, but without it it will die every time. What the heck is going on? Did Mountain Lion put something in the firmware on my Airport card that is messing it up? I have done fresh installs many times and downgraded to lion and snow lepard and still the same issue. Is my Wifi Nic just dead or is this some other issues like the antenna? I have a new Wifi Nic in route from China but I want to make sure I finish running through all other possibilities before it arrives.
Thank you
Kevin Monette

I'm sure you meant to post in the appropriate forum. This area is for MBP (Original). You want MacBook Pro (Late 2008 and Early 2009) here:
http://discussions.apple.com/category.jspa?categoryID=190
1. Try typing a $ before your password, so $password.
2. Proximity to your router without walls in the way is helpful for proper signal. Proper orientation of your router is also helpful.

New MacBook Pro NVidia Card & Float

Hello,
I need some help making a decision before buying a new MBP.
Does the MacBook Pro switch to from ATI to NVDIA cards mean a kind of downgrade for using Color, as it won't allow 32 bit float?
Cheers,
Gerry

I feel sure that the lack of support for Nvidia cards will be addressed sooner rather than later.
Or they will avoid the issue and include software based rendering and make it GFX card agnostic....
Either way, the new machines are just so pretty, how could you NOT buy one.
Cheers,
Toby

2011 Macbook Pro Airport card Issues

Hi guys,
I have been having a problem with my 15" 2011 Macbook Pro. Over the last week my wifi has been malfunctioning. I will be able to succesfully connect to my WiFi for about 30 minutes, but then the signal drops. When I click on the connection reticule on the top right it says my WiFi is on, but that no hotspots can be detected. There are at least half a dozen hotspots near me.
After this, if I turn off the WiFi it will not turn back on. I have to restart my Macbook to regain connectivity. This has not coincided with any recent installations of hardware or software.
If anyone has solutions I would be very grateful. I have tried resetting my PRAM. I am about 2 months out of warranty. So, if this does require service I would appreciate any estimates on the cost.
Thank you!
Ryan

Your router is likely fine.
You should first update the Airport firmware for it, simply run the Airport and Software update.
See this
http://support.apple.com/kb/TS3802
And then go to your System Preferences > Network > Advanced > TCP/IP and for IPv6 turn : OFF
Reboot and see how that goes.
When you connect to the router it gives you a lease on a IP address, if your computer's time and date are off this could make the lease expire and you connect and then get disconnected. So check that, see if it holds.
Reset your SMC and NVRAM/PRAM
http://support.apple.com/kb/HT1379
http://support.apple.com/kb/ht3964
Go to your <home> /Library/Preferences and drag the
com.apple.systempreferences.plist
file to the desktop and reboot, it will be rebuilt, hit your Sytem Preferences and reset them.
drag the useless file on the desktop to the trash.

Brand New MacBook Pro Cannot Connect to Airport Express

Hi all,
Been reading through these pages and I think there are many others with the same problem as me but with no real answer, I thought it wouldn't hurt to ask anyway.
I have an Airport Express which I bought a couple of years ago. It initially worked fine on my old MacBook, I moved house and then it stopped working (flashing amber light syndrome). I got so fed up with it that it has been languishing in the loft ever since.
After a brief stint with a Windows laptop I decided it was time to return to Apple, and I haven't regretted it for a second.....until I got the Airport Express from the loft!
It simply, fundamentally and irrevocably...doesn't work! It's plugged in, amber light flashes but my nice new MacBook Pro just doesn't even recognise it exists. I have tried running the setup utility but at the first screen I am told that no unit is detected, I'm then told to check my Airport card (I assume it means the inbuilt modem which clearly works as I am writing to you guys now!). I can't even progress with the setup after this.
I have tried each of the Airport setup utilities to no avail (lap top cannot "see" AX).
Just as an update, I just connected my AX to my wireless router with an ethernet cable, a new network called 6ad16d appears to be available. Airtunes then works and I can connect to the internet (albeit slowly). I am not happy with this arrangement though as there is no padlock next to the new Apple network so I am worried that it isn't secure and surely I should be able to just plug my AX into the main and my hifi and it should work anyway?....just like it used to!
My apologies for the rambling post and please excuse my lack of computer knowledge. I really hope someone can help!

Fixed! You jut need a girlfriend with a lot of determination....not even sure she knows how she did it. Involved a lot of menus and a lot of swearing.
Surely this should be easier?!

New Macbook Pro won't work with Snow Airport

I am trying to connect my new Macbook pro with an old airport snow.
The macbook can see the airport's network, but everytime I try and connect to it there's an error.
I can connect to the airport via the ethernet, but if I try to use the assistant for the snow/graphite models it says i don't have a airport card installed. Which I do.
Is it possible to connect my new macbook with this older airport. Or is my computer to new for this old wireless router?
Any ideas??

Thanks for the input. Yes, I've driven the 23" with another Mac. I took the laptop back to the shop today. Hopefully they can resolve the issue.
Macbook Pro Intel Duo Mac OS X (10.4.8)

Airport Snow compatability with new MacBook Pro?

Hi
I was given an old Airport (one of the originals) "Snow" model and was wondering if there is an imcompatability issue with the new MacBook Pro laptops and their modern Airport Extreme Cards with the older basic Airports?
Anyone know if this is the case?

No.
An 802.11g (Extreme) client should be able to connect to a 802.11b (original Airport) base station.
iFelix

Airport Management Utility on new MacBook Pro does not see base station

I have an old "flying saucer" Airport base station. I
recently started using a new MacBook Pro. Airport
connection is fine, Airport Admin Utility works normally,
but Airport Client Monitor 1.0 shows blank graphs and
Airport Management Utility 1.0 does not "see" the
base station. I don't know if the problem is the
change to Tiger, to Intel, or to AE card. MacStumbler
and friends also are "blind".
MacBook Pro Core 2 Duo Mac OS X (10.4.8)

Try rebooting the airport, then going to airport utilities and go thru the set up proceedure following the prompts. Also go to system prefernces in location select automatic.

I purchased a new MacBook Pro, and a 2TB AirPort router. I have a 2007 24" iMac that I have been syncing my phone on for years. Is there a way to network these 3 devices so I can sync my phone on my MacBook and access the iMac data?

I am not familiar with networking in the least. I feel like, being as it is 2015, this is not an unreasonable request. Basically, I do not make much use of my desktop iMac anymore, other than as a backup computer and to sync my phones. My primary computer is my MacBook Pro. I'd like to make my MacBook my primary computer for downloading music, saving and editing photos and images, and syncing my phones, but i'd like to do so without clogging the hard drive on the MacBook.
Basically, what I am hoping to do is network my iMac, and MacBook Pro through the 2TB AirPort, and sync my phone through the MacBook without losing all data (ideally, I'd like to be able to sync through either computer at will).
Additionally, something like 100GB of images are stored on the iMac, and I specifically purchased the MacBook with the upgrades to do image editing on, but again, I don't know how to transfer the data to the AirPort, and I don't want to slow down the MacBook by storing all of the data on the laptop.
Any help would be appreciated. Thank you very much.
-Bryan

Sure-glad to help you. You will not lose any data by changing synching to MacBook Pro from imac. You have set up Time Machine, right? that's how you'd do your backup, so I was told, and how I do my backup on my mac. You should be able to set a password for it. Save it. Your stuff should be saved there. So if you want to make your MacBook Pro your primary computer, I suppose, back up your stuff with Time machine, turn off Time machine on the iMac, turn it on on the new MacBook Pro, select the hard drive in your Time Capsule, enter your password, and do a backup from there. It might work, and it might take a while, but it should go. As for clogging the hard drive, I can't say. Depends how much stuff you have, and the hard drive's capacity. As for moving syncing from your iMac to your macbook pro, should be the same. Your phone uses iTunes to sync and so that data should be in the cloud. You can move your iTunes Library to your new Macbook pro
you should be able to sync your phone on your new MacBook Pro. Don't know if you can move the older backups yet-maybe try someone else, anyways,
This handy article from Apple explains how
How to move your iTunes library to a new computer - Apple Support''
don't forget to de-authorize your iMac if you don't want to play purchased stuff there
and re-authorize your new macBook Pro
time machine is an application, and should be found in the Applications folder. it is built in to OS X, so there is nothing else to buy. double click on it, get it going, choose the Hard drive in your Time capsule/Airport as your backup Time Machine and go for it. You should see a circle with an arrow on the top right hand of your screen (the Desktop), next to the bluetooth icon, and just after the wifi and eject key (looks sorta like a clock face). This will do automatic backups of your stuff.

Internet problem with New Airport Extreme base and new Macbook Pro

So I bought a Airport Extreme base station with my new Macbook pro.
My desktop system uses a DSL modem which is connected to my computer via an ethernet cable. It works flawless. I can also unhook the hard ethernet connection from the desktop and connect it to the Macbook Pro with no problems.
I then connected the ethernet cable from the DSL router to the WAN port on the Airport Base.
I have no problem gettiing the Macbook pro to set itself up on the Airport Network. I can NOT, though, access the internet. I even tried to type in the IP address for the DSL modem while connected to Airport base and can not connect to modem. Does anyone have any advice? Is there a bridging function in the Airport Base that has to be activated?
Another question. If I replace my current DSL Router with a wireless router, do I even need the airport base if all I want to do it connect to the internet with the laptop?
Thanks,
Danny

I have no problem gettiing the Macbook pro to set itself up on the Airport Network. I can NOT, though, access the internet. I even tried to type in the IP address for the DSL modem while connected to Airport base and can not connect to modem. Does anyone have any advice? Is there a bridging function in the Airport Base that has to be activated?
Make sure you perform a complete power recycle when switching network components.
Modem/Router Power ReCycling
- Power-off the DSL modem & AEBS. (Wait at least 30 minutes. If possible, leave the modem off overnight.)
- Power-on the DSL modem; Wait at least 30 minutes.
- Power-on the AEBS; Wait at least 5 minutes.
If that doesn't resolve the problem, and your DSL ISP requires PPPoE for connectivity, you will need to set that up on your AirPort Extreme Base Station (AEBS) as follows:
Connect your computer directly (using an Ethernet cable) to the LAN port of the AEBS, and then, using the AirPort Admin Utility, check these settings:
Internet tab
- Connect Using: PPP over Ethernet (PPPoE)
- Account Name: <ISP account name>
- Change password: <ISP password>
- Always stay connected (checked)
- WAN Ethernet Port: Automatic
Another question. If I replace my current DSL Router with a wireless router, do I even need the airport base if all I want to do it connect to the internet with the laptop?
No, the AEBS will no longer be required.

Hi, I just bought a new Macbook Pro 15" with SSD 256 Gb and its almost a brand new a while ago i was trying to connect to my home wireless network it said that your airport is not configured then I restarted the system but it didn't restart it shows the "

Hi,
I just bought a new Macbook Pro 15" with SSD 256 Gb and its almost a brand-new (the 4th time to use the device) a while ago i was trying to connect to my home wireless network it said that the connection is timed out so i clicked the airport sign on the top it said that your airport is not configured then I restarted the system but it didn't restarted it showed the grey screen with the apple logo and the spinning wheel for more than 10min so I tried the force shutdown by pressing the power button till it switched off I waited for 5min then pressed the power button to start or boot the system and again the grey screen with the apple logo and the spinning wheel, I waited for more than 20min nothing changed, any solution please?
Your help is really appreciated"

Thanks a lot i followed the instructions for safe mode (i found out that i was pressing the C button after restarting) i did whats written there but the repair couldn't be performed so in addition i needed to re-formate the HD so i erased the volume and then repaired the disk--> quite disk utilities --> start the installation from the installation DVD.
Thanks really appreciating your help

FCE won't open on my new MacBook Pro - says I need a Quartz Extreme Card

I just bought a new MacBook Pro Laptop, and since I was having lots of hardware and software related problems with my old one, I clean installed everything rather than transferring things through archive.
Anyhow, I was initially able to register and install FCE from the original disk and then downloaded and installed all available upgrades. I opened it up, tried "Log and Transfer" to upload some video I'd shot on my Canon Vixia HFS10, and it worked fine. I saved and closed, but now, next morning when I tried to open FCE to edit my video it wouldn't open. A "Minimum System Check" came up that said "This system does not meet the following minimum requirements: Final Cut Express requires that your system have a Quartz Extreme Capable Video Card." I'm pretty sure that my NVIDIA GeForce 9400M + NVIDIA GeForce 9600 GT cards meet the requirements and that Final Cut Express just doesn't recognize that they are much better than the minimum requirements it is programmed to look for. How can I fix this? I saw another thread on a similar topic suggesting that someone delete their FCE, and then perform a clean install, but that's effectively what I've just gone through, and I'm not in the mood to spend a couple of hours seeing if the same thing I just did fixes the problem I have now. This seems like something that would be an easy programming fix, probably a simple modification to a preferences file, but I wonder if anyone out there has the solution?
Message was edited by: nate.andersen

No, I have FCE 4 - should have said that - and it worked on my older Intel based MacBook Pro.
As it turns out, though, I think I've solved the problem, adapting a solution to a related problem I found on MacRumors.com. Don't know why this is necessary, but here's the solution I tried:
1. right click on the FCE application icon and select "Show Package Contents"
2. open the "Contents" folder and then open the "info.plist" folder in Text Edit
3. find the line that says: "<key>AELMinimumQuartzExtremeCapable</key>," and replace it with "<key>AELMinimumGeForceCapable</key>", and then make sure that the next line says "<string></string>" without any number specified. Or, if you have some other kind of graphics card that you know is compatible, you could say what that is instead of GeForce. I found it doesn't work just to delete this line completely.
Again, I don't know why Apple didn't build in this flexibility when they updated their standard Graphics cards, but in any case this solution seems to work.

If I sell my ipad can I use the SIM card with the new Macbook Pro

Hi, I'm looking at two scenarios I need help with. I still have a contract for another 12 months with EE which gives me 2gb of data monthly on my ipad mini. If I sell the ipad mini can I use the micro SIM card in a......
A) a new iPod Air
Or
B) a new MacBook Pro with Retina.

Scraggy78 wrote:
Hi, I'm looking at two scenarios I need help with. I still have a contract for another 12 months with EE which gives me 2gb of data monthly on my ipad mini. If I sell the ipad mini can I use the micro SIM card in a......
A) a new iPod Air
Or
B) a new MacBook Pro with Retina.
After researching this topic, I found the placing an old SIM card in a new iPad would be impossible. There is no way for consumers to remove the back cover... Without dropping it off a building. My best suggestion: Use the current plan up first. Then buy a new plan.

I would like to set up a homegroup with a new Macbook Pro and 2 Windows PCs. The PCs are wired to an Airport Time Machine and the Mac is wireless. All computers have internet through the Airport Time Machine.

I would like to set up a homegroup with a new Macbook Pro and 2 Windows PCs. The PCs are wired to an Airport Time Machine and the Mac is wireless. All computers have internet through the Airport Time Machine.

The method for setting up file sharing is described here:
http://homepage.mac.com/rfwilmut/notes/sharing.html

New Macbook Pro: Airport Card Malfunctioning?

Similar Messages

Maybe you are looking for