New macbook pro can't find wireless printer

I have an HP1320nw, configured to run wirelessly through a linksys E1000 wireless router.
my wifes windows box can print to it ... and I can print to it via USB. But when I try and add it as an IP printer, my mac can't see it.
also ... A ping on the windows box works ... a ping on the mac times out
any ideas ?

If the Ping from the Mac times out then that explains why the Mac does not see the printer. But note that you never see a printer when adding it via the Add Printer > IP pane. A printer will only be seen if it supports a broadcasting protocol like Bonjour and if it does it will appear in the Add Printer > Default pane.
So working on why the Mac cannot ping the printer, the most likely is the Mac is set to a different subnet to the printer. If you make a note of the IP address used by the Mac, the PC and the printer, they should all be set to the same IP subnet. For a home network this is typically the first three sets of numbers in the IP address. The last number is known as the network address, and each device must have a different network address.
So if the PC and printer have an IP address of 192.168.1.x, where x is the individual network address for each device, then the Mac must also be set to 192.168.1.x.
The other thing to check is the Gateway / Router address. This will be the IP address of the Linksys router and this should also be set in the Network settings on the Mac.
If the Mac is correctly set then are you able to ping the Linksys router or the PC?

Similar Messages

  • New MacBook Pro can see my wireless printer

    Just got new macbook.  It is connected to the wifi network (can see the internet etc).  I have added the printer in via the preferences pane using a cable so that I could see the printer.  It printed via the cable.  Took the cable out, can still see the printer in the preferences pance (I set it up as default) BUT macbook can't find the printer to print to it.  What have I not done???  Or what have I done wrongly????? 
    Teresa

    Hello, tencko. 
    Thank you for visiting Apple Support Communities.
    Here is an article that I would recommend going through when experiencing this issue.
    OS X Mavericks: Solve printing problems
    http://support.apple.com/kb/PH14142
    Cheers,
    Jason H.

  • HT2495 I have a wirless network. I connect all my computers to it and a printer. I can print wirelessly from all computers. I tried to add the printer to my new Macbook, but can't find the printer on the add printer and scan icon on preferences.

    I have a wirless network. I connect all my computers to it and a printer. I can print wirelessly from all computers. I tried to add the printer to my new Macbook, which is connecte to the network, but can't find the printer on the add printer and scan icon on preferences. I downloaded a installation printer utility from the Manufacturer (lexmark), but it didn't work. Any sugestions?
    Thanks,
    Ivette

    You would need to get the IP address of your printer then manually add a network print queue.
    To get the IP address, on the control panel of your printer, press on Setup > Network Setup > TCP/IP > View/Set IP address.

  • My new macbook pro can't find my Belkin network

    My new Macbook Pro is recognizing all sorts of newtorks in the area except the one in my home.  I have a Belkin N+ wireless router which I know is working because two other computers (pc) and my wife's iPad are having no problems connecting.  This is a frustrating start for a hesitant pc-->mac transition.  Any help will be greatly appreciated.
    Jim

    Just finished trying the suggestion from my Mac store "genius", and it WORKED.  He suggested that I connect to the router directly with ethernet.  His thought being that once my MBP found the IP address it would be able to find the network wirelessly.  While still connected I went to System Preferences/Network, selected WI-Fi and entered the network info (name & password).  There it was - connected.
    Don't know how to make this solution available to everyone with the same problem.  If someone knows how, go for it.
    Thanks to everyone who responded.  Your efforts are appreciated.
    Jim

  • New MacBook Pro can't find the base station

    I just bought a new MacBook Pro and AirPort Extreme Base Station. My house is wired for Ethernet so I plugged the Airport Exteme into one of the Ethernet outlets and did the set-up using my old iMac G5 over the network. (I had to download the latest software for the AirPort Extreme to the iMac before this would work right.) I finally got to the point where I got a green light on the Base Station, but when I search with the AirPort Utility on the MacBook Pro it can't find it, even when it is physically only 3 feet away. I then plugged the MacBook Pro into the AirPort Extreme with an Ethernet cable and it saw it - no problem. I then downloaded all the software updates to the MacBook Pro, restarted, unplugged the Ethernet and tried again. The AirPort Utility still can't find the Base Station. I am running 10.4.10 on both machines. I have 10.5, but don't plan un updating until I get this to work. I spent about half an hour listening to Muzak while trying to get to support and finally gave up. Any suggestions?

    In another Mac OS X user account. Choose Log Out from the Apple menu and log into it. If you want to move them over, drag them to /Users/Shared/.
    (65842)

  • New MacBook Pro can't find time machine

    I just purchased a new MacBook Pro and I want to restore my system from a time machine back up located on a Time Capsule.  I am attempting to do this using the Set-Up Assistant.  The process is as follows.  I select from Time Machine or other disk and click continue.  On the Select the Source screen, my Time Capsule shows up.  I click continue and on the next screen the new MBP can not find a source as there is nothing listed in the source box.  It continues to search but will not find my time capsule.  When I click the Back button, I see my Time Capsule appear for an instant before it shifts back to the previous screen.  My MBP is connected to my Time Capsule via ethernet cable and there is web access using that cable. 
    I don't know what to do.  Any suggestions will be great.  Thanks.

    You don't want to do that by copying.
    Your best bet, by far, is to use Setup Assistant.  If your Mac is running Snow Leopard, see Using Setup Assistant on Snow Leopard or Leopard.
    If it came with Lion, it's a bit different: Using Setup Assistant on Lion

  • New MacBook Pro can't 'find' my Windows notebook

    Hi, I got a new MacBook last week and I tried to transfer all my files from my notebook, which is running on windows, to it. They are both using the same WiFi connection yet I left it for ages and it still couldn't 'find' it. Does it take a long time to find other computers? Or is there another way to connect the two computers?
    Any help is appreciated.

    Hi m_dukes,
    1. Click GO
    2. Select "Connect to Server"
    3. Type smb://192.168.2.100/ <---The computers IP address or computer name that has the shared folders
    4. Hit Connect
    5. Enter login and password from your windows pc
    that's it.

  • New MacBook Pro can't find my A1314 wireless keyboard

    Any thoughts?  I've run the Bluetooth set-up assistant until I'm blue in the face, but, although it lists the keyboard as a device, it can't seem to "see" it sufficiently to pair with it. (No such problems with my much older wireless mouse, oddly!)  All thoughts gratefully received..

    Did you take a look at Apple's help docs?
    http://support.apple.com/kb/HT1809
    http://support.apple.com/kb/TS1569
    Also, did you run the "Bluetooth keyboard assistant" or the normal  "Setup Bluetooth device"

  • I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

    I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

    Hi,
    Apple's AirPrint only support specific models while using wired or wireless network connection.
    Plugging a printer into a USB port of Apple base is not supported for AirPrint:
    AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
    As well you must use AirPrint enabled printers for a such, none of your printers are AirPrint enabled:
    http://support.apple.com/kb/ht4356
    There are 3rd party solutions which allow sharing a printer connected to your Mac as AirPrint, Printopia as example provide a such:
    http://www.ecamm.com/mac/printopia/

  • I am in an internet cafe and my macbook pro can't find the wireless network available here. I have used this network before. I have restarted my machine several times too. help please

    I am in an internet cafe and my macbook pro can't find the wireless network available at the cafe. I have used this network before. I have restarted my machine several times too. help please

    Change your router channel.  Sometimes this is all you will have to do.
    Power cycling the router.  Read the router's user manual or contact their tech support for instructions.
    System Preferences/Internet & Network/Network
    Unlock the padlock
    Locations:  Automatic
    Highlight Airport
    Click the Assist Me button
    In the popup window click the Diagnostic button.
    System Preferences/Network- Unlock padlock.  Highlight Airport.  Network Name-select your name.  Click on the Advanced button.  Airport/Preferred Networks-delete all that is not your network.
    Place a check mark next to "Remember networks this computer has joined."  Click the OK button and lock the padlock.  Restart your computer.
    http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
    No internet connection (wireless)
    Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
    Delete all extra entries that you find.
    Place a check mark next to "Remember networks this computer has joined."
    Other resources to check into:
    http://www.netspotapp.comNetspot
    How to diagnose and resolve Wi-Fi slow-downs
    Pv6 troubleshooting
    Mac OS X 10.6 Help:  Solving problems with connecting to the Internet
    What Affects Wireless Internet?
    Solutions for connecting to the Internet, setting up a small network, and troubleshooting

  • Macbook Pro can't find Wifi after closing

    I moved house and got a new wifi provider. My Macbook Pro can't find it sometimes after I close my Macbook which forces me to restart for it to join the network automatically. SOMETIMES I get a popup window with networks that it picks up and SOMETIMES my network is listed and I can select that, but not all the time. Why cant my Macbook find my network sometimes? It can find everybody elses except mine!

    Wi-FI connection drops
    Wi-Fi Problems in OS X Yosemite
    Wi-Fi Problems in OS X Yosemite (2)
    Wireless Diagnostics
    Also try turning off Bluetooth.
    Troubleshooting Wi-Fi issues in OS X
    Wireless Connection Problems - Fix
    Wireless Connection Problems - Fix (2)
    Wireless Connection Problems - Fix (3)
    Wireless Connection Problems - Fix (4)

  • My macbook pro can't "find" my disc (?!)

    I've just got the sims 3 island paradise and I've inserted the disc my macbook pro can't "find it". It asks me to insert the disc for me to be able to play when it's already in!? Why? Please help!!

    Call AppleCare (1-1800-APL-CARE) and give then the serial number.  They will send you a new copy of the two disks for shippingand handling of $16 each (I think $16 each).

  • MacBook Air can't find my printer

    Let me preface this by first stating that I am not technically savvy.  Turning a computer on and off is about it for me. So I just purchased the HP 6835, took it out of the box and have been attempting to set it up.  Everything appears to work fine by my Macbook Air can't find the printer.  I've been trying to get this to find it for hours, reading almost everything. I then looked at the box it came in and it reads on the box that this Printer Supports OSX v10.9 Mavericks. My Macbook Air is running OSX Yosemite v10.10.3, is this why my Macbook can't locate the printer?   If this is not the answer, any ideas would be great.   Thanks, David  

    The printer shows up as its own wireless network in the list of networks
    It shouldn't.
    OS X: Connecting a Wi-Fi printer to your Wi-Fi network

  • Can I turn new MacBook Pro can turn like server

    Can I turn new MacBook Pro can turn like server

    There are many Server features already built into your mac.
    What did you wnat to Serve? {shared files, shared printers, shared Web pages, shared Address Book shared calendars, other } ??

  • New Macbook Pro Can't See Other Macs

    My Powerbook and iMac can see each other over the network and do file transfers, but my new Macbook Pro can't. The other computers show up in Bonjour Browser, but when I try to connect to them (either via their computer name, e.g. my-computer.local, or by ip) it can't. It tells me the address is wrong. It can't even ping them, and they can't ping it. It's weird because I can access both the internet and the router settings.

    After I did that Airport stopped working. The menubar icon said "Airport not configured" and there were no network interfaces in System Preferences. So I tried just putting the airport prefs back, and restarting. The same thing happened, so I had to put the whole folder back where it was.

Maybe you are looking for

  • Asset Year end Closing AJAB

    Hi , We are facing issues in year end closing when executing t code AJAB.When spool is checked it gives the asset no with error message as asset is incomplete. When analysed the error using T code AUVA, it states that some field is incomplete, may be

  • Copyallurls ctrl+alt+c shortcut no longer working

    After upgrading from Firefox 30 the shortcut ctrl+alt+c to copy all urls no longer works with the extension copyallurls. However, copying all urls still works if I use it from the edit menu or right click menu (it adds entries in those locations). Us

  • Error Importing IDOCs in SM58

    Hello, I'm trying to import an IDOC by RFC with a RFC user with few permissions. The Idoc stills with error in SM58 transaction with message "You're not authorized to send IDOCs of message type ORDRSP"... If a press F6 to "in theory" reprocess the me

  • Icm/host_name_full

    How to set this parameter in SAP profile for web dynpro URL setup ..... icm/host_name_full

  • Drilldown Navigation

    Hi, I have a pivot table that drill down from 5 items. The last level is ID, I would like to link this last level with another report passing the ID as parameter. The field ID is not pulled in the report items, but the hierarchy is defined and this i