New macbook pro, can't get past country selection in set up.

What am I missing? I'm new to using Apple laptops. Just out of the box, I plugged it in and when I get to the "Welcome" screen it asks what country... I select US and hit enter/return and get a tone. The arrow buttons do not allow me to do anything either.

Same here... Anyone else having the same problem, use zimzo2's instructions: (use TAB key to cycle through the options then SPACE key to select and get past that screen)
The "return/enter" key and trackpad tapping didn't work for me either. Thanks for posting the solution here.
Update: Just realized that I was tapping and double tapping the MBP trackpad when you need to use the lower-corner of the pad to click. (I'm used to the separate trackpad that accepts tapping anwhere... whoops.)

Similar Messages

New MacBook Pro, unable to get past the select your country screen during initial setup.

I purchased a new MacBook Pro last night and am unable to get past the initial setup screen where you select your country. The mouse will move around, but won't actually allow me to click on 'continue'. I've also tried the keyboard commands to move to the next screen. Nothing...

I just experienced this, and I am recording the solution here for posterity. I got through the setup using the keyboard (tab to move between controls and space to select), thinking that the mouse click would work when I got through it. But I was dismayed to find that it did not ...
... at least so I thought! But actually, you have to push down the mouse pad, NOT just tap it. You can turn on tap-to-click later, but at the start you must push it until it audibly clicks. It is not obvious if you are used to Windows laptop mouse pads like me, where tap-to-click is the ubiquitous norm.

I have a new Macbook pro, I cannot get past the country selection screen. 'Continue' is greyed out and keys just make error sounds. How do I move it on?

I have a new Macbook pro, I cannot get past the country selection screen. 'Continue' is greyed out and keys just make error sounds. How do I move it on?

sideeque wrote:
I have the same problem. What did you do last time?
What should I do now? Its around 40 miles away the apple store? Would they pay my taxi fare to go and return?
How can we trust this apple product?
You are still under warranty. Call Apple Care.

My new MacBook Pro can't get an update of iPhoto at the app store

I bought a new MacBook Pro last week and see that the App Store has an update of iPhoto. However there is an error message that says"You can not update this software since you have not owned the major version of this software". I assumed that by purchasing the macbook that I DO own the major version. Any ideas? This must be an error. I have registered my MacBook with Apple with a valid Apple ID. Thanks for your help.

iPhoto updates through 'software update', not the App Store.

Brand new MacBook Pro doesn't get past grey screen (with spinning gear)

Hello,
I'm a new Apple customer - I bought a new 15" MacBook Pro during the Black Friday sale last week. Since purchase, I've installed the software I needed (Office, CS4) and have used it to browse the web and write emails.
Today when I tried to use it, I simply got to the grey screen with the Apple logo on it and the spinning gear device underneath - got absolutely no further.
I have done the following (running from mains adaptor - but the battery indicator is reporting 7 lights anyhow):
1. Boot from the OSX Install Disc, and run the disc repair utility. It reported no problems found. Restarted... same problem.
2. Boot holding down SHIFT to go into safe mode. Underneath the spinning gears, a progress bar filled up to 100% and then disappeared; leaving the grey screen, logo, and spinning gears. Nothing further.
3. Boot holding Option, P, R as per the manual to reset the PRAM. According to the manual there should have been a chime/beep - there wasn't. It just sits on the grey screen, logo, spinning gears. Nothing further.
Right now I've got a £1300 MacBook Pro less than a week old and it appears to have just packed up.
Am I missing anything here, or should I just return it?
Thanks,
Chris

Definitely take it back!
My friend bought a new iMac from the Regents St. store a few weeks ago, just before the update to the new models came out, and after a week she couldn't get it to boot. I felt very embarrassed as I had persuaded to her to switch to Mac after years of PC woes, so a broken mac after a week didn't look do me any favours. The genius guys didn't mess around, they took back the dead one and gave her a new one, this time she got the new version, they also threw in iWork free as a good will gesture. New one is running fine.
If you haven't already got Applecare, I highly recommend buying it within the next 12 months. I have needed it on a couple of occasions after the standard warranty ran out and the tech support has been brilliant, got me working again no quibbles.

Hi! I've got CS3 Design Standard - the actual disks and Software License certificate. It was installed on my laptop which crashed and could therefore not be uninstalled. I have now installed it on my new MacBook Pro, but cannot get it registered with the

Hi! I've got CS3 Design Standard - the actual disks and Software License certificate. It was installed on my laptop which crashed and could therefore not be uninstalled. I have now installed it on my new MacBook Pro, but cannot get it registered with the serial number. Is it because it wasn't uninstalled on the previous laptop? What to do now?? Thx!

Maybe this can help someone else... I simply had to properly uninstall CS3 and reinstall it again after that. I think that sorted it! I also remember having a similar issue with Macs at work a couple of years back. Not sure whether the same applies to CS5/CS6. Here's a link on how to properly uninstall CS3 on Windows XP, Windows Vista and Mac OS. I'm on OS X 10.9.2 but it worked just fine. Remove Creative Suite 3 and CS3 products

Brand new MacBook Pro can't handle 720p Video in iMovie?

Well, my Black 2.0 GHz Core Duo MacBook has been replaced by the new 13" 2.26 Core 2 Duo MacBook Pro (I had to pay the difference) and I had it upgraded to 4GB of Ram and a 320GB Hard Drive!
I use a Kodak z1085 IS Digital Camera that records videos in 720p quality. When I import them into iMovie '09, I get this message:
This is the same thing that I got on my Core Duo MacBook. If I did not optimize the video, it would play choppy and could not keep up. On my new MacBook Pro, I still get this message saying that "my computer can't handle it." I can undersatnd my old Core Duo MacBook not being able to handle it, but when a brand new $2000 MacBook Pro can't handle 720p video, somthing has to be wrong here.
Are there cretin specs that indicate what computer can handle what? I'm guessing that this MacBook Pro CAN handle it, but why am I still getting that message? Do I need a $10,000 Mac Pro Tower system to make it happy?
Can anyone please explain this and help me out?
Thanks,
Scott

+Well... for starters, the 2.26GHz MB Pro is not a $2,000 machine.+
Sorry...$1.5 thousand. Still too much for a brand machine that isn't "powerful enough" to run software that came out before the computer did.
+For all intents and purposes, it's an entry level notebook (despite the name "Pro")... with only slightly higher specifications than the white MacBook.+
So its only slightly better then the model that can only handle solitaire or any other basic application? I find it odd Apple would include iLife if these machines can't handle all of the features that they are supposed to. Pro means professional. that means this machine should be able to handle PRO applications like Final Cut, etc. But how can it if it can't even handle iMovie! Not to mention they screwed us out of using the old version...so I am stuck using this version!
+I'm not exactly sure what you mean when you say your black MacBook was replaced by a new 2.26GHz machine... but you had to pay the difference... It sounds like you were perhaps having problems with your MacBook and Apple allowed you to upgrade to the newest version paying something additional. If that's the case, it sounds like they were very generous as you had a first gen MacBook that was about three years old.+
Yes that is exactly what happened. My Black MacBook had many issues. I sent it in for repair three times and even took it to an Apple store when I was on vacation. (don't have any apple stores where I live) All of these repairs did not fix the problems and they kept on coming! So they offered to just replace it. But they don't sell the Black MacBook anymore. Only the white...and I don't like the white (thats why I bought the black!) so that is when they offered me the MacBook Pro if I paid the difference. In which I did. So that is how I got my new MacBook Pro.
+Are you saying that your video plays choppy on your new machine... or just that you get the message stating that it may play poorly?+
Both....It shows that message, and does play somewhat choppy. Not as choppy as the old MacBook though.
Like I said, I'd just like to know what Apple calls "good enough" so it doesn't display that warning.

How can I set up multiple spaces (desktops) on my new MacBook Pro 10.9.5? I have six set up on my other computer MacBook Pro 10.8.5 but can't find how to do it on this new one. Would appreciate help on this. Cheers.

How can I set up multiple spaces (desktops) on my new MacBook Pro 10.9.5? I have six set up on my other computer MacBook Pro 10.8.5 but can't find how to do it on this new one. Would appreciate help on this. Cheers.

It's not completely obvious. What you have to do in Spaces is to position your cursor to the upper right of the screen, after which faint + (plus) sign appears in that area. Click that, upon which another Desktop will appear.
The + may be difficult or impossible to see with some desktop backgrounds (black, for instance):

My macbook pro will not get past the gray screen with the apple logo and a loading bar.

My macbook pro will not get past the grey screen with the apple logo after attempting to load for hours. I have already tried resetting the NVRAM/PRAM and a couple other tricks and no luck. Anyone out there have suggestions for my problem? Help would be much appreciated since i use my computer for everything at school and i am in desperate need to get this baby working again.

You didn't say which OS in your tag, but maybe you might find something here.
http://support.apple.com/kb/TS2570
http://support.apple.com/kb/PH4191
http://support.apple.com/kb/PH7213
http://support.apple.com/kb/HT4125
http://support.apple.com/kb/HT2213

Can I turn new MacBook Pro can turn like server

Can I turn new MacBook Pro can turn like server

There are many Server features already built into your mac.
What did you wnat to Serve? {shared files, shared printers, shared Web pages, shared Address Book shared calendars, other } ??

Just got a new IMac and can't get past the welcome screen?

I'm trying to set up new iMac. Can't get past welcome screen!!

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

New Macbook Pro Can't See Other Macs

My Powerbook and iMac can see each other over the network and do file transfers, but my new Macbook Pro can't. The other computers show up in Bonjour Browser, but when I try to connect to them (either via their computer name, e.g. my-computer.local, or by ip) it can't. It tells me the address is wrong. It can't even ping them, and they can't ping it. It's weird because I can access both the internet and the router settings.

After I did that Airport stopped working. The menubar icon said "Airport not configured" and there were no network interfaces in System Preferences. So I tried just putting the airport prefs back, and restarting. The same thing happened, so I had to put the whole folder back where it was.

My MacBook Air can't get past the gray screen with the apple logo. What's the fix?

My MacBook Air can't get past the gray screen with the Apple logo, so I can't login. Does anyone know the fix for this?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Before reconnecting an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode.* The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, reboot as usual (i.e., not in safe mode.) If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see above for instructions.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it produces. Look for the line "Permissions repaired successfully" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

I have a new MacBook Pro. While getting rid of voice over I ended up with a black box with icons in it and I cannot get rid of it and I can't get off the home screen

I have a brand new MacBook Pro . I got into voice over and then figured out how to stop that but now have a black box in the middle of the home screen and that box has a bunch of icons .....(Keyboard, pointer etc) I cannot get it to close and I'm not able to go past the home screen. Help

If you click on that window, the menu bar should change to whatever program that is. Then click the program name and click Exit.
If that doesn't work, click the Apple icon, then Force Quit. Look for something that says Not Responding and quit it.
Last... if nothing else works reboot and see if that does it.

New macbook pro - can i use my old hard drive?

Have a new MacBook Pro coming tomorrow to replace to an older MBP. Everything is on the old HD and have been reading that I can switch the HDs out but would have to reinstall the operating system so all the different components from the new MBP are recognized and will be funtional. Seems pretty easy but I don't want to screw it up thinking it's too simple so I want to see if there is a good way to pull this off or another way to do this. My hope at the end of the process is that I have my files and software loaded on the old HD on the new MBP. Any tips so I don't screw it up?

gregfrombedford wrote:
The old MBP has Snow Leopard 10.6 but likely is not at 10.6.8. If I get an enclosure for the old HD can I update it to 10.6.8 if I boot the new MBP from the external drive?
Simple Run Software Update or go to the Apple download site and download the 10.6.8 Combo Update then run it. Your 10.6.x will be updated to 10.6.8. Then you should be able to connect that drive to your new MBP, either internally or by some type of SATA to USB adapter (enclosure or just an adapter), and boot the new MBP from that old drive.
Be aware that Lion does not run older PPC apps. So that is one big reason for running, installing, Snow Leopard on newer Macs.

New macbook pro, can't get past country selection in set up.

Similar Messages

Maybe you are looking for