New MacBook Pro FCPX performance

Hi all :)
Just wondering if anyone has had any experience with any of the new Retina MacBook Pros and FCPX? They have the NVIDIA GeForce GT 650M graphics cards with 1GB of VRAM ...
Many thanks,
David :)

Hi Tom,
This is what I'm dealing with at the moment... The following 2 minutes has taken the best part of an hour to render!!
That clip at the top is an optimised 1080p 50p clip which I then colour-corrected (hence why it needs re-rendering), the second line is 4 separate JPEG images (~500k each) with cross dissolves in between, and a static background JPEG (~1 MB) at the bottom. The video image is a very small insert at the top right of the frame, with the 4 JPEG images displaying like a slideshow at the bottom left of the frame.
The media is on an external FW800 7200rpm 1TB drive (80% free space), the laptop has 8GB of RAM (and ~4GB free during rendering), there are no other programs open, there is ~25% free disk space on computer hard drive (7200rpm 500GB), and the processor sits around 100% during rendering ...
Any idea why this would be taking so devastatingly long to render?
Many thanks,
David

Similar Messages

CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it. I performed a Time Machine installation from

CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it. I performed a Time Machine installation from that 2011 machine, and only Distiller and Acrobat would launch (none of the rest of the creation apps). So I ran the CS5.5 installer, uninstalled, then reinstalled, producing the same result. When I try to launch, nothing happens. What next?

Try...
Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html

I have leopard and want to upgrade to lion. I have a macbook about 3 years old and wonder if I should just get a new macbook pro ($$$) instead. Is it worth the headache to upgrade to snow leopard and then lion? How does lion perform on an intel core duo 2

I have a macbook about 3 years old running leopard. I amwondering ifitwouldbeworth the trouble to install snowleopardand then lion ($60.00) or just buy a new macbook pro ($$$$$$). How does lion perform on an intel core 2 duo processor?

I have Lion installed on a Mini with a C2D processor. The same Mini has Snow Leopard on another partition and there is no noticeable difference in operational speed between the two OS's. But compared to my new MBPro 17" with a 2.83GHz i7, the Mini running Lion is noticeably slower. So if you can afford anew MBPro, then I would get it because you will probably be unhappy with the performance of Lion on the older MBPro. The other benefit of getting a new MBPro with Lion is that if you have any Power PC applications currently on the old MBPro, which will not operate in Lion, then you still have the ability to use them. Many users got stung by upgrading to Lion, only to find they could no longer use the older PPC applications.

HDD vs SSD for new MacBook Pro and FCP editing performance

I will be purchasing a new MacBook Pro and I'm curious about performance as it relates to large FCP projects. I'm looking to hear from folks who can help me determine if a solid state drive (SSD) would be worth the extra cost. I edit large FCP projects and I'm curious if using a SSD would be the way to go. Will I get better editing performance with a SSD as opposed to the 7200 RPM HDD?
Thanks!

As a boot drive, SSDs have exceedingly last fast access times, and great data throughput rates. My Crucial SSD has a write read of about 200 MB/s. I can boot in under four seconds, and access apps, and web sites pretty **** fast.
However, beyond this, I don't see any real, substantial or dramatic gains in editing performance at all as a boot drive. I'd save your money on get more RAM, and best CPU and GPU you can afford.

New Macbook vs New Macbook Pro and Lightroom 2 Performance Increase?

I'm considering the purchase of a new Macbook or a new Macbook Pro that Apple introduced last week. I currently have an early 2007 black Macbook (2.0Ghz Intel Duo).
I'm wondering if anyone has some advice and/or experience concerning how Lightroom 2 performs on the new Apple laptops? Will the new graphics chips make a big difference on how Lightroom 2 performs?
Any thoughts / advice?
Regards,
Jody

In article <[email protected]>, [email protected]
wrote:
> Its my understanding that LR2 and especially CS4 employ graphic cards
> "better" than previous versions. If true, then new MacBook Pros with new
> Nvidia cards with dedicated video memory AND more RAM (4 gig) should be
> faster than the old models.
No surprise there, huh?!
As long as no one can provide any first-hand experiences, my take on it
is, that screen size is a very important factor.
Personally I find working in LR quite comfortable on a 1440/900px
display (MB Pro), while on the smaller screen of a MB, things might feel
a bit crammed, but that's just my impression ;-)
Cheers Martin

Sluggish (new) MacBook Pro performance

Got a new MacBook pro about 2 weeks ago.
Last week when I booted, it had trouble booting and then it did an "Internet restore" for about 30 min. The MacBook rebooted after that and since that time, has booted wel but has had sluggish performance.
For example, as I type this letter, it will respond fine for about 30 seconds, and then all of a sudden pause / freeze for 2 seconds, then catch up to my keystrokes.
Thoughts on what is causing this? I shut down all other aps and also did a clean reboot, but the behavior (across apps, including Finder) continues.
Thanks!

Thank you for the response. I tried that, but here is what I get below:

New Macbook Pro / Leopard - Choppy graphics performance, sluggish animation

I just got a new Macbook Pro Core 2 Duo 2.4GHz 15" featuring the new Nvidia 8600m graphics processor. I previously had the Core Duo Macbook Pro that had the ATi Radeon x1600.
I was expecting the new macbook to be smoother, if not leaps and bounds smoother and more responsive graphically when compared to the previous model. For example, anything animated in Leopard is choppy and staggering like Dashboard, Genie effect, scrolling web pages in Safari. It almost seems like the video card is struggling, or there are driver issues with the Nvidia chips in Leopard and they are not mature yet. Even videos in Quicktime are noticeably choppy. I have tried installing Tiger and the problems are gone, everything is smooth like it should be. I then did a clean re-install of Leopard and choppiness resumed.
Can anyone shed some light on this issue? I've been reading similar reports from others across the web and all seem to point to Nvidia driver issues that could be resolved in 10.5.2. Thanks.

I have the same problem but with my dock. For example the right side of the divider if I have a couple of windows minimized ( safari, finder) and drag a file ( text, .jpg , etc) and move it around the minimized windows move in a very jerky fashion ( to allow space for the file). I had at first just blamed 10.5 because the dock is more fancy then the tiger one, but my girlfriend owns a black macbook and her dock is about 5 x more fluid then mine ( never jerky ). I don't understand how this is possible when my macbook pro have a much better graphics card? I have deleted the plist, downloaded programs to set the dock to default settings. All with no luck.. I really hope 10.5.3 fixes this problem. I hope I have explained my situation properly . Any advice would be nice. I really don't want to have to do a erase and install!!
Thanks

MacBook Pro poor performance in relation to NVIDIA GeForce 9600M GT

Hi All who may be having similar issues.
I am now on my third replacement custom Macbook Pro 2.66GHz with 7200rpm hardrive and 4Gb of ram, and yes am so peeved that this has happened again. I am aware of the article in the 'Inquirer' about the 'bad bumps' of the NVIDIA GeForce 9600M GT in these machines and realise it is not all but from the various postings and refurbished MacBook Pro's... quite a volume!
First off i also own an older powerPC imac 1.8GHz 2GB Ram and at my work use a 3.0GHz Mac Pro with 6Gb of Ram and a 2008 imac intel 2.4GHz with 4Gb of Ram. I am fully competent and primarily use for photographic programs such as capture one, photoshop, lightroom, Aperture and these new MacBook Pro modes has failed me in so many ways
I have read many threads regarding the possible reasons for why these cards are failing or at fault, and am encountering an attitude from apple that sees this problem as unique to me. Obviously not as from when i google or go into the discussion rooms
the issue?
make sure you are on the higher performance graphics card.
simple test.. take a screen grab( of anything in safari or even of the desktop) and press fn+F11 or however you configure your keypad to go to the desktop. you may notice nothing happens.. try again.. wait. you will see a delay and the commands follow when the computer catches up.
if all my other computers i use can do the easiest of tasks why can't this? seems incredible to me!
also after installing any of the above mentioned software and beginning processing raw files(in all the programs to make sure there was no software issue) the computer becomes very hot.. i get beach balling and regular crashes.. also the fact that my computers at work seem to work amazingly well with the above software versions. To add note, all machines have up to date apple software.
In the first machine i had it got so bad the dock disappeared and spaces crashed..the track pad froze and that was it. it took forever to start up and shut down.. it appeared to work on the lower performance setting intially but over time became buggy and crashed on that side too!
these last 2 models have behaved exactly the same... all the same custom configurations i have mentioned above.But i have recognised the problem straight off and asked apple for replacements.. i am now on the third and will call them tomorrow with the same issue. I just want a machine that works smoothly and reflects the price i have paid for it.
Has anyone else experiences this? any support or advice would be deeply appreciated.. i can't keep getting dodgy Shanghi custom models!!

I read your thread Nee Kun.. and thanks, yes that is the basics of my problem, but that is just a major signal that something is seriously wrong. The screen grab is the first test to see if a new MacBook Pro computer may have this underlying issue. what i found with my first 2 models was, this issue then developed into all the other issues i have described in my original post, so its not really the screen grab i am bothered about... however annoying it is.. but the fact that these machines over time on the higher performance graphics card become disfunctional and crash periodically say every 20 min of light photography retouching and processing then there is something that is fundamentally flawed in these over priced and under tested machines. i'm not a happy bunny.
However, I have been in discussions with apple and they are listening to my issue and we are trying to resolved it, but if not... it will have to be some form of compensation as i simply cannot do any high end work on these machines that a 3yr old powerbook, 5 yr power PC imac and all all the new range of imacs and mac pro's i have access to can! it is utterly bewildering!
hmmmm... will post an update as and when.

What kind of longevity can I expect from the SSD in a new MacBook Pro with Retina Display?

Hi all,
I recently ordered a new MacBook Pro with the Retina Display. This will be both my first computer and my first Mac that uses a SSD as the primary storage device. As the title of this post suggests, what I would like to know is what sort of lifespan/longevity can I expect to get out of it? My current MacBook Pro was manufactured in 2007 and has a stock 160GB Fujitsu hard drive that has been fantastic for me over the past 4-5 years. It continues to run like a champ, and I would hope that a brand new SSD would be able to last at least that long. Given that the new retina MBPs cannot be upgraded or (easily) user-serviced, I am somewhat curious to know whether or not Apple's new proprietary SSD modules will give out/slow to a crawl before/after my new machine becomes completely obsolete. I have been searching for articles published within the past few months on whether or not the current crop of SSDs on the market are more reliable than those introduced a year or two ago, but alas, I haven't had much luck. Perhaps it is still too early to tell?
I found a few discussion threads on here somewhere where some users indicated that their original MacBook Airs, or other SSD-equipped MacBooks, were still performing quite well and responsively after a few years of use. Can anyone substantiate this for me? How long have you been using your SSD(s) in your Mac(s), and do you think the newer models will be able to last several years? I would greatly appreciate any insight.

ARealMac(PPC)User wrote:
...I found a few discussion threads on here somewhere where some users indicated that their original MacBook Airs, or other SSD-equipped MacBooks, were still performing quite well and responsively after a few years of use. Can anyone substantiate this for me? How long have you been using your SSD(s) in your Mac(s), and do you think the newer models will be able to last several years? I would greatly appreciate any insight.
While I think your concern is legitimate (it was mine too), I think to some extent, how long they last will be up to you. The individual cells in the flash media in an SSD have limited life spans, and SSD controllers have a variety of techniques to spread that wear around evenly (wear leveling). That wear is exacerbated by the controller having to erase a whole block of data when even just one page needs to be changed, and if not all the data in the block is still valid, more data than necessary gets moved (write amplification). To provide some extra room for all this reshuffling of data, SSD manufacturers build in extra space that's inaccessible to the user (over-provisioning), but it typically runs about 7%. (This is a good discussion of the inner workings of all this)
If you stuff your SSD full of files, so that there's very little room to do all this rearranging, I think you'll experience the slowdown you're concerned about. TRIM, which Apple's SSD's support, will help, but you can too. Allow plenty of free space on your SSD and perhaps partition it so that there is free space outside the partition (check this out to see what a difference it can make). You can't use it but the controller can as an extension of the built-in over-provisioning.
You also mention that you "will most likely use it to record several tracks and store my growing library of songs and videos." Why not instead use an external SSD connected via USB 3.0 for storage? They're relatively cheap, very fast, and keep the space on your internal working drive free. A BootCamp partition would also take up space, so you might consider using Windows in a Virtual Machine instead. VMware Fusion or Parallels would be installed on the internal SSD but the virtual machine files could go on the external.
In any case, your data is more important than your SSD, so back up, back up, back up.

Installation fails on new Macbook Pro

I am trying to install CS3 on a new Macbook Pro Retina 13" with Mavericks. All of the CS3 apps except Photoshop installed correctly. Photoshop fails and when I try to launch it returns a message that it cannot be initialized because the disk is not available. I have tried reinstalling it and the installation fails. I tried launching the old copy from the previous computer's disk (now in USB enclosure) and I get the same error message. I tried copying it over to the new HD without success. Tried phone support and they won't help because it's an older version. CS3 is supposed to be compatible with Mavericks. Since the older copy and the new installation return the same message, I suspect (just a guess) some software issue, perhaps prefs or other files copied over from the old installation.
Can anyone help me figure out what the issue is, and how to go about installing PS successfully?
Thanks!

Mike, that did the trick. I trashed the entire Photoshop CS3 Settings under the existing account, then created a new user and installed from there. Installation was successful. Then I went back to my existing account and it launched fine from there as well. A new Settings folder was created automatically and I'm good to go now. This was a huge relief - I was stressing. Also, I'm not sure if it's the performance of the new computer or if the prefs were the issue, but it is lightning fast now. It launches in a couple of seconds whereas on the older machine it was taking a couple of minutes. I really appreciate the help!

I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work?

I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work? I understand that using a USB port connection is not fast enough for video editing. I read somewhere the G Drives don't connect well to MacBook Pro.
thanks
larry

I doubt this can be relocated or moved so you might want to just repost in the macbook pro area.
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
Can you afford a new Thunderbolt case and cable? any case with FW800 is going to be slow 72MB/sec and less, and any new 1TB drive is capable of 75MB/s minimum up to 125MB/sec.
Thunderbolt storage can of course when setup properly reach 100's of MB higher using multiple drives.
Use what you have for a system backup or for secondary backup storage.
you might be able to take the drive - most cases allow you to open and swap drives - and use this:
G-Technology 1TB G-DRIVE mini High-Speed Portable Hard Drive
or this:
http://store.apple.com/us/product/HB137VC/A/g-technology-4tb-g-raid-professional -high-performance-dual-drive-hard-drive?fnode=5f

When should I purchase a new Macbook Pro?

I bought my current regular Macbook in March 2008.
The current specs on it is follows:
2GHz Intel Core 2 Duo
1 GB 667 MHz DDR2 SDRAM
80GB Storage (32 GB free currently)
The only problems I have with it: I have a small crack on the side where the apple logo is. I covered it up, no other issues with it. Also, I have had issues with the spinning wheel when I run Safari, but I now just use Google Chrome and no issues! I run Onyx about once a week to get it cleaned and verify/repair permissions.
It still runs fine. Not as fast as when I first got it, probably because I only have about 32GB of storage left. I am just wondering when I should purchase a Macbook Pro? I am not too familiar with my current Macbook life expectancy.
Thank you!
p.s. My Applecare warranty has been up for 2 months

JeremyJ327 wrote:
I am just wondering when I should purchase a Macbook Pro? I am not too familiar with my current Macbook life expectancy.
That is entirely dependent on your usage and needs. Friends who only use their laptops for email, Web, etc. are known to keep their Mac laptops for up to seven years, because you don't need much performance to do those things.
I use mine for graphics, so after a few years it can't keep up with the newest application upgrades. Therefore I replace mine sooner. But I still tend to keep mine for 3 to 5 years. My current MacBook Pro is the same age as yours. It is in excellent shape, and for my purposes the speed is still very good, so I will not spend money on a new MacBook Pro now. I installed a bigger faster hard drive (only $70), upgraded the RAM a while ago, and bought a new battery, because I think this machine still has another 1 to 2 years left in it.
On the other hand, if your job depended on the fast processing of HD video or raw photo files, you should upgrade to a Core i7 MacBook Pro right now. For those jobs, a new Mac might not last 2 years.

Should I buy a new Macbook Pro 13 inch or Macbook Air 13 inch?

Hi,
I was wondering if I should buy the new Macbook pro 13 inch, or keep my old 2010 1.4 C2D Macbook Air. I am not satisfied with the tiny 64GB SSD that my current Macbook Air has, because just a few weeks after I had done a clean reinstall of OSX Lion, the whole disk almost filled up. The one thing I do like about the Macbook Air, however is the speed of the SSD. Its really quick, and it boots in under 20 seconds. The Air didn't have many performance issues (other than overheating like crazy after playing a few graphics-intensive games).
If I were to buy a new Mac, my price range would be from $1200-$1500. I plan to use Garageband/iMovie frequently for making Youtube videos/school projects, and store a large music library. I also plan to do some moderate gaming and run Windows 7 in Bootcamp/Parallels. I don't plan to take it around much, but I don't want to have to weigh down my backpack in case I have to. My two options now would be the new Macbook Pro 13 inch or the new Macbook Air 13 inch. Could anyone give me a suggestion of which computer to buy?
Thanks!

I went through this same thing when I purchased my first Mac 3 days ago, also between the 13 inch MBA and MBP. I ended up deicding with the 13inch MBP, here's why:
1. More hard drive space, yes it may not be an SSD but more space is more space. I have also heard about people taking out the disc drive and adding an SSD in its place, so there would be an option.
2. The disc drive, I rarely do use it but just in case it's there and easier than carrying around an external.
3. Upgradability, I plan on keeping this Mac for a while because I spent so much on it. On a MBP I can upgrade the internal parts such as the hard drive and RAM. On a MBA everything is soldered together so what you buy is what you stick with.
4. Ethernet port, this is one that could be gotten around by an adapter but I still took it into consideration. Not everywhere has wifi yet including my work where every computer is hard wired.
5. Bootcamp, as well I plan to run Windows 7 on mine and Windows 7 takes a good amount of space so this is another spot where the larger hard drive of the MBP comes in handy. You could always have an external hard drive and run Windows 7 off of that on an Air but then you would have to have it always plugged in when you wanted to run Windows 7.
About me, I am a student so I had a lot to think about and read a lot of reviews online before I decided on my MBP but I am glad I decided on this over an Air. It may be a few pounds heavier also but in the long run for me I think the Pro will be better, I do plan on adding more RAM in the future as software becomes more memory intensive. With you're pricerange being 1200-1500 the 13inch MBP with the i7 processor may be one to look at. From Apple with their student discount, if you are one, you get $100 of plus a $100 giftcard. At BestBuy (where I got mine) the price of the i7 13inch MBP is 1,424.99 and if you're a student you get $100 off but no giftcard. I got the i5 13inch MBP because I don't need an i7.
In the end it all comes down to what works for you, but I hope I was able to help you some.

Just got a new Macbook Pro.... now what???

so I just received my new Macbook Pro with 2.4 G and 250 Gig HD which will be used for DJ'ing mostly but also email etc cause I can.....
(Side note) I have been DJ'ing for many years on an Emachine Laptop using PCDJ FX and it works great but the laptop has never done anything but run FX and has NEVER been on the internet... I bout the Mac because I got sick of watching my friends check email right before they performed and just switched over and started performing with no hiccups or issues. (End Sidenote)
but I was getting ready to load my 108 Gig of music onto it through itunes and my neighbor said your going to want to partition the drive first... and when I asked why he said he normally does a 40 Gig partition for the Mac OS, 15 Gig for Windows XP OS and the remainder would be for data that both OS's could use.
doe sthis sound right??? when I asked why mess with all that and worry about running out of space cause I guessed wrong on a partition he said it's good if there is an issue with the OS you can wipe it out without messing with your data etc...
but with good backups I don't see that as being a huge benefit either.
Comments and suggestions welcomed and appreciated.
John
oh yeah and I'm pretty clueless about Macs these days so you may have to talk slow or be threatened with more questions

Hi Weid;
I agree with you.
Don't partition unless you have to for a valid reason because you will always guess wrong as to the size.
Don't install Windows unless you have an overwhelming reason that requires it. I personally don't allow anything from either Microsoft or Symantecs on Macs for any reason. If I can't do it because I don't have their software, I don't do it. That simple.
Allan

Internet problem with New Airport Extreme base and new Macbook Pro

So I bought a Airport Extreme base station with my new Macbook pro.
My desktop system uses a DSL modem which is connected to my computer via an ethernet cable. It works flawless. I can also unhook the hard ethernet connection from the desktop and connect it to the Macbook Pro with no problems.
I then connected the ethernet cable from the DSL router to the WAN port on the Airport Base.
I have no problem gettiing the Macbook pro to set itself up on the Airport Network. I can NOT, though, access the internet. I even tried to type in the IP address for the DSL modem while connected to Airport base and can not connect to modem. Does anyone have any advice? Is there a bridging function in the Airport Base that has to be activated?
Another question. If I replace my current DSL Router with a wireless router, do I even need the airport base if all I want to do it connect to the internet with the laptop?
Thanks,
Danny

I have no problem gettiing the Macbook pro to set itself up on the Airport Network. I can NOT, though, access the internet. I even tried to type in the IP address for the DSL modem while connected to Airport base and can not connect to modem. Does anyone have any advice? Is there a bridging function in the Airport Base that has to be activated?
Make sure you perform a complete power recycle when switching network components.
Modem/Router Power ReCycling
- Power-off the DSL modem & AEBS. (Wait at least 30 minutes. If possible, leave the modem off overnight.)
- Power-on the DSL modem; Wait at least 30 minutes.
- Power-on the AEBS; Wait at least 5 minutes.
If that doesn't resolve the problem, and your DSL ISP requires PPPoE for connectivity, you will need to set that up on your AirPort Extreme Base Station (AEBS) as follows:
Connect your computer directly (using an Ethernet cable) to the LAN port of the AEBS, and then, using the AirPort Admin Utility, check these settings:
Internet tab
- Connect Using: PPP over Ethernet (PPPoE)
- Account Name: <ISP account name>
- Change password: <ISP password>
- Always stay connected (checked)
- WAN Ethernet Port: Automatic
Another question. If I replace my current DSL Router with a wireless router, do I even need the airport base if all I want to do it connect to the internet with the laptop?
No, the AEBS will no longer be required.

New MacBook Pro FCPX performance

Similar Messages

Maybe you are looking for