New MacBook Pro , not sure what the issue is.
While playing audio through iTunes, within 30 minutes or so, the sound will either stop or just start sounding really staticy and freezes every few seconds. Also iTunes sometimes just stops responding, I'll have to reboot and the same files giving me problems would work fine unitl about the next 30 minutes where other files would go through the same problem. On another ocassion, the music was playing fine unitl my screensaver hit, i woke up the laptop and the issue arose again. When this issue happens I also notice the system is a bit slow. For example my dock usually appears when i go to it, while this issue happens the dock is much slower to appear. I just got this book on 2/2/07. Im questioning my purchase. I spoke to a product specialist and they said it could be a cpu issue?
It's new, it's in warranty. Take it back. We can't help you here.
Similar Messages
-
We are trying to do a Quick payment from payment workbench and getting 'FRM-41830: List of values contains no entries' error for payment document column/field. Payment document setup looks good. Not sure what the issue is.
Already gone through following three notes but didn't found resolution.
APXPAWKB: FRM-41830 When Clicking on Payment Document LOV (Doc ID 1081305.1)
R12: APXPAWKB: Payment Document Lov Is Empty When Entering A Payment (Doc ID 857587.1)
R12: Payment Workbench Error: FRM-41830 List Of Values Contains No Entries (APXPAWKB.FMB) (Doc ID 1323875.1) -
i've already synced my itunes on my laptop with my iphone but it's not synching all of the albums/songs. Everything was purchase through itunes so i'm not sure what the issue is.
What settings do you have in iTunes? Is it set to sync all music, it is set to sync only checked songs? Is there anything different about the songs that it is not syncing. Is it possible they were they purchased with a different Apple ID?
-
I use my mac book to dj. however, i tend to get the beach ball alot. is this due to lack of memory or is it something else. ive been thinking about getting more memory but i am not sure what the issue is...i would like some advice before i go and buy more memory if it is not needed... i also do not keep my music on my lap top
Okay, so we've eliminated the lack of space since you have plenty.
See the screenshot from my Mac here:
Page ins and page outs - post those (or just post the same type of screenshot). If you have a lot of those, that means that your machine needs to keep swapping RAM around to make the best of what is available which can result in slow responses.
Also post the total amount of RAM you have (in my case, I have 12 GB)
You free RAM of 221 MB is very, very low - I'm guessing you only have a total of 2 GB. If that is the case, I would absolutely max out the machine (if you don't know how much RAM you can put in, post your model number here so we can help with that). -
Hp photosmart c6180 not printing from new imac? not sure what the problem is?
Just got a new iMac and unable to print to my HP Photosmart C6180 All - in - one. Its recognising the printer but saying its not connected? And offline? Not a clue!
Hello MacBudgie
What operating system is your Mac running (Mountain Lion)? Below is an article for troubleshooting "Printer Offline" problems. Follow it and let me know what happens.
'Printer is offline' Message Displays on the Computer and the HP printer Will Not Print
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue. -
Snap to? Smart Guides? Not sure what the issue is but it's annoying.
Just made the big step up from CS2 to CS5. Lots of changes as to be expected but otherwise a smooth transition. Nice work Adobe.
One recurring issue has got me baffled and annoyed. It appears to be a snap-to function yet I'm unable to locate the place where it might be disabled.
In my previous version of InDesign resizing window sizes and shapes was a fluid and easy motion. Now it's staggering and akward. The text and picture boxes want to snap on an unseen grid. I understand how this can be a useful function for some kinds of work but it also gets in the way of composing an image.
Any suggestions on how to disable this?
Presently, I have both Smart Guides and Snap to Document Grid UNCHECKED in the View menu yet I'm remain unable to smoothly and fluidly size my text and picture boxes.
Thanks!There's another new feature, Live Screen Drawing, that's on by default, but for many users it causes real choppiness in moving around on screen. It's at the bottom of the Interface section of the preferences. Try setting it to Delayed. That will allow you to have a live preview when you really want it by clicking, then holding for a moment before you drag, but moving immediately will give you what you are used to in CS2.
I actually think Smart Guides are worth using. They save me a TON of time. -
I downloaded an album from itunes and only half of the songs have downloaded. The rest keep trying to download, but I keep getting a message that says, "Song cannot be downloaded at this time. Do you want to retry or be done." Each time I retry, the same thing happens. They will not download. I have restarted my phone and the same problem remains.
Other people have been having similar problems with songs over a number of days.
Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting it from your iTunes library and redownload it via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
If you aren't in a country where you can re-download music or if it re-downloads in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that song and use the 'Report a Problem' link. -
I have a new ipad2. My movie download for renting just says it's waiting and doesn't download. My iPod doesn't start to play my music. Can someone help me with what to do?
App store is down. https://discussions.apple.com/message/15325169#15325169
-
I'm getting this email repeatedly. Not sure what the issue is.
A problem has been detected on this server.
============================================================
Status Summary
Reason(s) for notification:
Drives
Server:
Host : Xserve
Model : RackMac3,1
Uptime : 0 minutes
OS version : Mac OS X Server 10.4.11 (8S169)
Processor : 2 x 2300 MHz
Memory : 2048 MB
BootROM : $0005.17f2
Serial : QP5280HBSLZ
Memory:
Memory Slot "DIMM0/J11" : 512MB, ECC DDR SDRAM, PC3200U-30330
Memory Slot "DIMM1/J12" : 512MB, ECC DDR SDRAM, PC3200U-30330
Memory Slot "DIMM2/J13" : 512MB, ECC DDR SDRAM, PC3200U-30330
Memory Slot "DIMM3/J14" : 512MB, ECC DDR SDRAM, PC3200U-30330
Drives:
Drive 1 (disk3) : Normal
Drive 2 (disk2) : Normal
Drive 3 (disk4) : Normal
Drive 4 (disk6) : Normal
Drive 5 (disk1) : Normal
Drive 6 (disk0) : Normal
Network:
en0 ( active) : Normal
en1 ( active) : Normal
Sensors:
CPU 1 Power : 21.92 watts
CPU 2 Power : 19.45 watts
PCI Slots : 44.50 C
CPU 2 12v : 3.27 amps
Between the Processors : 35.00 C
System Controller Vcore : 1.71 volts
DDR IO Sleep : 2.63 volts
CPU 2 Vcore : 1.26 volts
3.3v : 3.21 volts
3.3v Sleep : 3.25 volts
CPU 2 Ambient : 34.00 C
5v Sleep : 5.07 volts
12v : 11.88 volts
1.2v Sleep : 1.18 volts
CPU 1 Core : 17.33 amps
1.5v Sleep : 1.51 volts
DDR IO : 2.63 volts
CPU 2 Internal : 49.18 C
5v : 5.02 volts
3.3v Trickle : 3.25 volts
1.5v : 1.48 volts
CPU 1 Vcore : 1.26 volts
1.2v : 1.18 volts
System Bus IO VDD : 1.47 volts
Behind the DIMMs : 54.00 C
12v Trickle : 11.94 volts
1.8v : 1.79 volts
System Controller Ambient : 40.75 C
System Controller Internal : 52.12 C
CPU 1 Ambient : 40.00 C
CPU 2 Core : 15.38 amps
CPU 1 Internal : 56.11 C
CPU 1 12v : 3.98 amps
CPU 1 Inlet : 30.50 C
CPU 2 Inlet : 24.50 C
Controls:
CPU A1 : 4011 RPMs
CPU A2 : 4021 RPMs
CPU A3 : 4019 RPMs
CPU B1 : 4017 RPMs
CPU B2 : 3990 RPMs
CPU B3 : 4017 RPMs
System Controller : 6174 RPMs
PCI Slot : 4430 RPMs
Clock Slew :
Security:
Enclosure Intrusion : NoOkay, so we've eliminated the lack of space since you have plenty.
See the screenshot from my Mac here:
Page ins and page outs - post those (or just post the same type of screenshot). If you have a lot of those, that means that your machine needs to keep swapping RAM around to make the best of what is available which can result in slow responses.
Also post the total amount of RAM you have (in my case, I have 12 GB)
You free RAM of 221 MB is very, very low - I'm guessing you only have a total of 2 GB. If that is the case, I would absolutely max out the machine (if you don't know how much RAM you can put in, post your model number here so we can help with that). -
I need help figuring out how to enable my phone to connect to my itunes after the update.
i cant unlock the phone it wont let me because the screen is so messed up, thats why i was wondering if i could do it from my computer.
-
Why does the internet on my new macbook pro not work when my old macbook's does?
Why does the internet on my new macbook pro not work when my old macbook's does? I'll have to turn the wifi off and back on multiple times to get the internet to continue to work on my Macbook Pro (running mountain lion but did it on lion also) when it runs fine on my old white Macbook (running lion). Is there something I can do to fix it or do I just have to deal with it?
Here is your fix .. I have uploaded my properly calibrated profile get it here :
http://www.megaupload.com/?d=YAJL6A9X
And it should go to your user folder/Library/ColorSync/Profiles
if you have one already you can rename either one ..
and then go to system preferences - displays - color to select the profile .
you will get rid of the blue tint while keeping correct color and gamma
This is for the newer 2010 MBP's altho if same display was used might also give good results in the previous models as well . . -
I have a newer MacBook Pro and I am trying to download my Final Cut Pro 7 Studio 2 on it. Is that possible or does the new MacBook Pro not support anything other than Final Cut Pro X?
As Tom said the FCS forum is the better place to post the question.
Here is Apple's best practices doc for installing both on the same system.
BTW, FCP7 is part of the FCS 3 suite of apps.
Russ -
I have tried rebooting phone/app. Phone is connecting to Twitter/iTunes/AppStore all fine. Not sure what the problem is. Every time I hit sign in I get "could not connect to game center server".
same problem on iphone 4s. Other people posting problems too. Must be on Apples end.
-
Firefox keeps crashing now that I have Windows 8. I have updatd my Adobe Flash and am not sure what the problem is. Very frustrating.
Hi may you please ask a new question, sclutterd, it gives us troubleshooting info. Nightly is pretty unstable anyways.
* https://support.mozilla.org/en-US/questions/new -
Right click on XP under BootCamp with new MacBook Pro not working?
Is anyone else seeing this on the new MacBook Pro? (I have the 2.53 model):
I installed WinXP via BootCamp (BC). All went well. I installed the drivers from the Leopard install disk, which seemed to have the latest everything (BC 2.1.1?).
There is a "secondary click" function under the BC control panel in Windows for the trackpad, but it doesn't work at all.
Ctrl-Click also does not work. All other clicking is fine, but it's only left clicks that are allowed.
This reminds me of my original MacBook Pro and Boot Camp beta...Three fingers and physical click. It's the same in Vista (except Vista's LAN driver works).
Eagerly awaiting the next version of Boot Camp! It's clear it was rushed, from both this and if you insert the CD and autorun (in Vista at least) it pops up with a couple of utilities for a Macbook Air.
Maybe you are looking for
-
How to set the default settings for all users in 11.1.1.3
I have couple of questions 1. How can I change the default setting for all the users so that whenever they log in the planning takes them to the Task lists mode. Or is this a one time thing which they need to do individually ? 2. How can I set the de
-
Submit in Acrobat 9.4 Reader and Lotus Notes (Yes, Another Thread)
OK, I've browsed and searched, but have not found a thing like what is going on. We run V8.0 of Notes and have a form open in Acrobat 9.4. I've tried clicking the submit button both inside our ISA server domain and directly attached to the outside m
-
How do I re-install my address book application?
While trying to import my contacts from my Hotmail account, I melted my Address Book application and had to send it to the trash. How do I re-install it? Can I re-install it? Do I have to re-install the whole operating system? Please help, I'm trying
-
How to move music into playlists?
I think my question is: How can I move songs that are in "Artists" on my iPhone into a desired playlist that already exists? I purchased a dozen new songs. I see the songs in iTunes, but when I click on my device "iPhone" in the upper right side of
-
AWE in Application Engine Error
I'm attempting to submit transactions to the AWE in an App Engine program and it's generating an error which does not get thrown if the same code is executed online. Message not found - 236, 5703, URL not set (236,5703) PTAF_UTILITIES.Portal.portalUR