NEW macbook pro power cord not working

I just bought my macbook pro 3 weeks ago and for some reason my power cord is not working to charge the computer. There doesn't appear to be any damage to it and I've tried plugging it in to different outlets etc. and no luck. I noticed one day that it was blinking on and off from charging and not charging and then the next day it just stopped working completely. Is this a common thing? Should I just go buy a new one?

Welcome to Apple Discussions!
Your power adaptor is under warranty as well as your new Mac. If it isn't working, Apple should replace it for free under warranty.
You might want to try resetting the SMC:
http://support.apple.com/kb/HT1411?viewlocale=en_US
This is likely the first thing they would do at the Apple Store, and it may well solve the charging problem.
Good luck!

Similar Messages

  • Macbook pro power cord not working and its under warranty

    Whats the number or email address of who I contact please?

    Read here, & select your country:
    http://www.apple.com/support/contact/
    There is no email support.

  • New Macbook Pro number keys not working

    Hi everyone,
    I have a brand new macbook pro (running 10.6.4) who's number keys suddenly stopped working. The keys from 1 through 9 do not respond at all. Neither does holding down shift, while pressing them. The key rows below and above them work fine. I have the newest updates on the machine, and have restarted multiple times.
    Any suggestions would be greatly appreciated!
    Thanks!

    This same issue happens to me frequently. I've lived with it for the most part just because I didn't want to spend my time running down Apple's glitch. I can not tell if it is a hardware, firmware, or software issue. I have a case number which is 163792369 that I've had since June. I've never taken it in because it is not consistent. I'm leaning towards an OS glitch. I have searched Apple's archives and found one reference to it happening on an earlier version of OS-X, but I was afraid to install the patch because of version differences. Please let me know if you get a solution from the customer support. It is somewhat frustrating as this is my first experience with a Mac and I understand it's a complex piece of machinery from a hardware and software perspective, but fresh out of the box the freak'in keys should work.
    Thanks,
    Shawn A. Peterson
    It just works??? Most of the time.

  • New MacBook Pro with mavericks not working with cs4

    I Try to open my apps and I get the error: licensthus for this product has stopped working error 150:30. Not sure how to resolve the issue. I installed the new java and restarted and still same issue. Do I need to reinstall software?

    I Try to open my apps and I get the error: licensthus for this product has stopped working error 150:30. Not sure how to resolve the issue. I installed the new java and restarted and still same issue. Do I need to reinstall software?

  • 10.6.4. and new macbook pro i7  Tethering not working on the 5D Mk II

    I have updated to 10.6.4 and I am running Aperture 3.0.3. When I plug in my Canon 5D Mk II and start a tethering session the HUD shows my camera is connected and I can hit the capture button and it does take a picture but, nothing happens after that. The image is not imported. The photo does appear on the card though.

    This same issue happens to me frequently. I've lived with it for the most part just because I didn't want to spend my time running down Apple's glitch. I can not tell if it is a hardware, firmware, or software issue. I have a case number which is 163792369 that I've had since June. I've never taken it in because it is not consistent. I'm leaning towards an OS glitch. I have searched Apple's archives and found one reference to it happening on an earlier version of OS-X, but I was afraid to install the patch because of version differences. Please let me know if you get a solution from the customer support. It is somewhat frustrating as this is my first experience with a Mac and I understand it's a complex piece of machinery from a hardware and software perspective, but fresh out of the box the freak'in keys should work.
    Thanks,
    Shawn A. Peterson
    It just works??? Most of the time.

  • My brand new MacBook Pro retina display not charging the battery any more after 3 weeks...no green or red Led. Any one now about this problem? Thanks

    My brand new MacBook Pro retina display not charging the battery any more after 3 weeks...no green or red Led. Any one now about this problem? Thanks

    Either the power brick is damaged, or the charging circuit is on the blink, or both. Either way, a trip to the Apple Store or the Apple Authorized Service Provider is in order, as this ain't no bargain basement toy.
    In the meantime, can attempt an SMC Reset to see if it helps.

  • I HATE my new MACBOOK PRO, it will not let me open any PDF files and I downloaded the ADOBE READER three freaking times and it keeps saying that all the files are corrupt. I would rather have my 2008 Dell at this point. what is wrong with this thing

    I HATE my new MACBOOK PRO, it will not let me open any PDF files and I downloaded the ADOBE READER three freaking times and it keeps saying that all the files are corrupt or damaged. I would rather have my 2008 Dell at this point. what is wrong with this thing

    Perhaps the PDF files are corrupted.
    Hit the command key and spacebar, a blue Spotlight in the upper right hand corner appears, now type Preview and press return on the Preview program.
    Now you can try opening the PDF's from the file menu and see what's going on.
    If they are corrupted, perhaps they are trojans from your Windows PC or gotten from a bad location online.
    Download the free ClamXav and run a scan on the possibly infected folder.

  • I have a Serial Number which worked fine on my MacBook Pro but does not work on my desktop PC (Win 7).  What is the problem?

    I have a Serial Number which worked fine on my MacBook Pro but does not work on my desktop PC (Win 7).  What is the problem?

    You haven't identified the version so I can't tell if offering you contact options for Adobe Support will be of use to you.  But they will likely be your only hope of getting resolution unless you just happen to be using the wrong number as the serial number.
    For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )
    Phone support | Orders, returns exchanges
    http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • My macbook pro external speaker not working! help please

    My macbook pro external speaker not working! help please

    1. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
         Pllug in the speakers.
         Do they show up?
         Make sure that Mute is not enabled.
    2. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • HT201240 I have a new macbook pro that did not have a disk, OS X was pre installed  so how can i change the administrators name and password, it did not migrate properly from my hard drive.., so how do i

    I have a new macbook pro that did not have a disk, OS X lion 7.3.4 was pre installed  so how can i change the administrators name and password, it did not migrate properly from my hard drive.., now there is some mysterious administrator name and or password??

    See #5
    Step by Step to fix your Mac

  • My macbook pro retina is not working camera after updating Mountain lion.

    My macbook pro retina is not working camera after updating Mountain lion.
    I have also updated to latest update 10.8.1. Still its the same.

    Reset SMC.  http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • Using a Huawei datacard. Didnt have problems with my old Macbook.  My new MacBook Pro sometimes does not recognise it

    Using a Huawei datacard. Didnt have problems with my old Macbook.  My new MacBook Pro sometimes does not recognise it and Message flashes "Device disconnected or not available

    Hi
    Hope you found a solution by now.
    I reply because others might encounter the same problem.
    Mine was the one described here:
    https://discussions.apple.com/thread/2656776?start=0&tstart=0
    I also installed the latest version ov Mobile Partner (16.x)
    Cheers,
    Nick

  • Brand new macbook pro - iTunes does not recognize multiple speakers, my older macs work correctly

    New macbook pro with iTunes 10.5.2.  OS 10.7.2    Setting up iTunes.
    Two speakers on Airport devices.
    Switch at bottom right shows all of the speakers above the line, and "multiple speakers" below the line.  The two speakers on the airport devices are #3 and #4 on the list above the line.  (i.e. ITunes is aware that these airport speakers exist).
    I can click on single airport speakers above the line, and ITunes connects.
    When I click on "multiple speakers", I get "computer" and the first listing which is a printer hooked up on an airport express link.  Also get the separate volume controls etc.  The third and fourth entries on the list (i.e. the airport speakers) are not displayed on the multiple speakers list.
    So I can connect to one speaker at a time, e.g. the computer, or any other speaker, but I cannot connect to multiple speakers.
    I have two other macs and have never had this problem with hooking up to the multiple speakers.
    Thanks for any help.

    Same here - the problem is - it was working for a few days after I've upgraded iTunes to version 10, and then yesterday - I've rent the movie from Apple Store and once downloaded with iTunes - I wanted to transfer it to my ATV - however - my link to ATV suddently disappeared. What a piece of Crap. I can't describe my frustration - apple products aren't cheap and they always come with some kind of problem - what the **** is going on - it's not just the design people are looking for but also functional products.
    Yesterday I've tried to turn of ATV, remove link from iTunes, start ATV make new connection to iTunes, start up iTunes - ATV shows up, code put in and at this stage I thought it finally works - but hey - forget it - I'm trying to put the purchased rental onto ATV and I get an alert saying that my firewall (which I have none) is stopping me from syncing. I then go to the support page which explains how to deal with it - but on some very old version of the system - my system (Snow Leopard) doesn't have those options any more. So as far I I'm concerned I'm screwed unless they fix the problem with their software.
    If you guys know of any possible solution to this problem (and I did read many forum topics already - none of which works) - then please let me know.

  • Macbook Pro  audio port not working.

    I  purchased a new Macbook Pro notebook about 4 weeks back. The audio port for headset does not work. I tried calling their support. Before I could speak to someone I was kept idenfinitely on hold for more than 10 minutes. I then disconnected. Terrrible service for the price they charge for their products.
    Please help me solve the audio problem.

    Have you tried a PRAM rest?
    http://support.apple.com/kb/ht1379
    Ciao.

  • Error on new macbook pro: requested resource not found

    hey everyone,
    i just purchased a new macbook pro yesterday. im trying to download movies for a flight, but i can't even sign in (or authorize) my new comp with the apple store. when i try to do either i get an error message, +"we could not complete your request the request resource was not found"+
    the weird thing is my itunes works fine on my imac. i was able to buy a tv episode earlier today no problem. both itunes versions (on both comps) is up to date.
    ive read old threads where some suggested that itunes was down and/or to exit itunes and log back in. i don't think itunes is down b/c it works fine on my imac (just tried a few minutes ago). i tried exiting itunes on both comps and still no luck.
    any suggestions?

    ok i just tried it again, for like the 50th time, and it magically worked.

Maybe you are looking for

  • Synching uimodel with the viewobject

    Is there a way to synch a uimodel with the viewobject ? The issue I have is, I have several attributes in my viewobject that I do not have the need to use in my application, I want to remove those attributes from the viewobject and anticipated that t

  • IDoc delta loads using the program RBDMIDOC

    Hi ALL, We are doing some delta loads for ALE-IDOC using the program RBDMIDOC and we are using the message type HRMD_A.Under this message type we have configured two diff distribution models with different infotype data. So when we execute the progra

  • Trouble with LeadUpdate

    In attempting to run a lead update, I got the following exception in Visual Studio(C#) As determined by the first instance, all subsequent instances of integration component 'Lead_Action' should use the same user key 'User Key:1'(SBL-EAI-04404) The c

  • Javascript in Captivate 6.1?

    I have been unable to get any javascript to work in Captivate. Adding a simple statement to a button on click for instance, none of these variations work: window.open('http://google.com') window.open('http://google.com'); window.open("http://google.c

  • Can no longer name files when i save them

    When i hit Save As there used to be a bar where you could name your file.  No there is no longer that option so i just names my word document whatever the first few words are.  On top of that, there used to be a drop-down menu where you could choose