New Macbook Pro transfer from old Macbook Pro

who do i get the site i had built already on my old macbook to my new one?
thanks in advance.

I have my old mac plugged into my new one, and I can't seem to get to the window that looks like the one you showed me.
Don't bother with the window. Put the path listed above into the Go to Folder commands on both computers, or if you're using FireWire Target Disk mode, use it only on the newer one and navigate to the path from your account's home folder in the Users folder on the old computer's HD.
(48849)

Similar Messages

CS5 Design Standard. Will not activate on new HDD following transfer from old HDD. Shows Error 213.10 Have serial number/s etc.

I recently encountered a problem with a HDD drive. So I had to replace it with a new one. Fortunately I managed to recover the data and applications on the original drive.
However when I transferred and installed the Adobe CS5 Design Standard suite on the new HDD it will not open any of the Adobe applications.
It prompts an error 213.10 each time. I can't see where to deactivate or reactivate.. please advise suggested course of action.
Also, will I be able to successfully access my previous files after the reinstallation/activation?
Many thanks
R

Reinstall properly. Activation cannot work because in the technical sense it simply isn't there. You screwed it. Run teh cleaner tool if necessary and contact support to reset activations.
Download CS5 products
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium

Changed hard drive... How do I transfer from old hard drive to new hard drive

hanged hard drive... How do I transfer from old hard drive to new hard drive.
I have installed the new hardrive on my macbook and reinstalled the software... how do I transfer the information form the old drive to
the new one.
?can I put the old drive in another macbook and connect via firewire???
Thanks

Put the old hardrive in an external hardrive case....like this...
eshop.macsales.com/shop/firewire/on-the-go
.....this is just an example their are less expensive models....

HT4061 do we have to wait for transfer from old I-phone to new from Apple?

Do we have to wait for transfer from old I-phone to new from Apple?

Hi Argyll2bikes,
Welcome to the forum. It unfortunate that there is so much extra work needed before we can supply you with telephone service. I am sorry about this. As you have placed an order for service it is incorrect for us to tell you that you need to get permission from the landowner to cut down the tree. This should all be handled between BT and Openreach.
I would like to get your details so I can find out exactly what is going on here. Please drop me an email via the 'Contact Us' link in my profile. (click on my name and you will find the link under the "about me" section). Include your BT account details and the link to this thread.
Cheers
Sean
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

How do you transfer from old ipad to new ipad

How do you transfer from old ipad to new ipad

How to Transfer Everything from an Old iPad to New iPad
http://osxdaily.com/2012/03/16/transfer-old-ipad-to-new-ipad/
 Cheers, Tom

Have CS5 on current PC, Win 7 64bit; how get *.exe to transfer to new computer after remove from old one

Have CS5 on current PC, Win 7 64bit; how get *.exe to transfer to new computer after remove from old one?

Baffled by multiple links; found one I think(?) I need. CS5 12.1.
It's basic, so I assume that one goes with CS5 Design Standard, but do not
know. Thanks for answer(s) again.
On Tue, Feb 17, 2015 at 10:36 AM, BobLevine <[email protected]>

New Hire Data Transfer from E-Rec to ECC via PA48

Hi,
We have requirement where we need to use the basic new hire data transfer from erec to ecc using PA48.
Could someone help me by listing the step by step process that is required to configure in both EREC & ECC?
I know there is pdf document available online but that refers mostly to XI which we are not planning to use.
Please help.
Regards,
Vikram

Hi,
For integration between E-Rec and ECC, check [Link|http://help.sap.com/saphelp_erp2005/helpdata/en/45/8150635e9c40c1e10000000a1553f7/frameset.htm]
This gives detailed information on synchronous and asynchronous data transfers between E-Rec and ECC.
Hope it helps!
Arpita

I bought a new MacBookPro moved everything from old MacBookPro, new machine runs 10.6.7 - but iPhoto won't 'upgrade' the library - just hangs up supposedly while writing new library. help. thanks.

i bought a new MacBookPro moved everything from old MacBookPro, new machine runs 10.6.7 - but iPhoto won't 'upgrade' the library - just hangs up supposedly while writing new library. help. thanks.

How did you "move everything" over?
Migration assistance does not handle the iPhoto library well sometimes - the best way is to drag the bad iphoto library from the pictures folder on the new system to the desktop, connect the two systems together (network, firewire target mode, etc) and drag the iPhoto library intact as a single entity from the old system to the pictures folder of the new system and launch iPhoto on the new system - it will open and convert the iPhoto library as necessary and you will be fine - once you test the iPhoto library you can delete the one on the desktop
LN

New password must differ from old password by at least 9999 characters.

Hi All,
When logging into my Apex as admin ( https://server/apex/apex_admin ) , I was asked to changed the password which I did but then I received the error "New password must differ from old password by at least 9999 characters". Apparently I made some wrong settings in the password policies before, but now I am stuck. I have the admin password, but I cannot go pass the change-passsword page.
Is there a way that I can reset the password policy from the command line ?
My Apex is 4.2.2 on Linux RHEL 6.3.
Thanks,
Vu

Hi and Welcome to the Forums!
Even though things switched over via DTM, it sounds like something on your carrier side has not yet fully switched over. I suggest you contact them for formal assistance as they manage your BIS account and need to ensure that things have properly shifted over on their side.
FYI -- the credentials it is asking for have nothing to do with your email accounts. These credentials are your BIS account credentials (the account I mentioned above). BIS stores all of your email credentials so that it can perform as true PUSH from the perspective of the BB. But, to protect those, it further has credentials to get into the BIS account itself...and these are the credentials it is requesting.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

File transfer from old G4 iBook to new MacBook Pro

I hope this is the right place for this post/question....
I am trying to do a file migration from my old iBook G4 PPC to my new MacBook Pro. The iBook does not have the migration utility and when I put the new OSX DVD in from my MacBook (as instructed to do in the Migration utility's steps) it does not read it (presumably because it is not the right processor, etc) so I had no luck doing the computer to computer transfer. I do not have the "Time Machine" utility on the old computer and using my regular back-up did not allow me to migrate using the "other drive" option (MacBook never saw the drive in the utility, but does mount it and allow me to access it as a drive). I can do this the hard way, file by file, but I have a couple of concerns that I want to check on before I spend hours going down a bad path.
1) I have thousands of songs in my iTunes... can I drag and drop these? What about my play lists?
2) iPhoto - I have thousands of photos - how do I easily transfer those over in their respective scrapbooks?
3) Bookmarks, I can deal with by trying to find the file and importing them, or doing it manually, although there are a lot of them. Easier way?
4) Outlook - I can try to export and import using the built in features, but not sure if that will pull all the folders and structure.
Those are the big ones... I have had this computer for 8 years, so it is pretty embedded in my life and I am hoping for a utility or something that will help this process.
Thanks in advance for any help.
Keith

The migration utility in the newer computer's OS X would usually allow
the older Mac's info to be pulled into the new computer; the installer
disc for the new Mac won't do anything for the old PPC Mac since it
would be unreadable. Intel-based Mac machine-specific discs won't
work in PPC-based Macs; and in general different machines can't
or won't use the install-restore discs from other models.
There may have been a way via ethernet, usb or firewire to share files
using a System Preference panel setting to facilitate this action. The
suggested method should be adequate. You can also put an iTunes
library and iPhoto library on a suitable external drive to par-down the
content and reduce clutter in a portable computer's hard disk drive
and still be able to access those carefully moved libraries from there.
Some good support documents in Apple Support tell how to do this.
In Firefox, you will have to rename the old folder of bookmarks to the
same name as the existing new apps folder for them to be seen. I
just replaced folders, carefully, so if that didn't work the first time, the
items were easy to find and try again later. Once you get the folder,
the contents should appear in the new browser version as they had
in the older one, to some extent, after the file or contents are moved.
Good luck & happy computing!

Transfer from old iMac Blueberry 266 to MacBook

A shiny new MacBook is about to arrive, replacing my 2nd Mac in the household, an older iMac 266 Rev C.
The older iMac does not have a firewire port, so I can not use the SetUp/Migration Asssitant to transfer files/info.
I do have a Crossover cable, so I can connect the two machines. I have 10.3.9 on the old Mac, 10.4.10 on the new
My question is as follows:
- What directories I need to copy in order by bring over MSOffice and Quickbooks from the old to the new? I need to carry over license info for both apps.
I do not want to copy over the System folder....
Thanks in advance!
Rob

MS Office should transfer as a self contained entity from the Applications Microsoft Office folder if it is a version made for mac OS X. Note, you can't have it on both machines at once. Quickbooks I don't know.
Also your Documents folder has a Microsoft User folder you want to transfer over, so Entourage information if you used it gets transferred over too. I for one would move away from Entourage, because it can get data corrupted very easily. If you want to know how, I can direct you to a FAQ.

Some video files won't transfer from old Macbook to Macbook Air

Hi all,
My old Macbook (circa 2008) recently stopped working, so I upgraded to a new Macbook Air. I had the harddrive of my old Macbook extracted and made into an external harddrive, and then used Migration Assistant to transfer my data to the Macbook Air. I then upgraded to OS X 10.9. However, I have found that several video files I had saved on my old Mabook do not appear on my Macbook Air. These are a mix of .mpeg and .avi files. I reconnected the external harddrive and located these files on it, and tried copying them to my Macbook Air one by one, but they won't transfer and I recieve the error message that the operation cannot be completed because the file is in use. I can play them in quicktime or VLC direct from the external harddrive, but can't save them to my Macbook Air. I tried restarting my computer, reconnecting the hard drive and so on, but to no avail. I tried transferring other videos that had come accross with Migration Assistant, and these copy to my Macbook Air without any trouble. But the files that didn't get transferred just won't. Is there anything I can do to get these files onto my new computer?
Any help is appreciated!

Open the library on the EHD with the Finder as shown in this screenshot
and look in the Masters folder to see if any of the original files have zero bytes? Do not make any other changes/alterations, i.e. look but don't touch. If you do find zero byte image files then it's not the copy process that is the culprit but the files are bad to start with.
OT

Applications didn't transfer from old hard drive to new hard drive

My MacBook Pro recently got water damage but I managed to save the hard drive. After purchasing a new MacBook Pro I used Migration Assistant to move the contents from my old hard drive to my new one. Everything transferred except for a few of my applications such as Adobe Lightroom, Microsoft Word, which are the more important ones that are harder to replace, as well as my apps from the app store which isn't a concern. Since I do not want to purchase Microsoft Word again or go through the hassle of getting Lightroom back on here I was wondering if there is a simpler way to transfer these?
Thanks

Zlig said, "Hi, you should be able to do this no problem. You can go for an inexpensive USB2 enclosure and use "Migration Assistant" to import your stuff across during setup of the new machine."
No, don't use Migration Assistant from a PPC to an Intel Mac. See Basic Guide to Migrating to Intel Macs here:
http://discussions.apple.com/thread.jspa?threadID=435350&tstart=10

Transfer from old to new Mac impossible

I can't transfer the information from old G5 to a new Mac Pro 8 core. Using T mode, as described, transfer doesn't occur after two hours at all. There is a window "Transferring information" but nothing happens. Using SuperDuper! or Migration Assistant from OS10.4.10 to copy the entire bootable volume from the external HD, is impossible. However, it's possible to copy the old volume to a second, non startup disk, but without libraries, which is worthless.
Do I have to manually transfer the libraries to the new computer in order to use the old applications? It's going to take for ever. I have no idea why the simple transfer from the old Mac to the new doesn't work as advertise.
Milan

When you booted up the new machine the first time, did you use the migration assistant? If not, you might want to try using the Restore disk and restore the Mac Pro to its factory state. Also, take a look at:
http://docs.info.apple.com/article.html?artnum=25773 and A Basic Guide for Migrating to Intel-Macs. Those should get you started in the right direction.

ITunes transfer from old pc to new pc

Hi, I have not sync my iphone to my old pc for the past 6 month. But my old pc just died last night. I am able to get back my iTunes backup from the old pc but the data inside is the backup i sync 6 month ago. So my question is if i transfer the backup from my old PC to my new PC and then sync my iphone with the new PC, will the itune in my new PC overwrite my iphone with these data i sync 6 month back OR my iphone will backup the latest data into the new pc itunes?

From your Old computer...
Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Full Details here > http://support.apple.com/kb/HT1751
An Added Bonus is that you will have a Backup of iTunes.

Backup and data transfer from old to new iphone

I recently upgraded to the iphone 5s from iphone 4 and need to backup and transfer data from old phone to the new phone. I want to backup using itunes rather than using icloud. Do I need to disable icloud backup on the old phone before I start the backup process. Do I need to disable anything on my computer (icloud). I am using Windows Vista and Itunes Version 10.7. Would appreciate step by step instructions for backup and transfer.. I am not computer or iphone saavy and don't want to mess things up.

If you backup with iTunes and you restored from the backup and the data are gone, then there is no where to retrieve them from unless you have another backup that contains those data.
Launch iTunes on the computer and go to iTunes>Preferences>Devices. You will see a window with all of your backups listed in it.
If you see a recent backup that you are certain contains the data that you need, recover deleted data from iPhone backup.
If your note is gone from iCloud.com there is only a few ways to possibly recover it.
The first things I would check is a iCloud Backup, a iTunes Backup, or a 3rd party email that may have contained the note. To restore from a iCloud or iTunes backup follow this link. This article explains how to restore a device from either back up.
Note if you have backed up since the note went missing, you will not have the note on the backup. Make sure you do not back up if trying to restore from a back up as this will back up the content without the note.
To get to the "Set up assistant" on an iOS device, you must go to Settings>General>Reset>Erase All Content and Settings. Once the phone restarts, you will be at the "Set up Assistant"

New Macbook Pro transfer from old Macbook Pro

Similar Messages

Maybe you are looking for